7.6. ネットワーク RHEL システムロールを使用したネットワークブリッジの設定

手順

1. ~/bridge-ethernet.yml などの Playbook ファイルを次の内容で作成します。

   ---
   - name: Configure the network
     hosts: managed-node-01.example.com
     tasks:
     - name: Configure a network bridge that uses two Ethernet ports
       include_role:
         name: rhel-system-roles.network
   
       vars:
         network_connections:
           # Define the bridge profile
           - name: bridge0
             type: bridge
             interface_name: bridge0
             ip:
               address:
                 - "192.0.2.1/24"
                 - "2001:db8:1::1/64"
               gateway4: 192.0.2.254
               gateway6: 2001:db8:1::fffe
               dns:
                 - 192.0.2.200
                 - 2001:db8:1::ffbb
               dns_search:
                 - example.com
             state: up
   
           # Add an Ethernet profile to the bridge
           - name: bridge0-port1
             interface_name: enp7s0
             type: ethernet
             controller: bridge0
             port_type: bridge
             state: up
   
           # Add a second Ethernet profile to the bridge
           - name: bridge0-port2
             interface_name: enp8s0
             type: ethernet
             controller: bridge0
             port_type: bridge
             state: up

   Copy to Clipboard Toggle word wrap

2. Playbook を実行します。

   # ansible-playbook ~/bridge-ethernet.yml

   Copy to Clipboard Toggle word wrap