Chapter 9. Migrating your applications

Procedure

1. Log in to the OpenShift Container Platform cluster on which you have installed MTC.

2. Obtain the MTC web console URL by entering the following command:

   $ oc get -n openshift-migration route/migration -o go-template='https://{{ .spec.host }}'

   The output resembles the following: https://migration-openshift-migration.apps.cluster.openshift.com.

3. Launch a browser and navigate to the MTC web console.

   Note

   If you try to access the MTC web console immediately after installing the Migration Toolkit for Containers Operator, the console might not load because the Operator is still configuring the cluster. Wait a few minutes and retry.

4. If you are using self-signed CA certificates, you will be prompted to accept the CA certificate of the source cluster API server. The web page guides you through the process of accepting the remaining certificates.
5. Log in with your OpenShift Container Platform username and password.

Procedure

1. Log in to the cluster.

2. Obtain the migration-controller service account token:

   $ oc create token migration-controller -n openshift-migration

   Example output

   eyJhbGciOiJSUzI1NiIsImtpZCI6IiJ9.eyJpc3MiOiJrdWJlcm5ldGVzL3NlcnZpY2VhY2NvdW50Iiwia3ViZXJuZXRlcy5pby9zZXJ2aWNlYWNjb3VudC9uYW1lc3BhY2UiOiJtaWciLCJrdWJlcm5ldGVzLmlvL3NlcnZpY2VhY2NvdW50L3NlY3JldC5uYW1lIjoibWlnLXRva2VuLWs4dDJyIiwia3ViZXJuZXRlcy5pby9zZXJ2aWNlYWNjb3VudC9zZXJ2aWNlLWFjY291bnQubmFtZSI6Im1pZyIsImt1YmVybmV0ZXMuaW8vc2VydmljZWFjY291bnQvc2VydmljZS1hY2NvdW50LnVpZCI6ImE1YjFiYWMwLWMxYmYtMTFlOS05Y2NiLTAyOWRmODYwYjMwOCIsInN1YiI6InN5c3RlbTpzZXJ2aWNlYWNjb3VudDptaWc6bWlnIn0.xqeeAINK7UXpdRqAtOj70qhBJPeMwmgLomV9iFxr5RoqUgKchZRG2J2rkqmPm6vr7K-cm7ibD1IBpdQJCcVDuoHYsFgV4mp9vgOfn9osSDp2TGikwNz4Az95e81xnjVUmzh-NjDsEpw71DH92iHV_xt2sTwtzftS49LpPW2LjrV0evtNBP_t_RfskdArt5VSv25eORl7zScqfe1CiMkcVbf2UqACQjo3LbkpfN26HAioO2oH0ECPiRzT0Xyh-KwFutJLS9Xgghyw-LD9kPKcE_xbbJ9Y4Rqajh7WdPYuB0Jd9DPVrslmzK-F6cgHHYoZEv0SvLQi-PO0rpDrcjOEQQ

3. Log in to the MTC web console.
4. In the MTC web console, click Clusters.
5. Click Add cluster.

6. Fill in the following fields:

   • Cluster name: The cluster name can contain lower-case letters (a-z) and numbers (0-9). It must not contain spaces or international characters.
   • URL: Specify the API server URL, for example, https://<www.example.com>:8443.
   • Service account token: Paste the migration-controller service account token.

   • Exposed route host to image registry: If you are using direct image migration, specify the exposed route to the image registry of the source cluster.

     To create the route, run the following command:

     • For OpenShift Container Platform 3:

       $ oc create route passthrough --service=docker-registry --port=5000 -n default

     • For OpenShift Container Platform 4:

       $ oc create route passthrough --service=image-registry --port=5000 -n openshift-image-registry

   • Azure cluster: You must select this option if you use Azure snapshots to copy your data.

     • Azure resource group: This field is displayed if Azure cluster is selected. Specify the Azure resource group.

       When an OpenShift Container Platform cluster is created on Microsoft Azure, an Azure Resource Group is created to contain all resources associated with the cluster. In the Azure CLI, you can display all resource groups by issuing the following command:

       $ az group list

       ResourceGroups associated with OpenShift Container Platform clusters are tagged, where sample-rg-name is the value you would extract and supply to the UI:

       {
         "id": "/subscriptions/...//resourceGroups/sample-rg-name",
         "location": "centralus",
         "name": "...",
         "properties": {
           "provisioningState": "Succeeded"
         },
         "tags": {
           "kubernetes.io_cluster.sample-ld57c": "owned",
           "openshift_creationDate": "2019-10-25T23:28:57.988208+00:00"
         },
         "type": "Microsoft.Resources/resourceGroups"
       },

       This information is also available from the Azure Portal in the Resource groups blade.

   • Require SSL verification: Optional: Select this option to verify the Secure Socket Layer (SSL) connection to the cluster.
   • CA bundle file: This field is displayed if Require SSL verification is selected. If you created a custom CA certificate bundle file for self-signed certificates, click Browse, select the CA bundle file, and upload it.

7. Click Add cluster.

   The cluster appears in the Clusters list.

Procedure

1. In the MTC web console, click Replication repositories.
2. Click Add repository.

3. Select a Storage provider type and fill in the following fields:

   • AWS for S3 providers, including AWS and MCG:

     • Replication repository name: Specify the replication repository name in the MTC web console.
     • S3 bucket name: Specify the name of the S3 bucket.
     • S3 bucket region: Specify the S3 bucket region. Required for AWS S3. Optional for some S3 providers. Check the product documentation of your S3 provider for expected values.
     • S3 endpoint: Specify the URL of the S3 service, not the bucket, for example, https://<s3-storage.apps.cluster.com>. Required for a generic S3 provider. You must use the https:// prefix.
     • S3 provider access key: Specify the <AWS_SECRET_ACCESS_KEY> for AWS or the S3 provider access key for MCG and other S3 providers.
     • S3 provider secret access key: Specify the <AWS_ACCESS_KEY_ID> for AWS or the S3 provider secret access key for MCG and other S3 providers.
     • Require SSL verification: Clear this checkbox if you are using a generic S3 provider.
     • If you created a custom CA certificate bundle for self-signed certificates, click Browse and browse to the Base64-encoded file.

   • GCP:

     • Replication repository name: Specify the replication repository name in the MTC web console.
     • GCP bucket name: Specify the name of the GCP bucket.
     • GCP credential JSON blob: Specify the string in the credentials-velero file.

   • Azure:

     • Replication repository name: Specify the replication repository name in the MTC web console.
     • Azure resource group: Specify the resource group of the Azure Blob storage.
     • Azure storage account name: Specify the Azure Blob storage account name.
     • Azure credentials - INI file contents: Specify the string in the credentials-velero file.
4. Click Add repository and wait for connection validation.

5. Click Close.

   The new repository appears in the Replication repositories list.

Procedure

1. In the MTC web console, click Migration plans.
2. Click Add migration plan.

3. Enter the Plan name.

   The migration plan name must not exceed 253 lower-case alphanumeric characters (a-z, 0-9) and must not contain spaces or underscores (_).

4. Select a Source cluster, a Target cluster, and a Repository.
5. Click Next.
6. Select the projects for migration.
7. Optional: Click the edit icon beside a project to change the target namespace.
8. Click Next.

9. Select a Migration type for each PV:

   • The Copy option copies the data from the PV of a source cluster to the replication repository and then restores the data on a newly created PV, with similar characteristics, in the target cluster.
   • The Move option unmounts a remote volume, for example, NFS, from the source cluster, creates a PV resource on the target cluster pointing to the remote volume, and then mounts the remote volume on the target cluster. Applications running on the target cluster use the same remote volume that the source cluster was using.
10. Click Next.

11. Select a Copy method for each PV:

    • Snapshot copy backs up and restores data using the cloud provider’s snapshot functionality. It is significantly faster than Filesystem copy.

    • Filesystem copy backs up the files on the source cluster and restores them on the target cluster.

      The file system copy method is required for direct volume migration.

12. You can select Verify copy to verify data migrated with Filesystem copy. Data is verified by generating a checksum for each source file and checking the checksum after restoration. Data verification significantly reduces performance.

13. Select a Target storage class.

    If you selected Filesystem copy, you can change the target storage class.

14. Click Next.

15. On the Migration options page, the Direct image migration option is selected if you specified an exposed image registry route for the source cluster. The Direct PV migration option is selected if you are migrating data with Filesystem copy.

    The direct migration options copy images and files directly from the source cluster to the target cluster. This option is much faster than copying images and files from the source cluster to the replication repository and then from the replication repository to the target cluster.

16. Click Next.

17. Optional: Click Add Hook to add a hook to the migration plan.

    A hook runs custom code. You can add up to four hooks to a single migration plan. Each hook runs during a different migration step.

    1. Enter the name of the hook to display in the web console.
    2. If the hook is an Ansible playbook, select Ansible playbook and click Browse to upload the playbook or paste the contents of the playbook in the field.
    3. Optional: Specify an Ansible runtime image if you are not using the default hook image.

    4. If the hook is not an Ansible playbook, select Custom container image and specify the image name and path.

       A custom container image can include Ansible playbooks.

    5. Select Source cluster or Target cluster.
    6. Enter the Service account name and the Service account namespace.

    7. Select the migration step for the hook:

       • preBackup: Before the application workload is backed up on the source cluster
       • postBackup: After the application workload is backed up on the source cluster
       • preRestore: Before the application workload is restored on the target cluster
       • postRestore: After the application workload is restored on the target cluster
    8. Click Add.

18. Click Finish.

    The migration plan is displayed in the Migration plans list.

Procedure

1. Log in to the MTC web console and click Migration plans.

2. Click the Options menu next to a migration plan and select one of the following options under Migration:

   • Stage copies data from the source cluster to the target cluster without stopping the application.

   • Cutover stops the transactions on the source cluster and moves the resources to the target cluster.

     Optional: In the Cutover migration dialog, you can clear the Halt transactions on the source cluster during migration checkbox.

   • State copies selected persistent volume claims (PVCs).

     Important

     Do not use state migration to migrate a namespace between clusters. Use stage or cutover migration instead.

     • Select one or more PVCs in the State migration dialog and click Migrate.

3. When the migration is complete, verify that the application migrated successfully in the OpenShift Container Platform web console:

   1. Click Home Projects.
   2. Click the migrated project to view its status.
   3. In the Routes section, click Location to verify that the application is functioning, if applicable.
   4. Click Workloads Pods to verify that the pods are running in the migrated namespace.
   5. Click Storage Persistent volumes to verify that the migrated persistent volumes are correctly provisioned.