Chapter 10. Adding more RHEL compute machines to an OpenShift Container Platform cluster

1. On each host, register with RHSM:

   # subscription-manager register --username=<user_name> --password=<password>

2. Pull the latest subscription data from RHSM:

   # subscription-manager refresh

3. List the available subscriptions:

   # subscription-manager list --available --matches '*OpenShift*'

4. In the output for the previous command, find the pool ID for an OpenShift Container Platform subscription and attach it:

   # subscription-manager attach --pool=<pool_id>

5. Disable all yum repositories:

   1. Disable all the enabled RHSM repositories:

      # subscription-manager repos --disable="*"

   2. List the remaining yum repositories and note their names under repo id, if any:

      # yum repolist

   3. Use yum-config-manager to disable the remaining yum repositories:

      # yum-config-manager --disable <repo_id>

      Alternatively, disable all repositories:

      # yum-config-manager --disable \*

      Note that this might take a few minutes if you have a large number of available repositories

6. Enable only the repositories required by OpenShift Container Platform 4.17:

   # subscription-manager repos \
       --enable="rhel-8-for-x86_64-baseos-rpms" \
       --enable="rhel-8-for-x86_64-appstream-rpms" \
       --enable="rhocp-4.17-for-rhel-8-x86_64-rpms" \
       --enable="fast-datapath-for-rhel-8-x86_64-rpms"

7. Stop and disable firewalld on the host:

   # systemctl disable --now firewalld.service

   Note

   You must not enable firewalld later. If you do, you cannot access OpenShift Container Platform logs on the worker.

Procedure

1. From the AWS IAM console, create your desired IAM role.
2. Attach the IAM role to the desired worker node.

Procedure

1. Open the Ansible inventory file at /<path>/inventory/hosts that defines your compute machine hosts and required variables.
2. Rename the [new_workers] section of the file to [workers].

3. Add a [new_workers] section to the file and define the fully-qualified domain names for each new host. The file resembles the following example:

   [all:vars]
   ansible_user=root
   #ansible_become=True
   
   openshift_kubeconfig_path="~/.kube/config"
   
   [workers]
   mycluster-rhel8-0.example.com
   mycluster-rhel8-1.example.com
   
   [new_workers]
   mycluster-rhel8-2.example.com
   mycluster-rhel8-3.example.com

   In this example, the mycluster-rhel8-0.example.com and mycluster-rhel8-1.example.com machines are in the cluster and you add the mycluster-rhel8-2.example.com and mycluster-rhel8-3.example.com machines.

4. Navigate to the Ansible playbook directory:

   $ cd /usr/share/ansible/openshift-ansible

5. Run the scaleup playbook:

   $ ansible-playbook -i /<path>/inventory/hosts playbooks/scaleup.yml 1

   1

   For <path>, specify the path to the Ansible inventory file that you created.

Procedure

1. Confirm that the cluster recognizes the machines:

   $ oc get nodes

   Example output

   NAME      STATUS    ROLES   AGE  VERSION
   master-0  Ready     master  63m  v1.30.3
   master-1  Ready     master  63m  v1.30.3
   master-2  Ready     master  64m  v1.30.3

   The output lists all of the machines that you created.

   Note

   The preceding output might not include the compute nodes, also known as worker nodes, until some CSRs are approved.

2. Review the pending CSRs and ensure that you see the client requests with the Pending or Approved status for each machine that you added to the cluster:

   $ oc get csr

   Example output

   NAME        AGE     REQUESTOR                                                                   CONDITION
   csr-8b2br   15m     system:serviceaccount:openshift-machine-config-operator:node-bootstrapper   Pending
   csr-8vnps   15m     system:serviceaccount:openshift-machine-config-operator:node-bootstrapper   Pending
   ...

   In this example, two machines are joining the cluster. You might see more approved CSRs in the list.

3. If the CSRs were not approved, after all of the pending CSRs for the machines you added are in Pending status, approve the CSRs for your cluster machines:

   Note

   Because the CSRs rotate automatically, approve your CSRs within an hour of adding the machines to the cluster. If you do not approve them within an hour, the certificates will rotate, and more than two certificates will be present for each node. You must approve all of these certificates. After the client CSR is approved, the Kubelet creates a secondary CSR for the serving certificate, which requires manual approval. Then, subsequent serving certificate renewal requests are automatically approved by the machine-approver if the Kubelet requests a new certificate with identical parameters.

   Note

   For clusters running on platforms that are not machine API enabled, such as bare metal and other user-provisioned infrastructure, you must implement a method of automatically approving the kubelet serving certificate requests (CSRs). If a request is not approved, then the oc exec, oc rsh, and oc logs commands cannot succeed, because a serving certificate is required when the API server connects to the kubelet. Any operation that contacts the Kubelet endpoint requires this certificate approval to be in place. The method must watch for new CSRs, confirm that the CSR was submitted by the node-bootstrapper service account in the system:node or system:admin groups, and confirm the identity of the node.

   • To approve them individually, run the following command for each valid CSR:

     $ oc adm certificate approve <csr_name> 1

     1

     <csr_name> is the name of a CSR from the list of current CSRs.

   • To approve all pending CSRs, run the following command:

     $ oc get csr -o go-template='{{range .items}}{{if not .status}}{{.metadata.name}}{{"\n"}}{{end}}{{end}}' | xargs --no-run-if-empty oc adm certificate approve

     Note

     Some Operators might not become available until some CSRs are approved.

4. Now that your client requests are approved, you must review the server requests for each machine that you added to the cluster:

   $ oc get csr

   Example output

   NAME        AGE     REQUESTOR                                                                   CONDITION
   csr-bfd72   5m26s   system:node:ip-10-0-50-126.us-east-2.compute.internal                       Pending
   csr-c57lv   5m26s   system:node:ip-10-0-95-157.us-east-2.compute.internal                       Pending
   ...

5. If the remaining CSRs are not approved, and are in the Pending status, approve the CSRs for your cluster machines:

   • To approve them individually, run the following command for each valid CSR:

     $ oc adm certificate approve <csr_name> 1

     1

     <csr_name> is the name of a CSR from the list of current CSRs.

   • To approve all pending CSRs, run the following command:

     $ oc get csr -o go-template='{{range .items}}{{if not .status}}{{.metadata.name}}{{"\n"}}{{end}}{{end}}' | xargs oc adm certificate approve

6. After all client and server CSRs have been approved, the machines have the Ready status. Verify this by running the following command:

   $ oc get nodes

   Example output

   NAME      STATUS    ROLES   AGE  VERSION
   master-0  Ready     master  73m  v1.30.3
   master-1  Ready     master  73m  v1.30.3
   master-2  Ready     master  74m  v1.30.3
   worker-0  Ready     worker  11m  v1.30.3
   worker-1  Ready     worker  11m  v1.30.3

   Note

   It can take a few minutes after approval of the server CSRs for the machines to transition to the Ready status.