Questo contenuto non è disponibile nella lingua selezionata.

Chapter 18. Syncing LDAP groups

As an administrator, you can use groups to manage users, change their permissions, and enhance collaboration. Your organization may have already created user groups and stored them in an LDAP server. OpenShift Container Platform can sync those LDAP records with internal OpenShift Container Platform records, enabling you to manage your groups in one place. OpenShift Container Platform currently supports group sync with LDAP servers using three common schemas for defining group membership: RFC 2307, Active Directory, and augmented Active Directory.

For more information on configuring LDAP, see Configuring an LDAP identity provider.

Note

You must have cluster-admin privileges to sync groups.

18.1. About configuring LDAP sync

Before you can run LDAP sync, you need a sync configuration file. This file contains the following LDAP client configuration details:

Configuration for connecting to your LDAP server.
Sync configuration options that are dependent on the schema used in your LDAP server.
An administrator-defined list of name mappings that maps OpenShift Container Platform group names to groups in your LDAP server.

The format of the configuration file depends upon the schema you are using: RFC 2307, Active Directory, or augmented Active Directory.

LDAP client configuration: The LDAP client configuration section of the configuration defines the connections to your LDAP server.

The LDAP client configuration section of the configuration defines the connections to your LDAP server.

LDAP client configuration

url: ldap://10.0.0.0:389 1
bindDN: cn=admin,dc=example,dc=com 2
bindPassword: <password> 3
insecure: false 4
ca: my-ldap-ca-bundle.crt 5

1: The connection protocol, IP address of the LDAP server hosting your database, and the port to connect to, formatted as scheme://host:port.
2: Optional distinguished name (DN) to use as the Bind DN. OpenShift Container Platform uses this if elevated privilege is required to retrieve entries for the sync operation.
3: Optional password to use to bind. OpenShift Container Platform uses this if elevated privilege is necessary to retrieve entries for the sync operation. This value may also be provided in an environment variable, external file, or encrypted file.
4: When false, secure LDAP (ldaps://) URLs connect using TLS, and insecure LDAP (ldap://) URLs are upgraded to TLS. When true, no TLS connection is made to the server and you cannot use ldaps:// URL schemes.
5: The certificate bundle to use for validating server certificates for the configured URL. If empty, OpenShift Container Platform uses system-trusted roots. This only applies if insecure is set to false.

LDAP query definition: Sync configurations consist of LDAP query definitions for the entries that are required for synchronization. The specific definition of an LDAP query depends on the schema used to store membership information in the LDAP server.

LDAP query definition

baseDN: ou=users,dc=example,dc=com 1
scope: sub 2
derefAliases: never 3
timeout: 0 4
filter: (objectClass=person) 5
pageSize: 0 6

1: The distinguished name (DN) of the branch of the directory where all searches will start from. It is required that you specify the top of your directory tree, but you can also specify a subtree in the directory.
2: The scope of the search. Valid values are base, one, or sub. If this is left undefined, then a scope of sub is assumed. Descriptions of the scope options can be found in the table below.
3: The behavior of the search with respect to aliases in the LDAP tree. Valid values are never, search, base, or always. If this is left undefined, then the default is to always dereference aliases. Descriptions of the dereferencing behaviors can be found in the table below.
4: The time limit allowed for the search by the client, in seconds. A value of 0 imposes no client-side limit.
5: A valid LDAP search filter. If this is left undefined, then the default is (objectClass=*).
6: The optional maximum size of response pages from the server, measured in LDAP entries. If set to 0, no size restrictions will be made on pages of responses. Setting paging sizes is necessary when queries return more entries than the client or server allow by default.

Table 18.1. LDAP search scope options
LDAP search scope	Description
`base`	Only consider the object specified by the base DN given for the query.
`one`	Consider all of the objects on the same level in the tree as the base DN for the query.
`sub`	Consider the entire subtree rooted at the base DN given for the query.

Table 18.2. LDAP dereferencing behaviors
Dereferencing behavior	Description
`never`	Never dereference any aliases found in the LDAP tree.
`search`	Only dereference aliases found while searching.
`base`	Only dereference aliases while finding the base object.
`always`	Always dereference all aliases found in the LDAP tree.

User-defined name mapping: A user-defined name mapping explicitly maps the names of OpenShift Container Platform groups to unique identifiers that find groups on your LDAP server. The mapping uses normal YAML syntax. A user-defined mapping can contain an entry for every group in your LDAP server or only a subset of those groups. If there are groups on the LDAP server that do not have a user-defined name mapping, the default behavior during sync is to use the attribute specified as the OpenShift Container Platform group’s name.

User-defined name mapping

groupUIDNameMapping:
  "cn=group1,ou=groups,dc=example,dc=com": firstgroup
  "cn=group2,ou=groups,dc=example,dc=com": secondgroup
  "cn=group3,ou=groups,dc=example,dc=com": thirdgroup

18.1.1. About the RFC 2307 configuration file

The RFC 2307 schema requires you to provide an LDAP query definition for both user and group entries, as well as the attributes with which to represent them in the internal OpenShift Container Platform records.

For clarity, the group you create in OpenShift Container Platform should use attributes other than the distinguished name whenever possible for user- or administrator-facing fields. For example, identify the users of an OpenShift Container Platform group by their e-mail, and use the name of the group as the common name. The following configuration file creates these relationships:

Note

If using user-defined name mappings, your configuration file will differ.

LDAP sync configuration that uses RFC 2307 schema: rfc2307_config.yaml

kind: LDAPSyncConfig
apiVersion: v1
url: ldap://LDAP_SERVICE_IP:389 1
insecure: false 2
bindDN: cn=admin,dc=example,dc=com
bindPassword:
  file: "/etc/secrets/bindPassword"
rfc2307:
    groupsQuery:
        baseDN: "ou=groups,dc=example,dc=com"
        scope: sub
        derefAliases: never
        pageSize: 0
    groupUIDAttribute: dn 3
    groupNameAttributes: [ cn ] 4
    groupMembershipAttributes: [ member ] 5
    usersQuery:
        baseDN: "ou=users,dc=example,dc=com"
        scope: sub
        derefAliases: never
        pageSize: 0
    userUIDAttribute: dn 6
    userNameAttributes: [ mail ] 7
    tolerateMemberNotFoundErrors: false
    tolerateMemberOutOfScopeErrors: false

1: The IP address and host of the LDAP server where this group’s record is stored.
2: When false, secure LDAP (ldaps://) URLs connect using TLS, and insecure LDAP (ldap://) URLs are upgraded to TLS. When true, no TLS connection is made to the server and you cannot use ldaps:// URL schemes.
3: The attribute that uniquely identifies a group on the LDAP server. You cannot specify groupsQuery filters when using DN for groupUIDAttribute. For fine-grained filtering, use the whitelist / blacklist method.
4: The attribute to use as the name of the group.
5: The attribute on the group that stores the membership information.
6: The attribute that uniquely identifies a user on the LDAP server. You cannot specify usersQuery filters when using DN for userUIDAttribute. For fine-grained filtering, use the whitelist / blacklist method.
7: The attribute to use as the name of the user in the OpenShift Container Platform group record.

18.1.2. About the Active Directory configuration file

The Active Directory schema requires you to provide an LDAP query definition for user entries, as well as the attributes to represent them with in the internal OpenShift Container Platform group records.

For clarity, the group you create in OpenShift Container Platform should use attributes other than the distinguished name whenever possible for user- or administrator-facing fields. For example, identify the users of an OpenShift Container Platform group by their e-mail, but define the name of the group by the name of the group on the LDAP server. The following configuration file creates these relationships:

LDAP sync configuration that uses Active Directory schema: active_directory_config.yaml

kind: LDAPSyncConfig
apiVersion: v1
url: ldap://LDAP_SERVICE_IP:389
activeDirectory:
    usersQuery:
        baseDN: "ou=users,dc=example,dc=com"
        scope: sub
        derefAliases: never
        filter: (objectclass=person)
        pageSize: 0
    userNameAttributes: [ mail ] 1
    groupMembershipAttributes: [ memberOf ] 2

1: The attribute to use as the name of the user in the OpenShift Container Platform group record.
2: The attribute on the user that stores the membership information.

18.1.3. About the augmented Active Directory configuration file

The augmented Active Directory schema requires you to provide an LDAP query definition for both user entries and group entries, as well as the attributes with which to represent them in the internal OpenShift Container Platform group records.

LDAP sync configuration that uses augmented Active Directory schema: augmented_active_directory_config.yaml

kind: LDAPSyncConfig
apiVersion: v1
url: ldap://LDAP_SERVICE_IP:389
augmentedActiveDirectory:
    groupsQuery:
        baseDN: "ou=groups,dc=example,dc=com"
        scope: sub
        derefAliases: never
        pageSize: 0
    groupUIDAttribute: dn 1
    groupNameAttributes: [ cn ] 2
    usersQuery:
        baseDN: "ou=users,dc=example,dc=com"
        scope: sub
        derefAliases: never
        filter: (objectclass=person)
        pageSize: 0
    userNameAttributes: [ mail ] 3
    groupMembershipAttributes: [ memberOf ] 4

1: The attribute that uniquely identifies a group on the LDAP server. You cannot specify groupsQuery filters when using DN for groupUIDAttribute. For fine-grained filtering, use the whitelist / blacklist method.
2: The attribute to use as the name of the group.
3: The attribute to use as the name of the user in the OpenShift Container Platform group record.
4: The attribute on the user that stores the membership information.

18.2. Running LDAP sync

Once you have created a sync configuration file, you can begin to sync. OpenShift Container Platform allows administrators to perform a number of different sync types with the same server.

18.2.1. Syncing the LDAP server with OpenShift Container Platform

You can sync all groups from the LDAP server with OpenShift Container Platform.

Prerequisites

Create a sync configuration file.
You have access to the cluster as a user with the cluster-admin role.

Procedure

To sync all groups from the LDAP server with OpenShift Container Platform:
```
$ oc adm groups sync --sync-config=config.yaml --confirm
```
Note
By default, all group synchronization operations are dry-run, so you must set the --confirm flag on the oc adm groups sync command to make changes to OpenShift Container Platform group records.

18.2.2. Syncing OpenShift Container Platform groups with the LDAP server

You can sync all groups already in OpenShift Container Platform that correspond to groups in the LDAP server specified in the configuration file.

Prerequisites

Create a sync configuration file.
You have access to the cluster as a user with the cluster-admin role.

Procedure

To sync OpenShift Container Platform groups with the LDAP server:
```
$ oc adm groups sync --type=openshift --sync-config=config.yaml --confirm
```
Note
By default, all group synchronization operations are dry-run, so you must set the --confirm flag on the oc adm groups sync command to make changes to OpenShift Container Platform group records.

18.2.3. Syncing subgroups from the LDAP server with OpenShift Container Platform

You can sync a subset of LDAP groups with OpenShift Container Platform using whitelist files, blacklist files, or both.

Note

You can use any combination of blacklist files, whitelist files, or whitelist literals. Whitelist and blacklist files must contain one unique group identifier per line, and you can include whitelist literals directly in the command itself. These guidelines apply to groups found on LDAP servers as well as groups already present in OpenShift Container Platform.

Prerequisites

Create a sync configuration file.
You have access to the cluster as a user with the cluster-admin role.

Procedure

To sync a subset of LDAP groups with OpenShift Container Platform, use any the following commands:

$ oc adm groups sync --whitelist=<whitelist_file> \
                   --sync-config=config.yaml      \
                   --confirm

$ oc adm groups sync --blacklist=<blacklist_file> \
                   --sync-config=config.yaml      \
                   --confirm

$ oc adm groups sync <group_unique_identifier>    \
                   --sync-config=config.yaml      \
                   --confirm

$ oc adm groups sync <group_unique_identifier>  \
                   --whitelist=<whitelist_file> \
                   --blacklist=<blacklist_file> \
                   --sync-config=config.yaml    \
                   --confirm

$ oc adm groups sync --type=openshift           \
                   --whitelist=<whitelist_file> \
                   --sync-config=config.yaml    \
                   --confirm

Note

By default, all group synchronization operations are dry-run, so you must set the --confirm flag on the oc adm groups sync command to make changes to OpenShift Container Platform group records.

18.3. Running a group pruning job

An administrator can also choose to remove groups from OpenShift Container Platform records if the records on the LDAP server that created them are no longer present. The prune job will accept the same sync configuration file and whitelists or blacklists as used for the sync job.

For example:

$ oc adm prune groups --sync-config=/path/to/ldap-sync-config.yaml --confirm

$ oc adm prune groups --whitelist=/path/to/whitelist.txt --sync-config=/path/to/ldap-sync-config.yaml --confirm

$ oc adm prune groups --blacklist=/path/to/blacklist.txt --sync-config=/path/to/ldap-sync-config.yaml --confirm

18.4. Automatically syncing LDAP groups

You can automatically sync LDAP groups on a periodic basis by configuring a cron job.

Prerequisites

You have access to the cluster as a user with the cluster-admin role.
You have configured an LDAP identity provider (IDP).
This procedure assumes that you created an LDAP secret named ldap-secret and a config map named ca-config-map.

Procedure

Create a project where the cron job will run:
```
$ oc new-project ldap-sync 1
```
1
This procedure uses a project called ldap-sync.
Locate the secret and config map that you created when configuring the LDAP identity provider and copy them to this new project.
The secret and config map exist in the openshift-config project and must be copied to the new ldap-sync project.

Define a service account:

Example ldap-sync-service-account.yaml

kind: ServiceAccount
apiVersion: v1
metadata:
  name: ldap-group-syncer
  namespace: ldap-sync

Create the service account:

$ oc create -f ldap-sync-service-account.yaml

Define a cluster role:

Example ldap-sync-cluster-role.yaml

apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  name: ldap-group-syncer
rules:
  - apiGroups:
      - ''
      - user.openshift.io
    resources:
      - groups
    verbs:
      - get
      - list
      - create
      - update

Create the cluster role:

$ oc create -f ldap-sync-cluster-role.yaml

Define a cluster role binding to bind the cluster role to the service account:

Example ldap-sync-cluster-role-binding.yaml

kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: ldap-group-syncer
subjects:
  - kind: ServiceAccount
    name: ldap-group-syncer              1
    namespace: ldap-sync
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: ldap-group-syncer                2

1: Reference to the service account created earlier in this procedure.
2: Reference to the cluster role created earlier in this procedure.

Create the cluster role binding:

$ oc create -f ldap-sync-cluster-role-binding.yaml

Define a config map that specifies the sync configuration file:

Example ldap-sync-config-map.yaml

kind: ConfigMap
apiVersion: v1
metadata:
  name: ldap-group-syncer
  namespace: ldap-sync
data:
  sync.yaml: |                                 1
    kind: LDAPSyncConfig
    apiVersion: v1
    url: ldaps://10.0.0.0:389                  2
    insecure: false
    bindDN: cn=admin,dc=example,dc=com         3
    bindPassword:
      file: "/etc/secrets/bindPassword"
    ca: /etc/ldap-ca/ca.crt
    rfc2307:                                   4
      groupsQuery:
        baseDN: "ou=groups,dc=example,dc=com"  5
        scope: sub
        filter: "(objectClass=groupOfMembers)"
        derefAliases: never
        pageSize: 0
      groupUIDAttribute: dn
      groupNameAttributes: [ cn ]
      groupMembershipAttributes: [ member ]
      usersQuery:
        baseDN: "ou=users,dc=example,dc=com"   6
        scope: sub
        derefAliases: never
        pageSize: 0
      userUIDAttribute: dn
      userNameAttributes: [ uid ]
      tolerateMemberNotFoundErrors: false
      tolerateMemberOutOfScopeErrors: false

1: Define the sync configuration file.
2: Specify the URL.
3: Specify the bindDN.
4: This example uses the RFC2307 schema; adjust values as necessary. You can also use a different schema.
5: Specify the baseDN for groupsQuery.
6: Specify the baseDN for usersQuery.

Create the config map:

$ oc create -f ldap-sync-config-map.yaml

Define a cron job:

Example ldap-sync-cron-job.yaml

kind: CronJob
apiVersion: batch/v1
metadata:
  name: ldap-group-syncer
  namespace: ldap-sync
spec:                                                                                1
  schedule: "*/30 * * * *"                                                           2
  concurrencyPolicy: Forbid
  jobTemplate:
    spec:
      backoffLimit: 0
      ttlSecondsAfterFinished: 1800                                                  3
      template:
        spec:
          containers:
            - name: ldap-group-sync
              image: "registry.redhat.io/openshift4/ose-cli:latest"
              command:
                - "/bin/bash"
                - "-c"
                - "oc adm groups sync --sync-config=/etc/config/sync.yaml --confirm" 4
              volumeMounts:
                - mountPath: "/etc/config"
                  name: "ldap-sync-volume"
                - mountPath: "/etc/secrets"
                  name: "ldap-bind-password"
                - mountPath: "/etc/ldap-ca"
                  name: "ldap-ca"
          volumes:
            - name: "ldap-sync-volume"
              configMap:
                name: "ldap-group-syncer"
            - name: "ldap-bind-password"
              secret:
                secretName: "ldap-secret"                                            5
            - name: "ldap-ca"
              configMap:
                name: "ca-config-map"                                                6
          restartPolicy: "Never"
          terminationGracePeriodSeconds: 30
          activeDeadlineSeconds: 500
          dnsPolicy: "ClusterFirst"
          serviceAccountName: "ldap-group-syncer"

1: Configure the settings for the cron job. See "Creating cron jobs" for more information on cron job settings.
2: The schedule for the job specified in cron format. This example cron job runs every 30 minutes. Adjust the frequency as necessary, making sure to take into account how long the sync takes to run.
3: How long, in seconds, to keep finished jobs. This should match the period of the job schedule in order to clean old failed jobs and prevent unnecessary alerts. For more information, see TTL-after-finished Controller in the Kubernetes documentation.
4: The LDAP sync command for the cron job to run. Passes in the sync configuration file that was defined in the config map.
5: This secret was created when the LDAP IDP was configured.
6: This config map was created when the LDAP IDP was configured.

Create the cron job:
```
$ oc create -f ldap-sync-cron-job.yaml
```

Additional resources

18.5. LDAP group sync examples

This section contains examples for the RFC 2307, Active Directory, and augmented Active Directory schemas.

Note

These examples assume that all users are direct members of their respective groups. Specifically, no groups have other groups as members. See the Nested Membership Sync Example for information on how to sync nested groups.

18.5.1. Syncing groups using the RFC 2307 schema

For the RFC 2307 schema, the following examples synchronize a group named admins that has two members: Jane and Jim. The examples explain:

How the group and users are added to the LDAP server.
What the resulting group record in OpenShift Container Platform will be after synchronization.

Note

In the RFC 2307 schema, both users (Jane and Jim) and groups exist on the LDAP server as first-class entries, and group membership is stored in attributes on the group. The following snippet of ldif defines the users and group for this schema:

LDAP entries that use RFC 2307 schema: rfc2307.ldif

  dn: ou=users,dc=example,dc=com
  objectClass: organizationalUnit
  ou: users
  dn: cn=Jane,ou=users,dc=example,dc=com
  objectClass: person
  objectClass: organizationalPerson
  objectClass: inetOrgPerson
  cn: Jane
  sn: Smith
  displayName: Jane Smith
  mail: jane.smith@example.com
  dn: cn=Jim,ou=users,dc=example,dc=com
  objectClass: person
  objectClass: organizationalPerson
  objectClass: inetOrgPerson
  cn: Jim
  sn: Adams
  displayName: Jim Adams
  mail: jim.adams@example.com
  dn: ou=groups,dc=example,dc=com
  objectClass: organizationalUnit
  ou: groups
  dn: cn=admins,ou=groups,dc=example,dc=com 1
  objectClass: groupOfNames
  cn: admins
  owner: cn=admin,dc=example,dc=com
  description: System Administrators
  member: cn=Jane,ou=users,dc=example,dc=com 2
  member: cn=Jim,ou=users,dc=example,dc=com

1: The group is a first-class entry in the LDAP server.
2: Members of a group are listed with an identifying reference as attributes on the group.

Prerequisites

Create the configuration file.
You have access to the cluster as a user with the cluster-admin role.

Procedure

Run the sync with the rfc2307_config.yaml file:
```
$ oc adm groups sync --sync-config=rfc2307_config.yaml --confirm
```
OpenShift Container Platform creates the following group record as a result of the above sync operation:
OpenShift Container Platform group created by using the rfc2307_config.yaml file
```
apiVersion: user.openshift.io/v1
kind: Group
metadata:
  annotations:
    openshift.io/ldap.sync-time: 2015-10-13T10:08:38-0400 1
    openshift.io/ldap.uid: cn=admins,ou=groups,dc=example,dc=com 2
    openshift.io/ldap.url: LDAP_SERVER_IP:389 3
  creationTimestamp:
  name: admins 4
users: 5
- jane.smith@example.com
- jim.adams@example.com
```
1
The last time this OpenShift Container Platform group was synchronized with the LDAP server, in ISO 6801 format.
2
The unique identifier for the group on the LDAP server.
3
The IP address and host of the LDAP server where this group’s record is stored.
4
The name of the group as specified by the sync file.
5
The users that are members of the group, named as specified by the sync file.

18.5.2. Syncing groups using the RFC2307 schema with user-defined name mappings

When syncing groups with user-defined name mappings, the configuration file changes to contain these mappings as shown below.

LDAP sync configuration that uses RFC 2307 schema with user-defined name mappings: rfc2307_config_user_defined.yaml

kind: LDAPSyncConfig
apiVersion: v1
groupUIDNameMapping:
  "cn=admins,ou=groups,dc=example,dc=com": Administrators 1
rfc2307:
    groupsQuery:
        baseDN: "ou=groups,dc=example,dc=com"
        scope: sub
        derefAliases: never
        pageSize: 0
    groupUIDAttribute: dn 2
    groupNameAttributes: [ cn ] 3
    groupMembershipAttributes: [ member ]
    usersQuery:
        baseDN: "ou=users,dc=example,dc=com"
        scope: sub
        derefAliases: never
        pageSize: 0
    userUIDAttribute: dn 4
    userNameAttributes: [ mail ]
    tolerateMemberNotFoundErrors: false
    tolerateMemberOutOfScopeErrors: false

1: The user-defined name mapping.
2: The unique identifier attribute that is used for the keys in the user-defined name mapping. You cannot specify groupsQuery filters when using DN for groupUIDAttribute. For fine-grained filtering, use the whitelist / blacklist method.
3: The attribute to name OpenShift Container Platform groups with if their unique identifier is not in the user-defined name mapping.
4: The attribute that uniquely identifies a user on the LDAP server. You cannot specify usersQuery filters when using DN for userUIDAttribute. For fine-grained filtering, use the whitelist / blacklist method.

Prerequisites

Create the configuration file.
You have access to the cluster as a user with the cluster-admin role.

Procedure

Run the sync with the rfc2307_config_user_defined.yaml file:

$ oc adm groups sync --sync-config=rfc2307_config_user_defined.yaml --confirm

OpenShift Container Platform creates the following group record as a result of the above sync operation:

OpenShift Container Platform group created by using the rfc2307_config_user_defined.yaml file

apiVersion: user.openshift.io/v1
kind: Group
metadata:
  annotations:
    openshift.io/ldap.sync-time: 2015-10-13T10:08:38-0400
    openshift.io/ldap.uid: cn=admins,ou=groups,dc=example,dc=com
    openshift.io/ldap.url: LDAP_SERVER_IP:389
  creationTimestamp:
  name: Administrators 1
users:
- jane.smith@example.com
- jim.adams@example.com

1: The name of the group as specified by the user-defined name mapping.

18.5.3. Syncing groups using RFC 2307 with user-defined error tolerances

By default, if the groups being synced contain members whose entries are outside of the scope defined in the member query, the group sync fails with an error:

Error determining LDAP group membership for "<group>": membership lookup for user "<user>" in group "<group>" failed because of "search for entry with dn="<user-dn>" would search outside of the base dn specified (dn="<base-dn>")".

This often indicates a misconfigured baseDN in the usersQuery field. However, in cases where the baseDN intentionally does not contain some of the members of the group, setting tolerateMemberOutOfScopeErrors: true allows the group sync to continue. Out of scope members will be ignored.

Similarly, when the group sync process fails to locate a member for a group, it fails outright with errors:

Error determining LDAP group membership for "<group>": membership lookup for user "<user>" in group "<group>" failed because of "search for entry with base dn="<user-dn>" refers to a non-existent entry".
Error determining LDAP group membership for "<group>": membership lookup for user "<user>" in group "<group>" failed because of "search for entry with base dn="<user-dn>" and filter "<filter>" did not return any results".

This often indicates a misconfigured usersQuery field. However, in cases where the group contains member entries that are known to be missing, setting tolerateMemberNotFoundErrors: true allows the group sync to continue. Problematic members will be ignored.

Warning

Enabling error tolerances for the LDAP group sync causes the sync process to ignore problematic member entries. If the LDAP group sync is not configured correctly, this could result in synced OpenShift Container Platform groups missing members.

LDAP entries that use RFC 2307 schema with problematic group membership: rfc2307_problematic_users.ldif

  dn: ou=users,dc=example,dc=com
  objectClass: organizationalUnit
  ou: users
  dn: cn=Jane,ou=users,dc=example,dc=com
  objectClass: person
  objectClass: organizationalPerson
  objectClass: inetOrgPerson
  cn: Jane
  sn: Smith
  displayName: Jane Smith
  mail: jane.smith@example.com
  dn: cn=Jim,ou=users,dc=example,dc=com
  objectClass: person
  objectClass: organizationalPerson
  objectClass: inetOrgPerson
  cn: Jim
  sn: Adams
  displayName: Jim Adams
  mail: jim.adams@example.com
  dn: ou=groups,dc=example,dc=com
  objectClass: organizationalUnit
  ou: groups
  dn: cn=admins,ou=groups,dc=example,dc=com
  objectClass: groupOfNames
  cn: admins
  owner: cn=admin,dc=example,dc=com
  description: System Administrators
  member: cn=Jane,ou=users,dc=example,dc=com
  member: cn=Jim,ou=users,dc=example,dc=com
  member: cn=INVALID,ou=users,dc=example,dc=com 1
  member: cn=Jim,ou=OUTOFSCOPE,dc=example,dc=com 2

1: A member that does not exist on the LDAP server.
2: A member that may exist, but is not under the baseDN in the user query for the sync job.

To tolerate the errors in the above example, the following additions to your sync configuration file must be made:

LDAP sync configuration that uses RFC 2307 schema tolerating errors: rfc2307_config_tolerating.yaml

kind: LDAPSyncConfig
apiVersion: v1
url: ldap://LDAP_SERVICE_IP:389
rfc2307:
    groupsQuery:
        baseDN: "ou=groups,dc=example,dc=com"
        scope: sub
        derefAliases: never
    groupUIDAttribute: dn
    groupNameAttributes: [ cn ]
    groupMembershipAttributes: [ member ]
    usersQuery:
        baseDN: "ou=users,dc=example,dc=com"
        scope: sub
        derefAliases: never
    userUIDAttribute: dn 1
    userNameAttributes: [ mail ]
    tolerateMemberNotFoundErrors: true 2
    tolerateMemberOutOfScopeErrors: true 3

1: The attribute that uniquely identifies a user on the LDAP server. You cannot specify usersQuery filters when using DN for userUIDAttribute. For fine-grained filtering, use the whitelist / blacklist method.
2: When true, the sync job tolerates groups for which some members were not found, and members whose LDAP entries are not found are ignored. The default behavior for the sync job is to fail if a member of a group is not found.
3: When true, the sync job tolerates groups for which some members are outside the user scope given in the usersQuery base DN, and members outside the member query scope are ignored. The default behavior for the sync job is to fail if a member of a group is out of scope.

Prerequisites

Create the configuration file.
You have access to the cluster as a user with the cluster-admin role.

Procedure

Run the sync with the rfc2307_config_tolerating.yaml file:

$ oc adm groups sync --sync-config=rfc2307_config_tolerating.yaml --confirm

OpenShift Container Platform creates the following group record as a result of the above sync operation:

OpenShift Container Platform group created by using the rfc2307_config.yaml file

apiVersion: user.openshift.io/v1
kind: Group
metadata:
  annotations:
    openshift.io/ldap.sync-time: 2015-10-13T10:08:38-0400
    openshift.io/ldap.uid: cn=admins,ou=groups,dc=example,dc=com
    openshift.io/ldap.url: LDAP_SERVER_IP:389
  creationTimestamp:
  name: admins
users: 1
- jane.smith@example.com
- jim.adams@example.com

1: The users that are members of the group, as specified by the sync file. Members for which lookup encountered tolerated errors are absent.

18.5.4. Syncing groups using the Active Directory schema

In the Active Directory schema, both users (Jane and Jim) exist in the LDAP server as first-class entries, and group membership is stored in attributes on the user. The following snippet of ldif defines the users and group for this schema:

LDAP entries that use Active Directory schema: active_directory.ldif

dn: ou=users,dc=example,dc=com
objectClass: organizationalUnit
ou: users

dn: cn=Jane,ou=users,dc=example,dc=com
objectClass: person
objectClass: organizationalPerson
objectClass: inetOrgPerson
objectClass: testPerson
cn: Jane
sn: Smith
displayName: Jane Smith
mail: jane.smith@example.com
memberOf: admins 1

dn: cn=Jim,ou=users,dc=example,dc=com
objectClass: person
objectClass: organizationalPerson
objectClass: inetOrgPerson
objectClass: testPerson
cn: Jim
sn: Adams
displayName: Jim Adams
mail: jim.adams@example.com
memberOf: admins

1: The user’s group memberships are listed as attributes on the user, and the group does not exist as an entry on the server. The memberOf attribute does not have to be a literal attribute on the user; in some LDAP servers, it is created during search and returned to the client, but not committed to the database.

Prerequisites

Create the configuration file.
You have access to the cluster as a user with the cluster-admin role.

Procedure

Run the sync with the active_directory_config.yaml file:
```
$ oc adm groups sync --sync-config=active_directory_config.yaml --confirm
```
OpenShift Container Platform creates the following group record as a result of the above sync operation:
OpenShift Container Platform group created by using the active_directory_config.yaml file
```
apiVersion: user.openshift.io/v1
kind: Group
metadata:
  annotations:
    openshift.io/ldap.sync-time: 2015-10-13T10:08:38-0400 1
    openshift.io/ldap.uid: admins 2
    openshift.io/ldap.url: LDAP_SERVER_IP:389 3
  creationTimestamp:
  name: admins 4
users: 5
- jane.smith@example.com
- jim.adams@example.com
```
1
The last time this OpenShift Container Platform group was synchronized with the LDAP server, in ISO 6801 format.
2
The unique identifier for the group on the LDAP server.
3
The IP address and host of the LDAP server where this group’s record is stored.
4
The name of the group as listed in the LDAP server.
5
The users that are members of the group, named as specified by the sync file.

18.5.5. Syncing groups using the augmented Active Directory schema

In the augmented Active Directory schema, both users (Jane and Jim) and groups exist in the LDAP server as first-class entries, and group membership is stored in attributes on the user. The following snippet of ldif defines the users and group for this schema:

LDAP entries that use augmented Active Directory schema: augmented_active_directory.ldif

dn: ou=users,dc=example,dc=com
objectClass: organizationalUnit
ou: users

dn: cn=Jane,ou=users,dc=example,dc=com
objectClass: person
objectClass: organizationalPerson
objectClass: inetOrgPerson
objectClass: testPerson
cn: Jane
sn: Smith
displayName: Jane Smith
mail: jane.smith@example.com
memberOf: cn=admins,ou=groups,dc=example,dc=com 1

dn: cn=Jim,ou=users,dc=example,dc=com
objectClass: person
objectClass: organizationalPerson
objectClass: inetOrgPerson
objectClass: testPerson
cn: Jim
sn: Adams
displayName: Jim Adams
mail: jim.adams@example.com
memberOf: cn=admins,ou=groups,dc=example,dc=com

dn: ou=groups,dc=example,dc=com
objectClass: organizationalUnit
ou: groups

dn: cn=admins,ou=groups,dc=example,dc=com 2
objectClass: groupOfNames
cn: admins
owner: cn=admin,dc=example,dc=com
description: System Administrators
member: cn=Jane,ou=users,dc=example,dc=com
member: cn=Jim,ou=users,dc=example,dc=com

1: The user’s group memberships are listed as attributes on the user.
2: The group is a first-class entry on the LDAP server.

Prerequisites

Create the configuration file.
You have access to the cluster as a user with the cluster-admin role.

Procedure

Run the sync with the augmented_active_directory_config.yaml file:
```
$ oc adm groups sync --sync-config=augmented_active_directory_config.yaml --confirm
```
OpenShift Container Platform creates the following group record as a result of the above sync operation:
OpenShift Container Platform group created by using the augmented_active_directory_config.yaml file
```
apiVersion: user.openshift.io/v1
kind: Group
metadata:
  annotations:
    openshift.io/ldap.sync-time: 2015-10-13T10:08:38-0400 1
    openshift.io/ldap.uid: cn=admins,ou=groups,dc=example,dc=com 2
    openshift.io/ldap.url: LDAP_SERVER_IP:389 3
  creationTimestamp:
  name: admins 4
users: 5
- jane.smith@example.com
- jim.adams@example.com
```
1
The last time this OpenShift Container Platform group was synchronized with the LDAP server, in ISO 6801 format.
2
The unique identifier for the group on the LDAP server.
3
The IP address and host of the LDAP server where this group’s record is stored.
4
The name of the group as specified by the sync file.
5
The users that are members of the group, named as specified by the sync file.

18.5.5.1. LDAP nested membership sync example

Groups in OpenShift Container Platform do not nest. The LDAP server must flatten group membership before the data can be consumed. Microsoft’s Active Directory Server supports this feature via the LDAP_MATCHING_RULE_IN_CHAIN rule, which has the OID 1.2.840.113556.1.4.1941. Furthermore, only explicitly whitelisted groups can be synced when using this matching rule.

This section has an example for the augmented Active Directory schema, which synchronizes a group named admins that has one user Jane and one group otheradmins as members. The otheradmins group has one user member: Jim. This example explains:

How the group and users are added to the LDAP server.
What the LDAP sync configuration file looks like.
What the resulting group record in OpenShift Container Platform will be after synchronization.

In the augmented Active Directory schema, both users (Jane and Jim) and groups exist in the LDAP server as first-class entries, and group membership is stored in attributes on the user or the group. The following snippet of ldif defines the users and groups for this schema:

LDAP entries that use augmented Active Directory schema with nested members: augmented_active_directory_nested.ldif

dn: ou=users,dc=example,dc=com
objectClass: organizationalUnit
ou: users

dn: cn=Jane,ou=users,dc=example,dc=com
objectClass: person
objectClass: organizationalPerson
objectClass: inetOrgPerson
objectClass: testPerson
cn: Jane
sn: Smith
displayName: Jane Smith
mail: jane.smith@example.com
memberOf: cn=admins,ou=groups,dc=example,dc=com 1

dn: cn=Jim,ou=users,dc=example,dc=com
objectClass: person
objectClass: organizationalPerson
objectClass: inetOrgPerson
objectClass: testPerson
cn: Jim
sn: Adams
displayName: Jim Adams
mail: jim.adams@example.com
memberOf: cn=otheradmins,ou=groups,dc=example,dc=com 2

dn: ou=groups,dc=example,dc=com
objectClass: organizationalUnit
ou: groups

dn: cn=admins,ou=groups,dc=example,dc=com 3
objectClass: group
cn: admins
owner: cn=admin,dc=example,dc=com
description: System Administrators
member: cn=Jane,ou=users,dc=example,dc=com
member: cn=otheradmins,ou=groups,dc=example,dc=com

dn: cn=otheradmins,ou=groups,dc=example,dc=com 4
objectClass: group
cn: otheradmins
owner: cn=admin,dc=example,dc=com
description: Other System Administrators
memberOf: cn=admins,ou=groups,dc=example,dc=com 5 6
member: cn=Jim,ou=users,dc=example,dc=com

1 2 5: The user’s and group’s memberships are listed as attributes on the object.
3 4: The groups are first-class entries on the LDAP server.
6: The otheradmins group is a member of the admins group.

When syncing nested groups with Active Directory, you must provide an LDAP query definition for both user entries and group entries, as well as the attributes with which to represent them in the internal OpenShift Container Platform group records. Furthermore, certain changes are required in this configuration:

The oc adm groups sync command must explicitly whitelist groups.
The user’s groupMembershipAttributes must include "memberOf:1.2.840.113556.1.4.1941:" to comply with the LDAP_MATCHING_RULE_IN_CHAIN rule.
The groupUIDAttribute must be set to dn.
The groupsQuery:
- Must not set filter.
- Must set a valid derefAliases.
- Should not set baseDN as that value is ignored.
- Should not set scope as that value is ignored.

LDAP sync configuration that uses augmented Active Directory schema with nested members: augmented_active_directory_config_nested.yaml

kind: LDAPSyncConfig
apiVersion: v1
url: ldap://LDAP_SERVICE_IP:389
augmentedActiveDirectory:
    groupsQuery: 1
        derefAliases: never
        pageSize: 0
    groupUIDAttribute: dn 2
    groupNameAttributes: [ cn ] 3
    usersQuery:
        baseDN: "ou=users,dc=example,dc=com"
        scope: sub
        derefAliases: never
        filter: (objectclass=person)
        pageSize: 0
    userNameAttributes: [ mail ] 4
    groupMembershipAttributes: [ "memberOf:1.2.840.113556.1.4.1941:" ] 5

1: groupsQuery filters cannot be specified. The groupsQuery base DN and scope values are ignored. groupsQuery must set a valid derefAliases.
2: The attribute that uniquely identifies a group on the LDAP server. It must be set to dn.
3: The attribute to use as the name of the group.
4: The attribute to use as the name of the user in the OpenShift Container Platform group record. mail or sAMAccountName are preferred choices in most installations.
5: The attribute on the user that stores the membership information. Note the use of LDAP_MATCHING_RULE_IN_CHAIN.

Prerequisites

Create the configuration file.
You have access to the cluster as a user with the cluster-admin role.

Procedure

Run the sync with the augmented_active_directory_config_nested.yaml file:
```
$ oc adm groups sync \
    'cn=admins,ou=groups,dc=example,dc=com' \
    --sync-config=augmented_active_directory_config_nested.yaml \
    --confirm
```
Note
You must explicitly whitelist the cn=admins,ou=groups,dc=example,dc=com group.
OpenShift Container Platform creates the following group record as a result of the above sync operation:
OpenShift Container Platform group created by using the augmented_active_directory_config_nested.yaml file
```
apiVersion: user.openshift.io/v1
kind: Group
metadata:
  annotations:
    openshift.io/ldap.sync-time: 2015-10-13T10:08:38-0400 1
    openshift.io/ldap.uid: cn=admins,ou=groups,dc=example,dc=com 2
    openshift.io/ldap.url: LDAP_SERVER_IP:389 3
  creationTimestamp:
  name: admins 4
users: 5
- jane.smith@example.com
- jim.adams@example.com
```
1
The last time this OpenShift Container Platform group was synchronized with the LDAP server, in ISO 6801 format.
2
The unique identifier for the group on the LDAP server.
3
The IP address and host of the LDAP server where this group’s record is stored.
4
The name of the group as specified by the sync file.
5
The users that are members of the group, named as specified by the sync file. Note that members of nested groups are included since the group membership was flattened by the Microsoft Active Directory Server.

18.6. LDAP sync configuration specification

The object specification for the configuration file is below. Note that the different schema objects have different fields. For example, v1.ActiveDirectoryConfig has no groupsQuery field whereas v1.RFC2307Config and v1.AugmentedActiveDirectoryConfig both do.

Important

There is no support for binary attributes. All attribute data coming from the LDAP server must be in the format of a UTF-8 encoded string. For example, never use a binary attribute, such as objectGUID, as an ID attribute. You must use string attributes, such as sAMAccountName or userPrincipalName, instead.

18.6.1. v1.LDAPSyncConfig

LDAPSyncConfig holds the necessary configuration options to define an LDAP group sync.

Name	Description	Schema
`kind`	String value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#types-kinds	string
`apiVersion`	Defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#resources	string
`url`	Host is the scheme, host and port of the LDAP server to connect to: `scheme://host:port`	string
`bindDN`	Optional DN to bind to the LDAP server with.	string
`bindPassword`	Optional password to bind with during the search phase.	v1.StringSource
`insecure`	If `true`, indicates the connection should not use TLS. If `false`, `ldaps://` URLs connect using TLS, and `ldap://` URLs are upgraded to a TLS connection using StartTLS as specified in https://tools.ietf.org/html/rfc2830. If you set `insecure` to `true`, you cannot use `ldaps://` URL schemes.	boolean
`ca`	Optional trusted certificate authority bundle to use when making requests to the server. If empty, the default system roots are used.	string
`groupUIDNameMapping`	Optional direct mapping of LDAP group UIDs to OpenShift Container Platform group names.	object
`rfc2307`	Holds the configuration for extracting data from an LDAP server set up in a fashion similar to RFC2307: first-class group and user entries, with group membership determined by a multi-valued attribute on the group entry listing its members.	v1.RFC2307Config
`activeDirectory`	Holds the configuration for extracting data from an LDAP server set up in a fashion similar to that used in Active Directory: first-class user entries, with group membership determined by a multi-valued attribute on members listing groups they are a member of.	v1.ActiveDirectoryConfig
`augmentedActiveDirectory`	Holds the configuration for extracting data from an LDAP server set up in a fashion similar to that used in Active Directory as described above, with one addition: first-class group entries exist and are used to hold metadata but not group membership.	v1.AugmentedActiveDirectoryConfig

18.6.2. v1.StringSource

StringSource allows specifying a string inline, or externally via environment variable or file. When it contains only a string value, it marshals to a simple JSON string.

Name	Description	Schema
`value`	Specifies the cleartext value, or an encrypted value if `keyFile` is specified.	string
`env`	Specifies an environment variable containing the cleartext value, or an encrypted value if the `keyFile` is specified.	string
`file`	References a file containing the cleartext value, or an encrypted value if a `keyFile` is specified.	string
`keyFile`	References a file containing the key to use to decrypt the value.	string

18.6.3. v1.LDAPQuery

LDAPQuery holds the options necessary to build an LDAP query.

Name	Description	Schema
`baseDN`	DN of the branch of the directory where all searches should start from.	string
`scope`	The optional scope of the search. Can be `base`: only the base object, `one`: all objects on the base level, `sub`: the entire subtree. Defaults to `sub` if not set.	string
`derefAliases`	The optional behavior of the search with regards to aliases. Can be `never`: never dereference aliases, `search`: only dereference in searching, `base`: only dereference in finding the base object, `always`: always dereference. Defaults to `always` if not set.	string
`timeout`	Holds the limit of time in seconds that any request to the server can remain outstanding before the wait for a response is given up. If this is `0`, no client-side limit is imposed.	integer
`filter`	A valid LDAP search filter that retrieves all relevant entries from the LDAP server with the base DN.	string
`pageSize`	Maximum preferred page size, measured in LDAP entries. A page size of `0` means no paging will be done.	integer

18.6.4. v1.RFC2307Config

RFC2307Config holds the necessary configuration options to define how an LDAP group sync interacts with an LDAP server using the RFC2307 schema.

Name	Description	Schema
`groupsQuery`	Holds the template for an LDAP query that returns group entries.	v1.LDAPQuery
`groupUIDAttribute`	Defines which attribute on an LDAP group entry will be interpreted as its unique identifier. (`ldapGroupUID`)	string
`groupNameAttributes`	Defines which attributes on an LDAP group entry will be interpreted as its name to use for an OpenShift Container Platform group.	string array
`groupMembershipAttributes`	Defines which attributes on an LDAP group entry will be interpreted as its members. The values contained in those attributes must be queryable by your `UserUIDAttribute`.	string array
`usersQuery`	Holds the template for an LDAP query that returns user entries.	v1.LDAPQuery
`userUIDAttribute`	Defines which attribute on an LDAP user entry will be interpreted as its unique identifier. It must correspond to values that will be found from the `GroupMembershipAttributes`.	string
`userNameAttributes`	Defines which attributes on an LDAP user entry will be used, in order, as its OpenShift Container Platform user name. The first attribute with a non-empty value is used. This should match your `PreferredUsername` setting for your `LDAPPasswordIdentityProvider`. The attribute to use as the name of the user in the OpenShift Container Platform group record. `mail` or `sAMAccountName` are preferred choices in most installations.	string array
`tolerateMemberNotFoundErrors`	Determines the behavior of the LDAP sync job when missing user entries are encountered. If `true`, an LDAP query for users that does not find any will be tolerated and an only and error will be logged. If `false`, the LDAP sync job will fail if a query for users doesn’t find any. The default value is `false`. Misconfigured LDAP sync jobs with this flag set to `true` can cause group membership to be removed, so it is recommended to use this flag with caution.	boolean
`tolerateMemberOutOfScopeErrors`	Determines the behavior of the LDAP sync job when out-of-scope user entries are encountered. If `true`, an LDAP query for a user that falls outside of the base DN given for the all user query will be tolerated and only an error will be logged. If `false`, the LDAP sync job will fail if a user query would search outside of the base DN specified by the all user query. Misconfigured LDAP sync jobs with this flag set to `true` can result in groups missing users, so it is recommended to use this flag with caution.	boolean

18.6.5. v1.ActiveDirectoryConfig

ActiveDirectoryConfig holds the necessary configuration options to define how an LDAP group sync interacts with an LDAP server using the Active Directory schema.

Name	Description	Schema
`usersQuery`	Holds the template for an LDAP query that returns user entries.	v1.LDAPQuery
`userNameAttributes`	Defines which attributes on an LDAP user entry will be interpreted as its OpenShift Container Platform user name. The attribute to use as the name of the user in the OpenShift Container Platform group record. `mail` or `sAMAccountName` are preferred choices in most installations.	string array
`groupMembershipAttributes`	Defines which attributes on an LDAP user entry will be interpreted as the groups it is a member of.	string array

18.6.6. v1.AugmentedActiveDirectoryConfig

AugmentedActiveDirectoryConfig holds the necessary configuration options to define how an LDAP group sync interacts with an LDAP server using the augmented Active Directory schema.

Name	Description	Schema
`usersQuery`	Holds the template for an LDAP query that returns user entries.	v1.LDAPQuery
`userNameAttributes`	Defines which attributes on an LDAP user entry will be interpreted as its OpenShift Container Platform user name. The attribute to use as the name of the user in the OpenShift Container Platform group record. `mail` or `sAMAccountName` are preferred choices in most installations.	string array
`groupMembershipAttributes`	Defines which attributes on an LDAP user entry will be interpreted as the groups it is a member of.	string array
`groupsQuery`	Holds the template for an LDAP query that returns group entries.	v1.LDAPQuery
`groupUIDAttribute`	Defines which attribute on an LDAP group entry will be interpreted as its unique identifier. (`ldapGroupUID`)	string
`groupNameAttributes`	Defines which attributes on an LDAP group entry will be interpreted as its name to use for an OpenShift Container Platform group.	string array

Questo contenuto non è disponibile nella lingua selezionata.

Chapter 18. Syncing LDAP groups

18.1. About configuring LDAP sync

18.1.1. About the RFC 2307 configuration file

18.1.2. About the Active Directory configuration file

18.1.3. About the augmented Active Directory configuration file

18.2. Running LDAP sync

18.2.1. Syncing the LDAP server with OpenShift Container Platform

18.2.2. Syncing OpenShift Container Platform groups with the LDAP server

18.2.3. Syncing subgroups from the LDAP server with OpenShift Container Platform

18.3. Running a group pruning job

18.4. Automatically syncing LDAP groups

18.5. LDAP group sync examples

18.5.1. Syncing groups using the RFC 2307 schema

18.5.2. Syncing groups using the RFC2307 schema with user-defined name mappings

18.5.3. Syncing groups using RFC 2307 with user-defined error tolerances

18.5.4. Syncing groups using the Active Directory schema

18.5.5. Syncing groups using the augmented Active Directory schema

18.5.5.1. LDAP nested membership sync example

18.6. LDAP sync configuration specification

18.6.1. v1.LDAPSyncConfig

18.6.2. v1.StringSource

18.6.3. v1.LDAPQuery

18.6.4. v1.RFC2307Config

18.6.5. v1.ActiveDirectoryConfig

18.6.6. v1.AugmentedActiveDirectoryConfig

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Rendiamo l’open source più inclusivo

Informazioni su Red Hat

Red Hat legal and privacy links

Red Hat legal and privacy links