Chapter 11. Functions

To enable the use of OpenShift Serverless Functions on your cluster, you must complete the following steps:

To use advanced container management features, you might want to use podman with OpenShift Serverless Functions. To do so, you need to start the podman service and configure the Knative (kn) CLI to connect to it.

Before you can complete the following procedures, you must ensure that you have completed all of the prerequisite tasks in Setting up OpenShift Serverless Functions.

Before you can build and deploy a function, you must create it by using the Knative (kn) CLI. You can specify the path, runtime, template, and image registry as flags on the command line, or use the -c flag to start the interactive experience in the terminal.

You can use the kn func run command to run a function locally in the current directory or in the directory specified by the --path flag. If the function that you are running has never previously been built, or if the project files have been modified since the last time it was built, the kn func run command builds the function before running it by default.

$ kn func run

$ kn func run --path=<directory_path>

You can also force a rebuild of an existing image before running the function, even if there have been no changes to the project files, by using the --build flag:

$ kn func run --build

If you set the build flag as false, this disables building of the image, and runs the function using the previously built image:

$ kn func run --build=false

You can use the help command to learn more about kn func run command options:

$ kn func help run

Before you can run a function, you must build the function project. If you are using the kn func run command, the function is built automatically. However, you can use the kn func build command to build a function without running it, which can be useful for advanced users or debugging scenarios.

The kn func build command creates an OCI container image that can be run locally on your computer or on an OpenShift Container Platform cluster. This command uses the function project name and the image registry name to construct a fully qualified image name for your function.

$ kn func build

$ kn func build --builder pack

$ kn func build

Building function image
Function image has been built, image: registry.redhat.io/example/example-function:latest

$ kn func build --registry quay.io/username

Building function image
Function image has been built, image: quay.io/username/example-function:latest

$ kn func build --push

$ kn func help build

You can use the Knative (kn) CLI to initiate a function project build and then deploy the function directly on the cluster. To build a function project in this way, the source code for your function project must exist in a Git repository branch that is accessible to your cluster.

You can deploy a function to your cluster as a Knative service by using the kn func deploy command. If the targeted function is already deployed, it is updated with a new container image that is pushed to a container image registry, and the Knative service is updated.

You can use the kn func invoke CLI command to send a test request to invoke a function either locally or on your OpenShift Container Platform cluster. This command can be used to test that a function is working and able to receive events correctly.

$ kn func invoke

The kn func invoke command executes on the local directory by default, and assumes that this directory is a function project.

When you create a Node.js function using the Knative (kn) CLI, the project directory looks like a typical Node.js project. The only exception is the additional func.yaml file, which is used to configure the function.

Both http and event trigger functions have the same template structure:

.
├── func.yaml 1
├── index.js 2
├── package.json 3
├── README.md
└── test 4
    ├── integration.js
    └── unit.js

When using the Knative (kn) CLI to create a function project, you can generate a project that responds to CloudEvents, or one that responds to simple HTTP requests. CloudEvents in Knative are transported over HTTP as a POST request, so both function types listen for and respond to incoming HTTP events.

Node.js functions can be invoked with a simple HTTP request. When an incoming request is received, functions are invoked with a context object as the first parameter.

function handle(context, data)

// Expects to receive a CloudEvent with customer data
function handle(context, customer) {
  // process the customer
  const processed = handle(customer);
  return context.cloudEventResponse(customer)
    .source('/handle')
    .type('fn.process.customer')
    .response();
}

{
  "customerId": "0123456",
  "productId": "6543210"
}

function handle(context, data)

Functions can return any valid JavaScript type or can have no return value. When a function has no return value specified, and no failure is indicated, the caller receives a 204 No Content response.

Functions can also return a CloudEvent or a Message object in order to push events into the Knative Eventing system. In this case, the developer is not required to understand or implement the CloudEvent messaging specification. Headers and other relevant information from the returned values are extracted and sent with the response.

function handle(context, customer) {
  // process customer and return a new CloudEvent
  return new CloudEvent({
    source: 'customer.processor',
    type: 'customer.processed'
  })
}

function handle(context, customer) {
  // process customer and return custom headers
  // the response will be '204 No content'
  return { headers: { customerid: customer.id } };
}

function handle(context, customer) {
  // process customer
  if (customer.restricted) {
    return { statusCode: 451 }
  }
}

function handle(context, customer) {
  // process customer
  if (customer.restricted) {
    const err = new Error(‘Unavailable for legal reasons’);
    err.statusCode = 451;
    throw err;
  }
}

Node.js functions can be tested locally on your computer. In the default project that is created when you create a function by using kn func create, there is a test folder that contains some simple unit and integration tests.

When you create a TypeScript function using the Knative (kn) CLI, the project directory looks like a typical TypeScript project. The only exception is the additional func.yaml file, which is used for configuring the function.

Both http and event trigger functions have the same template structure:

.
├── func.yaml 1
├── package.json 2
├── package-lock.json
├── README.md
├── src
│   └── index.ts 3
├── test 4
│   ├── integration.ts
│   └── unit.ts
└── tsconfig.json

When using the Knative (kn) CLI to create a function project, you can generate a project that responds to CloudEvents or one that responds to simple HTTP requests. CloudEvents in Knative are transported over HTTP as a POST request, so both function types listen for and respond to incoming HTTP events.

TypeScript functions can be invoked with a simple HTTP request. When an incoming request is received, functions are invoked with a context object as the first parameter.

function handle(context:Context): string

// Expects to receive a CloudEvent with customer data
export function handle(context: Context, cloudevent?: CloudEvent): CloudEvent {
  // process the customer
  const customer = cloudevent.data;
  const processed = processCustomer(customer);
  return context.cloudEventResponse(customer)
    .source('/customer/process')
    .type('customer.processed')
    .response();
}

// Invokable is the expeted Function signature for user functions
export interface Invokable {
    (context: Context, cloudevent?: CloudEvent): any
}

// Logger can be used for structural logging to the console
export interface Logger {
  debug: (msg: any) => void,
  info:  (msg: any) => void,
  warn:  (msg: any) => void,
  error: (msg: any) => void,
  fatal: (msg: any) => void,
  trace: (msg: any) => void,
}

// Context represents the function invocation context, and provides
// access to the event itself as well as raw HTTP objects.
export interface Context {
    log: Logger;
    req: IncomingMessage;
    query?: Record<string, any>;
    body?: Record<string, any>|string;
    method: string;
    headers: IncomingHttpHeaders;
    httpVersion: string;
    httpVersionMajor: number;
    httpVersionMinor: number;
    cloudevent: CloudEvent;
    cloudEventResponse(data: string|object): CloudEventResponse;
}

// CloudEventResponse is a convenience class used to create
// CloudEvents on function returns
export interface CloudEventResponse {
    id(id: string): CloudEventResponse;
    source(source: string): CloudEventResponse;
    type(type: string): CloudEventResponse;
    version(version: string): CloudEventResponse;
    response(): CloudEvent;
}

{
  "customerId": "0123456",
  "productId": "6543210"
}

function handle(context: Context, cloudevent?: CloudEvent): CloudEvent

Functions can return any valid JavaScript type or can have no return value. When a function has no return value specified, and no failure is indicated, the caller receives a 204 No Content response.

Functions can also return a CloudEvent or a Message object in order to push events into the Knative Eventing system. In this case, the developer is not required to understand or implement the CloudEvent messaging specification. Headers and other relevant information from the returned values are extracted and sent with the response.

export const handle: Invokable = function (
  context: Context,
  cloudevent?: CloudEvent
): Message {
  // process customer and return a new CloudEvent
  const customer = cloudevent.data;
  return HTTP.binary(
    new CloudEvent({
      source: 'customer.processor',
      type: 'customer.processed'
    })
  );
};

export function handle(context: Context, cloudevent?: CloudEvent): Record<string, any> {
  // process customer and return custom headers
  const customer = cloudevent.data as Record<string, any>;
  return { headers: { 'customer-id': customer.id } };
}

export function handle(context: Context, cloudevent?: CloudEvent): Record<string, any> {
  // process customer
  const customer = cloudevent.data as Record<string, any>;
  if (customer.restricted) {
    return {
      statusCode: 451
    }
  }
  // business logic, then
  return {
    statusCode: 240
  }
}

export function handle(context: Context, cloudevent?: CloudEvent): Record<string, string> {
  // process customer
  const customer = cloudevent.data as Record<string, any>;
  if (customer.restricted) {
    const err = new Error(‘Unavailable for legal reasons’);
    err.statusCode = 451;
    throw err;
  }
}

TypeScript functions can be tested locally on your computer. In the default project that is created when you create a function using kn func create, there is a test folder that contains some simple unit and integration tests.

When you create a Go function using the Knative (kn) CLI, the project directory looks like a typical Go project. The only exception is the additional func.yaml configuration file, which is used for specifying the image.

Go functions have few restrictions. The only requirements are that your project must be defined in a function module, and must export the function Handle().

Both http and event trigger functions have the same template structure:

fn
├── README.md
├── func.yaml 1
├── go.mod 2
├── go.sum
├── handle.go
└── handle_test.go

When using the Knative (kn) CLI to create a function project, you can generate a project that responds to CloudEvents, or one that responds to simple HTTP requests. Go functions are invoked by using different methods, depending on whether they are triggered by an HTTP request or a CloudEvent.

func Handle(ctx context.Context, res http.ResponseWriter, req *http.Request) {
  // Read body
  body, err := ioutil.ReadAll(req.Body)
  defer req.Body.Close()
  if err != nil {
	http.Error(res, err.Error(), 500)
	return
  }
  // Process body and function logic
  // ...
}

Handle()
Handle() error
Handle(context.Context)
Handle(context.Context) error
Handle(cloudevents.Event)
Handle(cloudevents.Event) error
Handle(context.Context, cloudevents.Event)
Handle(context.Context, cloudevents.Event) error
Handle(cloudevents.Event) *cloudevents.Event
Handle(cloudevents.Event) (*cloudevents.Event, error)
Handle(context.Context, cloudevents.Event) *cloudevents.Event
Handle(context.Context, cloudevents.Event) (*cloudevents.Event, error)

{
  "customerId": "0123456",
  "productId": "6543210"
}

type Purchase struct {
  CustomerId string `json:"customerId"`
  ProductId  string `json:"productId"`
}
func Handle(ctx context.Context, event cloudevents.Event) (err error) {

  purchase := &Purchase{}
  if err = event.DataAs(purchase); err != nil {
	fmt.Fprintf(os.Stderr, "failed to parse incoming CloudEvent %s\n", err)
	return
  }
  // ...
}

func Handle(ctx context.Context, event cloudevents.Event) {
  bytes, err := json.Marshal(event)
  // ...
}

Functions triggered by HTTP requests can set the response directly. You can configure the function to do this by using the Go http.ResponseWriter.

func Handle(ctx context.Context, res http.ResponseWriter, req *http.Request) {
  // Set response
  res.Header().Add("Content-Type", "text/plain")
  res.Header().Add("Content-Length", "3")
  res.WriteHeader(200)
  _, err := fmt.Fprintf(res, "OK\n")
  if err != nil {
	fmt.Fprintf(os.Stderr, "error or response write: %v", err)
  }
}

Functions triggered by a cloud event might return nothing, error, or CloudEvent in order to push events into the Knative Eventing system. In this case, you must set a unique ID, proper Source, and a Type for the cloud event. The data can be populated from a defined structure, or from a map.

func Handle(ctx context.Context, event cloudevents.Event) (resp *cloudevents.Event, err error) {
  // ...
  response := cloudevents.NewEvent()
  response.SetID("example-uuid-32943bac6fea")
  response.SetSource("purchase/getter")
  response.SetType("purchase")
  // Set the data from Purchase type
  response.SetData(cloudevents.ApplicationJSON, Purchase{
	CustomerId: custId,
	ProductId:  prodId,
  })
  // OR set the data directly from map
  response.SetData(cloudevents.ApplicationJSON, map[string]string{"customerId": custId, "productId": prodId})
  // Validate the response
  resp = &response
  if err = resp.Validate(); err != nil {
	fmt.Printf("invalid event created. %v", err)
  }
  return
}

Go functions can be tested locally on your computer. In the default project that is created when you create a function using kn func create, there is a handle_test.go file, which contains some basic tests. These tests can be extended as needed.

When you create a Python function by using the Knative (kn) CLI, the project directory looks similar to a typical Python project. Python functions have very few restrictions. The only requirements are that your project contains a func.py file that contains a main() function, and a func.yaml configuration file.

Developers are not restricted to the dependencies provided in the template requirements.txt file. Additional dependencies can be added as they would be in any other Python project. When the project is built for deployment, these dependencies will be included in the created runtime container image.

Both http and event trigger functions have the same template structure:

fn
├── func.py 1
├── func.yaml 2
├── requirements.txt 3
└── test_func.py 4

Python functions can be invoked with a simple HTTP request. When an incoming request is received, functions are invoked with a context object as the first parameter.

The context object is a Python class with two attributes:

Developers can access any CloudEvent data from the context object.

def main(context: Context):
    """
    The context parameter contains the Flask request object and any
    CloudEvent received with the request.
    """
    print(f"Method: {context.request.method}")
    print(f"Event data {context.cloud_event.data}")
    # ... business logic here

Functions can return any value supported by Flask. This is because the invocation framework proxies these values directly to the Flask server.

def main(context: Context):
    body = { "message": "Howdy!" }
    headers = { "content-type": "application/json" }
    return body, 200, headers

Functions can set both headers and response codes as secondary and tertiary response values from function invocation.

@event("event_source"="/my/function", "event_type"="my.type")
def main(context):
    # business logic here
    data = do_something()
    # more data processing
    return data

You can test Python functions locally on your computer. The default project contains a test_func.py file, which provides a simple unit test for functions.

When you create a Quarkus function by using the Knative (kn) CLI, the project directory looks similar to a typical Maven project. Additionally, the project contains the func.yaml file, which is used for configuring the function.

Both http and event trigger functions have the same template structure:

.
├── func.yaml 1
├── mvnw
├── mvnw.cmd
├── pom.xml 2
├── README.md
└── src
    ├── main
    │   ├── java
    │   │   └── functions
    │   │       ├── Function.java 3
    │   │       ├── Input.java
    │   │       └── Output.java
    │   └── resources
    │       └── application.properties
    └── test
        └── java
            └── functions 4
                ├── FunctionTest.java
                └── NativeFunctionIT.java

You can create a Quarkus project that responds to cloud events, or one that responds to simple HTTP requests. Cloud events in Knative are transported over HTTP as a POST request, so either function type can listen and respond to incoming HTTP requests.

When an incoming request is received, Quarkus functions are invoked with an instance of a permitted type.

The following example shows a function that receives and processes the customerId and productId purchase data that is listed in the previous table:

public class Functions {
    @Funq
    public void processPurchase(Purchase purchase) {
        // process the purchase
    }
}

The corresponding Purchase JavaBean class that contains the purchase data looks as follows:

public class Purchase {
    private long customerId;
    private long productId;
    // getters and setters
}

import io.quarkus.funqy.Funq;
import io.quarkus.funqy.knative.events.CloudEvent;

public class Input {
    private String message;

    // getters and setters
}

public class Output {
    private String message;

    // getters and setters
}

public class Functions {
    @Funq
    public Output withBeans(Input in) {
        // function body
    }

    @Funq
    public CloudEvent<Output> withCloudEvent(CloudEvent<Input> in) {
        // function body
    }

    @Funq
    public void withBinary(byte[] in) {
        // function body
    }
}

If you need to read or write the attributes of a CloudEvent, such as type or subject, you can use the CloudEvent<T> generic interface and the CloudEventBuilder builder. The <T> type parameter must be one of the permitted types.

In the following example, CloudEventBuilder is used to return success or failure of processing the purchase:

public class Functions {

    private boolean _processPurchase(Purchase purchase) {
        // do stuff
    }

    public CloudEvent<Void> processPurchase(CloudEvent<Purchase> purchaseEvent) {
        System.out.println("subject is: " + purchaseEvent.subject());

        if (!_processPurchase(purchaseEvent.data())) {
            return CloudEventBuilder.create()
                    .type("purchase.error")
                    .build();
        }
        return CloudEventBuilder.create()
                .type("purchase.success")
                .build();
    }
}

Functions can return an instance of any type from the list of permitted types. Alternatively, they can return the Uni<T> type, where the <T> type parameter can be of any type from the permitted types.

The Uni<T> type is useful if a function calls asynchronous APIs, because the returned object is serialized in the same format as the received object. For example:

The following example shows a function that fetches a list of purchases:

public class Functions {
    @Funq
    public List<Purchase> getPurchasesByName(String name) {
      // logic to retrieve purchases
    }
}

public class Functions {
    public List<Integer> getIds();
    public Purchase[] getPurchasesByName(String name);
    public String getNameById(int id);
    public Map<String,Integer> getNameIdMapping();
    public void processImage(byte[] img);
}

Quarkus functions can be tested locally on your computer. In the default project that is created when you create a function using kn func create, there is the src/test/ directory, which contains basic Maven tests. These tests can be extended as needed.

Many of the fields in func.yaml are generated automatically when you create, build, and deploy your function. However, there are also fields that you modify manually to change things, such as the function name or the image name.

buildEnvs:
- name: EXAMPLE1
  value: one

buildEnvs:
- name: EXAMPLE1
  value: '{{ env:LOCAL_ENV_VAR }}'

name: test
namespace: ""
runtime: go
...
envs:
- name: EXAMPLE1 1
  value: value
- name: EXAMPLE2 2
  value: '{{ env:LOCAL_ENV_VALUE }}'
- name: EXAMPLE3 3
  value: '{{ secret:mysecret:key }}'
- name: EXAMPLE4 4
  value: '{{ configMap:myconfigmap:key }}'
- value: '{{ secret:mysecret2 }}' 5
- value: '{{ configMap:myconfigmap2 }}' 6

name: test
namespace: ""
runtime: go
...
volumes:
- secret: mysecret 1
  path: /workspace/secret
- configMap: myconfigmap 2
  path: /workspace/configmap

name: test
namespace: ""
runtime: go
...
options:
  scale:
    min: 0
    max: 10
    metric: concurrency
    target: 75
    utilization: 75
  resources:
    requests:
      cpu: 100m
      memory: 128Mi
    limits:
      cpu: 1000m
      memory: 256Mi
      concurrency: 100

labels:
- key: role
  value: backend

labels:
- key: author
  value: '{{ env:USER }}'

If you want to avoid storing sensitive information such as an API key in the function configuration, you can add a reference to an environment variable available in the local environment. You can do this by modifying the envs field in the func.yaml file.

You can manage the secrets and config maps accessed by your function by using the kn func config interactive utility. The available operations include listing, adding, and removing values stored in config maps and secrets as environment variables, as well as listing, adding, and removing volumes. This functionality enables you to manage what data stored on the cluster is accessible by your function.

Every time you run the kn func config utility, you need to navigate the entire dialogue to select the operation you need, as shown in the previous section. To save steps, you can directly execute a specific operation by running a more specific form of the kn func config command:

You can manually add configuration for accessing secrets and config maps to your function. This might be preferable to using the kn func config interactive utility and commands, for example when you have an existing configuration snippet.

You can add annotations to a function. Similar to a label, an annotation is defined as a key-value map. Annotations are useful, for example, for providing metadata about a function, such as the function’s author.

The next time you deploy your function to the cluster, the annotations are added to the corresponding Knative service.

The context object has several properties that can be accessed by the function developer. Accessing these properties can provide information about HTTP requests and write output to the cluster logs.

function handle(context) {
  context.log.info(“Processing customer”);
}

$ kn func invoke --target 'http://example.function.com'

{"level":30,"time":1604511655265,"pid":3430203,"hostname":"localhost.localdomain","reqId":1,"msg":"Processing customer"}

function handle(context) {
  // Log the 'name' query parameter
  context.log.info(context.query.name);
  // Query parameters are also attached to the context
  context.log.info(context.name);
}

$ kn func invoke --target 'http://example.com?name=tiger'

{"level":30,"time":1604511655265,"pid":3430203,"hostname":"localhost.localdomain","reqId":1,"msg":"tiger"}

function handle(context) {
  // log the incoming request body's 'hello' parameter
  context.log.info(context.body.hello);
}

$ kn func invoke -d '{"Hello": "world"}'

{"level":30,"time":1604511655265,"pid":3430203,"hostname":"localhost.localdomain","reqId":1,"msg":"world"}

function handle(context) {
  context.log.info(context.headers["custom-header"]);
}

$ kn func invoke --target 'http://example.function.com'

{"level":30,"time":1604511655265,"pid":3430203,"hostname":"localhost.localdomain","reqId":1,"msg":"some-value"}

The context object has several properties that can be accessed by the function developer. Accessing these properties can provide information about incoming HTTP requests and write output to the cluster logs.

export function handle(context: Context): string {
    // log the incoming request body's 'hello' parameter
    if (context.body) {
      context.log.info((context.body as Record<string, string>).hello);
    } else {
      context.log.info('No data received');
    }
    return 'OK';
}

$ kn func invoke --target 'http://example.function.com'

{"level":30,"time":1604511655265,"pid":3430203,"hostname":"localhost.localdomain","reqId":1,"msg":"Processing customer"}

export function handle(context: Context): string {
      // log the 'name' query parameter
    if (context.query) {
      context.log.info((context.query as Record<string, string>).name);
    } else {
      context.log.info('No data received');
    }
    return 'OK';
}

$ kn func invoke --target 'http://example.function.com' --data '{"name": "tiger"}'

{"level":30,"time":1604511655265,"pid":3430203,"hostname":"localhost.localdomain","reqId":1,"msg":"tiger"}
{"level":30,"time":1604511655265,"pid":3430203,"hostname":"localhost.localdomain","reqId":1,"msg":"tiger"}

export function handle(context: Context): string {
    // log the incoming request body's 'hello' parameter
    if (context.body) {
      context.log.info((context.body as Record<string, string>).hello);
    } else {
      context.log.info('No data received');
    }
    return 'OK';
}

$ kn func invoke --target 'http://example.function.com' --data '{"hello": "world"}'

{"level":30,"time":1604511655265,"pid":3430203,"hostname":"localhost.localdomain","reqId":1,"msg":"world"}

export function handle(context: Context): string {
    // log the incoming request body's 'hello' parameter
    if (context.body) {
      context.log.info((context.headers as Record<string, string>)['custom-header']);
    } else {
      context.log.info('No data received');
    }
    return 'OK';
}

$ curl -H'x-custom-header: some-value’' http://example.function.com

{"level":30,"time":1604511655265,"pid":3430203,"hostname":"localhost.localdomain","reqId":1,"msg":"some-value"}