You are viewing documentation for a release that is no longer maintainedSee documentation for the latest supported version 3 or the latest supported version 4.18.3.6.5. 静态路由 以下片段在接口 eth1 中配置静态路由和静态 IP。 ... interfaces: - name: eth1 description: Static routing on eth1 type: ethernet state: up ipv4: address: - ip: 192.0.2.251 prefix-length: 24 enabled: true routes: config: - destination: 198.51.100.0/24 metric: 150 next-hop-address: 192.0.2.1 next-hop-interface: eth1 table-id: 254 ... ... interfaces: - name: eth1 description: Static routing on eth1 type: ethernet state: up ipv4: address: - ip: 192.0.2.251 1 prefix-length: 24 enabled: true routes: config: - destination: 198.51.100.0/24 metric: 150 next-hop-address: 192.0.2.1 2 next-hop-interface: eth1 table-id: 254 ... Copy to Clipboard Copied! Toggle word wrap Toggle overflow 1 以太网接口的静态 IP 地址。 2 节点流量的下一跳地址。这必须与为以太接口设定的 IP 地址位于同一个子网中。 下一个