SupportoConsoleSviluppatoriInizia una provaContatti

Questo contenuto non è disponibile nella lingua selezionata.

Chapter 13. Support

13.1. Support overview

You can collect data about your environment, monitor the health of your cluster and virtual machines (VMs), and troubleshoot OpenShift Virtualization resources with the following tools.

13.1.1. Web console

The OpenShift Container Platform web console displays resource usage, alerts, events, and trends for your cluster and for OpenShift Virtualization components and resources.

Table 13.1. Web console pages for monitoring and troubleshooting
PageDescription

Overview page

Cluster details, status, alerts, inventory, and resource usage

Virtualization Overview tab

OpenShift Virtualization resources, usage, alerts, and status

Virtualization Top consumers tab

Top consumers of CPU, memory, and storage

Virtualization Migrations tab

Progress of live migrations

VirtualMachines VirtualMachine VirtualMachine details Metrics tab

VM resource usage, storage, network, and migration

VirtualMachines VirtualMachine VirtualMachine details Events tab

List of VM events

VirtualMachines VirtualMachine VirtualMachine details Diagnostics tab

VM status conditions and volume snapshot status

13.1.2. Collecting data for Red Hat Support

When you submit a support case to Red Hat Support, it is helpful to provide debugging information. You can gather debugging information by performing the following steps:

Collecting data about your environment
Configure Prometheus and Alertmanager and collect must-gather data for OpenShift Container Platform and OpenShift Virtualization.
Collecting data about VMs
Collect must-gather data and memory dumps from VMs.
must-gather tool for OpenShift Virtualization
Configure and use the must-gather tool.

13.1.3. Troubleshooting

Troubleshoot OpenShift Virtualization components and VMs and resolve issues that trigger alerts in the web console.

Events
View important life-cycle information for VMs, namespaces, and resources.
Logs
View and configure logs for OpenShift Virtualization components and VMs.
Troubleshooting data volumes
Troubleshoot data volumes by analyzing conditions and events.

13.2. Collecting data for Red Hat Support

When you submit a support case to Red Hat Support, it is helpful to provide debugging information for OpenShift Container Platform and OpenShift Virtualization by using the following tools:

must-gather tool
The must-gather tool collects diagnostic information, including resource definitions and service logs.
Prometheus
Prometheus is a time-series database and a rule evaluation engine for metrics. Prometheus sends alerts to Alertmanager for processing.
Alertmanager
The Alertmanager service handles alerts received from Prometheus. The Alertmanager is also responsible for sending the alerts to external notification systems.

For information about the OpenShift Container Platform monitoring stack, see About OpenShift Container Platform monitoring.

13.2.1. Collecting data about your environment

Collecting data about your environment minimizes the time required to analyze and determine the root cause.

Prerequisites

Procedure

  1. Collect must-gather data for the cluster.
  2. Collect must-gather data for Red Hat OpenShift Data Foundation, if necessary.
  3. Collect must-gather data for OpenShift Virtualization.
  4. Collect Prometheus metrics for the cluster.

13.2.2. Collecting data about virtual machines

Collecting data about malfunctioning virtual machines (VMs) minimizes the time required to analyze and determine the root cause.

Prerequisites

Procedure

  1. Collect must-gather data for the VMs using the /usr/bin/gather script.
  2. Collect screenshots of VMs that have crashed before you restart them.
  3. Collect memory dumps from VMs before remediation attempts.
  4. Record factors that the malfunctioning VMs have in common. For example, the VMs have the same host or network.

13.2.3. Using the must-gather tool for OpenShift Virtualization

You can collect data about OpenShift Virtualization resources by running the must-gather command with the OpenShift Virtualization image.

The default data collection includes information about the following resources:

  • OpenShift Virtualization Operator namespaces, including child objects
  • OpenShift Virtualization custom resource definitions
  • Namespaces that contain virtual machines
  • Basic virtual machine definitions

Instance types information is not currently collected by default; you can, however, run a command to optionally collect it.

Procedure

  • Run the following command to collect data about OpenShift Virtualization: 

    $ oc adm must-gather \
  --image=registry.redhat.io/container-native-virtualization/cnv-must-gather-rhel9:v4.14.10 \
  -- /usr/bin/gather

13.2.3.1. must-gather tool options

You can specify a combination of scripts and environment variables for the following options:

  • Collecting detailed virtual machine (VM) information from a namespace
  • Collecting detailed information about specified VMs
  • Collecting image, image-stream, and image-stream-tags information
  • Limiting the maximum number of parallel processes used by the must-gather tool
13.2.3.1.1. Parameters

Environment variables

You can specify environment variables for a compatible script.

NS=<namespace_name>
Collect virtual machine information, including virt-launcher pod details, from the namespace that you specify. The VirtualMachine and VirtualMachineInstance CR data is collected for all namespaces.
VM=<vm_name>
Collect details about a particular virtual machine. To use this option, you must also specify a namespace by using the NS environment variable.
PROS=<number_of_processes>

Modify the maximum number of parallel processes that the must-gather tool uses. The default value is 5.

Important

Using too many parallel processes can cause performance issues. Increasing the maximum number of parallel processes is not recommended.

Scripts

Each script is compatible only with certain environment variable combinations.

/usr/bin/gather
Use the default must-gather script, which collects cluster data from all namespaces and includes only basic VM information. This script is compatible only with the PROS variable.
/usr/bin/gather --vms_details
Collect VM log files, VM definitions, control-plane logs, and namespaces that belong to OpenShift Virtualization resources. Specifying namespaces includes their child objects. If you use this parameter without specifying a namespace or VM, the must-gather tool collects this data for all VMs in the cluster. This script is compatible with all environment variables, but you must specify a namespace if you use the VM variable.
/usr/bin/gather --images
Collect image, image-stream, and image-stream-tags custom resource information. This script is compatible only with the PROS variable.
/usr/bin/gather --instancetypes
Collect instance types information. This information is not currently collected by default; you can, however, optionally collect it.
13.2.3.1.2. Usage and examples

Environment variables are optional. You can run a script by itself or with one or more compatible environment variables.

Table 13.2. Compatible parameters
ScriptCompatible environment variable

/usr/bin/gather

* PROS=<number_of_processes>

/usr/bin/gather --vms_details

* For a namespace: NS=<namespace_name>

* For a VM: VM=<vm_name> NS=<namespace_name>

* PROS=<number_of_processes>

/usr/bin/gather --images

* PROS=<number_of_processes>

Syntax

$ oc adm must-gather \
  --image=registry.redhat.io/container-native-virtualization/cnv-must-gather-rhel9:v4.14.10 \
  -- <environment_variable_1> <environment_variable_2> <script_name>

Default data collection parallel processes

By default, five processes run in parallel. 

$ oc adm must-gather \
  --image=registry.redhat.io/container-native-virtualization/cnv-must-gather-rhel9:v4.14.10 \
  -- PROS=5 /usr/bin/gather 1
1
You can modify the number of parallel processes by changing the default.

Detailed VM information

The following command collects detailed VM information for the my-vm VM in the mynamespace namespace: 

$ oc adm must-gather \
  --image=registry.redhat.io/container-native-virtualization/cnv-must-gather-rhel9:v4.14.10 \
  -- NS=mynamespace VM=my-vm /usr/bin/gather --vms_details 1
1
The NS environment variable is mandatory if you use the VM environment variable.

Image, image-stream, and image-stream-tags information

The following command collects image, image-stream, and image-stream-tags information from the cluster: 

$ oc adm must-gather \
  --image=registry.redhat.io/container-native-virtualization/cnv-must-gather-rhel9:v4.14.10 \
  /usr/bin/gather --images

Instance types information

The following command collects instance types information from the cluster: 

$ oc adm must-gather \
  --image=registry.redhat.io/container-native-virtualization/cnv-must-gather-rhel9:v4.14.10 \
  /usr/bin/gather --instancetypes

13.3. Troubleshooting

OpenShift Virtualization provides tools and logs for troubleshooting virtual machines and virtualization components.

You can troubleshoot OpenShift Virtualization components by using the tools provided in the web console or by using the oc CLI tool.

13.3.1. Events

OpenShift Container Platform events are records of important life-cycle information and are useful for monitoring and troubleshooting virtual machine, namespace, and resource issues.

  • VM events: Navigate to the Events tab of the VirtualMachine details page in the web console.

    Namespace events

    You can view namespace events by running the following command: 

    $ oc get events -n <namespace>

    See the list of events for details about specific events.

    Resource events

    You can view resource events by running the following command: 

    $ oc describe <resource> <resource_name>

13.3.2. Logs

You can review the following logs for troubleshooting:

13.3.2.1. Viewing virtual machine logs with the web console

You can view virtual machine logs with the OpenShift Container Platform web console.

Procedure

  1. Navigate to Virtualization VirtualMachines.
  2. Select a virtual machine to open the VirtualMachine details page.
  3. On the Details tab, click the pod name to open the Pod details page.
  4. Click the Logs tab to view the logs.

13.3.2.2. Viewing OpenShift Virtualization pod logs

You can view logs for OpenShift Virtualization pods by using the oc CLI tool.

You can configure the verbosity level of the logs by editing the HyperConverged custom resource (CR).

13.3.2.2.1. Viewing OpenShift Virtualization pod logs with the CLI

You can view logs for the OpenShift Virtualization pods by using the oc CLI tool.

Procedure

  1. View a list of pods in the OpenShift Virtualization namespace by running the following command: 

    $ oc get pods -n openshift-cnv

    Example 13.1. Example output

    NAME                               READY   STATUS    RESTARTS   AGE
disks-images-provider-7gqbc        1/1     Running   0          32m
disks-images-provider-vg4kx        1/1     Running   0          32m
virt-api-57fcc4497b-7qfmc          1/1     Running   0          31m
virt-api-57fcc4497b-tx9nc          1/1     Running   0          31m
virt-controller-76c784655f-7fp6m   1/1     Running   0          30m
virt-controller-76c784655f-f4pbd   1/1     Running   0          30m
virt-handler-2m86x                 1/1     Running   0          30m
virt-handler-9qs6z                 1/1     Running   0          30m
virt-operator-7ccfdbf65f-q5snk     1/1     Running   0          32m
virt-operator-7ccfdbf65f-vllz8     1/1     Running   0          32m

  2. View the pod log by running the following command: 

    $ oc logs -n openshift-cnv <pod_name>
    Note

    If a pod fails to start, you can use the --previous option to view logs from the last attempt.

    To monitor log output in real time, use the -f option.

    Example 13.2. Example output

    {"component":"virt-handler","level":"info","msg":"set verbosity to 2","pos":"virt-handler.go:453","timestamp":"2022-04-17T08:58:37.373695Z"}
{"component":"virt-handler","level":"info","msg":"set verbosity to 2","pos":"virt-handler.go:453","timestamp":"2022-04-17T08:58:37.373726Z"}
{"component":"virt-handler","level":"info","msg":"setting rate limiter to 5 QPS and 10 Burst","pos":"virt-handler.go:462","timestamp":"2022-04-17T08:58:37.373782Z"}
{"component":"virt-handler","level":"info","msg":"CPU features of a minimum baseline CPU model: map[apic:true clflush:true cmov:true cx16:true cx8:true de:true fpu:true fxsr:true lahf_lm:true lm:true mca:true mce:true mmx:true msr:true mtrr:true nx:true pae:true pat:true pge:true pni:true pse:true pse36:true sep:true sse:true sse2:true sse4.1:true ssse3:true syscall:true tsc:true]","pos":"cpu_plugin.go:96","timestamp":"2022-04-17T08:58:37.390221Z"}
{"component":"virt-handler","level":"warning","msg":"host model mode is expected to contain only one model","pos":"cpu_plugin.go:103","timestamp":"2022-04-17T08:58:37.390263Z"}
{"component":"virt-handler","level":"info","msg":"node-labeller is running","pos":"node_labeller.go:94","timestamp":"2022-04-17T08:58:37.391011Z"}
13.3.2.2.2. Configuring OpenShift Virtualization pod log verbosity

You can configure the verbosity level of OpenShift Virtualization pod logs by editing the HyperConverged custom resource (CR).

Procedure

  1. To set log verbosity for specific components, open the HyperConverged CR in your default text editor by running the following command: 

    $ oc edit hyperconverged kubevirt-hyperconverged -n openshift-cnv

  2. Set the log level for one or more components by editing the spec.logVerbosityConfig stanza. For example: 

    apiVersion: hco.kubevirt.io/v1beta1
kind: HyperConverged
metadata:
  name: kubevirt-hyperconverged
spec:
  logVerbosityConfig:
    kubevirt:
      virtAPI: 5 1
      virtController: 4
      virtHandler: 3
      virtLauncher: 2
      virtOperator: 6
    1
    The log verbosity value must be an integer in the range 1–9, where a higher number indicates a more detailed log. In this example, the virtAPI component logs are exposed if their priority level is 5 or higher.
  3. Apply your changes by saving and exiting the editor.
13.3.2.2.3. Common error messages

The following error messages might appear in OpenShift Virtualization logs:

ErrImagePull or ImagePullBackOff
Indicates an incorrect deployment configuration or problems with the images that are referenced.

13.3.2.3. Viewing aggregated OpenShift Virtualization logs with the LokiStack

You can view aggregated logs for OpenShift Virtualization pods and containers by using the LokiStack in the web console.

Prerequisites

  • You deployed the LokiStack.

Procedure

  1. Navigate to Observe Logs in the web console.
  2. Select application, for virt-launcher pod logs, or infrastructure, for OpenShift Virtualization control plane pods and containers, from the log type list.
  3. Click Show Query to display the query field.
  4. Enter the LogQL query in the query field and click Run Query to display the filtered logs.
13.3.2.3.1. OpenShift Virtualization LogQL queries

You can view and filter aggregated logs for OpenShift Virtualization components by running Loki Query Language (LogQL) queries on the Observe Logs page in the web console.

The default log type is infrastructure. The virt-launcher log type is application.

Optional: You can include or exclude strings or regular expressions by using line filter expressions.

Note

If the query matches a large number of logs, the query might time out.

Table 13.3. OpenShift Virtualization LogQL example queries
ComponentLogQL query

All 

{log_type=~".+"}|json
|kubernetes_labels_app_kubernetes_io_part_of="hyperconverged-cluster"

cdi-apiserver

cdi-deployment

cdi-operator 

{log_type=~".+"}|json
|kubernetes_labels_app_kubernetes_io_part_of="hyperconverged-cluster"
|kubernetes_labels_app_kubernetes_io_component="storage"

hco-operator 

{log_type=~".+"}|json
|kubernetes_labels_app_kubernetes_io_part_of="hyperconverged-cluster"
|kubernetes_labels_app_kubernetes_io_component="deployment"

kubemacpool 

{log_type=~".+"}|json
|kubernetes_labels_app_kubernetes_io_part_of="hyperconverged-cluster"
|kubernetes_labels_app_kubernetes_io_component="network"

virt-api

virt-controller

virt-handler

virt-operator 

{log_type=~".+"}|json
|kubernetes_labels_app_kubernetes_io_part_of="hyperconverged-cluster"
|kubernetes_labels_app_kubernetes_io_component="compute"

ssp-operator 

{log_type=~".+"}|json
|kubernetes_labels_app_kubernetes_io_part_of="hyperconverged-cluster"
|kubernetes_labels_app_kubernetes_io_component="schedule"

Container 

{log_type=~".+",kubernetes_container_name=~"<container>|<container>"} 1
|json|kubernetes_labels_app_kubernetes_io_part_of="hyperconverged-cluster"
1
Specify one or more containers separated by a pipe (|).

virt-launcher

You must select application from the log type list before running this query. 

{log_type=~".+", kubernetes_container_name="compute"}|json
|!= "custom-ga-command" 1
1
|!= "custom-ga-command" excludes libvirt logs that contain the string custom-ga-command. (BZ#2177684)

You can filter log lines to include or exclude strings or regular expressions by using line filter expressions.

Table 13.4. Line filter expressions
Line filter expressionDescription

|= "<string>"

Log line contains string

!= "<string>"

Log line does not contain string

|~ "<regex>"

Log line contains regular expression

!~ "<regex>"

Log line does not contain regular expression

Example line filter expression

{log_type=~".+"}|json
|kubernetes_labels_app_kubernetes_io_part_of="hyperconverged-cluster"
|= "error" != "timeout"

Additional resources for LokiStack and LogQL

13.3.3. Troubleshooting data volumes

You can check the Conditions and Events sections of the DataVolume object to analyze and resolve issues.

13.3.3.1. About data volume conditions and events

You can diagnose data volume issues by examining the output of the Conditions and Events sections generated by the command: 

$ oc describe dv <DataVolume>

The Conditions section displays the following Types:

  • Bound
  • Running
  • Ready

The Events section provides the following additional information:

  • Type of event
  • Reason for logging
  • Source of the event
  • Message containing additional diagnostic information.

The output from oc describe does not always contains Events.

An event is generated when the Status, Reason, or Message changes. Both conditions and events react to changes in the state of the data volume.

For example, if you misspell the URL during an import operation, the import generates a 404 message. That message change generates an event with a reason. The output in the Conditions section is updated as well.

13.3.3.2. Analyzing data volume conditions and events

By inspecting the Conditions and Events sections generated by the describe command, you determine the state of the data volume in relation to persistent volume claims (PVCs), and whether or not an operation is actively running or completed. You might also receive messages that offer specific details about the status of the data volume, and how it came to be in its current state.

There are many different combinations of conditions. Each must be evaluated in its unique context.

Examples of various combinations follow.

  • Bound - A successfully bound PVC displays in this example.

    Note that the Type is Bound, so the Status is True. If the PVC is not bound, the Status is False.

    When the PVC is bound, an event is generated stating that the PVC is bound. In this case, the Reason is Bound and Status is True. The Message indicates which PVC owns the data volume.

    Message, in the Events section, provides further details including how long the PVC has been bound (Age) and by what resource (From), in this case datavolume-controller:

    Example output

    Status:
  Conditions:
    Last Heart Beat Time:  2020-07-15T03:58:24Z
    Last Transition Time:  2020-07-15T03:58:24Z
    Message:               PVC win10-rootdisk Bound
    Reason:                Bound
    Status:                True
    Type:                  Bound
...
  Events:
    Type     Reason     Age    From                   Message
    ----     ------     ----   ----                   -------
    Normal   Bound      24s    datavolume-controller  PVC example-dv Bound

  • Running - In this case, note that Type is Running and Status is False, indicating that an event has occurred that caused an attempted operation to fail, changing the Status from True to False.

    However, note that Reason is Completed and the Message field indicates Import Complete.

    In the Events section, the Reason and Message contain additional troubleshooting information about the failed operation. In this example, the Message displays an inability to connect due to a 404, listed in the Events section’s first Warning.

    From this information, you conclude that an import operation was running, creating contention for other operations that are attempting to access the data volume:

    Example output

    Status:
  Conditions:
    Last Heart Beat Time:  2020-07-15T04:31:39Z
    Last Transition Time:  2020-07-15T04:31:39Z
    Message:               Import Complete
    Reason:                Completed
    Status:                False
    Type:                  Running
...
  Events:
    Type     Reason       Age                From                   Message
    ----     ------       ----               ----                   -------
    Warning  Error        12s (x2 over 14s)  datavolume-controller  Unable to connect
    to http data source: expected status code 200, got 404. Status: 404 Not Found

  • Ready – If Type is Ready and Status is True, then the data volume is ready to be used, as in the following example. If the data volume is not ready to be used, the Status is False:

    Example output

    Status:
  Conditions:
    Last Heart Beat Time: 2020-07-15T04:31:39Z
    Last Transition Time:  2020-07-15T04:31:39Z
    Status:                True
    Type:                  Ready

Red Hat logoGithubRedditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita ilBlog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

© 2024 Red Hat, Inc.