Ce contenu n'est pas disponible dans la langue sélectionnée.

18.9. Creating a Virtual Network

To create a virtual network on your system:

Open the Virtual Networks tab from within the Connection Details menu. Click the Add Network button, identified by a plus sign (+) icon. For more information, refer to Section 18.8, “Managing a Virtual Network”.

View larger image

Figure 18.12. Virtual network configuration
This will open the Create a new virtual network window. Click Forward to continue.

View larger image

Figure 18.13. Creating a new virtual network
Enter an appropriate name for your virtual network and click Forward.

View larger image

Figure 18.14. Naming your virtual network
Enter an IPv4 address space for your virtual network and click Forward.

View larger image

Figure 18.15. Choosing an IPv4 address space
Define the DHCP range for your virtual network by specifying a Start and End range of IP addresses. Click Forward to continue.

View larger image

Figure 18.16. Selecting the DHCP range
Select how the virtual network should connect to the physical network.

View larger image

Figure 18.17. Connecting to physical network
If you select Forwarding to physical network, choose whether the Destination should be Any physical device or a specific physical device. Also select whether the Mode should be NAT or Routed.
Click Forward to continue.
You are now ready to create the network. Check the configuration of your network and click Finish.

View larger image

Figure 18.18. Ready to create network
The new virtual network is now available in the Virtual Networks tab of the Connection Details window.