Questo contenuto non è disponibile nella lingua selezionata.

Chapter 7. Operator SDK


7.1. Installing the Operator SDK CLI

The Operator SDK provides a command-line interface (CLI) tool that Operator developers can use to build, test, and deploy an Operator. You can install the Operator SDK CLI on your workstation so that you are prepared to start authoring your own Operators.

Operator authors with cluster administrator access to a Kubernetes-based cluster, such as OpenShift Container Platform, can use the Operator SDK CLI to develop their own Operators based on Go, Ansible, or Helm. Kubebuilder is embedded into the Operator SDK as the scaffolding solution for Go-based Operators, which means existing Kubebuilder projects can be used as is with the Operator SDK and continue to work.

See Developing Operators for full documentation on the Operator SDK.

Note

OpenShift Container Platform 4.10 supports Operator SDK v1.16.0.

7.1.1. Installing the Operator SDK CLI

You can install the OpenShift SDK CLI tool on Linux.

Prerequisites

  • Go v1.16+
  • docker v17.03+, podman v1.9.3+, or buildah v1.7+

Procedure

  1. Navigate to the OpenShift mirror site.
  2. From the latest 4.10 directory, download the latest version of the tarball for Linux.
  3. Unpack the archive:

    $ tar xvf operator-sdk-v1.16.0-ocp-linux-x86_64.tar.gz
  4. Make the file executable:

    $ chmod +x operator-sdk
  5. Move the extracted operator-sdk binary to a directory that is on your PATH.

    Tip

    To check your PATH:

    $ echo $PATH
    $ sudo mv ./operator-sdk /usr/local/bin/operator-sdk

Verification

  • After you install the Operator SDK CLI, verify that it is available:

    $ operator-sdk version

    Example output

    operator-sdk version: "v1.16.0-ocp", ...

7.2. Operator SDK CLI reference

The Operator SDK command-line interface (CLI) is a development kit designed to make writing Operators easier.

Operator SDK CLI syntax

$ operator-sdk <command> [<subcommand>] [<argument>] [<flags>]

See Developing Operators for full documentation on the Operator SDK.

7.2.1. bundle

The operator-sdk bundle command manages Operator bundle metadata.

7.2.1.1. validate

The bundle validate subcommand validates an Operator bundle.

Table 7.1. bundle validate flags
FlagDescription

-h, --help

Help output for the bundle validate subcommand.

--index-builder (string)

Tool to pull and unpack bundle images. Only used when validating a bundle image. Available options are docker, which is the default, podman, or none.

--list-optional

List all optional validators available. When set, no validators are run.

--select-optional (string)

Label selector to select optional validators to run. When run with the --list-optional flag, lists available optional validators.

7.2.2. cleanup

The operator-sdk cleanup command destroys and removes resources that were created for an Operator that was deployed with the run command.

Table 7.2. cleanup flags
FlagDescription

-h, --help

Help output for the run bundle subcommand.

--kubeconfig (string)

Path to the kubeconfig file to use for CLI requests.

-n, --namespace (string)

If present, namespace in which to run the CLI request.

--timeout <duration>

Time to wait for the command to complete before failing. The default value is 2m0s.

7.2.3. completion

The operator-sdk completion command generates shell completions to make issuing CLI commands quicker and easier.

Table 7.3. completion subcommands
SubcommandDescription

bash

Generate bash completions.

zsh

Generate zsh completions.

Table 7.4. completion flags
FlagDescription

-h, --help

Usage help output.

For example:

$ operator-sdk completion bash

Example output

# bash completion for operator-sdk                         -*- shell-script -*-
...
# ex: ts=4 sw=4 et filetype=sh

7.2.4. create

The operator-sdk create command is used to create, or scaffold, a Kubernetes API.

7.2.4.1. api

The create api subcommand scaffolds a Kubernetes API. The subcommand must be run in a project that was initialized with the init command.

Table 7.5. create api flags
FlagDescription

-h, --help

Help output for the run bundle subcommand.

7.2.5. generate

The operator-sdk generate command invokes a specific generator to generate code or manifests.

7.2.5.1. bundle

The generate bundle subcommand generates a set of bundle manifests, metadata, and a bundle.Dockerfile file for your Operator project.

Note

Typically, you run the generate kustomize manifests subcommand first to generate the input Kustomize bases that are used by the generate bundle subcommand. However, you can use the make bundle command in an initialized project to automate running these commands in sequence.

Table 7.6. generate bundle flags
FlagDescription

--channels (string)

Comma-separated list of channels to which the bundle belongs. The default value is alpha.

--crds-dir (string)

Root directory for CustomResoureDefinition manifests.

--default-channel (string)

The default channel for the bundle.

--deploy-dir (string)

Root directory for Operator manifests, such as deployments and RBAC. This directory is different from the directory passed to the --input-dir flag.

-h, --help

Help for generate bundle

--input-dir (string)

Directory from which to read an existing bundle. This directory is the parent of your bundle manifests directory and is different from the --deploy-dir directory.

--kustomize-dir (string)

Directory containing Kustomize bases and a kustomization.yaml file for bundle manifests. The default path is config/manifests.

--manifests

Generate bundle manifests.

--metadata

Generate bundle metadata and Dockerfile.

--output-dir (string)

Directory to write the bundle to.

--overwrite

Overwrite the bundle metadata and Dockerfile if they exist. The default value is true.

--package (string)

Package name for the bundle.

-q, --quiet

Run in quiet mode.

--stdout

Write bundle manifest to standard out.

--version (string)

Semantic version of the Operator in the generated bundle. Set only when creating a new bundle or upgrading the Operator.

Additional resources

7.2.5.2. kustomize

The generate kustomize subcommand contains subcommands that generate Kustomize data for the Operator.

7.2.5.2.1. manifests

The generate kustomize manifests subcommand generates or regenerates Kustomize bases and a kustomization.yaml file in the config/manifests directory, which are used to build bundle manifests by other Operator SDK commands. This command interactively asks for UI metadata, an important component of manifest bases, by default unless a base already exists or you set the --interactive=false flag.

Table 7.7. generate kustomize manifests flags
FlagDescription

--apis-dir (string)

Root directory for API type definitions.

-h, --help

Help for generate kustomize manifests.

--input-dir (string)

Directory containing existing Kustomize files.

--interactive

When set to false, if no Kustomize base exists, an interactive command prompt is presented to accept custom metadata.

--output-dir (string)

Directory where to write Kustomize files.

--package (string)

Package name.

-q, --quiet

Run in quiet mode.

7.2.6. init

The operator-sdk init command initializes an Operator project and generates, or scaffolds, a default project directory layout for the given plugin.

This command writes the following files:

  • Boilerplate license file
  • PROJECT file with the domain and repository
  • Makefile to build the project
  • go.mod file with project dependencies
  • kustomization.yaml file for customizing manifests
  • Patch file for customizing images for manager manifests
  • Patch file for enabling Prometheus metrics
  • main.go file to run
Table 7.8. init flags
FlagDescription

--help, -h

Help output for the init command.

--plugins (string)

Name and optionally version of the plugin to initialize the project with. Available plugins are ansible.sdk.operatorframework.io/v1, go.kubebuilder.io/v2, go.kubebuilder.io/v3, and helm.sdk.operatorframework.io/v1.

--project-version

Project version. Available values are 2 and 3-alpha, which is the default.

7.2.7. run

The operator-sdk run command provides options that can launch the Operator in various environments.

7.2.7.1. bundle

The run bundle subcommand deploys an Operator in the bundle format with Operator Lifecycle Manager (OLM).

Table 7.9. run bundle flags
FlagDescription

--index-image (string)

Index image in which to inject a bundle. The default image is quay.io/operator-framework/upstream-opm-builder:latest.

--install-mode <install_mode_value>

Install mode supported by the cluster service version (CSV) of the Operator, for example AllNamespaces or SingleNamespace.

--timeout <duration>

Install timeout. The default value is 2m0s.

--kubeconfig (string)

Path to the kubeconfig file to use for CLI requests.

-n, --namespace (string)

If present, namespace in which to run the CLI request.

-h, --help

Help output for the run bundle subcommand.

Additional resources

7.2.7.2. bundle-upgrade

The run bundle-upgrade subcommand upgrades an Operator that was previously installed in the bundle format with Operator Lifecycle Manager (OLM).

Table 7.10. run bundle-upgrade flags
FlagDescription

--timeout <duration>

Upgrade timeout. The default value is 2m0s.

--kubeconfig (string)

Path to the kubeconfig file to use for CLI requests.

-n, --namespace (string)

If present, namespace in which to run the CLI request.

-h, --help

Help output for the run bundle subcommand.

7.2.8. scorecard

The operator-sdk scorecard command runs the scorecard tool to validate an Operator bundle and provide suggestions for improvements. The command takes one argument, either a bundle image or directory containing manifests and metadata. If the argument holds an image tag, the image must be present remotely.

Table 7.11. scorecard flags
FlagDescription

-c, --config (string)

Path to scorecard configuration file. The default path is bundle/tests/scorecard/config.yaml.

-h, --help

Help output for the scorecard command.

--kubeconfig (string)

Path to kubeconfig file.

-L, --list

List which tests are available to run.

-n, --namespace (string)

Namespace in which to run the test images.

-o, --output (string)

Output format for results. Available values are text, which is the default, and json.

-l, --selector (string)

Label selector to determine which tests are run.

-s, --service-account (string)

Service account to use for tests. The default value is default.

-x, --skip-cleanup

Disable resource cleanup after tests are run.

-w, --wait-time <duration>

Seconds to wait for tests to complete, for example 35s. The default value is 30s.

Additional resources

Red Hat logoGithubRedditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita ilBlog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

© 2024 Red Hat, Inc.