Chapter 13. VolumeSnapshotContent [snapshot.storage.k8s.io/v1]

deletionPolicy

string

deletionPolicy determines whether this VolumeSnapshotContent and its physical snapshot on the underlying storage system should be deleted when its bound VolumeSnapshot is deleted. Supported values are "Retain" and "Delete". "Retain" means that the VolumeSnapshotContent and its physical snapshot on underlying storage system are kept. "Delete" means that the VolumeSnapshotContent and its physical snapshot on underlying storage system are deleted. For dynamically provisioned snapshots, this field will automatically be filled in by the CSI snapshotter sidecar with the "DeletionPolicy" field defined in the corresponding VolumeSnapshotClass. For pre-existing snapshots, users MUST specify this field when creating the VolumeSnapshotContent object. Required.

driver

string

driver is the name of the CSI driver used to create the physical snapshot on the underlying storage system. This MUST be the same as the name returned by the CSI GetPluginName() call for that driver. Required.

source

object

source specifies whether the snapshot is (or should be) dynamically provisioned or already exists, and just requires a Kubernetes object representation. This field is immutable after creation. Required.

sourceVolumeMode

string

SourceVolumeMode is the mode of the volume whose snapshot is taken. Can be either “Filesystem” or “Block”. If not specified, it indicates the source volume’s mode is unknown. This field is immutable. This field is an alpha field.

volumeSnapshotClassName

string

name of the VolumeSnapshotClass from which this snapshot was (or will be) created. Note that after provisioning, the VolumeSnapshotClass may be deleted or recreated with different set of values, and as such, should not be referenced post-snapshot creation.

volumeSnapshotRef

object

volumeSnapshotRef specifies the VolumeSnapshot object to which this VolumeSnapshotContent object is bound. VolumeSnapshot.Spec.VolumeSnapshotContentName field must reference to this VolumeSnapshotContent’s name for the bidirectional binding to be valid. For a pre-existing VolumeSnapshotContent object, name and namespace of the VolumeSnapshot object MUST be provided for binding to happen. This field is immutable after creation. Required.

snapshotHandle

string

snapshotHandle specifies the CSI "snapshot_id" of a pre-existing snapshot on the underlying storage system for which a Kubernetes object representation was (or should be) created. This field is immutable.

volumeHandle

string

volumeHandle specifies the CSI "volume_id" of the volume from which a snapshot should be dynamically taken from. This field is immutable.

apiVersion

string

API version of the referent.

fieldPath

string

If referring to a piece of an object instead of an entire object, this string should contain a valid JSON/Go field access statement, such as desiredState.manifest.containers[2]. For example, if the object reference is to a container within a pod, this would take on a value like: "spec.containers{name}" (where "name" refers to the name of the container that triggered the event) or if no container name is specified "spec.containers[2]" (container with index 2 in this pod). This syntax is chosen only to have some well-defined way of referencing a part of an object. TODO: this design is not final and this field is subject to change in the future.

kind

string

Kind of the referent. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

name

string

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

namespace

string

Namespace of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/namespaces/

resourceVersion

string

Specific resourceVersion to which this reference is made, if any. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#concurrency-control-and-consistency

uid

string

UID of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#uids

creationTime

integer

creationTime is the timestamp when the point-in-time snapshot is taken by the underlying storage system. In dynamic snapshot creation case, this field will be filled in by the CSI snapshotter sidecar with the "creation_time" value returned from CSI "CreateSnapshot" gRPC call. For a pre-existing snapshot, this field will be filled with the "creation_time" value returned from the CSI "ListSnapshots" gRPC call if the driver supports it. If not specified, it indicates the creation time is unknown. The format of this field is a Unix nanoseconds time encoded as an int64. On Unix, the command date +%s%N returns the current time in nanoseconds since 1970-01-01 00:00:00 UTC.

error

object

error is the last observed error during snapshot creation, if any. Upon success after retry, this error field will be cleared.

readyToUse

boolean

readyToUse indicates if a snapshot is ready to be used to restore a volume. In dynamic snapshot creation case, this field will be filled in by the CSI snapshotter sidecar with the "ready_to_use" value returned from CSI "CreateSnapshot" gRPC call. For a pre-existing snapshot, this field will be filled with the "ready_to_use" value returned from the CSI "ListSnapshots" gRPC call if the driver supports it, otherwise, this field will be set to "True". If not specified, it means the readiness of a snapshot is unknown.

restoreSize

integer

restoreSize represents the complete size of the snapshot in bytes. In dynamic snapshot creation case, this field will be filled in by the CSI snapshotter sidecar with the "size_bytes" value returned from CSI "CreateSnapshot" gRPC call. For a pre-existing snapshot, this field will be filled with the "size_bytes" value returned from the CSI "ListSnapshots" gRPC call if the driver supports it. When restoring a volume from this snapshot, the size of the volume MUST NOT be smaller than the restoreSize if it is specified, otherwise the restoration will fail. If not specified, it indicates that the size is unknown.

snapshotHandle

string

snapshotHandle is the CSI "snapshot_id" of a snapshot on the underlying storage system. If not specified, it indicates that dynamic snapshot creation has either failed or it is still in progress.

message

string

message is a string detailing the encountered error during snapshot creation if specified. NOTE: message may be logged, and it should not contain sensitive information.

time

string

time is the timestamp when the error was encountered.

200 - OK

Status schema

401 - Unauthorized

Empty

200 - OK

VolumeSnapshotContentList schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

VolumeSnapshotContent schema

200 - OK

VolumeSnapshotContent schema

201 - Created

VolumeSnapshotContent schema

202 - Accepted

VolumeSnapshotContent schema

401 - Unauthorized

Empty

name

string

name of the VolumeSnapshotContent

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

200 - OK

Status schema

202 - Accepted

Status schema

401 - Unauthorized

Empty

200 - OK

VolumeSnapshotContent schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

200 - OK

VolumeSnapshotContent schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

VolumeSnapshotContent schema

200 - OK

VolumeSnapshotContent schema

201 - Created

VolumeSnapshotContent schema

401 - Unauthorized

Empty

name

string

name of the VolumeSnapshotContent

200 - OK

VolumeSnapshotContent schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

200 - OK

VolumeSnapshotContent schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

VolumeSnapshotContent schema

200 - OK

VolumeSnapshotContent schema

201 - Created

VolumeSnapshotContent schema

401 - Unauthorized

Empty