このコンテンツは選択した言語では利用できません。
18.9. Displaying Volume Status
You can display the status information about a specific volume, brick, or all volumes, as needed. Status information can be used to understand the current status of the brick, NFS processes, self-heal daemon and overall file system. Status information can also be used to monitor and debug the volume information. You can view status of the volume along with the details:
- detail - Displays additional information about the bricks.
- clients - Displays the list of clients connected to the volume.
- mem - Displays the memory usage and memory pool details of the bricks.
- inode - Displays the inode tables of the volume.
- fd - Displays the open file descriptor tables of the volume.
- callpool - Displays the pending calls of the volume.
Setting Timeout Period
When you try to obtain information of a specific volume, the command may get timed out from the CLI if the originator glusterd takes longer than 120 seconds, the default time out, to aggregate the results from all the other glusterds and report back to CLI.
You can use the
--timeout option to ensure that the commands do not get timed out by 120 seconds.
For example,
# gluster volume status --timeout=500 VOLNAME inode
It is recommended to use
--timeout option when obtaining information about the inodes or clients or details as they frequently get timed out.
Display information about a specific volume using the following command:
# gluster volume status --timeout=value_in_seconds [all|VOLNAME [nfs | shd | BRICKNAME]] [detail |clients | mem | inode | fd |callpool]
For example, to display information about test-volume:
# gluster volume status test-volume Status of volume: test-volume Gluster process Port Online Pid ------------------------------------------------------------ Brick Server1:/rhgs/brick0/rep1 24010 Y 18474 Brick Server1:/rhgs/brick0/rep2 24011 Y 18479 NFS Server on localhost 38467 Y 18486 Self-heal Daemon on localhost N/A Y 18491
The self-heal daemon status will be displayed only for replicated volumes.
Display information about all volumes using the command:
# gluster volume status all
# gluster volume status all Status of volume: test Gluster process Port Online Pid ----------------------------------------------------------- Brick Server1:/rhgs/brick0/test 24009 Y 29197 NFS Server on localhost 38467 Y 18486 Status of volume: test-volume Gluster process Port Online Pid ------------------------------------------------------------ Brick Server1:/rhgs/brick0/rep1 24010 Y 18474 Brick Server1:/rhgs/brick0/rep2 24011 Y 18479 NFS Server on localhost 38467 Y 18486 Self-heal Daemon on localhost N/A Y 18491
Display additional information about the bricks using the command:
# gluster volume status VOLNAME detail
For example, to display additional information about the bricks of test-volume:
# gluster volume status test-volume detail Status of volume: test-vol ------------------------------------------------------------------------------ Brick : Brick Server1:/rhgs/test Port : 24012 Online : Y Pid : 18649 File System : xfs Device : /dev/sda1 Mount Options : rw,relatime,user_xattr,acl,commit=600,barrier=1,data=ordered Inode Size : 256 Disk Space Free : 22.1GB Total Disk Space : 46.5GB Inode Count : 3055616 Free Inodes : 2577164
Detailed information is not available for NFS and the self-heal daemon.
Display the list of clients accessing the volumes using the command:
# gluster volume status VOLNAME clients
For example, to display the list of clients connected to test-volume:
# gluster volume status test-volume clients Brick : Server1:/rhgs/brick0/1 Clients connected : 2 Hostname Bytes Read BytesWritten -------- --------- ------------ 127.0.0.1:1013 776 676 127.0.0.1:1012 50440 51200
Client information is not available for the self-heal daemon.
Display the memory usage and memory pool details of the bricks on a volume using the command:
# gluster volume status VOLNAME mem
For example, to display the memory usage and memory pool details for the bricks on test-volume:
# gluster volume status test-volume mem Memory status for volume : test-volume ---------------------------------------------- Brick : Server1:/rhgs/brick0/1 Mallinfo -------- Arena : 434176 Ordblks : 2 Smblks : 0 Hblks : 12 Hblkhd : 40861696 Usmblks : 0 Fsmblks : 0 Uordblks : 332416 Fordblks : 101760 Keepcost : 100400 Mempool Stats ------------- Name HotCount ColdCount PaddedSizeof AllocCount MaxAlloc ---- -------- --------- ------------ ---------- -------- test-volume-server:fd_t 0 16384 92 57 5 test-volume-server:dentry_t 59 965 84 59 59 test-volume-server:inode_t 60 964 148 60 60 test-volume-server:rpcsvc_request_t 0 525 6372 351 2 glusterfs:struct saved_frame 0 4096 124 2 2 glusterfs:struct rpc_req 0 4096 2236 2 2 glusterfs:rpcsvc_request_t 1 524 6372 2 1 glusterfs:call_stub_t 0 1024 1220 288 1 glusterfs:call_stack_t 0 8192 2084 290 2 glusterfs:call_frame_t 0 16384 172 1728 6
Display the inode tables of the volume using the command:
# gluster volume status VOLNAME inode
For example, to display the inode tables of test-volume:
# gluster volume status test-volume inode inode tables for volume test-volume ---------------------------------------------- Brick : Server1:/rhgs/brick0/1 Active inodes: GFID Lookups Ref IA type ---- ------- --- ------- 6f3fe173-e07a-4209-abb6-484091d75499 1 9 2 370d35d7-657e-44dc-bac4-d6dd800ec3d3 1 1 2 LRU inodes: GFID Lookups Ref IA type ---- ------- --- ------- 80f98abe-cdcf-4c1d-b917-ae564cf55763 1 0 1 3a58973d-d549-4ea6-9977-9aa218f233de 1 0 1 2ce0197d-87a9-451b-9094-9baa38121155 1 0 2
Display the open file descriptor tables of the volume using the command:
# gluster volume status VOLNAME fd
For example, to display the open file descriptor tables of test-volume:
# gluster volume status test-volume fd FD tables for volume test-volume ---------------------------------------------- Brick : Server1:/rhgs/brick0/1 Connection 1: RefCount = 0 MaxFDs = 128 FirstFree = 4 FD Entry PID RefCount Flags -------- --- -------- ----- 0 26311 1 2 1 26310 3 2 2 26310 1 2 3 26311 3 2 Connection 2: RefCount = 0 MaxFDs = 128 FirstFree = 0 No open fds Connection 3: RefCount = 0 MaxFDs = 128 FirstFree = 0 No open fds
FD information is not available for NFS and the self-heal daemon.
Display the pending calls of the volume using the command:
# gluster volume status VOLNAME callpool
Note, each call has a call stack containing call frames.
For example, to display the pending calls of test-volume:
# gluster volume status test-volume callpool Pending calls for volume test-volume ---------------------------------------------- Brick : Server1:/rhgs/brick0/1 Pending calls: 2 Call Stack1 UID : 0 GID : 0 PID : 26338 Unique : 192138 Frames : 7 Frame 1 Ref Count = 1 Translator = test-volume-server Completed = No Frame 2 Ref Count = 0 Translator = test-volume-posix Completed = No Parent = test-volume-access-control Wind From = default_fsync Wind To = FIRST_CHILD(this)->fops->fsync Frame 3 Ref Count = 1 Translator = test-volume-access-control Completed = No Parent = repl-locks Wind From = default_fsync Wind To = FIRST_CHILD(this)->fops->fsync Frame 4 Ref Count = 1 Translator = test-volume-locks Completed = No Parent = test-volume-io-threads Wind From = iot_fsync_wrapper Wind To = FIRST_CHILD (this)->fops->fsync Frame 5 Ref Count = 1 Translator = test-volume-io-threads Completed = No Parent = test-volume-marker Wind From = default_fsync Wind To = FIRST_CHILD(this)->fops->fsync Frame 6 Ref Count = 1 Translator = test-volume-marker Completed = No Parent = /export/1 Wind From = io_stats_fsync Wind To = FIRST_CHILD(this)->fops->fsync Frame 7 Ref Count = 1 Translator = /export/1 Completed = No Parent = test-volume-server Wind From = server_fsync_resume Wind To = bound_xl->fops->fsync
