Chapter 8. Postinstallation network configuration

Procedure

1. Create the following

   NetworkPolicy

   objects:

   1. A policy named

      allow-from-openshift-ingress

      .

      $ cat << EOF| oc create -f -
      apiVersion: networking.k8s.io/v1
      kind: NetworkPolicy
      metadata:
        name: allow-from-openshift-ingress
      spec:
        ingress:
        - from:
          - namespaceSelector:
              matchLabels:
                policy-group.network.openshift.io/ingress: ""
        podSelector: {}
        policyTypes:
        - Ingress
      EOF

      Note

      policy-group.network.openshift.io/ingress: ""

      is the preferred namespace selector label for OpenShift SDN. You can use the

      network.openshift.io/policy-group: ingress

      namespace selector label, but this is a legacy label.

   2. A policy named

      allow-from-openshift-monitoring

      :

      $ cat << EOF| oc create -f -
      apiVersion: networking.k8s.io/v1
      kind: NetworkPolicy
      metadata:
        name: allow-from-openshift-monitoring
      spec:
        ingress:
        - from:
          - namespaceSelector:
              matchLabels:
                network.openshift.io/policy-group: monitoring
        podSelector: {}
        policyTypes:
        - Ingress
      EOF

   3. A policy named

      allow-same-namespace

      :

      $ cat << EOF| oc create -f -
      kind: NetworkPolicy
      apiVersion: networking.k8s.io/v1
      metadata:
        name: allow-same-namespace
      spec:
        podSelector:
        ingress:
        - from:
          - podSelector: {}
      EOF

   4. A policy named

      allow-from-kube-apiserver-operator

      :

      $ cat << EOF| oc create -f -
      apiVersion: networking.k8s.io/v1
      kind: NetworkPolicy
      metadata:
        name: allow-from-kube-apiserver-operator
      spec:
        ingress:
        - from:
          - namespaceSelector:
              matchLabels:
                kubernetes.io/metadata.name: openshift-kube-apiserver-operator
            podSelector:
              matchLabels:
                app: kube-apiserver-operator
        policyTypes:
        - Ingress
      EOF

      For more details, see New kube-apiserver-operator webhook controller validating health of webhook.

2. Optional: To confirm that the network policies exist in your current project, enter the following command:

   $ oc describe networkpolicy

   Example output

   Name:         allow-from-openshift-ingress
   Namespace:    example1
   Created on:   2020-06-09 00:28:17 -0400 EDT
   Labels:       <none>
   Annotations:  <none>
   Spec:
     PodSelector:     <none> (Allowing the specific traffic to all pods in this namespace)
     Allowing ingress traffic:
       To Port: <any> (traffic allowed to all ports)
       From:
         NamespaceSelector: network.openshift.io/policy-group: ingress
     Not affecting egress traffic
     Policy Types: Ingress
   
   
   Name:         allow-from-openshift-monitoring
   Namespace:    example1
   Created on:   2020-06-09 00:29:57 -0400 EDT
   Labels:       <none>
   Annotations:  <none>
   Spec:
     PodSelector:     <none> (Allowing the specific traffic to all pods in this namespace)
     Allowing ingress traffic:
       To Port: <any> (traffic allowed to all ports)
       From:
         NamespaceSelector: network.openshift.io/policy-group: monitoring
     Not affecting egress traffic
     Policy Types: Ingress

Procedure

1. Log in as a user with

   cluster-admin

   privileges.

2. Generate the default project template:

   $ oc adm create-bootstrap-project-template -o yaml > template.yaml

3. Use a text editor to modify the generated

   template.yaml

   file by adding objects or modifying existing objects.

4. The project template must be created in the

   openshift-config

   namespace. Load your modified template:

   $ oc create -f template.yaml -n openshift-config

5. Edit the project configuration resource using the web console or CLI.

   • Using the web console:

     1. Navigate to the Administration Cluster Settings page.
     2. Click Configuration to view all configuration resources.
     3. Find the entry for Project and click Edit YAML.

   • Using the CLI:

     1. Edit the

        project.config.openshift.io/cluster

        resource:

        $ oc edit project.config.openshift.io/cluster

6. Update the

   spec

   section to include the

   projectRequestTemplate

   and

   name

   parameters, and set the name of your uploaded project template. The default name is

   project-request

   .

   Project configuration resource with custom project template

   apiVersion: config.openshift.io/v1
   kind: Project
   metadata:
     ...
   spec:
     projectRequestTemplate:
       name: <template_name>

7. After you save your changes, create a new project to verify that your changes were successfully applied.

1. Show the port:

   $ openstack port show <cluster_name>-<cluster_ID>-ingress-port

2. Attach the port to the IP address:

   $ openstack floating ip set --port <ingress_port_ID> <apps_FIP>

3. Add a wildcard

   A

   record for

   *apps.

   to your DNS file:

   *.apps.<cluster_name>.<base_domain>  IN  A  <apps_FIP>

Procedure

1. From a command line, open the Cluster Network Operator (CNO) CR for editing:

   $ oc edit networks.operator.openshift.io cluster

2. Edit the settings to meet your requirements. The following file is provided as an example:

   apiVersion: operator.openshift.io/v1
   kind: Network
   metadata:
     name: cluster
   spec:
     clusterNetwork:
     - cidr: 10.128.0.0/14
       hostPrefix: 23
     serviceNetwork:
     - 172.30.0.0/16
     defaultNetwork:
       type: Kuryr
       kuryrConfig:
         enablePortPoolsPrepopulation: false 

   1

   
         poolMinPorts: 1 

   2

   
         poolBatchPorts: 3 

   3

   
         poolMaxPorts: 5 

   4

   1

   Set enablePortPoolsPrepopulation to true to make Kuryr create Neutron ports when the first pod that is configured to use the dedicated network for pods is created in a namespace. This setting raises the Neutron ports quota but can reduce the time that is required to spawn pods. The default value is false.

   2

   Kuryr creates new ports for a pool if the number of free ports in that pool is lower than the value of poolMinPorts. The default value is 1.

   3

   poolBatchPorts controls the number of new ports that are created if the number of free ports is lower than the value of poolMinPorts. The default value is 3.

   4

   If the number of free ports in a pool is higher than the value of poolMaxPorts, Kuryr deletes them until the number matches that value. Setting the value to 0 disables this upper bound, preventing pools from shrinking. The default value is 0.

3. Save your changes and quit the text editor to commit your changes.

Procedure

1. Create an

   SriovNetworkNodePolicy

   policy for the two

   hw-offload

   type VF interfaces that are on your cluster:

   The first virtual function interface

   apiVersion: sriovnetwork.openshift.io/v1
   kind: SriovNetworkNodePolicy 

   1

   
   metadata:
     name: "hwoffload9"
     namespace: openshift-sriov-network-operator
   spec:
     deviceType: netdevice
     isRdma: true
     nicSelector:
       pfNames: 

   2

   
       - ens6
     nodeSelector:
       feature.node.kubernetes.io/network-sriov.capable: 'true'
     numVfs: 1
     priority: 99
     resourceName: "hwoffload9"

   1

   Insert the SriovNetworkNodePolicy value here.

   2

   Both interfaces must include physical function (PF) names.

   The second virtual function interface

   apiVersion: sriovnetwork.openshift.io/v1
   kind: SriovNetworkNodePolicy 

   1

   
   metadata:
     name: "hwoffload10"
     namespace: openshift-sriov-network-operator
   spec:
     deviceType: netdevice
     isRdma: true
     nicSelector:
       pfNames: 

   2

   
       - ens5
     nodeSelector:
       feature.node.kubernetes.io/network-sriov.capable: 'true'
     numVfs: 1
     priority: 99
     resourceName: "hwoffload10"

   1

   Insert the SriovNetworkNodePolicy value here.

   2

   Both interfaces must include physical function (PF) names.

2. Create

   NetworkAttachmentDefinition

   resources for the two interfaces:

   A NetworkAttachmentDefinition resource for the first interface

   apiVersion: k8s.cni.cncf.io/v1
   kind: NetworkAttachmentDefinition
   metadata:
     annotations:
       k8s.v1.cni.cncf.io/resourceName: openshift.io/hwoffload9
     name: hwoffload9
     namespace: default
   spec:
       config: '{ "cniVersion":"0.3.1", "name":"hwoffload9","type":"host-device","device":"ens6"
       }'

   A NetworkAttachmentDefinition resource for the second interface

   apiVersion: k8s.cni.cncf.io/v1
   kind: NetworkAttachmentDefinition
   metadata:
     annotations:
       k8s.v1.cni.cncf.io/resourceName: openshift.io/hwoffload10
     name: hwoffload10
     namespace: default
   spec:
       config: '{ "cniVersion":"0.3.1", "name":"hwoffload10","type":"host-device","device":"ens5"
       }'

3. Use the interfaces that you created with a pod. For example:

   A pod that uses the two OVS offload interfaces

   apiVersion: v1
   kind: Pod
   metadata:
     name: dpdk-testpmd
     namespace: default
     annotations:
       irq-load-balancing.crio.io: disable
       cpu-quota.crio.io: disable
       k8s.v1.cni.cncf.io/resourceName: openshift.io/hwoffload9
       k8s.v1.cni.cncf.io/resourceName: openshift.io/hwoffload10
   spec:
     restartPolicy: Never
     containers:
     - name: dpdk-testpmd
       image: quay.io/krister/centos8_nfv-container-dpdk-testpmd:latest

Procedure

1. Create a file named

   network.yaml

   from the following template:

   spec:
     additionalNetworks:
     - name: hwoffload1
       namespace: cnf
       rawCNIConfig: '{ "cniVersion": "0.3.1", "name": "hwoffload1", "type": "host-device","pciBusId": "0000:00:05.0", "ipam": {}}' 

   1

   
       type: Raw

   where:

   pciBusId

   Specifies the device that is connected to the offloading network. If you do not have it, you can find this value by running the following command:

   $ oc describe SriovNetworkNodeState -n openshift-sriov-network-operator

2. From a command line, enter the following command to patch your cluster with the file:

   $ oc apply -f network.yaml