Red Hat Summit Red Hat SummitSupportoConsoleSviluppatoriInizia una provaContatti

Questo contenuto non è disponibile nella lingua selezionata.

Chapter 14. Pruning objects to reclaim resources

Over time, API objects created in OpenShift Container Platform can accumulate in the cluster’s etcd data store through normal user operations, such as when building and deploying applications.

Cluster administrators can periodically prune older versions of objects from the cluster that are no longer required. For example, by pruning images you can delete older images and layers that are no longer in use, but are still taking up disk space.

14.1. Basic pruning operations
Copia collegamento

The CLI groups prune operations under a common parent command: 

$ oc adm prune <object_type> <options>
Copy to Clipboard Toggle word wrap

This specifies:

  • The <object_type> to perform the action on, such as groups, builds, deployments, or images.
  • The <options> supported to prune that object type.

14.2. Pruning groups
Copia collegamento

To prune groups records from an external provider, administrators can run the following command: 

$ oc adm prune groups \
    --sync-config=path/to/sync/config [<options>]
Copy to Clipboard Toggle word wrap
Expand
Table 14.1. oc adm prune groups flags
OptionsDescription

--confirm

Indicate that pruning should occur, instead of performing a dry-run.

--blacklist

Path to the group blacklist file.

--whitelist

Path to the group whitelist file.

--sync-config

Path to the synchronization configuration file.

Procedure

  1. To see the groups that the prune command deletes, run the following command: 

    $ oc adm prune groups --sync-config=ldap-sync-config.yaml
    Copy to Clipboard Toggle word wrap

  2. To perform the prune operation, add the --confirm flag: 

    $ oc adm prune groups --sync-config=ldap-sync-config.yaml --confirm
    Copy to Clipboard Toggle word wrap

14.3. Pruning deployment resources
Copia collegamento

You can prune resources associated with deployments that are no longer required by the system, due to age and status.

The following command prunes replication controllers associated with DeploymentConfig objects: 

$ oc adm prune deployments [<options>]
Copy to Clipboard Toggle word wrap
Note

To also prune replica sets associated with Deployment objects, use the --replica-sets flag. This flag is currently a Technology Preview feature.

Expand
Table 14.2. oc adm prune deployments flags
OptionDescription

--confirm

Indicate that pruning should occur, instead of performing a dry-run.

--keep-complete=<N>

Per the DeploymentConfig object, keep the last N replication controllers that have a status of Complete and replica count of zero. The default is 5.

--keep-failed=<N>

Per the DeploymentConfig object, keep the last N replication controllers that have a status of Failed and replica count of zero. The default is 1.

--keep-younger-than=<duration>

Do not prune any replication controller that is younger than <duration> relative to the current time. Valid units of measurement include nanoseconds (ns), microseconds (us), milliseconds (ms), seconds (s), minutes (m), and hours (h). The default is 60m.

--orphans

Prune all replication controllers that no longer have a DeploymentConfig object, has status of Complete or Failed, and has a replica count of zero.

--replica-sets=true|false

If true, replica sets are included in the pruning process. The default is false.

Important

This flag is a Technology Preview feature.

Procedure

  1. To see what a pruning operation would delete, run the following command: 

    $ oc adm prune deployments --orphans --keep-complete=5 --keep-failed=1 \
    --keep-younger-than=60m
    Copy to Clipboard Toggle word wrap

  2. To actually perform the prune operation, add the --confirm flag: 

    $ oc adm prune deployments --orphans --keep-complete=5 --keep-failed=1 \
    --keep-younger-than=60m --confirm
    Copy to Clipboard Toggle word wrap

14.4. Pruning builds
Copia collegamento

To prune builds that are no longer required by the system due to age and status, administrators can run the following command: 

$ oc adm prune builds [<options>]
Copy to Clipboard Toggle word wrap
Expand
Table 14.3. oc adm prune builds flags
OptionDescription

--confirm

Indicate that pruning should occur, instead of performing a dry-run.

--orphans

Prune all builds whose build configuration no longer exists, status is complete, failed, error, or canceled.

--keep-complete=<N>

Per build configuration, keep the last N builds whose status is complete. The default is 5.

--keep-failed=<N>

Per build configuration, keep the last N builds whose status is failed, error, or canceled. The default is 1.

--keep-younger-than=<duration>

Do not prune any object that is younger than <duration> relative to the current time. The default is 60m.

Procedure

  1. To see what a pruning operation would delete, run the following command: 

    $ oc adm prune builds --orphans --keep-complete=5 --keep-failed=1 \
    --keep-younger-than=60m
    Copy to Clipboard Toggle word wrap

  2. To actually perform the prune operation, add the --confirm flag: 

    $ oc adm prune builds --orphans --keep-complete=5 --keep-failed=1 \
    --keep-younger-than=60m --confirm
    Copy to Clipboard Toggle word wrap
Note

Developers can enable automatic build pruning by modifying their build configuration.

14.5. Automatically pruning images
Copia collegamento

Images from the OpenShift image registry that are no longer required by the system due to age, status, or exceed limits are automatically pruned. Cluster administrators can configure the Pruning Custom Resource, or suspend it.

Prerequisites

  • You have access to an OpenShift Container Platform cluster using an account with cluster administrator permissions.
  • Install the oc CLI.

Procedure

  • Verify that the object named imagepruners.imageregistry.operator.openshift.io/cluster contains the following spec and status fields: 
spec:
  schedule: 0 0 * * *
1 

  suspend: false
2 

  keepTagRevisions: 3
3 

  keepYoungerThanDuration: 60m
4 

  keepYoungerThan: 3600000000000
5 

  resources: {}
6 

  affinity: {}
7 

  nodeSelector: {}
8 

  tolerations: []
9 

  successfulJobsHistoryLimit: 3
10 

  failedJobsHistoryLimit: 3
11 

status:
  observedGeneration: 2
12 

  conditions:
13 

  - type: Available
    status: "True"
    lastTransitionTime: 2019-10-09T03:13:45
    reason: Ready
    message: "Periodic image pruner has been created."
  - type: Scheduled
    status: "True"
    lastTransitionTime: 2019-10-09T03:13:45
    reason: Scheduled
    message: "Image pruner job has been scheduled."
  - type: Failed
    staus: "False"
    lastTransitionTime: 2019-10-09T03:13:45
    reason: Succeeded
    message: "Most recent image pruning job succeeded."
Copy to Clipboard Toggle word wrap
1
schedule: CronJob formatted schedule. This is an optional field, default is daily at midnight.
2
suspend: If set to true, the CronJob running pruning is suspended. This is an optional field, default is false. The initial value on new clusters is false.
3
keepTagRevisions: The number of revisions per tag to keep. This is an optional field, default is 3. The initial value is 3.
4
keepYoungerThanDuration: Retain images younger than this duration. This is an optional field. If a value is not specified, either keepYoungerThan or the default value 60m (60 minutes) is used.
5
keepYoungerThan: Deprecated. The same as keepYoungerThanDuration, but the duration is specified as an integer in nanoseconds. This is an optional field. When keepYoungerThanDuration is set, this field is ignored.
6
resources: Standard pod resource requests and limits. This is an optional field.
7
affinity: Standard pod affinity. This is an optional field.
8
nodeSelector: Standard pod node selector. This is an optional field.
9
tolerations: Standard pod tolerations. This is an optional field.
10
successfulJobsHistoryLimit: The maximum number of successful jobs to retain. Must be >= 1 to ensure metrics are reported. This is an optional field, default is 3. The initial value is 3.
11
failedJobsHistoryLimit: The maximum number of failed jobs to retain. Must be >= 1 to ensure metrics are reported. This is an optional field, default is 3. The initial value is 3.
12
observedGeneration: The generation observed by the Operator.
13
conditions: The standard condition objects with the following types:
  • Available: Indicates if the pruning job has been created. Reasons can be Ready or Error.
  • Scheduled: Indicates if the next pruning job has been scheduled. Reasons can be Scheduled, Suspended, or Error.
  • Failed: Indicates if the most recent pruning job failed.
Important

The Image Registry Operator’s behavior for managing the pruner is orthogonal to the managementState specified on the Image Registry Operator’s ClusterOperator object. If the Image Registry Operator is not in the Managed state, the image pruner can still be configured and managed by the Pruning Custom Resource.

However, the managementState of the Image Registry Operator alters the behavior of the deployed image pruner job:

  • Managed: the --prune-registry flag for the image pruner is set to true.
  • Removed: the --prune-registry flag for the image pruner is set to false, meaning it only prunes image metadata in etcd.

14.6. Manually pruning images
Copia collegamento

The pruning custom resource enables automatic image pruning for the images from the OpenShift image registry. Administrators can manually prune images with the oc adm prune images <image_prune_option> command. For example: 

$ oc adm prune images <image_prune_option>
1
Copy to Clipboard Toggle word wrap
1
For more information about available pruning options, see "Manual image pruning command options".

This command removes images that are no longer required by the system.

Depending on your needs, you can prune images based on their age and tag history, or prune images that cause a project to exceed its defined storage limits.

14.6.1. Considerations when pruning images
Copia collegamento

Consider the following information before manually pruning images:

  • Pruning with the --namespace flag does not remove images. It only removes image streams, because images are cluster-scoped resources. Limiting pruning to a particular namespace makes it impossible to calculate current usage.

  • By default, the integrated registry caches metadata of blobs to reduce the number of requests to storage, and to increase request-processing speed. Pruning does not update the integrated registry cache. Images that still contain pruned layers after pruning will be broken because the pruned layers that have metadata in the cache will not be pushed. Therefore, you must redeploy the registry to clear the cache after pruning: 

    $ oc rollout restart deployment/image-registry -n openshift-image-registry
    Copy to Clipboard Toggle word wrap
  • If the integrated registry uses a Redis cache, you must clean the database manually.
  • If redeploying the registry after pruning is not an option, then you must permanently disable the cache.
  • oc adm prune images operations require a route for your registry. Registry routes are not created by default.

14.6.2. Limitations when pruning images
Copia collegamento

The following limitations apply when pruning an image:

  • Pruning images from external registries is unsupported.
  • When an image is pruned, all references to the image are removed from all image streams that contain the image in status.tags.
  • Image layers that are no longer referenced by any images are removed.

14.6.3. Image prune conditions
Copia collegamento

OpenShift Container Platform supports two methodologies for pruning images:

  1. Pruning by age and tag
  2. Pruning by size limit

These methodologies are mutually exclusive. You must choose whether to prune by age and tag, or by size limit. Regardless of the method that you choose, the image pruner checks to ensure that images in use are not removed.

An image is only pruned if it meets the primary condition and is not actively referenced by a system component.

14.6.3.1. Pruning an image by age and tag
Copia collegamento

Pruning an image by age and tag is the default pruning strategy. It identifies images for removal by using the --keep-younger-than and --keep-tag-revisions flags. To prune an image by age and tag, the image must be older than the --keep-younger-than threshold, not one of the most recent tag revisions, and cannot be in use by an active workload.

For an image to be pruned by age and tag, all of the following conditions must be met:

  1. The image is managed by OpenShift Container Platform or has the openshift.io/image.managed annotation.
  2. The image is older than the time specified by the --keep-younger-than flag.
  3. The image is not one of the most recent images for its tag, as specified by the --keep-tag-revisions flag.

  4. The image is not currently referenced by any of the following active or recent API objects:

    • Pods or image streams created more recently than the --keep-younger-than duration.
    • Running or pending pods
    • Deployments, replication controllers, replica sets, or stateful sets.
    • Builds, build configurations, jobs, or cronjobs.

An image is only removed if it is old, not a recent tag revision, and is confirmed to have no active references by system components.

14.6.3.2. Pruning an image by size limit
Copia collegamento

Pruning an image by size limit uses the --prune-over-size-limit flag. This method is used to bring a project back under its defined image storage limit.

Note

The --prune-over-size-limit flag cannot be combined with the --keep-tag-revisions flag nor the --keep-younger-than flags. Doing so returns information that this operation is not allowed.

For an image to be pruned using this method, all of the following conditions must be true:

  1. The image is part of a project that is currently exceeding its smallest defined size limit.
  2. The image is selected by the pruner as a candidate for deletion to reduce the total size.

  3. The image is not currently referenced by any of the following active API objects:

    • Pods that are in a running or pending state.
    • Deployments, replication controllers, replica sets, or stateful sets.
    • Builds, build configurations, jobs, or cronjobs.

With this method, the primary trigger is the project’s size, but the safety check to ensure that the image is not actively in use is still performed.

14.6.4. Running image prune operations
Copia collegamento

Use the following procedure to run an image prune operation

Prerequisites

  • You must be logged into the CLI with an access token.
  • You must have the system:image-pruner cluster role or greater (for example, cluster-admin).
  • The image registry must be exposed.
  • You have reviewed the "Considerations when manually pruning images" section of this document.

Procedure

  1. Optional: To preview which images would be pruned, enter the following command. This command prints a list of the images, image streams, and pods that would be removed. Note that nothing is deleted until you add the --confirm flag. 

    $ oc adm prune images <image_prune_option_one> <image_prune_option_two>
    1
    Copy to Clipboard Toggle word wrap
    1
    For more information about available pruning options, see "Manual image pruning command options".
  2. Review the output to confirm the list of images, image streams, and pods to be removed.

  3. Run the oc adm prune images command with the appropriate options for your cluster. Add the --confirm flag to confirm deletion. For example: 

    $ oc adm prune images <image_prune_option_one> <image_prune_option_two> --confirm
    Copy to Clipboard Toggle word wrap

14.6.5. Using secure or insecure connections
Copia collegamento

The secure connection is the preferred and recommended approach. It is done over HTTPS protocol with a mandatory certificate verification. The prune command always attempts to use it if possible. If it is not possible, in some cases it can fall-back to insecure connection, which is dangerous. In this case, either certificate verification is skipped or plain HTTP protocol is used.

The fall-back to insecure connection is allowed in the following cases unless --certificate-authority is specified:

  1. The prune command is run with the --force-insecure option.
  2. The provided registry-url is prefixed with the http:// scheme.
  3. The provided registry-url is a local-link address or localhost.
  4. The configuration of the current user allows for an insecure connection. This can be caused by the user either logging in using --insecure-skip-tls-verify or choosing the insecure connection when prompted.
Important

If the registry is secured by a certificate authority different from the one used by OpenShift Container Platform, it must be specified using the --certificate-authority flag. Otherwise, the prune command fails with an error.

14.6.6. Image pruning CLI options
Copia collegamento

The following table describes the options you can use with the oc adm prune images <image_prune_option> command.

Expand
Table 14.4. Manual image pruning command options
OptionDescription

--all

Include images that were not pushed to the registry, but have been mirrored by pullthrough. This is on by default. To limit the pruning to images that were pushed to the integrated registry, pass --all=false.

--certificate-authority

The path to a certificate authority file to use when communicating with the OpenShift Container Platform-managed registries. Defaults to the certificate authority data from the current user’s configuration file. If provided, a secure connection is initiated.

--confirm

Indicate that pruning should occur, instead of performing a test-run. This requires a valid route to the integrated container image registry. If this command is run outside of the cluster network, the route must be provided using --registry-url.

--force-insecure

Use caution with this option. Allow an insecure connection to the container registry that is hosted via HTTP or has an invalid HTTPS certificate.

--keep-tag-revisions=<N>

For each imagestream, keep up to at most N image revisions per tag (default 3).

--keep-younger-than=<duration>

Do not prune any image that is younger than <duration> relative to the current time. Alternately, do not prune any image that is referenced by any other object that is younger than <duration> relative to the current time (default 60m).

--prune-over-size-limit

Prune each image that exceeds the smallest limit defined in the same project. This flag cannot be combined with --keep-tag-revisions nor --keep-younger-than.

--registry-url

The address to use when contacting the registry. The command attempts to use a cluster-internal URL determined from managed images and image streams. In case it fails (the registry cannot be resolved or reached), an alternative route that works needs to be provided using this flag. The registry hostname can be prefixed by https:// or http://, which enforces particular connection protocol.

--prune-registry

In conjunction with the conditions stipulated by the other options, this option controls whether the data in the registry corresponding to the OpenShift Container Platform image API object is pruned. By default, image pruning processes both the image API objects and corresponding data in the registry.

This option is useful when you are only concerned with removing etcd content, to reduce the number of image objects but are not concerned with cleaning up registry storage, or if you intend to do that separately by hard pruning the registry during an appropriate maintenance window for the registry.

14.6.6.1. Additional information about the --prune-registry flag
Copia collegamento

You can separate the removal of OpenShift Container Platform image API objects from the removal of image data in the registry by passing in the --prune-registry=false flag. For example, the following command prunes only the API objects, leaving the registry storage untouched: 

$ oc adm prune images --keep-tag-revisions=3 --keep-younger-than=60m --confirm --prune-registry=false
Copy to Clipboard Toggle word wrap

Then, you can perform a hard prune of the registry to remove the associated image data. This approach can narrow the timing window for race conditions compared to pruning both in a single command.

However, timing windows are not completely eliminated. For example, a pod might still be created that references an image while that image is being identified for pruning. You should track any API objects created during pruning to ensure that they do not reference deleted content.

Re-running the pruning without the --prune-registry option, or with --prune-registry=true, does not remove the associated registry storage for images previously pruned with --prune-registry=false. Those images can only be removed from registry storage by performing a hard prune of the registry. For more information, see "Hard pruning the registry".

14.6.7. Image pruning problems
Copia collegamento

14.6.7.1. Images not being pruned
Copia collegamento

If your images keep accumulating and the prune command removes just a small portion of what you expect, ensure that you understand the image prune conditions that must apply for an image to be considered a candidate for pruning.

Ensure that images you want removed occur at higher positions in each tag history than your chosen tag revisions threshold. For example, consider an old and obsolete image named sha256:abz. By running the following command in your namespace, where the image is tagged, the image is tagged three times in a single image stream named myapp: 

$ oc get is -n <namespace> -o go-template='{{range $isi, $is := .items}}{{range $ti, $tag := $is.status.tags}}'\
'{{range $ii, $item := $tag.items}}{{if eq $item.image "sha256:<hash>"}}{{$is.metadata.name}}:{{$tag.tag}} at position {{$ii}} out of {{len $tag.items}}\n'\
'{{end}}{{end}}{{end}}{{end}}'
Copy to Clipboard Toggle word wrap

Example output

myapp:v2 at position 4 out of 5
myapp:v2.1 at position 2 out of 2
myapp:v2.1-may-2016 at position 0 out of 1
Copy to Clipboard Toggle word wrap

When default options are used, the image is never pruned because it occurs at position 0 in a history of myapp:v2.1-may-2016 tag. For an image to be considered for pruning, the administrator must either:

  • Specify --keep-tag-revisions=0 with the oc adm prune images command.

    Warning

    This action removes all the tags from all the namespaces with underlying images, unless they are younger or they are referenced by objects younger than the specified threshold.

  • Delete all the istags where the position is below the revision threshold, which means myapp:v2.1 and myapp:v2.1-may-2016.
  • Move the image further in the history, either by running new builds pushing to the same istag, or by tagging other image. This is not always desirable for old release tags.

Tags having a date or time of a particular image’s build in their names should be avoided, unless the image must be preserved for an undefined amount of time. Such tags tend to have just one image in their history, which prevents them from ever being pruned.

14.6.7.2. Using a secure connection against insecure registry
Copia collegamento

If you see a message similar to the following in the output of the oc adm prune images command, then your registry is not secured and the oc adm prune images client attempts to use a secure connection: 

error: error communicating with registry: Get https://172.30.30.30:5000/healthz: http: server gave HTTP response to HTTPS client
Copy to Clipboard Toggle word wrap
  • The recommended solution is to secure the registry. Otherwise, you can force the client to use an insecure connection by appending --force-insecure to the command; however, this is not recommended.

14.6.7.3. Using an insecure connection against a secured registry
Copia collegamento

If you see one of the following errors in the output of the oc adm prune images command, it means that your registry is secured using a certificate signed by a certificate authority other than the one used by oc adm prune images client for connection verification: 

error: error communicating with registry: Get http://172.30.30.30:5000/healthz: malformed HTTP response "\x15\x03\x01\x00\x02\x02"
error: error communicating with registry: [Get https://172.30.30.30:5000/healthz: x509: certificate signed by unknown authority, Get http://172.30.30.30:5000/healthz: malformed HTTP response "\x15\x03\x01\x00\x02\x02"]
Copy to Clipboard Toggle word wrap

By default, the certificate authority data stored in the user’s configuration files is used; the same is true for communication with the master API.

Use the --certificate-authority option to provide the right certificate authority for the container image registry server.

14.6.7.4. Using the wrong certificate authority
Copia collegamento

The following error means that the certificate authority used to sign the certificate of the secured container image registry is different from the authority used by the client: 

error: error communicating with registry: Get https://172.30.30.30:5000/: x509: certificate signed by unknown authority
Copy to Clipboard Toggle word wrap

Make sure to provide the right one with the flag --certificate-authority.

As a workaround, the --force-insecure flag can be added instead. However, this is not recommended.

14.7. Hard pruning the registry
Copia collegamento

The OpenShift Container Registry can accumulate blobs that are not referenced by the OpenShift Container Platform cluster’s etcd. The basic pruning images procedure, therefore, is unable to operate on them. These are called orphaned blobs.

Orphaned blobs can occur from the following scenarios:

  • Manually deleting an image with oc delete image <sha256:image-id> command, which only removes the image from etcd, but not from the registry’s storage.
  • Pushing to the registry initiated by daemon failures, which causes some blobs to get uploaded, but the image manifest (which is uploaded as the very last component) does not. All unique image blobs become orphans.
  • OpenShift Container Platform refusing an image because of quota restrictions.
  • The standard image pruner deleting an image manifest, but is interrupted before it deletes the related blobs.
  • A bug in the registry pruner, which fails to remove the intended blobs, causing the image objects referencing them to be removed and the blobs becoming orphans.

Hard pruning the registry, a separate procedure from basic image pruning, allows cluster administrators to remove orphaned blobs. You should hard prune if you are running out of storage space in your OpenShift Container Registry and believe you have orphaned blobs.

This should be an infrequent operation and is necessary only when you have evidence that significant numbers of new orphans have been created. Otherwise, you can perform standard image pruning at regular intervals, for example, once a day (depending on the number of images being created).

Procedure

To hard prune orphaned blobs from the registry:

  1. Log in.

    Log in to the cluster with the CLI as kubeadmin or another privileged user that has access to the openshift-image-registry namespace.

  2. Run a basic image prune.

    Basic image pruning removes additional images that are no longer needed. The hard prune does not remove images on its own. It only removes blobs stored in the registry storage. Therefore, you should run this just before the hard prune.

  3. Switch the registry to read-only mode.

    If the registry is not running in read-only mode, any pushes happening at the same time as the prune will either:

    • fail and cause new orphans, or
    • succeed although the images cannot be pulled (because some of the referenced blobs were deleted).

    Pushes will not succeed until the registry is switched back to read-write mode. Therefore, the hard prune must be carefully scheduled.

    To switch the registry to read-only mode:

    1. In configs.imageregistry.operator.openshift.io/cluster, set spec.readOnly to true: 

      $ oc patch configs.imageregistry.operator.openshift.io/cluster -p '{"spec":{"readOnly":true}}' --type=merge
      Copy to Clipboard Toggle word wrap

  4. Add the system:image-pruner role.

    The service account used to run the registry instances requires additional permissions to list some resources.

    1. Get the service account name: 

      $ service_account=$(oc get -n openshift-image-registry \
    -o jsonpath='{.spec.template.spec.serviceAccountName}' deploy/image-registry)
      Copy to Clipboard Toggle word wrap

    2. Add the system:image-pruner cluster role to the service account: 

      $ oc adm policy add-cluster-role-to-user \
    system:image-pruner -z \
    ${service_account} -n openshift-image-registry
      Copy to Clipboard Toggle word wrap

  5. Optional: Run the pruner in dry-run mode.

    To see how many blobs would be removed, run the hard pruner in dry-run mode. No changes are actually made. The following example references an image registry pod called image-registry-3-vhndw: 

    $ oc -n openshift-image-registry exec pod/image-registry-3-vhndw -- /bin/sh -c '/usr/bin/dockerregistry -prune=check'
    Copy to Clipboard Toggle word wrap

    Alternatively, to get the exact paths for the prune candidates, increase the logging level: 

    $ oc -n openshift-image-registry exec pod/image-registry-3-vhndw -- /bin/sh -c 'REGISTRY_LOG_LEVEL=info /usr/bin/dockerregistry -prune=check'
    Copy to Clipboard Toggle word wrap

    Example output

    time="2017-06-22T11:50:25.066156047Z" level=info msg="start prune (dry-run mode)" distribution_version="v2.4.1+unknown" kubernetes_version=v1.6.1+$Format:%h$ openshift_version=unknown
time="2017-06-22T11:50:25.092257421Z" level=info msg="Would delete blob: sha256:00043a2a5e384f6b59ab17e2c3d3a3d0a7de01b2cabeb606243e468acc663fa5" go.version=go1.7.5 instance.id=b097121c-a864-4e0c-ad6c-cc25f8fdf5a6
time="2017-06-22T11:50:25.092395621Z" level=info msg="Would delete blob: sha256:0022d49612807cb348cabc562c072ef34d756adfe0100a61952cbcb87ee6578a" go.version=go1.7.5 instance.id=b097121c-a864-4e0c-ad6c-cc25f8fdf5a6
time="2017-06-22T11:50:25.092492183Z" level=info msg="Would delete blob: sha256:0029dd4228961086707e53b881e25eba0564fa80033fbbb2e27847a28d16a37c" go.version=go1.7.5 instance.id=b097121c-a864-4e0c-ad6c-cc25f8fdf5a6
time="2017-06-22T11:50:26.673946639Z" level=info msg="Would delete blob: sha256:ff7664dfc213d6cc60fd5c5f5bb00a7bf4a687e18e1df12d349a1d07b2cf7663" go.version=go1.7.5 instance.id=b097121c-a864-4e0c-ad6c-cc25f8fdf5a6
time="2017-06-22T11:50:26.674024531Z" level=info msg="Would delete blob: sha256:ff7a933178ccd931f4b5f40f9f19a65be5eeeec207e4fad2a5bafd28afbef57e" go.version=go1.7.5 instance.id=b097121c-a864-4e0c-ad6c-cc25f8fdf5a6
time="2017-06-22T11:50:26.674675469Z" level=info msg="Would delete blob: sha256:ff9b8956794b426cc80bb49a604a0b24a1553aae96b930c6919a6675db3d5e06" go.version=go1.7.5 instance.id=b097121c-a864-4e0c-ad6c-cc25f8fdf5a6
...
Would delete 13374 blobs
Would free up 2.835 GiB of disk space
Use -prune=delete to actually delete the data
    Copy to Clipboard Toggle word wrap

  6. Run the hard prune.

    Execute the following command inside one running instance of a image-registry pod to run the hard prune. The following example references an image registry pod called image-registry-3-vhndw: 

    $ oc -n openshift-image-registry exec pod/image-registry-3-vhndw -- /bin/sh -c '/usr/bin/dockerregistry -prune=delete'
    Copy to Clipboard Toggle word wrap

    Example output

    Deleted 13374 blobs
Freed up 2.835 GiB of disk space
    Copy to Clipboard Toggle word wrap

  7. Switch the registry back to read-write mode.

    After the prune is finished, the registry can be switched back to read-write mode. In configs.imageregistry.operator.openshift.io/cluster, set spec.readOnly to false: 

    $ oc patch configs.imageregistry.operator.openshift.io/cluster -p '{"spec":{"readOnly":false}}' --type=merge
    Copy to Clipboard Toggle word wrap

14.8. Pruning cron jobs
Copia collegamento

Cron jobs can perform pruning of successful jobs, but might not properly handle failed jobs. Therefore, the cluster administrator should perform regular cleanup of jobs manually. They should also restrict the access to cron jobs to a small group of trusted users and set appropriate quota to prevent the cron job from creating too many jobs and pods.

Torna in cima
Red Hat logoGithubredditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi. Esplora i nostri ultimi aggiornamenti.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita il Blog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

Theme

© 2025 Red Hat