이 콘텐츠는 선택한 언어로 제공되지 않습니다.
2.5. Network Configuration
Figure 2.8. Network Configuration
If the system to be installed via kickstart does not have an Ethernet card, do not configure one on the Network Configuration page.
Networking is only required if you choose a networking-based installation method (NFS, FTP, or HTTP). Networking can always be configured after installation with the Network Administration Tool (
system-config-network). Refer to Chapter 17, Network Configuration for details.
For each Ethernet card on the system, click and select the network device and network type for the device. Select eth0 to configure the first Ethernet card, eth1 for the second Ethernet card, and so on.
