이 콘텐츠는 선택한 언어로 제공되지 않습니다.

Chapter 6. Installing on Azure

6.1. Preparing to install on Azure

6.1.1. Prerequisites

You reviewed details about the OpenShift Container Platform installation and update processes.
You read the documentation on selecting a cluster installation method and preparing it for users.

6.1.2. Requirements for installing OpenShift Container Platform on Azure

Before installing OpenShift Container Platform on Microsoft Azure, you must configure an Azure account. See Configuring an Azure account for details about account configuration, account limits, public DNS zone configuration, required roles, creating service principals, and supported Azure regions.

If the cloud identity and access management (IAM) APIs are not accessible in your environment, or if you do not want to store an administrator-level credential secret in the kube-system namespace, see Manually creating IAM for Azure for other options.

6.1.3. Choosing a method to install OpenShift Container Platform on Azure

You can install OpenShift Container Platform on installer-provisioned or user-provisioned infrastructure. The default installation type uses installer-provisioned infrastructure, where the installation program provisions the underlying infrastructure for the cluster. You can also install OpenShift Container Platform on infrastructure that you provision. If you do not use infrastructure that the installation program provisions, you must manage and maintain the cluster resources yourself.

See Installation process for more information about installer-provisioned and user-provisioned installation processes.

6.1.3.1. Installing a cluster on installer-provisioned infrastructure

You can install a cluster on Azure infrastructure that is provisioned by the OpenShift Container Platform installation program, by using one of the following methods:

Installing a cluster quickly on Azure: You can install OpenShift Container Platform on Azure infrastructure that is provisioned by the OpenShift Container Platform installation program. You can install a cluster quickly by using the default configuration options.
Installing a customized cluster on Azure: You can install a customized cluster on Azure infrastructure that the installation program provisions. The installation program allows for some customization to be applied at the installation stage. Many other customization options are available post-installation.
Installing a cluster on Azure with network customizations: You can customize your OpenShift Container Platform network configuration during installation, so that your cluster can coexist with your existing IP address allocations and adhere to your network requirements.
Installing a cluster on Azure into an existing VNet: You can install OpenShift Container Platform on an existing Azure Virtual Network (VNet) on Azure. You can use this installation method if you have constraints set by the guidelines of your company, such as limits when creating new accounts or infrastructure.
Installing a private cluster on Azure: You can install a private cluster into an existing Azure Virtual Network (VNet) on Azure. You can use this method to deploy OpenShift Container Platform on an internal network that is not visible to the internet.
Installing a cluster on Azure into a government region: OpenShift Container Platform can be deployed into Microsoft Azure Government (MAG) regions that are specifically designed for US government agencies at the federal, state, and local level, as well as contractors, educational institutions, and other US customers that must run sensitive workloads on Azure.

6.1.3.2. Installing a cluster on user-provisioned infrastructure

You can install a cluster on Azure infrastructure that you provision, by using the following method:

Installing a cluster on Azure using ARM templates: You can install OpenShift Container Platform on Azure by using infrastructure that you provide. You can use the provided Azure Resource Manager (ARM) templates to assist with an installation.

6.1.4. Next steps

Configuring an Azure account

6.2. Configuring an Azure account

Before you can install OpenShift Container Platform, you must configure a Microsoft Azure account.

Important

All Azure resources that are available through public endpoints are subject to resource name restrictions, and you cannot create resources that use certain terms. For a list of terms that Azure restricts, see Resolve reserved resource name errors in the Azure documentation.

6.2.1. Azure account limits

The OpenShift Container Platform cluster uses a number of Microsoft Azure components, and the default Azure subscription and service limits, quotas, and constraints affect your ability to install OpenShift Container Platform clusters.

Important

Default limits vary by offer category types, such as Free Trial and Pay-As-You-Go, and by series, such as Dv2, F, and G. For example, the default for Enterprise Agreement subscriptions is 350 cores.

Check the limits for your subscription type and if necessary, increase quota limits for your account before you install a default cluster on Azure.

The following table summarizes the Azure components whose limits can impact your ability to install and run OpenShift Container Platform clusters.

Component Number of components required by default Default Azure limit Description

vCPU

20 per region

A default cluster requires 40 vCPUs, so you must increase the account limit.

By default, each cluster creates the following instances:

One bootstrap machine, which is removed after installation
Three control plane machines
Three compute machines

Because the bootstrap machine uses Standard_D4s_v3 machines, which use 4 vCPUs, the control plane machines use Standard_D8s_v3 virtual machines, which use 8 vCPUs, and the worker machines use Standard_D4s_v3 virtual machines, which use 4 vCPUs, a default cluster requires 40 vCPUs. The bootstrap node VM, which uses 4 vCPUs, is used only during installation.

To deploy more worker nodes, enable autoscaling, deploy large workloads, or use a different instance type, you must further increase the vCPU limit for your account to ensure that your cluster can deploy the machines that you require.

OS Disk

Each cluster machine must have a minimum of 100 GB of storage and 300 IOPS. While these are the minimum supported values, faster storage is recommended for production clusters and clusters with intensive workloads. For more information about optimizing storage for performance, see the page titled "Optimizing storage" in the "Scalability and performance" section.

VNet

1000 per region

Each default cluster requires one Virtual Network (VNet), which contains two subnets.

Network interfaces

65,536 per region

Each default cluster requires seven network interfaces. If you create more machines or your deployed workloads create load balancers, your cluster uses more network interfaces.

Network security groups

5000

Each cluster creates network security groups for each subnet in the VNet. The default cluster creates network security groups for the control plane and for the compute node subnets:

`controlplane`	Allows the control plane machines to be reached on port 6443 from anywhere
`node`	Allows worker nodes to be reached from the internet on ports 80 and 443

Network load balancers

1000 per region

Each cluster creates the following load balancers:

`default`	Public IP address that load balances requests to ports 80 and 443 across worker machines
`internal`	Private IP address that load balances requests to ports 6443 and 22623 across control plane machines
`external`	Public IP address that load balances requests to port 6443 across control plane machines

If your applications create more Kubernetes LoadBalancer service objects, your cluster uses more load balancers.

Public IP addresses

Each of the two public load balancers uses a public IP address. The bootstrap machine also uses a public IP address so that you can SSH into the machine to troubleshoot issues during installation. The IP address for the bootstrap node is used only during installation.

Private IP addresses

The internal load balancer, each of the three control plane machines, and each of the three worker machines each use a private IP address.

Spot VM vCPUs (optional)

If you configure spot VMs, your cluster must have two spot VM vCPUs for every compute node.

20 per region

This is an optional component. To use spot VMs, you must increase the Azure default limit to at least twice the number of compute nodes in your cluster.

Note

Using spot VMs for control plane nodes is not recommended.

Additional resources

Optimizing storage.

6.2.2. Configuring a public DNS zone in Azure

To install OpenShift Container Platform, the Microsoft Azure account you use must have a dedicated public hosted DNS zone in your account. This zone must be authoritative for the domain. This service provides cluster DNS resolution and name lookup for external connections to the cluster.

Procedure

Identify your domain, or subdomain, and registrar. You can transfer an existing domain and registrar or obtain a new one through Azure or another source.
Note
For more information about purchasing domains through Azure, see Buy a custom domain name for Azure App Service in the Azure documentation.
If you are using an existing domain and registrar, migrate its DNS to Azure. See Migrate an active DNS name to Azure App Service in the Azure documentation.
Configure DNS for your domain. Follow the steps in the Tutorial: Host your domain in Azure DNS in the Azure documentation to create a public hosted zone for your domain or subdomain, extract the new authoritative name servers, and update the registrar records for the name servers that your domain uses.
Use an appropriate root domain, such as openshiftcorp.com, or subdomain, such as clusters.openshiftcorp.com.
If you use a subdomain, follow your company’s procedures to add its delegation records to the parent domain.

6.2.3. Increasing Azure account limits

To increase an account limit, file a support request on the Azure portal.

Note

You can increase only one type of quota per support request.

Procedure

From the Azure portal, click Help + support in the lower left corner.
Click New support request and then select the required values:
1. From the Issue type list, select Service and subscription limits (quotas).
2. From the Subscription list, select the subscription to modify.
3. From the Quota type list, select the quota to increase. For example, select Compute-VM (cores-vCPUs) subscription limit increases to increase the number of vCPUs, which is required to install a cluster.
4. Click Next: Solutions.
On the Problem Details page, provide the required information for your quota increase:
1. Click Provide details and provide the required details in the Quota details window.
2. In the SUPPORT METHOD and CONTACT INFO sections, provide the issue severity and your contact details.
Click Next: Review + create and then click Create.

6.2.4. Required Azure roles

OpenShift Container Platform needs a service principal so it can manage Microsoft Azure resources. Before you can create a service principal, review the following information:

Your Azure account subscription must have the following roles:

User Access Administrator
Contributor

Your Azure Active Directory (AD) must have the following permission:

"microsoft.directory/servicePrincipals/createAsOwner"

To set roles on the Azure portal, see the Manage access to Azure resources using RBAC and the Azure portal in the Azure documentation.

6.2.5. Creating a service principal

Because OpenShift Container Platform and its installation program create Microsoft Azure resources by using the Azure Resource Manager, you must create a service principal to represent it.

Prerequisites

Install or update the Azure CLI.
Your Azure account has the required roles for the subscription that you use.

Procedure

If your Azure account uses subscriptions, ensure that you are using the right subscription:

View the list of available accounts and record the tenantId value for the subscription you want to use for your cluster:

$ az account list --refresh

Example output

[
  {
    "cloudName": "AzureCloud",
    "id": "9bab1460-96d5-40b3-a78e-17b15e978a80",
    "isDefault": true,
    "name": "Subscription Name",
    "state": "Enabled",
    "tenantId": "6057c7e9-b3ae-489d-a54e-de3f6bf6a8ee",
    "user": {
      "name": "you@example.com",
      "type": "user"
    }
  }
]

View your active account details and confirm that the tenantId value matches the subscription you want to use:

$ az account show

Example output

{
  "environmentName": "AzureCloud",
  "id": "9bab1460-96d5-40b3-a78e-17b15e978a80",
  "isDefault": true,
  "name": "Subscription Name",
  "state": "Enabled",
  "tenantId": "6057c7e9-b3ae-489d-a54e-de3f6bf6a8ee", 1
  "user": {
    "name": "you@example.com",
    "type": "user"
  }
}

1: Ensure that the value of the tenantId parameter is the correct subscription ID.

If you are not using the right subscription, change the active subscription:
```
$ az account set -s <subscription_id> 1
```
1
Specify the subscription ID.

Verify the subscription ID update:

$ az account show

Example output

{
  "environmentName": "AzureCloud",
  "id": "33212d16-bdf6-45cb-b038-f6565b61edda",
  "isDefault": true,
  "name": "Subscription Name",
  "state": "Enabled",
  "tenantId": "8049c7e9-c3de-762d-a54e-dc3f6be6a7ee",
  "user": {
    "name": "you@example.com",
    "type": "user"
  }
}

Record the tenantId and id parameter values from the output. You need these values during the OpenShift Container Platform installation.

Create the service principal for your account:

$ az ad sp create-for-rbac --role Contributor --name <service_principal> \ 1
  --scopes /subscriptions/<subscription_id> 2
  --years <years> 3

1: Specify the service principal name.
2: Specify the subscription ID.
3: Specify the number of years. By default, a service principal expires in one year. By using the --years option you can extend the validity of your service principal.

Example output

Creating 'Contributor' role assignment under scope '/subscriptions/<subscription_id>'
The output includes credentials that you must protect. Be sure that you do not
include these credentials in your code or check the credentials into your source
control. For more information, see https://aka.ms/azadsp-cli
{
  "appId": "ac461d78-bf4b-4387-ad16-7e32e328aec6",
  "displayName": <service_principal>",
  "password": "00000000-0000-0000-0000-000000000000",
  "tenantId": "8049c7e9-c3de-762d-a54e-dc3f6be6a7ee"
}

Record the values of the appId and password parameters from the previous output. You need these values during OpenShift Container Platform installation.

Assign the User Access Administrator role by running the following command:

$ az role assignment create --role "User Access Administrator" \
  --assignee-object-id $(az ad sp show --id <appId> --query id -o tsv) 1

1: Specify the appId parameter value for your service principal.

Additional resources

For more information about CCO modes, see About the Cloud Credential Operator.

6.2.6. Supported Azure Marketplace regions

Installing a cluster using the Azure Marketplace image is available to customers who purchase the offer in North America and EMEA.

While the offer must be purchased in North America or EMEA, you can deploy the cluster to any of the Azure public partitions that OpenShift Container Platform supports.

Note

Deploying a cluster using the Azure Marketplace image is not supported for the Azure Government regions.

6.2.7. Supported Azure regions

The installation program dynamically generates the list of available Microsoft Azure regions based on your subscription.

Supported Azure public regions

australiacentral (Australia Central)
australiaeast (Australia East)
australiasoutheast (Australia South East)
brazilsouth (Brazil South)
canadacentral (Canada Central)
canadaeast (Canada East)
centralindia (Central India)
centralus (Central US)
eastasia (East Asia)
eastus (East US)
eastus2 (East US 2)
francecentral (France Central)
germanywestcentral (Germany West Central)
israelcentral (Israel Central)
italynorth (Italy North)
japaneast (Japan East)
japanwest (Japan West)
koreacentral (Korea Central)
koreasouth (Korea South)
northcentralus (North Central US)
northeurope (North Europe)
norwayeast (Norway East)
polandcentral (Poland Central)
qatarcentral (Qatar Central)
southafricanorth (South Africa North)
southcentralus (South Central US)
southeastasia (Southeast Asia)
southindia (South India)
swedencentral (Sweden Central)
switzerlandnorth (Switzerland North)
uaenorth (UAE North)
uksouth (UK South)
ukwest (UK West)
westcentralus (West Central US)
westeurope (West Europe)
westindia (West India)
westus (West US)
westus2 (West US 2)
westus3 (West US 3)

Supported Azure Government regions

Support for the following Microsoft Azure Government (MAG) regions was added in OpenShift Container Platform version 4.6:

usgovtexas (US Gov Texas)
usgovvirginia (US Gov Virginia)

You can reference all available MAG regions in the Azure documentation. Other provided MAG regions are expected to work with OpenShift Container Platform, but have not been tested.

6.2.8. Next steps

Install an OpenShift Container Platform cluster on Azure. You can install a customized cluster or quickly install a cluster with default options.

6.3. Manually creating IAM for Azure

In environments where the cloud identity and access management (IAM) APIs are not reachable, or the administrator prefers not to store an administrator-level credential secret in the cluster kube-system namespace, you can put the Cloud Credential Operator (CCO) into manual mode before you install the cluster.

6.3.1. Alternatives to storing administrator-level secrets in the kube-system project

The Cloud Credential Operator (CCO) manages cloud provider credentials as Kubernetes custom resource definitions (CRDs). You can configure the CCO to suit the security requirements of your organization by setting different values for the credentialsMode parameter in the install-config.yaml file.

If you prefer not to store an administrator-level credential secret in the cluster kube-system project, you can set the credentialsMode parameter for the CCO to Manual when installing OpenShift Container Platform and manage your cloud credentials manually.

Using manual mode allows each cluster component to have only the permissions it requires, without storing an administrator-level credential in the cluster. You can also use this mode if your environment does not have connectivity to the cloud provider public IAM endpoint. However, you must manually reconcile permissions with new release images for every upgrade. You must also manually supply credentials for every component that requests them.

Additional resources

For a detailed description of all available CCO credential modes and their supported platforms, see About the Cloud Credential Operator.

6.3.2. Manually create IAM

The Cloud Credential Operator (CCO) can be put into manual mode prior to installation in environments where the cloud identity and access management (IAM) APIs are not reachable, or the administrator prefers not to store an administrator-level credential secret in the cluster kube-system namespace.

Procedure

Change to the directory that contains the installation program and create the install-config.yaml file by running the following command:
```
$ openshift-install create install-config --dir <installation_directory>
```
where <installation_directory> is the directory in which the installation program creates files.
Edit the install-config.yaml configuration file so that it contains the credentialsMode parameter set to Manual.
Example install-config.yaml configuration file
```
apiVersion: v1
baseDomain: cluster1.example.com
credentialsMode: Manual 1
compute:
- architecture: amd64
  hyperthreading: Enabled
...
```
1
This line is added to set the credentialsMode parameter to Manual.
Generate the manifests by running the following command from the directory that contains the installation program:
```
$ openshift-install create manifests --dir <installation_directory>
```
where <installation_directory> is the directory in which the installation program creates files.
From the directory that contains the installation program, obtain details of the OpenShift Container Platform release image that your openshift-install binary is built to use by running the following command:
```
$ openshift-install version
```
Example output
```
release image quay.io/openshift-release-dev/ocp-release:4.y.z-x86_64
```

Locate all CredentialsRequest objects in this release image that target the cloud you are deploying on by running the following command:

$ oc adm release extract quay.io/openshift-release-dev/ocp-release:4.y.z-x86_64 \
  --credentials-requests \
  --cloud=azure

This command creates a YAML file for each CredentialsRequest object.

Sample CredentialsRequest object

apiVersion: cloudcredential.openshift.io/v1
kind: CredentialsRequest
metadata:
  name: <component-credentials-request>
  namespace: openshift-cloud-credential-operator
  ...
spec:
  providerSpec:
    apiVersion: cloudcredential.openshift.io/v1
    kind: AzureProviderSpec
    roleBindings:
    - role: Contributor
  ...

Create YAML files for secrets in the openshift-install manifests directory that you generated previously. The secrets must be stored using the namespace and secret name defined in the spec.secretRef for each CredentialsRequest object.

Sample CredentialsRequest object with secrets

apiVersion: cloudcredential.openshift.io/v1
kind: CredentialsRequest
metadata:
  name: <component-credentials-request>
  namespace: openshift-cloud-credential-operator
  ...
spec:
  providerSpec:
    apiVersion: cloudcredential.openshift.io/v1
    kind: AzureProviderSpec
    roleBindings:
    - role: Contributor
      ...
  secretRef:
    name: <component-secret>
    namespace: <component-namespace>
  ...

Sample Secret object

apiVersion: v1
kind: Secret
metadata:
  name: <component-secret>
  namespace: <component-namespace>
data:
  azure_subscription_id: <base64_encoded_azure_subscription_id>
  azure_client_id: <base64_encoded_azure_client_id>
  azure_client_secret: <base64_encoded_azure_client_secret>
  azure_tenant_id: <base64_encoded_azure_tenant_id>
  azure_resource_prefix: <base64_encoded_azure_resource_prefix>
  azure_resourcegroup: <base64_encoded_azure_resourcegroup>
  azure_region: <base64_encoded_azure_region>

Important

The release image includes CredentialsRequest objects for Technology Preview features that are enabled by the TechPreviewNoUpgrade feature set. You can identify these objects by their use of the release.openshift.io/feature-gate: TechPreviewNoUpgrade annotation.

If you are not using any of these features, do not create secrets for these objects. Creating secrets for Technology Preview features that you are not using can cause the installation to fail.
If you are using any of these features, you must create secrets for the corresponding objects.

To find CredentialsRequest objects with the TechPreviewNoUpgrade annotation, run the following command:

$ grep "release.openshift.io/feature-gate" *

Example output

0000_30_capi-operator_00_credentials-request.yaml:  release.openshift.io/feature-gate: TechPreviewNoUpgrade

From the directory that contains the installation program, proceed with your cluster creation:
```
$ openshift-install create cluster --dir <installation_directory>
```
Important
Before upgrading a cluster that uses manually maintained credentials, you must ensure that the CCO is in an upgradeable state.

Additional resources

6.3.3. Next steps

Install an OpenShift Container Platform cluster:
- Installing a cluster quickly on Azure with default options on installer-provisioned infrastructure
- Install a cluster with cloud customizations on installer-provisioned infrastructure
- Install a cluster with network customizations on installer-provisioned infrastructure

6.4. Enabling user-managed encryption for Azure

In OpenShift Container Platform version 4.11, you can install a cluster with a user-managed encryption key in Azure. To enable this feature, you can prepare an Azure DiskEncryptionSet before installation, modify the install-config.yaml file, and then perform post-installation steps.

6.4.1. Preparing an Azure Disk Encryption Set

The OpenShift Container Platform installer can use an existing Disk Encryption Set with a user-managed key. To enable this feature, you can create a Disk Encryption Set in Azure and provide the key to the installer.

Procedure

Set the following environment variables for the Azure resource group by running the following command:
```
$ export RESOURCEGROUP="<resource_group>" \1
    LOCATION="<location>" 2
```
1
Specifies the name of the Azure resource group where you will create the Disk Encryption Set and encryption key. To avoid losing access to your keys after destroying the cluster, you should create the Disk Encryption Set in a different resource group than the resource group where you install the cluster.
2
Specifies the Azure location where you will create the resource group.
Set the following environment variables for the Azure Key Vault and Disk Encryption Set by running the following command:
```
$ export KEYVAULT_NAME="<keyvault_name>" \1
    KEYVAULT_KEY_NAME="<keyvault_key_name>" \2
    DISK_ENCRYPTION_SET_NAME="<disk_encryption_set_name>" 3
```
1
Specifies the name of the Azure Key Vault you will create.
2
Specifies the name of the encryption key you will create.
3
Specifies the name of the disk encryption set you will create.
Set the environment variable for the ID of your Azure Service Principal by running the following command:
```
$ export CLUSTER_SP_ID="<service_principal_id>" 1
```
1
Specifies the ID of the service principal you will use for this installation.

Enable host-level encryption in Azure by running the following commands:

$ az feature register --namespace "Microsoft.Compute" --name "EncryptionAtHost"

$ az feature show --namespace Microsoft.Compute --name EncryptionAtHost

$ az provider register -n Microsoft.Compute

Create an Azure Resource Group to hold the disk encryption set and associated resources by running the following command:
```
$ az group create --name $RESOURCEGROUP --location $LOCATION
```

Create an Azure key vault by running the following command:

$ az keyvault create -n $KEYVAULT_NAME -g $RESOURCEGROUP -l $LOCATION \
    --enable-purge-protection true

Create an encryption key in the key vault by running the following command:

$ az keyvault key create --vault-name $KEYVAULT_NAME -n $KEYVAULT_KEY_NAME \
    --protection software

Capture the ID of the key vault by running the following command:

$ KEYVAULT_ID=$(az keyvault show --name $KEYVAULT_NAME --query "[id]" -o tsv)

Capture the key URL in the key vault by running the following command:

$ KEYVAULT_KEY_URL=$(az keyvault key show --vault-name $KEYVAULT_NAME --name \
    $KEYVAULT_KEY_NAME --query "[key.kid]" -o tsv)

Create a disk encryption set by running the following command:

$ az disk-encryption-set create -n $DISK_ENCRYPTION_SET_NAME -l $LOCATION -g \
    $RESOURCEGROUP --source-vault $KEYVAULT_ID --key-url $KEYVAULT_KEY_URL

Grant the DiskEncryptionSet resource access to the key vault by running the following commands:

$ DES_IDENTITY=$(az disk-encryption-set show -n $DISK_ENCRYPTION_SET_NAME -g \
    $RESOURCEGROUP --query "[identity.principalId]" -o tsv)

$ az keyvault set-policy -n $KEYVAULT_NAME -g $RESOURCEGROUP --object-id \
    $DES_IDENTITY --key-permissions wrapkey unwrapkey get

Grant the Azure Service Principal permission to read the DiskEncryptionSet by running the following commands:
```
$ DES_RESOURCE_ID=$(az disk-encryption-set show -n $DISK_ENCRYPTION_SET_NAME -g \
    $RESOURCEGROUP --query "[id]" -o tsv)
```
```
$ az role assignment create --assignee $CLUSTER_SP_ID --role "<reader_role>" \1
    --scope $DES_RESOURCE_ID -o jsonc
```
1
Specifies an Azure role with read permissions to the disk encryption set. You can use the Owner role or a custom role with the necessary permissions.

6.4.2. Next steps

Install an OpenShift Container Platform cluster:

6.5. Installing a cluster quickly on Azure

In OpenShift Container Platform version 4.11, you can install a cluster on Microsoft Azure that uses the default configuration options.

6.5.1. Prerequisites

You reviewed details about the OpenShift Container Platform installation and update processes.
You read the documentation on selecting a cluster installation method and preparing it for users.
You configured an Azure account to host the cluster and determined the tested and validated region to deploy the cluster to.
If you use a firewall, you configured it to allow the sites that your cluster requires access to.
If the cloud identity and access management (IAM) APIs are not accessible in your environment, or if you do not want to store an administrator-level credential secret in the kube-system namespace, you can manually create and maintain IAM credentials.

6.5.2. Internet access for OpenShift Container Platform

In OpenShift Container Platform 4.11, you require access to the internet to install your cluster.

You must have internet access to:

Access OpenShift Cluster Manager Hybrid Cloud Console to download the installation program and perform subscription management. If the cluster has internet access and you do not disable Telemetry, that service automatically entitles your cluster.
Access Quay.io to obtain the packages that are required to install your cluster.
Obtain the packages that are required to perform cluster updates.

Important

If your cluster cannot have direct internet access, you can perform a restricted network installation on some types of infrastructure that you provision. During that process, you download the required content and use it to populate a mirror registry with the installation packages. With some installation types, the environment that you install your cluster in will not require internet access. Before you update the cluster, you update the content of the mirror registry.

6.5.3. Generating a key pair for cluster node SSH access

During an OpenShift Container Platform installation, you can provide an SSH public key to the installation program. The key is passed to the Red Hat Enterprise Linux CoreOS (RHCOS) nodes through their Ignition config files and is used to authenticate SSH access to the nodes. The key is added to the ~/.ssh/authorized_keys list for the core user on each node, which enables password-less authentication.

After the key is passed to the nodes, you can use the key pair to SSH in to the RHCOS nodes as the user core. To access the nodes through SSH, the private key identity must be managed by SSH for your local user.

If you want to SSH in to your cluster nodes to perform installation debugging or disaster recovery, you must provide the SSH public key during the installation process. The ./openshift-install gather command also requires the SSH public key to be in place on the cluster nodes.

Important

Do not skip this procedure in production environments, where disaster recovery and debugging is required.

Note

You must use a local key, not one that you configured with platform-specific approaches such as AWS key pairs.

Procedure

If you do not have an existing SSH key pair on your local machine to use for authentication onto your cluster nodes, create one. For example, on a computer that uses a Linux operating system, run the following command:
```
$ ssh-keygen -t ed25519 -N '' -f <path>/<file_name> 1
```
1
Specify the path and file name, such as ~/.ssh/id_ed25519, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.
Note
If you plan to install an OpenShift Container Platform cluster that uses FIPS validated or Modules In Process cryptographic libraries on the x86_64 architecture, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.
View the public SSH key:
```
$ cat <path>/<file_name>.pub
```
For example, run the following to view the ~/.ssh/id_ed25519.pub public key:
```
$ cat ~/.ssh/id_ed25519.pub
```
Add the SSH private key identity to the SSH agent for your local user, if it has not already been added. SSH agent management of the key is required for password-less SSH authentication onto your cluster nodes, or if you want to use the ./openshift-install gather command.
Note
On some distributions, default SSH private key identities such as ~/.ssh/id_rsa and ~/.ssh/id_dsa are managed automatically.
1. If the ssh-agent process is not already running for your local user, start it as a background task:
```
$ eval "$(ssh-agent -s)"
```
  Example output
```
Agent pid 31874
```
  Note
  If your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.
Add your SSH private key to the ssh-agent:
```
$ ssh-add <path>/<file_name> 1
```
1
Specify the path and file name for your SSH private key, such as ~/.ssh/id_ed25519
Example output
```
Identity added: /home/<you>/<path>/<file_name> (<computer_name>)
```

Next steps

When you install OpenShift Container Platform, provide the SSH public key to the installation program.

6.5.4. Obtaining the installation program

Before you install OpenShift Container Platform, download the installation file on a local computer.

Prerequisites

You have a computer that runs Linux or macOS, with 500 MB of local disk space.

Procedure

Access the Infrastructure Provider page on the OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.
Select your infrastructure provider.
Navigate to the page for your installation type, download the installation program that corresponds with your host operating system and architecture, and place the file in the directory where you will store the installation configuration files.
Important
The installation program creates several files on the computer that you use to install your cluster. You must keep the installation program and the files that the installation program creates after you finish installing the cluster. Both files are required to delete the cluster.
Important
Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. To remove your cluster, complete the OpenShift Container Platform uninstallation procedures for your specific cloud provider.
Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:
```
$ tar -xvf openshift-install-linux.tar.gz
```
Download your installation pull secret from the Red Hat OpenShift Cluster Manager. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

6.5.5. Deploying the cluster

You can install OpenShift Container Platform on a compatible cloud platform.

Important

You can run the create cluster command of the installation program only once, during initial installation.

Prerequisites

Configure an account with the cloud platform that hosts your cluster.
Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.

Procedure

Change to the directory that contains the installation program and initialize the cluster deployment:
```
$ ./openshift-install create cluster --dir <installation_directory> \ 1
    --log-level=info 2
```
1
For <installation_directory>, specify the directory name to store the files that the installation program creates.
2
To view different installation details, specify warn, debug, or error instead of info.
When specifying the directory:
- Verify that the directory has the execute permission. This permission is required to run Terraform binaries under the installation directory.
- Use an empty directory. Some installation assets, such as bootstrap X.509 certificates, have short expiration intervals, therefore you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.
Provide values at the prompts:
1. Optional: Select an SSH key to use to access your cluster machines.
  Note
  For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.
2. Select azure as the platform to target.
3. If the installation program cannot locate the osServicePrincipal.json configuration file, which contains Microsoft Azure profile information, in the ~/.azure/ directory on your computer, the installer prompts you to specify the following Azure parameter values for your subscription and service principal.
  - azure subscription id: The subscription ID to use for the cluster. Specify the id value in your account output.
  - azure tenant id: The tenant ID. Specify the tenantId value in your account output.
  - azure service principal client id: The value of the appId parameter for the service principal.
  - azure service principal client secret: The value of the password parameter for the service principal.
    Important
    After you enter values for the previously listed parameters, the installation program creates a osServicePrincipal.json configuration file and stores this file in the ~/.azure/ directory on your computer. These actions ensure that the installation program can load the profile when it is creating an OpenShift Container Platform cluster on the target platform.
4. Select the region to deploy the cluster to.
5. Select the base domain to deploy the cluster to. The base domain corresponds to the Azure DNS Zone that you created for your cluster.
6. Enter a descriptive name for your cluster.
  Important
  All Azure resources that are available through public endpoints are subject to resource name restrictions, and you cannot create resources that use certain terms. For a list of terms that Azure restricts, see Resolve reserved resource name errors in the Azure documentation.
7. Paste the pull secret from the Red Hat OpenShift Cluster Manager.
Note
If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

Verification

When the cluster deployment completes successfully:

The terminal displays directions for accessing your cluster, including a link to the web console and credentials for the kubeadmin user.
Credential information also outputs to <installation_directory>/.openshift_install.log.

Important

Do not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

Example output

...
INFO Install complete!
INFO To access the cluster as the system:admin user when using 'oc', run 'export KUBECONFIG=/home/myuser/install_dir/auth/kubeconfig'
INFO Access the OpenShift web-console here: https://console-openshift-console.apps.mycluster.example.com
INFO Login to the console with user: "kubeadmin", and password: "password"
INFO Time elapsed: 36m22s

Important

The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.
It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.

6.5.6. Installing the OpenShift CLI by downloading the binary

You can install the OpenShift CLI (oc) to interact with OpenShift Container Platform from a command-line interface. You can install oc on Linux, Windows, or macOS.

Important

If you installed an earlier version of oc, you cannot use it to complete all of the commands in OpenShift Container Platform 4.11. Download and install the new version of oc.

Installing the OpenShift CLI on Linux

You can install the OpenShift CLI (oc) binary on Linux by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the architecture in the Product Variant drop-down menu.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 Linux Client entry and save the file.
Unpack the archive:
```
$ tar xvf <file>
```
Place the oc binary in a directory that is on your PATH.
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
$ oc <command>
```

Installing the OpenShift CLI on Windows

You can install the OpenShift CLI (oc) binary on Windows by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 Windows Client entry and save the file.
Unzip the archive with a ZIP program.
Move the oc binary to a directory that is on your PATH.
To check your PATH, open the command prompt and execute the following command:
```
C:\> path
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
C:\> oc <command>
```

Installing the OpenShift CLI on macOS

You can install the OpenShift CLI (oc) binary on macOS by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 macOS Client entry and save the file.
Note
For macOS arm64, choose the OpenShift v4.11 macOS arm64 Client entry.
Unpack and unzip the archive.
Move the oc binary to a directory on your PATH.
To check your PATH, open a terminal and execute the following command:
```
$ echo $PATH
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
$ oc <command>
```

6.5.7. Logging in to the cluster by using the CLI

You can log in to your cluster as a default system user by exporting the cluster kubeconfig file. The kubeconfig file contains information about the cluster that is used by the CLI to connect a client to the correct cluster and API server. The file is specific to a cluster and is created during OpenShift Container Platform installation.

Prerequisites

You deployed an OpenShift Container Platform cluster.
You installed the oc CLI.

Procedure

Export the kubeadmin credentials:
```
$ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1
```
1
For <installation_directory>, specify the path to the directory that you stored the installation files in.
Verify you can run oc commands successfully using the exported configuration:
```
$ oc whoami
```
Example output
```
system:admin
```

Additional resources

See Accessing the web console for more details about accessing and understanding the OpenShift Container Platform web console.

6.5.8. Telemetry access for OpenShift Container Platform

In OpenShift Container Platform 4.11, the Telemetry service, which runs by default to provide metrics about cluster health and the success of updates, requires internet access. If your cluster is connected to the internet, Telemetry runs automatically, and your cluster is registered to OpenShift Cluster Manager Hybrid Cloud Console.

After you confirm that your OpenShift Cluster Manager Hybrid Cloud Console inventory is correct, either maintained automatically by Telemetry or manually by using OpenShift Cluster Manager, use subscription watch to track your OpenShift Container Platform subscriptions at the account or multi-cluster level.

Additional resources

See About remote health monitoring for more information about the Telemetry service

6.5.9. Next steps

Customize your cluster.
If necessary, you can opt out of remote health reporting.

6.6. Installing a cluster on Azure with customizations

In OpenShift Container Platform version 4.11, you can install a customized cluster on infrastructure that the installation program provisions on Microsoft Azure. To customize the installation, you modify parameters in the install-config.yaml file before you install the cluster.

6.6.1. Prerequisites

You reviewed details about the OpenShift Container Platform installation and update processes.
You read the documentation on selecting a cluster installation method and preparing it for users.
You configured an Azure account to host the cluster and determined the tested and validated region to deploy the cluster to.
If you use a firewall, you configured it to allow the sites that your cluster requires access to.
If the cloud identity and access management (IAM) APIs are not accessible in your environment, or if you do not want to store an administrator-level credential secret in the kube-system namespace, you can manually create and maintain IAM credentials.
If you use customer-managed encryption keys, you prepared your Azure environment for encryption.

6.6.2. Internet access for OpenShift Container Platform

In OpenShift Container Platform 4.11, you require access to the internet to install your cluster.

You must have internet access to:

Access OpenShift Cluster Manager Hybrid Cloud Console to download the installation program and perform subscription management. If the cluster has internet access and you do not disable Telemetry, that service automatically entitles your cluster.
Access Quay.io to obtain the packages that are required to install your cluster.
Obtain the packages that are required to perform cluster updates.

Important

6.6.3. Generating a key pair for cluster node SSH access

Important

Do not skip this procedure in production environments, where disaster recovery and debugging is required.

Note

You must use a local key, not one that you configured with platform-specific approaches such as AWS key pairs.

Procedure

If you do not have an existing SSH key pair on your local machine to use for authentication onto your cluster nodes, create one. For example, on a computer that uses a Linux operating system, run the following command:
```
$ ssh-keygen -t ed25519 -N '' -f <path>/<file_name> 1
```
1
Specify the path and file name, such as ~/.ssh/id_ed25519, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.
Note
If you plan to install an OpenShift Container Platform cluster that uses FIPS validated or Modules In Process cryptographic libraries on the x86_64 architecture, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.
View the public SSH key:
```
$ cat <path>/<file_name>.pub
```
For example, run the following to view the ~/.ssh/id_ed25519.pub public key:
```
$ cat ~/.ssh/id_ed25519.pub
```
Add the SSH private key identity to the SSH agent for your local user, if it has not already been added. SSH agent management of the key is required for password-less SSH authentication onto your cluster nodes, or if you want to use the ./openshift-install gather command.
Note
On some distributions, default SSH private key identities such as ~/.ssh/id_rsa and ~/.ssh/id_dsa are managed automatically.
1. If the ssh-agent process is not already running for your local user, start it as a background task:
```
$ eval "$(ssh-agent -s)"
```
  Example output
```
Agent pid 31874
```
  Note
  If your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.
Add your SSH private key to the ssh-agent:
```
$ ssh-add <path>/<file_name> 1
```
1
Specify the path and file name for your SSH private key, such as ~/.ssh/id_ed25519
Example output
```
Identity added: /home/<you>/<path>/<file_name> (<computer_name>)
```

Next steps

When you install OpenShift Container Platform, provide the SSH public key to the installation program.

6.6.4. Selecting an Azure Marketplace image

If you are deploying an OpenShift Container Platform cluster using the Azure Marketplace offering, you must first obtain the Azure Marketplace image. The installation program uses this image to deploy worker nodes. When obtaining your image, consider the following:

While the images are the same, the Azure Marketplace publisher is different depending on your region. If you are located in North America, specify redhat as the publisher. If you are located in EMEA, specify redhat-limited as the publisher.
The offer includes a rh-ocp-worker SKU and a rh-ocp-worker-gen1 SKU. The rh-ocp-worker SKU represents a Hyper-V generation version 2 VM image. The default instance types used in OpenShift Container Platform are version 2 compatible. If you are going to use an instance type that is only version 1 compatible, use the image associated with the rh-ocp-worker-gen1 SKU. The rh-ocp-worker-gen1 SKU represents a Hyper-V version 1 VM image.

Prerequisites

You have installed the Azure CLI client (az).
Your Azure account is entitled for the offer and you have logged into this account with the Azure CLI client.

Procedure

Display all of the available OpenShift Container Platform images by running one of the following commands:

North America:

$  az vm image list --all --offer rh-ocp-worker --publisher redhat -o table

Example output

Offer          Publisher       Sku                 Urn                                                             Version
-------------  --------------  ------------------  --------------------------------------------------------------  --------------
rh-ocp-worker  RedHat          rh-ocp-worker       RedHat:rh-ocp-worker:rh-ocpworker:4.8.2021122100               4.8.2021122100
rh-ocp-worker  RedHat          rh-ocp-worker-gen1  RedHat:rh-ocp-worker:rh-ocp-worker-gen1:4.8.2021122100         4.8.2021122100

EMEA:

$  az vm image list --all --offer rh-ocp-worker --publisher redhat-limited -o table

Example output

Offer          Publisher       Sku                 Urn                                                             Version
-------------  --------------  ------------------  --------------------------------------------------------------  --------------
rh-ocp-worker  redhat-limited  rh-ocp-worker       redhat-limited:rh-ocp-worker:rh-ocp-worker:4.8.2021122100       4.8.2021122100
rh-ocp-worker  redhat-limited  rh-ocp-worker-gen1  redhat-limited:rh-ocp-worker:rh-ocp-worker-gen1:4.8.2021122100  4.8.2021122100

Note

Regardless of the version of OpenShift Container Platform you are installing, the correct version of the Azure Marketplace image to use is 4.8.x. If required, as part of the installation process, your VMs are automatically upgraded.

Inspect the image for your offer by running one of the following commands:

North America:

$ az vm image show --urn redhat:rh-ocp-worker:rh-ocp-worker:<version>

EMEA:

$ az vm image show --urn redhat-limited:rh-ocp-worker:rh-ocp-worker:<version>

Review the terms of the offer by running one of the following commands:

North America:

$ az vm image terms show --urn redhat:rh-ocp-worker:rh-ocp-worker:<version>

EMEA:

$ az vm image terms show --urn redhat-limited:rh-ocp-worker:rh-ocp-worker:<version>

Accept the terms of the offering by running one of the following commands:

North America:

$ az vm image terms accept --urn redhat:rh-ocp-worker:rh-ocp-worker:<version>

EMEA:

$ az vm image terms accept --urn redhat-limited:rh-ocp-worker:rh-ocp-worker:<version>

Record the image details of your offer. You must update the compute section in the install-config.yaml file with values for publisher, offer, sku, and version before deploying the cluster.

Sample install-config.yaml file with the Azure Marketplace worker nodes

apiVersion: v1
baseDomain: example.com
compute:
- hyperthreading: Enabled
  name: worker
  platform:
    azure:
      type: Standard_D4s_v5
      osImage:
        publisher: redhat
        offer: rh-ocp-worker
        sku: rh-ocp-worker
        version: 4.8.2021122100
  replicas: 3

6.6.5. Obtaining the installation program

Before you install OpenShift Container Platform, download the installation file on a local computer.

Prerequisites

You have a computer that runs Linux or macOS, with 500 MB of local disk space.

Procedure

Access the Infrastructure Provider page on the OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.
Select your infrastructure provider.
Navigate to the page for your installation type, download the installation program that corresponds with your host operating system and architecture, and place the file in the directory where you will store the installation configuration files.
Important
The installation program creates several files on the computer that you use to install your cluster. You must keep the installation program and the files that the installation program creates after you finish installing the cluster. Both files are required to delete the cluster.
Important
Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. To remove your cluster, complete the OpenShift Container Platform uninstallation procedures for your specific cloud provider.
Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:
```
$ tar -xvf openshift-install-linux.tar.gz
```
Download your installation pull secret from the Red Hat OpenShift Cluster Manager. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

6.6.6. Creating the installation configuration file

You can customize the OpenShift Container Platform cluster you install on Microsoft Azure.

Prerequisites

Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.
Obtain service principal permissions at the subscription level.

Procedure

Create the install-config.yaml file.
1. Change to the directory that contains the installation program and run the following command:
```
$ ./openshift-install create install-config --dir <installation_directory> 1
```
  1
  For <installation_directory>, specify the directory name to store the files that the installation program creates.
  When specifying the directory:
  - Verify that the directory has the execute permission. This permission is required to run Terraform binaries under the installation directory.
  - Use an empty directory. Some installation assets, such as bootstrap X.509 certificates, have short expiration intervals, therefore you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.
2. At the prompts, provide the configuration details for your cloud:
  1. Optional: Select an SSH key to use to access your cluster machines.
    Note
    For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.
  2. Select azure as the platform to target.
  3. If you do not have a Microsoft Azure profile stored on your computer, specify the following Azure parameter values for your subscription and service principal:
    azure subscription id: The subscription ID to use for the cluster. Specify the id value in your account output.
    azure tenant id: The tenant ID. Specify the tenantId value in your account output.
    azure service principal client id: The value of the appId parameter for the service principal.
    azure service principal client secret: The value of the password parameter for the service principal.
  4. Select the region to deploy the cluster to.
  5. Select the base domain to deploy the cluster to. The base domain corresponds to the Azure DNS Zone that you created for your cluster.
  6. Enter a descriptive name for your cluster.
    Important
    All Azure resources that are available through public endpoints are subject to resource name restrictions, and you cannot create resources that use certain terms. For a list of terms that Azure restricts, see Resolve reserved resource name errors in the Azure documentation.
  7. Paste the pull secret from the Red Hat OpenShift Cluster Manager.
Modify the install-config.yaml file. You can find more information about the available parameters in the "Installation configuration parameters" section.
Back up the install-config.yaml file so that you can use it to install multiple clusters.
Important
The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

6.6.6.1. Installation configuration parameters

Before you deploy an OpenShift Container Platform cluster, you provide parameter values to describe your account on the cloud platform that hosts your cluster and optionally customize your cluster’s platform. When you create the install-config.yaml installation configuration file, you provide values for the required parameters through the command line. If you customize your cluster, you can modify the install-config.yaml file to provide more details about the platform.

Note

After installation, you cannot modify these parameters in the install-config.yaml file.

6.6.6.1.1. Required configuration parameters

Required installation configuration parameters are described in the following table:

Table 6.1. Required parameters
Parameter	Description	Values
`apiVersion`	The API version for the `install-config.yaml` content. The current version is `v1`. The installer may also support older API versions.	String
`baseDomain`	The base domain of your cloud provider. The base domain is used to create routes to your OpenShift Container Platform cluster components. The full DNS name for your cluster is a combination of the `baseDomain` and `metadata.name` parameter values that uses the `<metadata.name>.<baseDomain>` format.	A fully-qualified domain or subdomain name, such as `example.com`.
`metadata`	Kubernetes resource `ObjectMeta`, from which only the `name` parameter is consumed.	Object
`metadata.name`	The name of the cluster. DNS records for the cluster are all subdomains of `{{.metadata.name}}.{{.baseDomain}}`.	String of lowercase letters, hyphens (`-`), and periods (`.`), such as `dev`.
`platform`	The configuration for the specific platform upon which to perform the installation: `alibabacloud`, `aws`, `baremetal`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `ovirt`, `vsphere`, or `{}`. For additional information about `platform.<platform>` parameters, consult the table for your specific platform that follows.	Object
`pullSecret`	Get a pull secret from the Red Hat OpenShift Cluster Manager to authenticate downloading container images for OpenShift Container Platform components from services such as Quay.io.	{ "auths":{ "cloud.openshift.com":{ "auth":"b3Blb=", "email":"you@example.com" }, "quay.io":{ "auth":"b3Blb=", "email":"you@example.com" } } }

6.6.6.1.2. Network configuration parameters

You can customize your installation configuration based on the requirements of your existing network infrastructure. For example, you can expand the IP address block for the cluster network or provide different IP address blocks than the defaults.

Only IPv4 addresses are supported.

Note

Globalnet is not supported with Red Hat OpenShift Data Foundation disaster recovery solutions. For regional disaster recovery scenarios, ensure that you use a nonoverlapping range of private IP addresses for the cluster and service networks in each cluster.

Table 6.2. Network parameters
Parameter	Description	Values
`networking`	The configuration for the cluster network.	Object Note You cannot modify parameters specified by the `networking` object after installation.
`networking.networkType`	The cluster network provider Container Network Interface (CNI) cluster network provider to install.	Either `OpenShiftSDN` or `OVNKubernetes`. `OpenShiftSDN` is a CNI provider for all-Linux networks. `OVNKubernetes` is a CNI provider for Linux networks and hybrid networks that contain both Linux and Windows servers. The default value is `OpenShiftSDN`.
`networking.clusterNetwork`	The IP address blocks for pods. The default value is `10.128.0.0/14` with a host prefix of `/23`. If you specify multiple IP address blocks, the blocks must not overlap.	An array of objects. For example: networking: clusterNetwork: - cidr: 10.128.0.0/14 hostPrefix: 23
`networking.clusterNetwork.cidr`	Required if you use `networking.clusterNetwork`. An IP address block. An IPv4 network.	An IP address block in Classless Inter-Domain Routing (CIDR) notation. The prefix length for an IPv4 block is between `0` and `32`.
`networking.clusterNetwork.hostPrefix`	The subnet prefix length to assign to each individual node. For example, if `hostPrefix` is set to `23` then each node is assigned a `/23` subnet out of the given `cidr`. A `hostPrefix` value of `23` provides 510 (2^(32 - 23) - 2) pod IP addresses.	A subnet prefix. The default value is `23`.
`networking.serviceNetwork`	The IP address block for services. The default value is `172.30.0.0/16`. The OpenShift SDN and OVN-Kubernetes network providers support only a single IP address block for the service network.	An array with an IP address block in CIDR format. For example: networking: serviceNetwork: - 172.30.0.0/16
`networking.machineNetwork`	The IP address blocks for machines. If you specify multiple IP address blocks, the blocks must not overlap.	An array of objects. For example: networking: machineNetwork: - cidr: 10.0.0.0/16
`networking.machineNetwork.cidr`	Required if you use `networking.machineNetwork`. An IP address block. The default value is `10.0.0.0/16` for all platforms other than libvirt. For libvirt, the default value is `192.168.126.0/24`.	An IP network block in CIDR notation. For example, `10.0.0.0/16`. Note Set the `networking.machineNetwork` to match the CIDR that the preferred NIC resides in.

6.6.6.1.3. Optional configuration parameters

Optional installation configuration parameters are described in the following table:

Table 6.3. Optional parameters
Parameter	Description	Values
`additionalTrustBundle`	A PEM-encoded X.509 certificate bundle that is added to the nodes' trusted certificate store. This trust bundle may also be used when a proxy has been configured.	String
`capabilities`	Controls the installation of optional core cluster components. You can reduce the footprint of your OpenShift Container Platform cluster by disabling optional components.	String array
`capabilities.baselineCapabilitySet`	Selects an initial set of optional capabilities to enable. Valid values are `None`, `v4.11` and `vCurrent`. `v4.11` enables the `baremetal` Operator, the `marketplace` Operator, and the `openshift-samples` content. `vCurrent` installs the recommended set of capabilities for the current version of OpenShift Container Platform. The default value is `vCurrent`.	String
`capabilities.additionalEnabledCapabilities`	Extends the set of optional capabilities beyond what you specify in `baselineCapabilitySet`. Valid values are `baremetal`, `marketplace` and `openshift-samples`. You may specify multiple capabilities in this parameter.	String array
`cgroupsV2`	Enables Linux control groups version 2 (cgroups v2) on specific nodes in your cluster. The OpenShift Container Platform process for enabling cgroups v2 disables all cgroup version 1 controllers and hierarchies. The OpenShift Container Platform cgroups version 2 feature is in Developer Preview and is not supported by Red Hat at this time.	`true`
`compute`	The configuration for the machines that comprise the compute nodes.	Array of `MachinePool` objects.
`compute.architecture`	Determines the instruction set architecture of the machines in the pool. Currently, clusters with varied architectures are not supported. All pools must specify the same architecture. Valid values are `amd64` (the default).	String
`compute.hyperthreading`	Whether to enable or disable simultaneous multithreading, or `hyperthreading`, on compute machines. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. Important If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.	`Enabled` or `Disabled`
`compute.name`	Required if you use `compute`. The name of the machine pool.	`worker`
`compute.platform`	Required if you use `compute`. Use this parameter to specify the cloud provider to host the worker machines. This parameter value must match the `controlPlane.platform` parameter value.	`alibabacloud`, `aws`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `ovirt`, `vsphere`, or `{}`
`compute.replicas`	The number of compute machines, which are also known as worker machines, to provision.	A positive integer greater than or equal to `2`. The default value is `3`.
`controlPlane`	The configuration for the machines that comprise the control plane.	Array of `MachinePool` objects.
`controlPlane.architecture`	Determines the instruction set architecture of the machines in the pool. Currently, clusters with varied architectures are not supported. All pools must specify the same architecture. Valid values are `amd64` (the default).	String
`controlPlane.hyperthreading`	Whether to enable or disable simultaneous multithreading, or `hyperthreading`, on control plane machines. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. Important If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.	`Enabled` or `Disabled`
`controlPlane.name`	Required if you use `controlPlane`. The name of the machine pool.	`master`
`controlPlane.platform`	Required if you use `controlPlane`. Use this parameter to specify the cloud provider that hosts the control plane machines. This parameter value must match the `compute.platform` parameter value.	`alibabacloud`, `aws`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `ovirt`, `vsphere`, or `{}`
`controlPlane.replicas`	The number of control plane machines to provision.	The only supported value is `3`, which is the default value.
`credentialsMode`	The Cloud Credential Operator (CCO) mode. If no mode is specified, the CCO dynamically tries to determine the capabilities of the provided credentials, with a preference for mint mode on the platforms where multiple modes are supported. Note Not all CCO modes are supported for all cloud providers. For more information on CCO modes, see the Cloud Credential Operator entry in the Cluster Operators reference content. Note If your AWS account has service control policies (SCP) enabled, you must configure the `credentialsMode` parameter to `Mint`, `Passthrough` or `Manual`.	`Mint`, `Passthrough`, `Manual` or an empty string (`""`).
`fips`	Enable or disable FIPS mode. The default is `false` (disabled). If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead. Important To enable FIPS mode for your cluster, you must run the installation program from a Red Hat Enterprise Linux (RHEL) computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see Installing the system in FIPS mode. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on OpenShift Container Platform deployments on the `x86_64` architecture. Note If you are using Azure File storage, you cannot enable FIPS mode.	`false` or `true`
`imageContentSources`	Sources and repositories for the release-image content.	Array of objects. Includes a `source` and, optionally, `mirrors`, as described in the following rows of this table.
`imageContentSources.source`	Required if you use `imageContentSources`. Specify the repository that users refer to, for example, in image pull specifications.	String
`imageContentSources.mirrors`	Specify one or more repositories that may also contain the same images.	Array of strings
`publish`	How to publish or expose the user-facing endpoints of your cluster, such as the Kubernetes API, OpenShift routes.	`Internal` or `External`. To deploy a private cluster, which cannot be accessed from the internet, set `publish` to `Internal`. The default value is `External`.
`sshKey`	The SSH key to authenticate access to your cluster machines. Note For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your `ssh-agent` process uses.	For example, `sshKey: ssh-ed25519 AAAA..`.

6.6.6.1.4. Additional Azure configuration parameters

Additional Azure configuration parameters are described in the following table.

Note

By default, if you specify availability zones in the install-config.yaml file, the installation program distributes the control plane machines and the compute machines across these availability zones within a region. To ensure high availability for your cluster, select a region with at least three availability zones. If your region contains fewer than three availability zones, the installation program places more than one control plane machine in the available zones.

Table 6.4. Additional Azure parameters
Parameter	Description	Values
`compute.platform.azure.encryptionAtHost`	Enables host-level encryption for compute machines. You can enable this encryption alongside user-managed server-side encryption. This feature encrypts temporary, ephemeral, cached and un-managed disks on the VM host. This is not a prerequisite for user-managed server-side encryption.	`true` or `false`. The default is `false`.
`compute.platform.azure.osDisk.diskSizeGB`	The Azure disk size for the VM.	Integer that represents the size of the disk in GB. The default is `128`.
`compute.platform.azure.osDisk.diskType`	Defines the type of disk.	`standard_LRS`, `premium_LRS`, or `standardSSD_LRS`. The default is `premium_LRS`.
`compute.platform.azure.ultraSSDCapability`	Enables the use of Azure ultra disks for persistent storage on compute nodes. This requires that your Azure region and zone have ultra disks available.	`Enabled`, `Disabled`. The default is `Disabled`.
`compute.platform.azure.osDisk.diskEncryptionSet.resourceGroup`	The name of the Azure resource group that contains the disk encryption set from the installation prerequisites. This resource group should be different than the resource group where you install the cluster to avoid deleting your Azure encryption key when the cluster is destroyed. This value is only necessary if you intend to install the cluster with user-managed disk encryption.	String, for example `production_encryption_resource_group`.
`compute.platform.azure.osDisk.diskEncryptionSet.name`	The name of the disk encryption set that contains the encryption key from the installation prerequisites.	String, for example `production_disk_encryption_set`.
`compute.platform.azure.osDisk.diskEncryptionSet.subscriptionId`	Defines the Azure subscription of the disk encryption set where the disk encryption set resides. This secondary disk encryption set is used to encrypt compute machines.	String, in the format `00000000-0000-0000-0000-000000000000`.
`compute.platform.azure.vmNetworkingType`	Enables accelerated networking. Accelerated networking enables single root I/O virtualization (SR-IOV) to a VM, improving its networking performance. If instance type of compute machines support `Accelerated` networking, by default, the installer enables `Accelerated` networking, otherwise the default networking type is `Basic`.	`Accelerated` or `Basic`.
`compute.platform.azure.type`	Defines the Azure instance type for compute machines.	String
`compute.platform.azure.zones`	The availability zones where the installation program creates compute machines.	String list
`controlPlane.platform.azure.type`	Defines the Azure instance type for control plane machines.	String
`controlPlane.platform.azure.zones`	The availability zones where the installation program creates control plane machines.	String list
`platform.azure.defaultMachinePlatform.encryptionAtHost`	Enables host-level encryption for compute machines. You can enable this encryption alongside user-managed server-side encryption. This feature encrypts temporary, ephemeral, cached, and un-managed disks on the VM host. This parameter is not a prerequisite for user-managed server-side encryption.	`true` or `false`. The default is `false`.
`platform.azure.defaultMachinePlatform.osDisk.diskEncryptionSet.name`	The name of the disk encryption set that contains the encryption key from the installation prerequisites.	String, for example, `production_disk_encryption_set`.
`platform.azure.defaultMachinePlatform.osDisk.diskEncryptionSet.resourceGroup`	The name of the Azure resource group that contains the disk encryption set from the installation prerequisites. To avoid deleting your Azure encryption key when the cluster is destroyed, this resource group must be different from the resource group where you install the cluster. This value is necessary only if you intend to install the cluster with user-managed disk encryption.	String, for example, `production_encryption_resource_group`.
`platform.azure.defaultMachinePlatform.osDisk.diskEncryptionSet.subscriptionId`	Defines the Azure subscription of the disk encryption set where the disk encryption set resides. This secondary disk encryption set is used to encrypt compute machines.	String, in the format `00000000-0000-0000-0000-000000000000`.
`platform.azure.defaultMachinePlatform.osDisk.diskSizeGB`	The Azure disk size for the VM.	Integer that represents the size of the disk in GB. The default is `128`.
`platform.azure.defaultMachinePlatform.osDisk.diskType`	Defines the type of disk.	`premium_LRS` or `standardSSD_LRS`. The default is `premium_LRS`.
`platform.azure.defaultMachinePlatform.type`	The Azure instance type for control plane and compute machines.	The Azure instance type.
`platform.azure.defaultMachinePlatform.zones`	The availability zones where the installation program creates compute and control plane machines.	String list.
`controlPlane.platform.azure.encryptionAtHost`	Enables host-level encryption for control plane machines. You can enable this encryption alongside user-managed server-side encryption. This feature encrypts temporary, ephemeral, cached and un-managed disks on the VM host. This is not a prerequisite for user-managed server-side encryption.	`true` or `false`. The default is `false`.
`controlPlane.platform.azure.osDisk.diskEncryptionSet.resourceGroup`	The name of the Azure resource group that contains the disk encryption set from the installation prerequisites. This resource group should be different than the resource group where you install the cluster to avoid deleting your Azure encryption key when the cluster is destroyed. This value is only necessary if you intend to install the cluster with user-managed disk encryption.	String, for example `production_encryption_resource_group`.
`controlPlane.platform.azure.osDisk.diskEncryptionSet.name`	The name of the disk encryption set that contains the encryption key from the installation prerequisites.	String, for example `production_disk_encryption_set`.
`controlPlane.platform.azure.osDisk.diskEncryptionSet.subscriptionId`	Defines the Azure subscription of the disk encryption set where the disk encryption set resides. This secondary disk encryption set is used to encrypt control plane machines.	String, in the format `00000000-0000-0000-0000-000000000000`.
`controlPlane.platform.azure.osDisk.diskSizeGB`	The Azure disk size for the VM.	Integer that represents the size of the disk in GB. The default is `1024`.
`controlPlane.platform.azure.osDisk.diskType`	Defines the type of disk.	`premium_LRS` or `standardSSD_LRS`. The default is `premium_LRS`.
`controlPlane.platform.azure.ultraSSDCapability`	Enables the use of Azure ultra disks for persistent storage on control plane machines. This requires that your Azure region and zone have ultra disks available.	`Enabled`, `Disabled`. The default is `Disabled`.
`controlPlane.platform.azure.vmNetworkingType`	Enables accelerated networking. Accelerated networking enables single root I/O virtualization (SR-IOV) to a VM, improving its networking performance. If instance type of control plane machines support `Accelerated` networking, by default, the installer enables `Accelerated` networking, otherwise the default networking type is `Basic`.	`Accelerated` or `Basic`.
`platform.azure.baseDomainResourceGroupName`	The name of the resource group that contains the DNS zone for your base domain.	String, for example `production_cluster`.
`platform.azure.resourceGroupName`	The name of an already existing resource group to install your cluster to. This resource group must be empty and only used for this specific cluster; the cluster components assume ownership of all resources in the resource group. If you limit the service principal scope of the installation program to this resource group, you must ensure all other resources used by the installation program in your environment have the necessary permissions, such as the public DNS zone and virtual network. Destroying the cluster by using the installation program deletes this resource group.	String, for example `existing_resource_group`.
`platform.azure.outboundType`	The outbound routing strategy used to connect your cluster to the internet. If you are using user-defined routing, you must have pre-existing networking available where the outbound routing has already been configured prior to installing a cluster. The installation program is not responsible for configuring user-defined routing.	`LoadBalancer` or `UserDefinedRouting`. The default is `LoadBalancer`.
`platform.azure.region`	The name of the Azure region that hosts your cluster.	Any valid region name, such as `centralus`.
`platform.azure.zone`	List of availability zones to place machines in. For high availability, specify at least two zones.	List of zones, for example `["1", "2", "3"]`.
`platform.azure.defaultMachinePlatform.ultraSSDCapability`	Enables the use of Azure ultra disks for persistent storage on control plane and compute machines. This requires that your Azure region and zone have ultra disks available.	`Enabled`, `Disabled`. The default is `Disabled`.
`platform.azure.networkResourceGroupName`	The name of the resource group that contains the existing VNet that you want to deploy your cluster to. This name cannot be the same as the `platform.azure.baseDomainResourceGroupName`.	String.
`platform.azure.virtualNetwork`	The name of the existing VNet that you want to deploy your cluster to.	String.
`platform.azure.controlPlaneSubnet`	The name of the existing subnet in your VNet that you want to deploy your control plane machines to.	Valid CIDR, for example `10.0.0.0/16`.
`platform.azure.computeSubnet`	The name of the existing subnet in your VNet that you want to deploy your compute machines to.	Valid CIDR, for example `10.0.0.0/16`.
`platform.azure.cloudName`	The name of the Azure cloud environment that is used to configure the Azure SDK with the appropriate Azure API endpoints. If empty, the default value `AzurePublicCloud` is used.	Any valid cloud environment, such as `AzurePublicCloud` or `AzureUSGovernmentCloud`.
`platform.azure.defaultMachinePlatform.vmNetworkingType`	Enables accelerated networking. Accelerated networking enables single root I/O virtualization (SR-IOV) to a VM, improving its networking performance.	`Accelerated` or `Basic`. If instance type of control plane and compute machines support `Accelerated` networking, by default, the installer enables `Accelerated` networking, otherwise the default networking type is `Basic`.

Note

You cannot customize Azure Availability Zones or Use tags to organize your Azure resources with an Azure cluster.

6.6.6.2. Minimum resource requirements for cluster installation

Each cluster machine must meet the following minimum requirements:

Table 6.5. Minimum resource requirements
Machine	Operating System	vCPU ^[1]	Virtual RAM	Storage	IOPS ^[2]
Bootstrap	RHCOS	4	16 GB	100 GB	300
Control plane	RHCOS	4	16 GB	100 GB	300
Compute	RHCOS, RHEL 8.6 and later ^[3]	2	8 GB	100 GB	300

One vCPU is equivalent to one physical core when simultaneous multithreading (SMT), or hyperthreading, is not enabled. When enabled, use the following formula to calculate the corresponding ratio: (threads per core × cores) × sockets = vCPUs.
OpenShift Container Platform and Kubernetes are sensitive to disk performance, and faster storage is recommended, particularly for etcd on the control plane nodes which require a 10 ms p99 fsync duration. Note that on many cloud platforms, storage size and IOPS scale together, so you might need to over-allocate storage volume to obtain sufficient performance.
As with all user-provisioned installations, if you choose to use RHEL compute machines in your cluster, you take responsibility for all operating system life cycle management and maintenance, including performing system updates, applying patches, and completing all other required tasks. Use of RHEL 7 compute machines is deprecated and has been removed in OpenShift Container Platform 4.10 and later.

Important

You are required to use Azure virtual machines that have the premiumIO parameter set to true.

If an instance type for your platform meets the minimum requirements for cluster machines, it is supported to use in OpenShift Container Platform.

Additional resources

Optimizing storage

6.6.6.3. Tested instance types for Azure

The following Microsoft Azure instance types have been tested with OpenShift Container Platform.

Example 6.1. Machine types

c4.*
c5.*
c5a.*
i3.*
m4.*
m5.*
m5a.*
m6a.*
m6i.*
r4.*
r5.*
r5a.*
r6i.*
t3.*
t3a.*

6.6.6.4. Sample customized install-config.yaml file for Azure

You can customize the install-config.yaml file to specify more details about your OpenShift Container Platform cluster’s platform or modify the values of the required parameters.

Important

This sample YAML file is provided for reference only. You must obtain your install-config.yaml file by using the installation program and modify it.

apiVersion: v1
baseDomain: example.com 1
controlPlane: 2
  hyperthreading: Enabled 3 4
  name: master
  platform:
    azure:
      encryptionAtHost: true
      ultraSSDCapability: Enabled
      osDisk:
        diskSizeGB: 1024 5
        diskType: Premium_LRS
        diskEncryptionSet:
          resourceGroup: disk_encryption_set_resource_group
          name: disk_encryption_set_name
          subscriptionId: secondary_subscription_id
      type: Standard_D8s_v3
  replicas: 3
compute: 6
- hyperthreading: Enabled 7
  name: worker
  platform:
    azure:
      ultraSSDCapability: Enabled
      type: Standard_D2s_v3
      encryptionAtHost: true
      osDisk:
        diskSizeGB: 512 8
        diskType: Standard_LRS
        diskEncryptionSet:
          resourceGroup: disk_encryption_set_resource_group
          name: disk_encryption_set_name
          subscriptionId: secondary_subscription_id
      zones: 9
      - "1"
      - "2"
      - "3"
  replicas: 5
metadata:
  name: test-cluster 10
networking:
  clusterNetwork:
  - cidr: 10.128.0.0/14
    hostPrefix: 23
  machineNetwork:
  - cidr: 10.0.0.0/16
  networkType: OpenShiftSDN
  serviceNetwork:
  - 172.30.0.0/16
platform:
  azure:
    defaultMachinePlatform:
      ultraSSDCapability: Enabled
    baseDomainResourceGroupName: resource_group 11
    region: centralus 12
    resourceGroupName: existing_resource_group 13
    outboundType: Loadbalancer
    cloudName: AzurePublicCloud
pullSecret: '{"auths": ...}' 14
fips: false 15
sshKey: ssh-ed25519 AAAA... 16

1 10 12 14: Required. The installation program prompts you for this value.
2 6: If you do not provide these parameters and values, the installation program provides the default value.
3 7: The controlPlane section is a single mapping, but the compute section is a sequence of mappings. To meet the requirements of the different data structures, the first line of the compute section must begin with a hyphen, -, and the first line of the controlPlane section must not. Only one control plane pool is used.
4: Whether to enable or disable simultaneous multithreading, or hyperthreading. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. You can disable it by setting the parameter value to Disabled. If you disable simultaneous multithreading in some cluster machines, you must disable it in all cluster machines.
Important
If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance. Use larger virtual machine types, such as Standard_D8s_v3, for your machines if you disable simultaneous multithreading.
5 8: You can specify the size of the disk to use in GB. Minimum recommendation for control plane nodes is 1024 GB.
9: Specify a list of zones to deploy your machines to. For high availability, specify at least two zones.
11: Specify the name of the resource group that contains the DNS zone for your base domain.
13: Specify the name of an already existing resource group to install your cluster to. If undefined, a new resource group is created for the cluster.
15: Whether to enable or disable FIPS mode. By default, FIPS mode is not enabled. If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead.
Important
To enable FIPS mode for your cluster, you must run the installation program from a Red Hat Enterprise Linux (RHEL) computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see Installing the system in FIPS mode. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on OpenShift Container Platform deployments on the x86_64 architecture.
16: You can optionally provide the sshKey value that you use to access the machines in your cluster.
Note
For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

6.6.6.5. Configuring the cluster-wide proxy during installation

Production environments can deny direct access to the internet and instead have an HTTP or HTTPS proxy available. You can configure a new OpenShift Container Platform cluster to use a proxy by configuring the proxy settings in the install-config.yaml file.

Prerequisites

You have an existing install-config.yaml file.
You reviewed the sites that your cluster requires access to and determined whether any of them need to bypass the proxy. By default, all cluster egress traffic is proxied, including calls to hosting cloud provider APIs. You added sites to the Proxy object’s spec.noProxy field to bypass the proxy if necessary.
Note
The Proxy object status.noProxy field is populated with the values of the networking.machineNetwork[].cidr, networking.clusterNetwork[].cidr, and networking.serviceNetwork[] fields from your installation configuration.
For installations on Amazon Web Services (AWS), Google Cloud Platform (GCP), Microsoft Azure, and Red Hat OpenStack Platform (RHOSP), the Proxy object status.noProxy field is also populated with the instance metadata endpoint (169.254.169.254).

Procedure

Edit your install-config.yaml file and add the proxy settings. For example:
```
apiVersion: v1
baseDomain: my.domain.com
proxy:
  httpProxy: http://<username>:<pswd>@<ip>:<port> 1
  httpsProxy: https://<username>:<pswd>@<ip>:<port> 2
  noProxy: example.com 3
additionalTrustBundle: | 4
    -----BEGIN CERTIFICATE-----
    <MY_TRUSTED_CA_CERT>
    -----END CERTIFICATE-----
```
1
A proxy URL to use for creating HTTP connections outside the cluster. The URL scheme must be http.
2
A proxy URL to use for creating HTTPS connections outside the cluster.
3
A comma-separated list of destination domain names, IP addresses, or other network CIDRs to exclude from proxying. Preface a domain with . to match subdomains only. For example, .y.com matches x.y.com, but not y.com. Use * to bypass the proxy for all destinations.
4
If provided, the installation program generates a config map that is named user-ca-bundle in the openshift-config namespace that contains one or more additional CA certificates that are required for proxying HTTPS connections. The Cluster Network Operator then creates a trusted-ca-bundle config map that merges these contents with the Red Hat Enterprise Linux CoreOS (RHCOS) trust bundle, and this config map is referenced in the trustedCA field of the Proxy object. The additionalTrustBundle field is required unless the proxy’s identity certificate is signed by an authority from the RHCOS trust bundle.
Note
The installation program does not support the proxy readinessEndpoints field.
Note
If the installer times out, restart and then complete the deployment by using the wait-for command of the installer. For example:
```
$ ./openshift-install wait-for install-complete --log-level debug
```
Save the file and reference it when installing OpenShift Container Platform.

The installation program creates a cluster-wide proxy that is named cluster that uses the proxy settings in the provided install-config.yaml file. If no proxy settings are provided, a cluster Proxy object is still created, but it will have a nil spec.

Note

Only the Proxy object named cluster is supported, and no additional proxies can be created.

Additional resources

For more details about Accelerated Networking, see Accelerated Networking for Microsoft Azure VMs.

6.6.7. Deploying the cluster

You can install OpenShift Container Platform on a compatible cloud platform.

Important

You can run the create cluster command of the installation program only once, during initial installation.

Prerequisites

Configure an account with the cloud platform that hosts your cluster.
Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.

Procedure

Change to the directory that contains the installation program and initialize the cluster deployment:
```
$ ./openshift-install create cluster --dir <installation_directory> \ 1
    --log-level=info 2
```
1
For <installation_directory>, specify the location of your customized ./install-config.yaml file.
2
To view different installation details, specify warn, debug, or error instead of info.
Note
If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

Verification

When the cluster deployment completes successfully:

The terminal displays directions for accessing your cluster, including a link to the web console and credentials for the kubeadmin user.
Credential information also outputs to <installation_directory>/.openshift_install.log.

Important

Do not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

Example output

...
INFO Install complete!
INFO To access the cluster as the system:admin user when using 'oc', run 'export KUBECONFIG=/home/myuser/install_dir/auth/kubeconfig'
INFO Access the OpenShift web-console here: https://console-openshift-console.apps.mycluster.example.com
INFO Login to the console with user: "kubeadmin", and password: "password"
INFO Time elapsed: 36m22s

Important

The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.
It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.

6.6.8. Finalizing user-managed encryption after installation

If you installed OpenShift Container Platform using a user-managed encryption key, you can complete the installation by creating a new storage class and granting write permissions to the Azure cluster resource group.

Procedure

Obtain the identity of the cluster resource group used by the installer:
1. If you specified an existing resource group in install-config.yaml, obtain its Azure identity by running the following command:
```
$ az identity list --resource-group "<existing_resource_group>"
```
2. If you did not specify a existing resource group in install-config.yaml, locate the resource group that the installer created, and then obtain its Azure identity by running the following commands:
```
$ az group list
```
```
$ az identity list --resource-group "<installer_created_resource_group>"
```
Grant a role assignment to the cluster resource group so that it can write to the Disk Encryption Set by running the following command:
```
$ az role assignment create --role "<privileged_role>" \1
    --assignee "<resource_group_identity>" 2
```
1
Specifies an Azure role that has read/write permissions to the disk encryption set. You can use the Owner role or a custom role with the necessary permissions.
2
Specifies the identity of the cluster resource group.
Obtain the id of the disk encryption set you created prior to installation by running the following command:
```
$ az disk-encryption-set show -n <disk_encryption_set_name> \1
     --resource-group <resource_group_name> 2
```
1
Specifies the name of the disk encryption set.
2
Specifies the resource group that contains the disk encryption set. The id is in the format of "/subscriptions/…/resourceGroups/…/providers/Microsoft.Compute/diskEncryptionSets/…".
Obtain the identity of the cluster service principal by running the following command:
```
$ az identity show -g <cluster_resource_group> \1
     -n <cluster_service_principal_name> \2
     --query principalId --out tsv
```
1
Specifies the name of the cluster resource group created by the installation program.
2
Specifies the name of the cluster service principal created by the installation program. The identity is in the format of 12345678-1234-1234-1234-1234567890.
Create a role assignment that grants the cluster service principal Contributor privileges to the disk encryption set by running the following command:
```
$ az role assignment create --assignee <cluster_service_principal_id> \1
     --role 'Contributor' \//
     --scope <disk_encryption_set_id> \2
```
1
Specifies the ID of the cluster service principal obtained in the previous step.
2
Specifies the ID of the disk encryption set.
Create a storage class that uses the user-managed disk encryption set:
1. Save the following storage class definition to a file, for example storage-class-definition.yaml:
```
kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
  name: managed-premium
provisioner: kubernetes.io/azure-disk
parameters:
  skuname: Premium_LRS
  kind: Managed
  diskEncryptionSetID: "<disk_encryption_set_ID>" 1
  resourceGroup: "<resource_group_name>" 2
reclaimPolicy: Delete
allowVolumeExpansion: true
volumeBindingMode: WaitForFirstConsumer
```
  1
  Specifies the ID of the disk encryption set that you created in the prerequisite steps, for example "/subscriptions/xxxxxx-xxxxx-xxxxx/resourceGroups/test-encryption/providers/Microsoft.Compute/diskEncryptionSets/disk-encryption-set-xxxxxx".
  2
  Specifies the name of the resource group used by the installer. This is the same resource group from the first step.
2. Create the storage class managed-premium from the file you created by running the following command:
```
$ oc create -f storage-class-definition.yaml
```
Select the managed-premium storage class when you create persistent volumes to use encrypted storage.

6.6.9. Installing the OpenShift CLI by downloading the binary

You can install the OpenShift CLI (oc) to interact with OpenShift Container Platform from a command-line interface. You can install oc on Linux, Windows, or macOS.

Important

If you installed an earlier version of oc, you cannot use it to complete all of the commands in OpenShift Container Platform 4.11. Download and install the new version of oc.

Installing the OpenShift CLI on Linux

You can install the OpenShift CLI (oc) binary on Linux by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the architecture in the Product Variant drop-down menu.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 Linux Client entry and save the file.
Unpack the archive:
```
$ tar xvf <file>
```
Place the oc binary in a directory that is on your PATH.
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
$ oc <command>
```

Installing the OpenShift CLI on Windows

You can install the OpenShift CLI (oc) binary on Windows by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 Windows Client entry and save the file.
Unzip the archive with a ZIP program.
Move the oc binary to a directory that is on your PATH.
To check your PATH, open the command prompt and execute the following command:
```
C:\> path
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
C:\> oc <command>
```

Installing the OpenShift CLI on macOS

You can install the OpenShift CLI (oc) binary on macOS by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 macOS Client entry and save the file.
Note
For macOS arm64, choose the OpenShift v4.11 macOS arm64 Client entry.
Unpack and unzip the archive.
Move the oc binary to a directory on your PATH.
To check your PATH, open a terminal and execute the following command:
```
$ echo $PATH
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
$ oc <command>
```

6.6.10. Logging in to the cluster by using the CLI

Prerequisites

You deployed an OpenShift Container Platform cluster.
You installed the oc CLI.

Procedure

Export the kubeadmin credentials:
```
$ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1
```
1
For <installation_directory>, specify the path to the directory that you stored the installation files in.
Verify you can run oc commands successfully using the exported configuration:
```
$ oc whoami
```
Example output
```
system:admin
```

Additional resources

See Accessing the web console for more details about accessing and understanding the OpenShift Container Platform web console.

6.6.11. Telemetry access for OpenShift Container Platform

Additional resources

See About remote health monitoring for more information about the Telemetry service

6.6.12. Next steps

Customize your cluster.
If necessary, you can opt out of remote health reporting.

6.7. Installing a cluster on Azure with network customizations

In OpenShift Container Platform version 4.11, you can install a cluster with a customized network configuration on infrastructure that the installation program provisions on Microsoft Azure. By customizing your network configuration, your cluster can coexist with existing IP address allocations in your environment and integrate with existing MTU and VXLAN configurations.

You must set most of the network configuration parameters during installation, and you can modify only kubeProxy configuration parameters in a running cluster.

6.7.1. Prerequisites

You reviewed details about the OpenShift Container Platform installation and update processes.
You read the documentation on selecting a cluster installation method and preparing it for users.
You configured an Azure account to host the cluster and determined the tested and validated region to deploy the cluster to.
If you use a firewall, you configured it to allow the sites that your cluster requires access to.
If the cloud identity and access management (IAM) APIs are not accessible in your environment, or if you do not want to store an administrator-level credential secret in the kube-system namespace, you can manually create and maintain IAM credentials. Manual mode can also be used in environments where the cloud IAM APIs are not reachable.
If you use customer-managed encryption keys, you prepared your Azure environment for encryption.

6.7.2. Internet access for OpenShift Container Platform

In OpenShift Container Platform 4.11, you require access to the internet to install your cluster.

You must have internet access to:

Access OpenShift Cluster Manager Hybrid Cloud Console to download the installation program and perform subscription management. If the cluster has internet access and you do not disable Telemetry, that service automatically entitles your cluster.
Access Quay.io to obtain the packages that are required to install your cluster.
Obtain the packages that are required to perform cluster updates.

Important

6.7.3. Generating a key pair for cluster node SSH access

Important

Do not skip this procedure in production environments, where disaster recovery and debugging is required.

Note

You must use a local key, not one that you configured with platform-specific approaches such as AWS key pairs.

Procedure

If you do not have an existing SSH key pair on your local machine to use for authentication onto your cluster nodes, create one. For example, on a computer that uses a Linux operating system, run the following command:
```
$ ssh-keygen -t ed25519 -N '' -f <path>/<file_name> 1
```
1
Specify the path and file name, such as ~/.ssh/id_ed25519, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.
Note
If you plan to install an OpenShift Container Platform cluster that uses FIPS validated or Modules In Process cryptographic libraries on the x86_64 architecture, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.
View the public SSH key:
```
$ cat <path>/<file_name>.pub
```
For example, run the following to view the ~/.ssh/id_ed25519.pub public key:
```
$ cat ~/.ssh/id_ed25519.pub
```
Add the SSH private key identity to the SSH agent for your local user, if it has not already been added. SSH agent management of the key is required for password-less SSH authentication onto your cluster nodes, or if you want to use the ./openshift-install gather command.
Note
On some distributions, default SSH private key identities such as ~/.ssh/id_rsa and ~/.ssh/id_dsa are managed automatically.
1. If the ssh-agent process is not already running for your local user, start it as a background task:
```
$ eval "$(ssh-agent -s)"
```
  Example output
```
Agent pid 31874
```
  Note
  If your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.
Add your SSH private key to the ssh-agent:
```
$ ssh-add <path>/<file_name> 1
```
1
Specify the path and file name for your SSH private key, such as ~/.ssh/id_ed25519
Example output
```
Identity added: /home/<you>/<path>/<file_name> (<computer_name>)
```

Next steps

When you install OpenShift Container Platform, provide the SSH public key to the installation program.

6.7.4. Obtaining the installation program

Before you install OpenShift Container Platform, download the installation file on a local computer.

Prerequisites

You have a computer that runs Linux or macOS, with 500 MB of local disk space.

Procedure

Access the Infrastructure Provider page on the OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.
Select your infrastructure provider.
Navigate to the page for your installation type, download the installation program that corresponds with your host operating system and architecture, and place the file in the directory where you will store the installation configuration files.
Important
The installation program creates several files on the computer that you use to install your cluster. You must keep the installation program and the files that the installation program creates after you finish installing the cluster. Both files are required to delete the cluster.
Important
Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. To remove your cluster, complete the OpenShift Container Platform uninstallation procedures for your specific cloud provider.
Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:
```
$ tar -xvf openshift-install-linux.tar.gz
```
Download your installation pull secret from the Red Hat OpenShift Cluster Manager. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

6.7.5. Creating the installation configuration file

You can customize the OpenShift Container Platform cluster you install on Microsoft Azure.

Prerequisites

Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.
Obtain service principal permissions at the subscription level.

Procedure

Create the install-config.yaml file.
1. Change to the directory that contains the installation program and run the following command:
```
$ ./openshift-install create install-config --dir <installation_directory> 1
```
  1
  For <installation_directory>, specify the directory name to store the files that the installation program creates.
  When specifying the directory:
  - Verify that the directory has the execute permission. This permission is required to run Terraform binaries under the installation directory.
  - Use an empty directory. Some installation assets, such as bootstrap X.509 certificates, have short expiration intervals, therefore you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.
2. At the prompts, provide the configuration details for your cloud:
  1. Optional: Select an SSH key to use to access your cluster machines.
    Note
    For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.
  2. Select azure as the platform to target.
  3. If you do not have a Microsoft Azure profile stored on your computer, specify the following Azure parameter values for your subscription and service principal:
    azure subscription id: The subscription ID to use for the cluster. Specify the id value in your account output.
    azure tenant id: The tenant ID. Specify the tenantId value in your account output.
    azure service principal client id: The value of the appId parameter for the service principal.
    azure service principal client secret: The value of the password parameter for the service principal.
  4. Select the region to deploy the cluster to.
  5. Select the base domain to deploy the cluster to. The base domain corresponds to the Azure DNS Zone that you created for your cluster.
  6. Enter a descriptive name for your cluster.
    Important
    All Azure resources that are available through public endpoints are subject to resource name restrictions, and you cannot create resources that use certain terms. For a list of terms that Azure restricts, see Resolve reserved resource name errors in the Azure documentation.
  7. Paste the pull secret from the Red Hat OpenShift Cluster Manager.
Modify the install-config.yaml file. You can find more information about the available parameters in the "Installation configuration parameters" section.
Back up the install-config.yaml file so that you can use it to install multiple clusters.
Important
The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

6.7.5.1. Installation configuration parameters

Note

After installation, you cannot modify these parameters in the install-config.yaml file.

6.7.5.1.1. Required configuration parameters

Required installation configuration parameters are described in the following table:

Table 6.6. Required parameters
Parameter	Description	Values
`apiVersion`	The API version for the `install-config.yaml` content. The current version is `v1`. The installer may also support older API versions.	String
`baseDomain`	The base domain of your cloud provider. The base domain is used to create routes to your OpenShift Container Platform cluster components. The full DNS name for your cluster is a combination of the `baseDomain` and `metadata.name` parameter values that uses the `<metadata.name>.<baseDomain>` format.	A fully-qualified domain or subdomain name, such as `example.com`.
`metadata`	Kubernetes resource `ObjectMeta`, from which only the `name` parameter is consumed.	Object
`metadata.name`	The name of the cluster. DNS records for the cluster are all subdomains of `{{.metadata.name}}.{{.baseDomain}}`.	String of lowercase letters, hyphens (`-`), and periods (`.`), such as `dev`.
`platform`	The configuration for the specific platform upon which to perform the installation: `alibabacloud`, `aws`, `baremetal`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `ovirt`, `vsphere`, or `{}`. For additional information about `platform.<platform>` parameters, consult the table for your specific platform that follows.	Object
`pullSecret`	Get a pull secret from the Red Hat OpenShift Cluster Manager to authenticate downloading container images for OpenShift Container Platform components from services such as Quay.io.	{ "auths":{ "cloud.openshift.com":{ "auth":"b3Blb=", "email":"you@example.com" }, "quay.io":{ "auth":"b3Blb=", "email":"you@example.com" } } }

6.7.5.1.2. Network configuration parameters

Only IPv4 addresses are supported.

Note

Table 6.7. Network parameters
Parameter	Description	Values
`networking`	The configuration for the cluster network.	Object Note You cannot modify parameters specified by the `networking` object after installation.
`networking.networkType`	The cluster network provider Container Network Interface (CNI) cluster network provider to install.	Either `OpenShiftSDN` or `OVNKubernetes`. `OpenShiftSDN` is a CNI provider for all-Linux networks. `OVNKubernetes` is a CNI provider for Linux networks and hybrid networks that contain both Linux and Windows servers. The default value is `OpenShiftSDN`.
`networking.clusterNetwork`	The IP address blocks for pods. The default value is `10.128.0.0/14` with a host prefix of `/23`. If you specify multiple IP address blocks, the blocks must not overlap.	An array of objects. For example: networking: clusterNetwork: - cidr: 10.128.0.0/14 hostPrefix: 23
`networking.clusterNetwork.cidr`	Required if you use `networking.clusterNetwork`. An IP address block. An IPv4 network.	An IP address block in Classless Inter-Domain Routing (CIDR) notation. The prefix length for an IPv4 block is between `0` and `32`.
`networking.clusterNetwork.hostPrefix`	The subnet prefix length to assign to each individual node. For example, if `hostPrefix` is set to `23` then each node is assigned a `/23` subnet out of the given `cidr`. A `hostPrefix` value of `23` provides 510 (2^(32 - 23) - 2) pod IP addresses.	A subnet prefix. The default value is `23`.
`networking.serviceNetwork`	The IP address block for services. The default value is `172.30.0.0/16`. The OpenShift SDN and OVN-Kubernetes network providers support only a single IP address block for the service network.	An array with an IP address block in CIDR format. For example: networking: serviceNetwork: - 172.30.0.0/16
`networking.machineNetwork`	The IP address blocks for machines. If you specify multiple IP address blocks, the blocks must not overlap.	An array of objects. For example: networking: machineNetwork: - cidr: 10.0.0.0/16
`networking.machineNetwork.cidr`	Required if you use `networking.machineNetwork`. An IP address block. The default value is `10.0.0.0/16` for all platforms other than libvirt. For libvirt, the default value is `192.168.126.0/24`.	An IP network block in CIDR notation. For example, `10.0.0.0/16`. Note Set the `networking.machineNetwork` to match the CIDR that the preferred NIC resides in.

6.7.5.1.3. Optional configuration parameters

Optional installation configuration parameters are described in the following table:

Table 6.8. Optional parameters
Parameter	Description	Values
`additionalTrustBundle`	A PEM-encoded X.509 certificate bundle that is added to the nodes' trusted certificate store. This trust bundle may also be used when a proxy has been configured.	String
`capabilities`	Controls the installation of optional core cluster components. You can reduce the footprint of your OpenShift Container Platform cluster by disabling optional components.	String array
`capabilities.baselineCapabilitySet`	Selects an initial set of optional capabilities to enable. Valid values are `None`, `v4.11` and `vCurrent`. `v4.11` enables the `baremetal` Operator, the `marketplace` Operator, and the `openshift-samples` content. `vCurrent` installs the recommended set of capabilities for the current version of OpenShift Container Platform. The default value is `vCurrent`.	String
`capabilities.additionalEnabledCapabilities`	Extends the set of optional capabilities beyond what you specify in `baselineCapabilitySet`. Valid values are `baremetal`, `marketplace` and `openshift-samples`. You may specify multiple capabilities in this parameter.	String array
`cgroupsV2`	Enables Linux control groups version 2 (cgroups v2) on specific nodes in your cluster. The OpenShift Container Platform process for enabling cgroups v2 disables all cgroup version 1 controllers and hierarchies. The OpenShift Container Platform cgroups version 2 feature is in Developer Preview and is not supported by Red Hat at this time.	`true`
`compute`	The configuration for the machines that comprise the compute nodes.	Array of `MachinePool` objects.
`compute.architecture`	Determines the instruction set architecture of the machines in the pool. Currently, clusters with varied architectures are not supported. All pools must specify the same architecture. Valid values are `amd64` (the default).	String
`compute.hyperthreading`	Whether to enable or disable simultaneous multithreading, or `hyperthreading`, on compute machines. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. Important If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.	`Enabled` or `Disabled`
`compute.name`	Required if you use `compute`. The name of the machine pool.	`worker`
`compute.platform`	Required if you use `compute`. Use this parameter to specify the cloud provider to host the worker machines. This parameter value must match the `controlPlane.platform` parameter value.	`alibabacloud`, `aws`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `ovirt`, `vsphere`, or `{}`
`compute.replicas`	The number of compute machines, which are also known as worker machines, to provision.	A positive integer greater than or equal to `2`. The default value is `3`.
`controlPlane`	The configuration for the machines that comprise the control plane.	Array of `MachinePool` objects.
`controlPlane.architecture`	Determines the instruction set architecture of the machines in the pool. Currently, clusters with varied architectures are not supported. All pools must specify the same architecture. Valid values are `amd64` (the default).	String
`controlPlane.hyperthreading`	Whether to enable or disable simultaneous multithreading, or `hyperthreading`, on control plane machines. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. Important If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.	`Enabled` or `Disabled`
`controlPlane.name`	Required if you use `controlPlane`. The name of the machine pool.	`master`
`controlPlane.platform`	Required if you use `controlPlane`. Use this parameter to specify the cloud provider that hosts the control plane machines. This parameter value must match the `compute.platform` parameter value.	`alibabacloud`, `aws`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `ovirt`, `vsphere`, or `{}`
`controlPlane.replicas`	The number of control plane machines to provision.	The only supported value is `3`, which is the default value.
`credentialsMode`	The Cloud Credential Operator (CCO) mode. If no mode is specified, the CCO dynamically tries to determine the capabilities of the provided credentials, with a preference for mint mode on the platforms where multiple modes are supported. Note Not all CCO modes are supported for all cloud providers. For more information on CCO modes, see the Cloud Credential Operator entry in the Cluster Operators reference content. Note If your AWS account has service control policies (SCP) enabled, you must configure the `credentialsMode` parameter to `Mint`, `Passthrough` or `Manual`.	`Mint`, `Passthrough`, `Manual` or an empty string (`""`).
`fips`	Enable or disable FIPS mode. The default is `false` (disabled). If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead. Important To enable FIPS mode for your cluster, you must run the installation program from a Red Hat Enterprise Linux (RHEL) computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see Installing the system in FIPS mode. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on OpenShift Container Platform deployments on the `x86_64` architecture. Note If you are using Azure File storage, you cannot enable FIPS mode.	`false` or `true`
`imageContentSources`	Sources and repositories for the release-image content.	Array of objects. Includes a `source` and, optionally, `mirrors`, as described in the following rows of this table.
`imageContentSources.source`	Required if you use `imageContentSources`. Specify the repository that users refer to, for example, in image pull specifications.	String
`imageContentSources.mirrors`	Specify one or more repositories that may also contain the same images.	Array of strings
`publish`	How to publish or expose the user-facing endpoints of your cluster, such as the Kubernetes API, OpenShift routes.	`Internal` or `External`. To deploy a private cluster, which cannot be accessed from the internet, set `publish` to `Internal`. The default value is `External`.
`sshKey`	The SSH key to authenticate access to your cluster machines. Note For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your `ssh-agent` process uses.	For example, `sshKey: ssh-ed25519 AAAA..`.

6.7.5.1.4. Additional Azure configuration parameters

Additional Azure configuration parameters are described in the following table.

Note

Table 6.9. Additional Azure parameters
Parameter	Description	Values
`compute.platform.azure.encryptionAtHost`	Enables host-level encryption for compute machines. You can enable this encryption alongside user-managed server-side encryption. This feature encrypts temporary, ephemeral, cached and un-managed disks on the VM host. This is not a prerequisite for user-managed server-side encryption.	`true` or `false`. The default is `false`.
`compute.platform.azure.osDisk.diskSizeGB`	The Azure disk size for the VM.	Integer that represents the size of the disk in GB. The default is `128`.
`compute.platform.azure.osDisk.diskType`	Defines the type of disk.	`standard_LRS`, `premium_LRS`, or `standardSSD_LRS`. The default is `premium_LRS`.
`compute.platform.azure.ultraSSDCapability`	Enables the use of Azure ultra disks for persistent storage on compute nodes. This requires that your Azure region and zone have ultra disks available.	`Enabled`, `Disabled`. The default is `Disabled`.
`compute.platform.azure.osDisk.diskEncryptionSet.resourceGroup`	The name of the Azure resource group that contains the disk encryption set from the installation prerequisites. This resource group should be different than the resource group where you install the cluster to avoid deleting your Azure encryption key when the cluster is destroyed. This value is only necessary if you intend to install the cluster with user-managed disk encryption.	String, for example `production_encryption_resource_group`.
`compute.platform.azure.osDisk.diskEncryptionSet.name`	The name of the disk encryption set that contains the encryption key from the installation prerequisites.	String, for example `production_disk_encryption_set`.
`compute.platform.azure.osDisk.diskEncryptionSet.subscriptionId`	Defines the Azure subscription of the disk encryption set where the disk encryption set resides. This secondary disk encryption set is used to encrypt compute machines.	String, in the format `00000000-0000-0000-0000-000000000000`.
`compute.platform.azure.vmNetworkingType`	Enables accelerated networking. Accelerated networking enables single root I/O virtualization (SR-IOV) to a VM, improving its networking performance. If instance type of compute machines support `Accelerated` networking, by default, the installer enables `Accelerated` networking, otherwise the default networking type is `Basic`.	`Accelerated` or `Basic`.
`compute.platform.azure.type`	Defines the Azure instance type for compute machines.	String
`compute.platform.azure.zones`	The availability zones where the installation program creates compute machines.	String list
`controlPlane.platform.azure.type`	Defines the Azure instance type for control plane machines.	String
`controlPlane.platform.azure.zones`	The availability zones where the installation program creates control plane machines.	String list
`platform.azure.defaultMachinePlatform.encryptionAtHost`	Enables host-level encryption for compute machines. You can enable this encryption alongside user-managed server-side encryption. This feature encrypts temporary, ephemeral, cached, and un-managed disks on the VM host. This parameter is not a prerequisite for user-managed server-side encryption.	`true` or `false`. The default is `false`.
`platform.azure.defaultMachinePlatform.osDisk.diskEncryptionSet.name`	The name of the disk encryption set that contains the encryption key from the installation prerequisites.	String, for example, `production_disk_encryption_set`.
`platform.azure.defaultMachinePlatform.osDisk.diskEncryptionSet.resourceGroup`	The name of the Azure resource group that contains the disk encryption set from the installation prerequisites. To avoid deleting your Azure encryption key when the cluster is destroyed, this resource group must be different from the resource group where you install the cluster. This value is necessary only if you intend to install the cluster with user-managed disk encryption.	String, for example, `production_encryption_resource_group`.
`platform.azure.defaultMachinePlatform.osDisk.diskEncryptionSet.subscriptionId`	Defines the Azure subscription of the disk encryption set where the disk encryption set resides. This secondary disk encryption set is used to encrypt compute machines.	String, in the format `00000000-0000-0000-0000-000000000000`.
`platform.azure.defaultMachinePlatform.osDisk.diskSizeGB`	The Azure disk size for the VM.	Integer that represents the size of the disk in GB. The default is `128`.
`platform.azure.defaultMachinePlatform.osDisk.diskType`	Defines the type of disk.	`premium_LRS` or `standardSSD_LRS`. The default is `premium_LRS`.
`platform.azure.defaultMachinePlatform.type`	The Azure instance type for control plane and compute machines.	The Azure instance type.
`platform.azure.defaultMachinePlatform.zones`	The availability zones where the installation program creates compute and control plane machines.	String list.
`controlPlane.platform.azure.encryptionAtHost`	Enables host-level encryption for control plane machines. You can enable this encryption alongside user-managed server-side encryption. This feature encrypts temporary, ephemeral, cached and un-managed disks on the VM host. This is not a prerequisite for user-managed server-side encryption.	`true` or `false`. The default is `false`.
`controlPlane.platform.azure.osDisk.diskEncryptionSet.resourceGroup`	The name of the Azure resource group that contains the disk encryption set from the installation prerequisites. This resource group should be different than the resource group where you install the cluster to avoid deleting your Azure encryption key when the cluster is destroyed. This value is only necessary if you intend to install the cluster with user-managed disk encryption.	String, for example `production_encryption_resource_group`.
`controlPlane.platform.azure.osDisk.diskEncryptionSet.name`	The name of the disk encryption set that contains the encryption key from the installation prerequisites.	String, for example `production_disk_encryption_set`.
`controlPlane.platform.azure.osDisk.diskEncryptionSet.subscriptionId`	Defines the Azure subscription of the disk encryption set where the disk encryption set resides. This secondary disk encryption set is used to encrypt control plane machines.	String, in the format `00000000-0000-0000-0000-000000000000`.
`controlPlane.platform.azure.osDisk.diskSizeGB`	The Azure disk size for the VM.	Integer that represents the size of the disk in GB. The default is `1024`.
`controlPlane.platform.azure.osDisk.diskType`	Defines the type of disk.	`premium_LRS` or `standardSSD_LRS`. The default is `premium_LRS`.
`controlPlane.platform.azure.ultraSSDCapability`	Enables the use of Azure ultra disks for persistent storage on control plane machines. This requires that your Azure region and zone have ultra disks available.	`Enabled`, `Disabled`. The default is `Disabled`.
`controlPlane.platform.azure.vmNetworkingType`	Enables accelerated networking. Accelerated networking enables single root I/O virtualization (SR-IOV) to a VM, improving its networking performance. If instance type of control plane machines support `Accelerated` networking, by default, the installer enables `Accelerated` networking, otherwise the default networking type is `Basic`.	`Accelerated` or `Basic`.
`platform.azure.baseDomainResourceGroupName`	The name of the resource group that contains the DNS zone for your base domain.	String, for example `production_cluster`.
`platform.azure.resourceGroupName`	The name of an already existing resource group to install your cluster to. This resource group must be empty and only used for this specific cluster; the cluster components assume ownership of all resources in the resource group. If you limit the service principal scope of the installation program to this resource group, you must ensure all other resources used by the installation program in your environment have the necessary permissions, such as the public DNS zone and virtual network. Destroying the cluster by using the installation program deletes this resource group.	String, for example `existing_resource_group`.
`platform.azure.outboundType`	The outbound routing strategy used to connect your cluster to the internet. If you are using user-defined routing, you must have pre-existing networking available where the outbound routing has already been configured prior to installing a cluster. The installation program is not responsible for configuring user-defined routing.	`LoadBalancer` or `UserDefinedRouting`. The default is `LoadBalancer`.
`platform.azure.region`	The name of the Azure region that hosts your cluster.	Any valid region name, such as `centralus`.
`platform.azure.zone`	List of availability zones to place machines in. For high availability, specify at least two zones.	List of zones, for example `["1", "2", "3"]`.
`platform.azure.defaultMachinePlatform.ultraSSDCapability`	Enables the use of Azure ultra disks for persistent storage on control plane and compute machines. This requires that your Azure region and zone have ultra disks available.	`Enabled`, `Disabled`. The default is `Disabled`.
`platform.azure.networkResourceGroupName`	The name of the resource group that contains the existing VNet that you want to deploy your cluster to. This name cannot be the same as the `platform.azure.baseDomainResourceGroupName`.	String.
`platform.azure.virtualNetwork`	The name of the existing VNet that you want to deploy your cluster to.	String.
`platform.azure.controlPlaneSubnet`	The name of the existing subnet in your VNet that you want to deploy your control plane machines to.	Valid CIDR, for example `10.0.0.0/16`.
`platform.azure.computeSubnet`	The name of the existing subnet in your VNet that you want to deploy your compute machines to.	Valid CIDR, for example `10.0.0.0/16`.
`platform.azure.cloudName`	The name of the Azure cloud environment that is used to configure the Azure SDK with the appropriate Azure API endpoints. If empty, the default value `AzurePublicCloud` is used.	Any valid cloud environment, such as `AzurePublicCloud` or `AzureUSGovernmentCloud`.
`platform.azure.defaultMachinePlatform.vmNetworkingType`	Enables accelerated networking. Accelerated networking enables single root I/O virtualization (SR-IOV) to a VM, improving its networking performance.	`Accelerated` or `Basic`. If instance type of control plane and compute machines support `Accelerated` networking, by default, the installer enables `Accelerated` networking, otherwise the default networking type is `Basic`.

Note

You cannot customize Azure Availability Zones or Use tags to organize your Azure resources with an Azure cluster.

6.7.5.2. Minimum resource requirements for cluster installation

Each cluster machine must meet the following minimum requirements:

Table 6.10. Minimum resource requirements
Machine	Operating System	vCPU ^[1]	Virtual RAM	Storage	IOPS ^[2]
Bootstrap	RHCOS	4	16 GB	100 GB	300
Control plane	RHCOS	4	16 GB	100 GB	300
Compute	RHCOS, RHEL 8.6 and later ^[3]	2	8 GB	100 GB	300

One vCPU is equivalent to one physical core when simultaneous multithreading (SMT), or hyperthreading, is not enabled. When enabled, use the following formula to calculate the corresponding ratio: (threads per core × cores) × sockets = vCPUs.
OpenShift Container Platform and Kubernetes are sensitive to disk performance, and faster storage is recommended, particularly for etcd on the control plane nodes which require a 10 ms p99 fsync duration. Note that on many cloud platforms, storage size and IOPS scale together, so you might need to over-allocate storage volume to obtain sufficient performance.
As with all user-provisioned installations, if you choose to use RHEL compute machines in your cluster, you take responsibility for all operating system life cycle management and maintenance, including performing system updates, applying patches, and completing all other required tasks. Use of RHEL 7 compute machines is deprecated and has been removed in OpenShift Container Platform 4.10 and later.

Important

You are required to use Azure virtual machines that have the premiumIO parameter set to true.

If an instance type for your platform meets the minimum requirements for cluster machines, it is supported to use in OpenShift Container Platform.

Additional resources

Optimizing storage

6.7.5.3. Tested instance types for Azure

The following Microsoft Azure instance types have been tested with OpenShift Container Platform.

Example 6.2. Machine types

c4.*
c5.*
c5a.*
i3.*
m4.*
m5.*
m5a.*
m6a.*
m6i.*
r4.*
r5.*
r5a.*
r6i.*
t3.*
t3a.*

6.7.5.4. Sample customized install-config.yaml file for Azure

You can customize the install-config.yaml file to specify more details about your OpenShift Container Platform cluster’s platform or modify the values of the required parameters.

Important

This sample YAML file is provided for reference only. You must obtain your install-config.yaml file by using the installation program and modify it.

apiVersion: v1
baseDomain: example.com 1
controlPlane: 2
  hyperthreading: Enabled 3 4
  name: master
  platform:
    azure:
      encryptionAtHost: true
      ultraSSDCapability: Enabled
      osDisk:
        diskSizeGB: 1024 5
        diskType: Premium_LRS
        diskEncryptionSet:
          resourceGroup: disk_encryption_set_resource_group
          name: disk_encryption_set_name
          subscriptionId: secondary_subscription_id
      type: Standard_D8s_v3
  replicas: 3
compute: 6
- hyperthreading: Enabled 7
  name: worker
  platform:
    azure:
      ultraSSDCapability: Enabled
      type: Standard_D2s_v3
      encryptionAtHost: true
      osDisk:
        diskSizeGB: 512 8
        diskType: Standard_LRS
        diskEncryptionSet:
          resourceGroup: disk_encryption_set_resource_group
          name: disk_encryption_set_name
          subscriptionId: secondary_subscription_id
      zones: 9
      - "1"
      - "2"
      - "3"
  replicas: 5
metadata:
  name: test-cluster 10
networking: 11
  clusterNetwork:
  - cidr: 10.128.0.0/14
    hostPrefix: 23
  machineNetwork:
  - cidr: 10.0.0.0/16
  networkType: OpenShiftSDN
  serviceNetwork:
  - 172.30.0.0/16
platform:
  azure:
    defaultMachinePlatform:
      ultraSSDCapability: Enabled
    baseDomainResourceGroupName: resource_group 12
    region: centralus 13
    resourceGroupName: existing_resource_group 14
    outboundType: Loadbalancer
    cloudName: AzurePublicCloud
pullSecret: '{"auths": ...}' 15
fips: false 16
sshKey: ssh-ed25519 AAAA... 17

1 10 13 15: Required. The installation program prompts you for this value.
2 6 11: If you do not provide these parameters and values, the installation program provides the default value.
3 7: The controlPlane section is a single mapping, but the compute section is a sequence of mappings. To meet the requirements of the different data structures, the first line of the compute section must begin with a hyphen, -, and the first line of the controlPlane section must not. Only one control plane pool is used.
4: Whether to enable or disable simultaneous multithreading, or hyperthreading. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. You can disable it by setting the parameter value to Disabled. If you disable simultaneous multithreading in some cluster machines, you must disable it in all cluster machines.
Important
If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance. Use larger virtual machine types, such as Standard_D8s_v3, for your machines if you disable simultaneous multithreading.
5 8: You can specify the size of the disk to use in GB. Minimum recommendation for control plane nodes is 1024 GB.
9: Specify a list of zones to deploy your machines to. For high availability, specify at least two zones.
12: Specify the name of the resource group that contains the DNS zone for your base domain.
14: Specify the name of an already existing resource group to install your cluster to. If undefined, a new resource group is created for the cluster.
16: Whether to enable or disable FIPS mode. By default, FIPS mode is not enabled. If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead.
Important
To enable FIPS mode for your cluster, you must run the installation program from a Red Hat Enterprise Linux (RHEL) computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see Installing the system in FIPS mode. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on OpenShift Container Platform deployments on the x86_64 architecture.
17: You can optionally provide the sshKey value that you use to access the machines in your cluster.
Note
For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

6.7.5.5. Configuring the cluster-wide proxy during installation

Prerequisites

You have an existing install-config.yaml file.
You reviewed the sites that your cluster requires access to and determined whether any of them need to bypass the proxy. By default, all cluster egress traffic is proxied, including calls to hosting cloud provider APIs. You added sites to the Proxy object’s spec.noProxy field to bypass the proxy if necessary.
Note
The Proxy object status.noProxy field is populated with the values of the networking.machineNetwork[].cidr, networking.clusterNetwork[].cidr, and networking.serviceNetwork[] fields from your installation configuration.
For installations on Amazon Web Services (AWS), Google Cloud Platform (GCP), Microsoft Azure, and Red Hat OpenStack Platform (RHOSP), the Proxy object status.noProxy field is also populated with the instance metadata endpoint (169.254.169.254).

Procedure

Edit your install-config.yaml file and add the proxy settings. For example:
```
apiVersion: v1
baseDomain: my.domain.com
proxy:
  httpProxy: http://<username>:<pswd>@<ip>:<port> 1
  httpsProxy: https://<username>:<pswd>@<ip>:<port> 2
  noProxy: example.com 3
additionalTrustBundle: | 4
    -----BEGIN CERTIFICATE-----
    <MY_TRUSTED_CA_CERT>
    -----END CERTIFICATE-----
```
1
A proxy URL to use for creating HTTP connections outside the cluster. The URL scheme must be http.
2
A proxy URL to use for creating HTTPS connections outside the cluster.
3
A comma-separated list of destination domain names, IP addresses, or other network CIDRs to exclude from proxying. Preface a domain with . to match subdomains only. For example, .y.com matches x.y.com, but not y.com. Use * to bypass the proxy for all destinations.
4
If provided, the installation program generates a config map that is named user-ca-bundle in the openshift-config namespace that contains one or more additional CA certificates that are required for proxying HTTPS connections. The Cluster Network Operator then creates a trusted-ca-bundle config map that merges these contents with the Red Hat Enterprise Linux CoreOS (RHCOS) trust bundle, and this config map is referenced in the trustedCA field of the Proxy object. The additionalTrustBundle field is required unless the proxy’s identity certificate is signed by an authority from the RHCOS trust bundle.
Note
The installation program does not support the proxy readinessEndpoints field.
Note
If the installer times out, restart and then complete the deployment by using the wait-for command of the installer. For example:
```
$ ./openshift-install wait-for install-complete --log-level debug
```
Save the file and reference it when installing OpenShift Container Platform.

Note

Only the Proxy object named cluster is supported, and no additional proxies can be created.

6.7.6. Network configuration phases

There are two phases prior to OpenShift Container Platform installation where you can customize the network configuration.

Phase 1

You can customize the following network-related fields in the install-config.yaml file before you create the manifest files:

networking.networkType
networking.clusterNetwork
networking.serviceNetwork
networking.machineNetwork
For more information on these fields, refer to Installation configuration parameters.
Note
Set the networking.machineNetwork to match the CIDR that the preferred NIC resides in.
Important
The CIDR range 172.17.0.0/16 is reserved by libVirt. You cannot use this range or any range that overlaps with this range for any networks in your cluster.

Phase 2

After creating the manifest files by running openshift-install create manifests, you can define a customized Cluster Network Operator manifest with only the fields you want to modify. You can use the manifest to specify advanced network configuration.

You cannot override the values specified in phase 1 in the install-config.yaml file during phase 2. However, you can further customize the cluster network provider during phase 2.

6.7.7. Specifying advanced network configuration

You can use advanced network configuration for your cluster network provider to integrate your cluster into your existing network environment. You can specify advanced network configuration only before you install the cluster.

Important

Customizing your network configuration by modifying the OpenShift Container Platform manifest files created by the installation program is not supported. Applying a manifest file that you create, as in the following procedure, is supported.

Prerequisites

You have created the install-config.yaml file and completed any modifications to it.

Procedure

Change to the directory that contains the installation program and create the manifests:
```
$ ./openshift-install create manifests --dir <installation_directory> 1
```
1
<installation_directory> specifies the name of the directory that contains the install-config.yaml file for your cluster.
Create a stub manifest file for the advanced network configuration that is named cluster-network-03-config.yml in the <installation_directory>/manifests/ directory:
```
apiVersion: operator.openshift.io/v1
kind: Network
metadata:
  name: cluster
spec:
```

Specify the advanced network configuration for your cluster in the cluster-network-03-config.yml file, such as in the following examples:

Specify a different VXLAN port for the OpenShift SDN network provider

apiVersion: operator.openshift.io/v1
kind: Network
metadata:
  name: cluster
spec:
  defaultNetwork:
    openshiftSDNConfig:
      vxlanPort: 4800

Enable IPsec for the OVN-Kubernetes network provider

apiVersion: operator.openshift.io/v1
kind: Network
metadata:
  name: cluster
spec:
  defaultNetwork:
    ovnKubernetesConfig:
      ipsecConfig: {}

Optional: Back up the manifests/cluster-network-03-config.yml file. The installation program consumes the manifests/ directory when you create the Ignition config files.

6.7.8. Cluster Network Operator configuration

The configuration for the cluster network is specified as part of the Cluster Network Operator (CNO) configuration and stored in a custom resource (CR) object that is named cluster. The CR specifies the fields for the Network API in the operator.openshift.io API group.

The CNO configuration inherits the following fields during cluster installation from the Network API in the Network.config.openshift.io API group and these fields cannot be changed:

clusterNetwork: IP address pools from which pod IP addresses are allocated.
serviceNetwork: IP address pool for services.
defaultNetwork.type: Cluster network provider, such as OpenShift SDN or OVN-Kubernetes.

You can specify the cluster network provider configuration for your cluster by setting the fields for the defaultNetwork object in the CNO object named cluster.

6.7.8.1. Cluster Network Operator configuration object

The fields for the Cluster Network Operator (CNO) are described in the following table:

Table 6.11. Cluster Network Operator configuration object
Field	Type	Description
`metadata.name`	`string`	The name of the CNO object. This name is always `cluster`.
`spec.clusterNetwork`	`array`	A list specifying the blocks of IP addresses from which pod IP addresses are allocated and the subnet prefix length assigned to each individual node in the cluster. For example: spec: clusterNetwork: - cidr: 10.128.0.0/19 hostPrefix: 23 - cidr: 10.128.32.0/19 hostPrefix: 23 You can customize this field only in the `install-config.yaml` file before you create the manifests. The value is read-only in the manifest file.
`spec.serviceNetwork`	`array`	A block of IP addresses for services. The OpenShift SDN and OVN-Kubernetes Container Network Interface (CNI) network providers support only a single IP address block for the service network. For example: spec: serviceNetwork: - 172.30.0.0/14 You can customize this field only in the `install-config.yaml` file before you create the manifests. The value is read-only in the manifest file.
`spec.defaultNetwork`	`object`	Configures the Container Network Interface (CNI) cluster network provider for the cluster network.
`spec.kubeProxyConfig`	`object`	The fields for this object specify the kube-proxy configuration. If you are using the OVN-Kubernetes cluster network provider, the kube-proxy configuration has no effect.

defaultNetwork object configuration

The values for the defaultNetwork object are defined in the following table:

Table 6.12. defaultNetwork object
Field	Type	Description
`type`	`string`	Either `OpenShiftSDN` or `OVNKubernetes`. The cluster network provider is selected during installation. This value cannot be changed after cluster installation. Note OpenShift Container Platform uses the OpenShift SDN Container Network Interface (CNI) cluster network provider by default.
`openshiftSDNConfig`	`object`	This object is only valid for the OpenShift SDN cluster network provider.
`ovnKubernetesConfig`	`object`	This object is only valid for the OVN-Kubernetes cluster network provider.

Configuration for the OpenShift SDN CNI cluster network provider

The following table describes the configuration fields for the OpenShift SDN Container Network Interface (CNI) cluster network provider.

Table 6.13. openshiftSDNConfig object
Field	Type	Description
`mode`	`string`	Configures the network isolation mode for OpenShift SDN. The default value is `NetworkPolicy`. The values `Multitenant` and `Subnet` are available for backwards compatibility with OpenShift Container Platform 3.x but are not recommended. This value cannot be changed after cluster installation.
`mtu`	`integer`	The maximum transmission unit (MTU) for the VXLAN overlay network. This is detected automatically based on the MTU of the primary network interface. You do not normally need to override the detected MTU. If the auto-detected value is not what you expect it to be, confirm that the MTU on the primary network interface on your nodes is correct. You cannot use this option to change the MTU value of the primary network interface on the nodes. If your cluster requires different MTU values for different nodes, you must set this value to `50` less than the lowest MTU value in your cluster. For example, if some nodes in your cluster have an MTU of `9001`, and some have an MTU of `1500`, you must set this value to `1450`. This value cannot be changed after cluster installation.
`vxlanPort`	`integer`	The port to use for all VXLAN packets. The default value is `4789`. This value cannot be changed after cluster installation. If you are running in a virtualized environment with existing nodes that are part of another VXLAN network, then you might be required to change this. For example, when running an OpenShift SDN overlay on top of VMware NSX-T, you must select an alternate port for the VXLAN, because both SDNs use the same default VXLAN port number. On Amazon Web Services (AWS), you can select an alternate port for the VXLAN between port `9000` and port `9999`.

Example OpenShift SDN configuration

defaultNetwork:
  type: OpenShiftSDN
  openshiftSDNConfig:
    mode: NetworkPolicy
    mtu: 1450
    vxlanPort: 4789

Configuration for the OVN-Kubernetes CNI cluster network provider

The following table describes the configuration fields for the OVN-Kubernetes CNI cluster network provider.

Table 6.14. ovnKubernetesConfig object
Field	Type	Description
`mtu`	`integer`	The maximum transmission unit (MTU) for the Geneve (Generic Network Virtualization Encapsulation) overlay network. This is detected automatically based on the MTU of the primary network interface. You do not normally need to override the detected MTU. If the auto-detected value is not what you expect it to be, confirm that the MTU on the primary network interface on your nodes is correct. You cannot use this option to change the MTU value of the primary network interface on the nodes. If your cluster requires different MTU values for different nodes, you must set this value to `100` less than the lowest MTU value in your cluster. For example, if some nodes in your cluster have an MTU of `9001`, and some have an MTU of `1500`, you must set this value to `1400`.
`genevePort`	`integer`	The port to use for all Geneve packets. The default value is `6081`. This value cannot be changed after cluster installation.
`ipsecConfig`	`object`	Specify an empty object to enable IPsec encryption.
`policyAuditConfig`	`object`	Specify a configuration object for customizing network policy audit logging. If unset, the defaults audit log settings are used.
`gatewayConfig`	`object`	Optional: Specify a configuration object for customizing how egress traffic is sent to the node gateway. Note While migrating egress traffic, you can expect some disruption to workloads and service traffic until the Cluster Network Operator (CNO) successfully rolls out the changes.

Table 6.15. policyAuditConfig object
Field	Type	Description
`rateLimit`	integer	The maximum number of messages to generate every second per node. The default value is `20` messages per second.
`maxFileSize`	integer	The maximum size for the audit log in bytes. The default value is `50000000` or 50 MB.
`destination`	string	One of the following additional audit log targets: `libc` The libc `syslog()` function of the journald process on the host. `udp:<host>:<port>` A syslog server. Replace `<host>:<port>` with the host and port of the syslog server. `unix:<file>` A Unix Domain Socket file specified by `<file>`. `null` Do not send the audit logs to any additional target.
`syslogFacility`	string	The syslog facility, such as `kern`, as defined by RFC5424. The default value is `local0`.

Table 6.16. gatewayConfig object
Field	Type	Description
`routingViaHost`	`boolean`	Set this field to `true` to send egress traffic from pods to the host networking stack. For highly-specialized installations and applications that rely on manually configured routes in the kernel routing table, you might want to route egress traffic to the host networking stack. By default, egress traffic is processed in OVN to exit the cluster and is not affected by specialized routes in the kernel routing table. The default value is `false`. This field has an interaction with the Open vSwitch hardware offloading feature. If you set this field to `true`, you do not receive the performance benefits of the offloading because egress traffic is processed by the host networking stack.

Example OVN-Kubernetes configuration with IPSec enabled

defaultNetwork:
  type: OVNKubernetes
  ovnKubernetesConfig:
    mtu: 1400
    genevePort: 6081
    ipsecConfig: {}

kubeProxyConfig object configuration

The values for the kubeProxyConfig object are defined in the following table:

Table 6.17. kubeProxyConfig object
Field	Type	Description
`iptablesSyncPeriod`	`string`	The refresh period for `iptables` rules. The default value is `30s`. Valid suffixes include `s`, `m`, and `h` and are described in the Go `time` package documentation. Note Because of performance improvements introduced in OpenShift Container Platform 4.3 and greater, adjusting the `iptablesSyncPeriod` parameter is no longer necessary.
`proxyArguments.iptables-min-sync-period`	`array`	The minimum duration before refreshing `iptables` rules. This field ensures that the refresh does not happen too frequently. Valid suffixes include `s`, `m`, and `h` and are described in the Go `time` package. The default value is: kubeProxyConfig: proxyArguments: iptables-min-sync-period: - 0s

6.7.9. Configuring hybrid networking with OVN-Kubernetes

You can configure your cluster to use hybrid networking with OVN-Kubernetes. This allows a hybrid cluster that supports different node networking configurations. For example, this is necessary to run both Linux and Windows nodes in a cluster.

Important

You must configure hybrid networking with OVN-Kubernetes during the installation of your cluster. You cannot switch to hybrid networking after the installation process.

Prerequisites

You defined OVNKubernetes for the networking.networkType parameter in the install-config.yaml file. See the installation documentation for configuring OpenShift Container Platform network customizations on your chosen cloud provider for more information.

Procedure

Change to the directory that contains the installation program and create the manifests:
```
$ ./openshift-install create manifests --dir <installation_directory>
```
where:
<installation_directory>
Specifies the name of the directory that contains the install-config.yaml file for your cluster.
Create a stub manifest file for the advanced network configuration that is named cluster-network-03-config.yml in the <installation_directory>/manifests/ directory:
```
$ cat <<EOF > <installation_directory>/manifests/cluster-network-03-config.yml
apiVersion: operator.openshift.io/v1
kind: Network
metadata:
  name: cluster
spec:
EOF
```
where:
<installation_directory>
Specifies the directory name that contains the manifests/ directory for your cluster.
Open the cluster-network-03-config.yml file in an editor and configure OVN-Kubernetes with hybrid networking, such as in the following example:
Specify a hybrid networking configuration
```
apiVersion: operator.openshift.io/v1
kind: Network
metadata:
  name: cluster
spec:
  defaultNetwork:
    ovnKubernetesConfig:
      hybridOverlayConfig:
        hybridClusterNetwork: 1
        - cidr: 10.132.0.0/14
          hostPrefix: 23
        hybridOverlayVXLANPort: 9898 2
```
1
Specify the CIDR configuration used for nodes on the additional overlay network. The hybridClusterNetwork CIDR cannot overlap with the clusterNetwork CIDR.
2
Specify a custom VXLAN port for the additional overlay network. This is required for running Windows nodes in a cluster installed on vSphere, and must not be configured for any other cloud provider. The custom port can be any open port excluding the default 4789 port. For more information on this requirement, see the Microsoft documentation on Pod-to-pod connectivity between hosts is broken.
Note
Windows Server Long-Term Servicing Channel (LTSC): Windows Server 2019 is not supported on clusters with a custom hybridOverlayVXLANPort value because this Windows server version does not support selecting a custom VXLAN port.
Save the cluster-network-03-config.yml file and quit the text editor.
Optional: Back up the manifests/cluster-network-03-config.yml file. The installation program deletes the manifests/ directory when creating the cluster.

Note

For more information on using Linux and Windows nodes in the same cluster, see Understanding Windows container workloads.

Additional resources

For more details about Accelerated Networking, see Accelerated Networking for Microsoft Azure VMs.

6.7.10. Deploying the cluster

You can install OpenShift Container Platform on a compatible cloud platform.

Important

You can run the create cluster command of the installation program only once, during initial installation.

Prerequisites

Configure an account with the cloud platform that hosts your cluster.
Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.

Procedure

Change to the directory that contains the installation program and initialize the cluster deployment:
```
$ ./openshift-install create cluster --dir <installation_directory> \ 1
    --log-level=info 2
```
1
For <installation_directory>, specify the location of your customized ./install-config.yaml file.
2
To view different installation details, specify warn, debug, or error instead of info.
Note
If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

Verification

When the cluster deployment completes successfully:

The terminal displays directions for accessing your cluster, including a link to the web console and credentials for the kubeadmin user.
Credential information also outputs to <installation_directory>/.openshift_install.log.

Important

Do not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

Example output

...
INFO Install complete!
INFO To access the cluster as the system:admin user when using 'oc', run 'export KUBECONFIG=/home/myuser/install_dir/auth/kubeconfig'
INFO Access the OpenShift web-console here: https://console-openshift-console.apps.mycluster.example.com
INFO Login to the console with user: "kubeadmin", and password: "password"
INFO Time elapsed: 36m22s

Important

The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.
It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.

6.7.11. Finalizing user-managed encryption after installation

Procedure

Obtain the identity of the cluster resource group used by the installer:
1. If you specified an existing resource group in install-config.yaml, obtain its Azure identity by running the following command:
```
$ az identity list --resource-group "<existing_resource_group>"
```
2. If you did not specify a existing resource group in install-config.yaml, locate the resource group that the installer created, and then obtain its Azure identity by running the following commands:
```
$ az group list
```
```
$ az identity list --resource-group "<installer_created_resource_group>"
```
Grant a role assignment to the cluster resource group so that it can write to the Disk Encryption Set by running the following command:
```
$ az role assignment create --role "<privileged_role>" \1
    --assignee "<resource_group_identity>" 2
```
1
Specifies an Azure role that has read/write permissions to the disk encryption set. You can use the Owner role or a custom role with the necessary permissions.
2
Specifies the identity of the cluster resource group.
Obtain the id of the disk encryption set you created prior to installation by running the following command:
```
$ az disk-encryption-set show -n <disk_encryption_set_name> \1
     --resource-group <resource_group_name> 2
```
1
Specifies the name of the disk encryption set.
2
Specifies the resource group that contains the disk encryption set. The id is in the format of "/subscriptions/…/resourceGroups/…/providers/Microsoft.Compute/diskEncryptionSets/…".
Obtain the identity of the cluster service principal by running the following command:
```
$ az identity show -g <cluster_resource_group> \1
     -n <cluster_service_principal_name> \2
     --query principalId --out tsv
```
1
Specifies the name of the cluster resource group created by the installation program.
2
Specifies the name of the cluster service principal created by the installation program. The identity is in the format of 12345678-1234-1234-1234-1234567890.
Create a role assignment that grants the cluster service principal Contributor privileges to the disk encryption set by running the following command:
```
$ az role assignment create --assignee <cluster_service_principal_id> \1
     --role 'Contributor' \//
     --scope <disk_encryption_set_id> \2
```
1
Specifies the ID of the cluster service principal obtained in the previous step.
2
Specifies the ID of the disk encryption set.
Create a storage class that uses the user-managed disk encryption set:
1. Save the following storage class definition to a file, for example storage-class-definition.yaml:
```
kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
  name: managed-premium
provisioner: kubernetes.io/azure-disk
parameters:
  skuname: Premium_LRS
  kind: Managed
  diskEncryptionSetID: "<disk_encryption_set_ID>" 1
  resourceGroup: "<resource_group_name>" 2
reclaimPolicy: Delete
allowVolumeExpansion: true
volumeBindingMode: WaitForFirstConsumer
```
  1
  Specifies the ID of the disk encryption set that you created in the prerequisite steps, for example "/subscriptions/xxxxxx-xxxxx-xxxxx/resourceGroups/test-encryption/providers/Microsoft.Compute/diskEncryptionSets/disk-encryption-set-xxxxxx".
  2
  Specifies the name of the resource group used by the installer. This is the same resource group from the first step.
2. Create the storage class managed-premium from the file you created by running the following command:
```
$ oc create -f storage-class-definition.yaml
```
Select the managed-premium storage class when you create persistent volumes to use encrypted storage.

6.7.12. Installing the OpenShift CLI by downloading the binary

You can install the OpenShift CLI (oc) to interact with OpenShift Container Platform from a command-line interface. You can install oc on Linux, Windows, or macOS.

Important

If you installed an earlier version of oc, you cannot use it to complete all of the commands in OpenShift Container Platform 4.11. Download and install the new version of oc.

Installing the OpenShift CLI on Linux

You can install the OpenShift CLI (oc) binary on Linux by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the architecture in the Product Variant drop-down menu.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 Linux Client entry and save the file.
Unpack the archive:
```
$ tar xvf <file>
```
Place the oc binary in a directory that is on your PATH.
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
$ oc <command>
```

Installing the OpenShift CLI on Windows

You can install the OpenShift CLI (oc) binary on Windows by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 Windows Client entry and save the file.
Unzip the archive with a ZIP program.
Move the oc binary to a directory that is on your PATH.
To check your PATH, open the command prompt and execute the following command:
```
C:\> path
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
C:\> oc <command>
```

Installing the OpenShift CLI on macOS

You can install the OpenShift CLI (oc) binary on macOS by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 macOS Client entry and save the file.
Note
For macOS arm64, choose the OpenShift v4.11 macOS arm64 Client entry.
Unpack and unzip the archive.
Move the oc binary to a directory on your PATH.
To check your PATH, open a terminal and execute the following command:
```
$ echo $PATH
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
$ oc <command>
```

6.7.13. Logging in to the cluster by using the CLI

Prerequisites

You deployed an OpenShift Container Platform cluster.
You installed the oc CLI.

Procedure

Export the kubeadmin credentials:
```
$ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1
```
1
For <installation_directory>, specify the path to the directory that you stored the installation files in.
Verify you can run oc commands successfully using the exported configuration:
```
$ oc whoami
```
Example output
```
system:admin
```

Additional resources

See Accessing the web console for more details about accessing and understanding the OpenShift Container Platform web console.

6.7.14. Telemetry access for OpenShift Container Platform

Additional resources

See About remote health monitoring for more information about the Telemetry service

6.7.15. Next steps

Customize your cluster.
If necessary, you can opt out of remote health reporting.

6.8. Installing a cluster on Azure into an existing VNet

In OpenShift Container Platform version 4.11, you can install a cluster into an existing Azure Virtual Network (VNet) on Microsoft Azure. The installation program provisions the rest of the required infrastructure, which you can further customize. To customize the installation, you modify parameters in the install-config.yaml file before you install the cluster.

6.8.1. Prerequisites

You reviewed details about the OpenShift Container Platform installation and update processes.
You read the documentation on selecting a cluster installation method and preparing it for users.
You configured an Azure account to host the cluster and determined the tested and validated region to deploy the cluster to.
If you use a firewall, you configured it to allow the sites that your cluster requires access to.
If the cloud identity and access management (IAM) APIs are not accessible in your environment, or if you do not want to store an administrator-level credential secret in the kube-system namespace, you can manually create and maintain IAM credentials.
If you use customer-managed encryption keys, you prepared your Azure environment for encryption.

6.8.2. About reusing a VNet for your OpenShift Container Platform cluster

In OpenShift Container Platform 4.11, you can deploy a cluster into an existing Azure Virtual Network (VNet) in Microsoft Azure. If you do, you must also use existing subnets within the VNet and routing rules.

By deploying OpenShift Container Platform into an existing Azure VNet, you might be able to avoid service limit constraints in new accounts or more easily abide by the operational constraints that your company’s guidelines set. This is a good option to use if you cannot obtain the infrastructure creation permissions that are required to create the VNet.

6.8.2.1. Requirements for using your VNet

When you deploy a cluster by using an existing VNet, you must perform additional network configuration before you install the cluster. In installer-provisioned infrastructure clusters, the installer usually creates the following components, but it does not create them when you install into an existing VNet:

Subnets
Route tables
VNets
Network Security Groups

Note

The installation program requires that you use the cloud-provided DNS server. Using a custom DNS server is not supported and causes the installation to fail.

If you use a custom VNet, you must correctly configure it and its subnets for the installation program and the cluster to use. The installation program cannot subdivide network ranges for the cluster to use, set route tables for the subnets, or set VNet options like DHCP, so you must do so before you install the cluster.

The cluster must be able to access the resource group that contains the existing VNet and subnets. While all of the resources that the cluster creates are placed in a separate resource group that it creates, some network resources are used from a separate group. Some cluster Operators must be able to access resources in both resource groups. For example, the Machine API controller attaches NICS for the virtual machines that it creates to subnets from the networking resource group.

Your VNet must meet the following characteristics:

The VNet’s CIDR block must contain the Networking.MachineCIDR range, which is the IP address pool for cluster machines.
The VNet and its subnets must belong to the same resource group, and the subnets must be configured to use Azure-assigned DHCP IP addresses instead of static IP addresses.

You must provide two subnets within your VNet, one for the control plane machines and one for the compute machines. Because Azure distributes machines in different availability zones within the region that you specify, your cluster will have high availability by default.

Note

To ensure that the subnets that you provide are suitable, the installation program confirms the following data:

All the specified subnets exist.
There are two private subnets, one for the control plane machines and one for the compute machines.
The subnet CIDRs belong to the machine CIDR that you specified. Machines are not provisioned in availability zones that you do not provide private subnets for. If required, the installation program creates public load balancers that manage the control plane and worker nodes, and Azure allocates a public IP address to them.

Note

If you destroy a cluster that uses an existing VNet, the VNet is not deleted.

6.8.2.1.1. Network security group requirements

The network security groups for the subnets that host the compute and control plane machines require specific access to ensure that the cluster communication is correct. You must create rules to allow access to the required cluster communication ports.

Important

The network security group rules must be in place before you install the cluster. If you attempt to install a cluster without the required access, the installation program cannot reach the Azure APIs, and installation fails.

Table 6.18. Required ports
Port	Description	Control plane	Compute
`80`	Allows HTTP traffic		x
`443`	Allows HTTPS traffic		x
`6443`	Allows communication to the control plane machines	x
`22623`	Allows internal communication to the machine config server for provisioning machines	x

Important

Currently, there is no supported way to block or restrict the machine config server endpoint. The machine config server must be exposed to the network so that newly-provisioned machines, which have no existing configuration or state, are able to fetch their configuration. In this model, the root of trust is the certificate signing requests (CSR) endpoint, which is where the kubelet sends its certificate signing request for approval to join the cluster. Because of this, machine configs should not be used to distribute sensitive information, such as secrets and certificates.

To ensure that the machine config server endpoints, ports 22623 and 22624, are secured in bare metal scenarios, customers must configure proper network policies.

Because cluster components do not modify the user-provided network security groups, which the Kubernetes controllers update, a pseudo-network security group is created for the Kubernetes controller to modify without impacting the rest of the environment.

Additional resources

About the OpenShift SDN network plugin

6.8.2.2. Division of permissions

Starting with OpenShift Container Platform 4.3, you do not need all of the permissions that are required for an installation program-provisioned infrastructure cluster to deploy a cluster. This change mimics the division of permissions that you might have at your company: some individuals can create different resources in your clouds than others. For example, you might be able to create application-specific items, like instances, storage, and load balancers, but not networking-related components such as VNets, subnet, or ingress rules.

The Azure credentials that you use when you create your cluster do not need the networking permissions that are required to make VNets and core networking components within the VNet, such as subnets, routing tables, internet gateways, NAT, and VPN. You still need permission to make the application resources that the machines within the cluster require, such as load balancers, security groups, storage accounts, and nodes.

6.8.2.3. Isolation between clusters

Because the cluster is unable to modify network security groups in an existing subnet, there is no way to isolate clusters from each other on the VNet.

6.8.3. Internet access for OpenShift Container Platform

In OpenShift Container Platform 4.11, you require access to the internet to install your cluster.

You must have internet access to:

Access OpenShift Cluster Manager Hybrid Cloud Console to download the installation program and perform subscription management. If the cluster has internet access and you do not disable Telemetry, that service automatically entitles your cluster.
Access Quay.io to obtain the packages that are required to install your cluster.
Obtain the packages that are required to perform cluster updates.

Important

6.8.4. Generating a key pair for cluster node SSH access

Important

Do not skip this procedure in production environments, where disaster recovery and debugging is required.

Note

You must use a local key, not one that you configured with platform-specific approaches such as AWS key pairs.

Procedure

If you do not have an existing SSH key pair on your local machine to use for authentication onto your cluster nodes, create one. For example, on a computer that uses a Linux operating system, run the following command:
```
$ ssh-keygen -t ed25519 -N '' -f <path>/<file_name> 1
```
1
Specify the path and file name, such as ~/.ssh/id_ed25519, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.
Note
If you plan to install an OpenShift Container Platform cluster that uses FIPS validated or Modules In Process cryptographic libraries on the x86_64 architecture, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.
View the public SSH key:
```
$ cat <path>/<file_name>.pub
```
For example, run the following to view the ~/.ssh/id_ed25519.pub public key:
```
$ cat ~/.ssh/id_ed25519.pub
```
Add the SSH private key identity to the SSH agent for your local user, if it has not already been added. SSH agent management of the key is required for password-less SSH authentication onto your cluster nodes, or if you want to use the ./openshift-install gather command.
Note
On some distributions, default SSH private key identities such as ~/.ssh/id_rsa and ~/.ssh/id_dsa are managed automatically.
1. If the ssh-agent process is not already running for your local user, start it as a background task:
```
$ eval "$(ssh-agent -s)"
```
  Example output
```
Agent pid 31874
```
  Note
  If your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.
Add your SSH private key to the ssh-agent:
```
$ ssh-add <path>/<file_name> 1
```
1
Specify the path and file name for your SSH private key, such as ~/.ssh/id_ed25519
Example output
```
Identity added: /home/<you>/<path>/<file_name> (<computer_name>)
```

Next steps

When you install OpenShift Container Platform, provide the SSH public key to the installation program.

6.8.5. Obtaining the installation program

Before you install OpenShift Container Platform, download the installation file on a local computer.

Prerequisites

You have a computer that runs Linux or macOS, with 500 MB of local disk space.

Procedure

Access the Infrastructure Provider page on the OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.
Select your infrastructure provider.
Navigate to the page for your installation type, download the installation program that corresponds with your host operating system and architecture, and place the file in the directory where you will store the installation configuration files.
Important
The installation program creates several files on the computer that you use to install your cluster. You must keep the installation program and the files that the installation program creates after you finish installing the cluster. Both files are required to delete the cluster.
Important
Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. To remove your cluster, complete the OpenShift Container Platform uninstallation procedures for your specific cloud provider.
Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:
```
$ tar -xvf openshift-install-linux.tar.gz
```
Download your installation pull secret from the Red Hat OpenShift Cluster Manager. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

6.8.6. Creating the installation configuration file

You can customize the OpenShift Container Platform cluster you install on Microsoft Azure.

Prerequisites

Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.
Obtain service principal permissions at the subscription level.

Procedure

Create the install-config.yaml file.
1. Change to the directory that contains the installation program and run the following command:
```
$ ./openshift-install create install-config --dir <installation_directory> 1
```
  1
  For <installation_directory>, specify the directory name to store the files that the installation program creates.
  When specifying the directory:
  - Verify that the directory has the execute permission. This permission is required to run Terraform binaries under the installation directory.
  - Use an empty directory. Some installation assets, such as bootstrap X.509 certificates, have short expiration intervals, therefore you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.
2. At the prompts, provide the configuration details for your cloud:
  1. Optional: Select an SSH key to use to access your cluster machines.
    Note
    For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.
  2. Select azure as the platform to target.
  3. If you do not have a Microsoft Azure profile stored on your computer, specify the following Azure parameter values for your subscription and service principal:
    azure subscription id: The subscription ID to use for the cluster. Specify the id value in your account output.
    azure tenant id: The tenant ID. Specify the tenantId value in your account output.
    azure service principal client id: The value of the appId parameter for the service principal.
    azure service principal client secret: The value of the password parameter for the service principal.
  4. Select the region to deploy the cluster to.
  5. Select the base domain to deploy the cluster to. The base domain corresponds to the Azure DNS Zone that you created for your cluster.
  6. Enter a descriptive name for your cluster.
    Important
    All Azure resources that are available through public endpoints are subject to resource name restrictions, and you cannot create resources that use certain terms. For a list of terms that Azure restricts, see Resolve reserved resource name errors in the Azure documentation.
  7. Paste the pull secret from the Red Hat OpenShift Cluster Manager.
Modify the install-config.yaml file. You can find more information about the available parameters in the "Installation configuration parameters" section.
Back up the install-config.yaml file so that you can use it to install multiple clusters.
Important
The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

6.8.6.1. Installation configuration parameters

Note

After installation, you cannot modify these parameters in the install-config.yaml file.

6.8.6.1.1. Required configuration parameters

Required installation configuration parameters are described in the following table:

Table 6.19. Required parameters
Parameter	Description	Values
`apiVersion`	The API version for the `install-config.yaml` content. The current version is `v1`. The installer may also support older API versions.	String
`baseDomain`	The base domain of your cloud provider. The base domain is used to create routes to your OpenShift Container Platform cluster components. The full DNS name for your cluster is a combination of the `baseDomain` and `metadata.name` parameter values that uses the `<metadata.name>.<baseDomain>` format.	A fully-qualified domain or subdomain name, such as `example.com`.
`metadata`	Kubernetes resource `ObjectMeta`, from which only the `name` parameter is consumed.	Object
`metadata.name`	The name of the cluster. DNS records for the cluster are all subdomains of `{{.metadata.name}}.{{.baseDomain}}`.	String of lowercase letters, hyphens (`-`), and periods (`.`), such as `dev`.
`platform`	The configuration for the specific platform upon which to perform the installation: `alibabacloud`, `aws`, `baremetal`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `ovirt`, `vsphere`, or `{}`. For additional information about `platform.<platform>` parameters, consult the table for your specific platform that follows.	Object
`pullSecret`	Get a pull secret from the Red Hat OpenShift Cluster Manager to authenticate downloading container images for OpenShift Container Platform components from services such as Quay.io.	{ "auths":{ "cloud.openshift.com":{ "auth":"b3Blb=", "email":"you@example.com" }, "quay.io":{ "auth":"b3Blb=", "email":"you@example.com" } } }

6.8.6.1.2. Network configuration parameters

Only IPv4 addresses are supported.

Note

Table 6.20. Network parameters
Parameter	Description	Values
`networking`	The configuration for the cluster network.	Object Note You cannot modify parameters specified by the `networking` object after installation.
`networking.networkType`	The cluster network provider Container Network Interface (CNI) cluster network provider to install.	Either `OpenShiftSDN` or `OVNKubernetes`. `OpenShiftSDN` is a CNI provider for all-Linux networks. `OVNKubernetes` is a CNI provider for Linux networks and hybrid networks that contain both Linux and Windows servers. The default value is `OpenShiftSDN`.
`networking.clusterNetwork`	The IP address blocks for pods. The default value is `10.128.0.0/14` with a host prefix of `/23`. If you specify multiple IP address blocks, the blocks must not overlap.	An array of objects. For example: networking: clusterNetwork: - cidr: 10.128.0.0/14 hostPrefix: 23
`networking.clusterNetwork.cidr`	Required if you use `networking.clusterNetwork`. An IP address block. An IPv4 network.	An IP address block in Classless Inter-Domain Routing (CIDR) notation. The prefix length for an IPv4 block is between `0` and `32`.
`networking.clusterNetwork.hostPrefix`	The subnet prefix length to assign to each individual node. For example, if `hostPrefix` is set to `23` then each node is assigned a `/23` subnet out of the given `cidr`. A `hostPrefix` value of `23` provides 510 (2^(32 - 23) - 2) pod IP addresses.	A subnet prefix. The default value is `23`.
`networking.serviceNetwork`	The IP address block for services. The default value is `172.30.0.0/16`. The OpenShift SDN and OVN-Kubernetes network providers support only a single IP address block for the service network.	An array with an IP address block in CIDR format. For example: networking: serviceNetwork: - 172.30.0.0/16
`networking.machineNetwork`	The IP address blocks for machines. If you specify multiple IP address blocks, the blocks must not overlap.	An array of objects. For example: networking: machineNetwork: - cidr: 10.0.0.0/16
`networking.machineNetwork.cidr`	Required if you use `networking.machineNetwork`. An IP address block. The default value is `10.0.0.0/16` for all platforms other than libvirt. For libvirt, the default value is `192.168.126.0/24`.	An IP network block in CIDR notation. For example, `10.0.0.0/16`. Note Set the `networking.machineNetwork` to match the CIDR that the preferred NIC resides in.

6.8.6.1.3. Optional configuration parameters

Optional installation configuration parameters are described in the following table:

Table 6.21. Optional parameters
Parameter	Description	Values
`additionalTrustBundle`	A PEM-encoded X.509 certificate bundle that is added to the nodes' trusted certificate store. This trust bundle may also be used when a proxy has been configured.	String
`capabilities`	Controls the installation of optional core cluster components. You can reduce the footprint of your OpenShift Container Platform cluster by disabling optional components.	String array
`capabilities.baselineCapabilitySet`	Selects an initial set of optional capabilities to enable. Valid values are `None`, `v4.11` and `vCurrent`. `v4.11` enables the `baremetal` Operator, the `marketplace` Operator, and the `openshift-samples` content. `vCurrent` installs the recommended set of capabilities for the current version of OpenShift Container Platform. The default value is `vCurrent`.	String
`capabilities.additionalEnabledCapabilities`	Extends the set of optional capabilities beyond what you specify in `baselineCapabilitySet`. Valid values are `baremetal`, `marketplace` and `openshift-samples`. You may specify multiple capabilities in this parameter.	String array
`cgroupsV2`	Enables Linux control groups version 2 (cgroups v2) on specific nodes in your cluster. The OpenShift Container Platform process for enabling cgroups v2 disables all cgroup version 1 controllers and hierarchies. The OpenShift Container Platform cgroups version 2 feature is in Developer Preview and is not supported by Red Hat at this time.	`true`
`compute`	The configuration for the machines that comprise the compute nodes.	Array of `MachinePool` objects.
`compute.architecture`	Determines the instruction set architecture of the machines in the pool. Currently, clusters with varied architectures are not supported. All pools must specify the same architecture. Valid values are `amd64` (the default).	String
`compute.hyperthreading`	Whether to enable or disable simultaneous multithreading, or `hyperthreading`, on compute machines. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. Important If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.	`Enabled` or `Disabled`
`compute.name`	Required if you use `compute`. The name of the machine pool.	`worker`
`compute.platform`	Required if you use `compute`. Use this parameter to specify the cloud provider to host the worker machines. This parameter value must match the `controlPlane.platform` parameter value.	`alibabacloud`, `aws`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `ovirt`, `vsphere`, or `{}`
`compute.replicas`	The number of compute machines, which are also known as worker machines, to provision.	A positive integer greater than or equal to `2`. The default value is `3`.
`controlPlane`	The configuration for the machines that comprise the control plane.	Array of `MachinePool` objects.
`controlPlane.architecture`	Determines the instruction set architecture of the machines in the pool. Currently, clusters with varied architectures are not supported. All pools must specify the same architecture. Valid values are `amd64` (the default).	String
`controlPlane.hyperthreading`	Whether to enable or disable simultaneous multithreading, or `hyperthreading`, on control plane machines. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. Important If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.	`Enabled` or `Disabled`
`controlPlane.name`	Required if you use `controlPlane`. The name of the machine pool.	`master`
`controlPlane.platform`	Required if you use `controlPlane`. Use this parameter to specify the cloud provider that hosts the control plane machines. This parameter value must match the `compute.platform` parameter value.	`alibabacloud`, `aws`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `ovirt`, `vsphere`, or `{}`
`controlPlane.replicas`	The number of control plane machines to provision.	The only supported value is `3`, which is the default value.
`credentialsMode`	The Cloud Credential Operator (CCO) mode. If no mode is specified, the CCO dynamically tries to determine the capabilities of the provided credentials, with a preference for mint mode on the platforms where multiple modes are supported. Note Not all CCO modes are supported for all cloud providers. For more information on CCO modes, see the Cloud Credential Operator entry in the Cluster Operators reference content. Note If your AWS account has service control policies (SCP) enabled, you must configure the `credentialsMode` parameter to `Mint`, `Passthrough` or `Manual`.	`Mint`, `Passthrough`, `Manual` or an empty string (`""`).
`fips`	Enable or disable FIPS mode. The default is `false` (disabled). If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead. Important To enable FIPS mode for your cluster, you must run the installation program from a Red Hat Enterprise Linux (RHEL) computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see Installing the system in FIPS mode. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on OpenShift Container Platform deployments on the `x86_64` architecture. Note If you are using Azure File storage, you cannot enable FIPS mode.	`false` or `true`
`imageContentSources`	Sources and repositories for the release-image content.	Array of objects. Includes a `source` and, optionally, `mirrors`, as described in the following rows of this table.
`imageContentSources.source`	Required if you use `imageContentSources`. Specify the repository that users refer to, for example, in image pull specifications.	String
`imageContentSources.mirrors`	Specify one or more repositories that may also contain the same images.	Array of strings
`publish`	How to publish or expose the user-facing endpoints of your cluster, such as the Kubernetes API, OpenShift routes.	`Internal` or `External`. To deploy a private cluster, which cannot be accessed from the internet, set `publish` to `Internal`. The default value is `External`.
`sshKey`	The SSH key to authenticate access to your cluster machines. Note For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your `ssh-agent` process uses.	For example, `sshKey: ssh-ed25519 AAAA..`.

6.8.6.1.4. Additional Azure configuration parameters

Additional Azure configuration parameters are described in the following table.

Note

Table 6.22. Additional Azure parameters
Parameter	Description	Values
`compute.platform.azure.encryptionAtHost`	Enables host-level encryption for compute machines. You can enable this encryption alongside user-managed server-side encryption. This feature encrypts temporary, ephemeral, cached and un-managed disks on the VM host. This is not a prerequisite for user-managed server-side encryption.	`true` or `false`. The default is `false`.
`compute.platform.azure.osDisk.diskSizeGB`	The Azure disk size for the VM.	Integer that represents the size of the disk in GB. The default is `128`.
`compute.platform.azure.osDisk.diskType`	Defines the type of disk.	`standard_LRS`, `premium_LRS`, or `standardSSD_LRS`. The default is `premium_LRS`.
`compute.platform.azure.ultraSSDCapability`	Enables the use of Azure ultra disks for persistent storage on compute nodes. This requires that your Azure region and zone have ultra disks available.	`Enabled`, `Disabled`. The default is `Disabled`.
`compute.platform.azure.osDisk.diskEncryptionSet.resourceGroup`	The name of the Azure resource group that contains the disk encryption set from the installation prerequisites. This resource group should be different than the resource group where you install the cluster to avoid deleting your Azure encryption key when the cluster is destroyed. This value is only necessary if you intend to install the cluster with user-managed disk encryption.	String, for example `production_encryption_resource_group`.
`compute.platform.azure.osDisk.diskEncryptionSet.name`	The name of the disk encryption set that contains the encryption key from the installation prerequisites.	String, for example `production_disk_encryption_set`.
`compute.platform.azure.osDisk.diskEncryptionSet.subscriptionId`	Defines the Azure subscription of the disk encryption set where the disk encryption set resides. This secondary disk encryption set is used to encrypt compute machines.	String, in the format `00000000-0000-0000-0000-000000000000`.
`compute.platform.azure.vmNetworkingType`	Enables accelerated networking. Accelerated networking enables single root I/O virtualization (SR-IOV) to a VM, improving its networking performance. If instance type of compute machines support `Accelerated` networking, by default, the installer enables `Accelerated` networking, otherwise the default networking type is `Basic`.	`Accelerated` or `Basic`.
`compute.platform.azure.type`	Defines the Azure instance type for compute machines.	String
`compute.platform.azure.zones`	The availability zones where the installation program creates compute machines.	String list
`controlPlane.platform.azure.type`	Defines the Azure instance type for control plane machines.	String
`controlPlane.platform.azure.zones`	The availability zones where the installation program creates control plane machines.	String list
`platform.azure.defaultMachinePlatform.encryptionAtHost`	Enables host-level encryption for compute machines. You can enable this encryption alongside user-managed server-side encryption. This feature encrypts temporary, ephemeral, cached, and un-managed disks on the VM host. This parameter is not a prerequisite for user-managed server-side encryption.	`true` or `false`. The default is `false`.
`platform.azure.defaultMachinePlatform.osDisk.diskEncryptionSet.name`	The name of the disk encryption set that contains the encryption key from the installation prerequisites.	String, for example, `production_disk_encryption_set`.
`platform.azure.defaultMachinePlatform.osDisk.diskEncryptionSet.resourceGroup`	The name of the Azure resource group that contains the disk encryption set from the installation prerequisites. To avoid deleting your Azure encryption key when the cluster is destroyed, this resource group must be different from the resource group where you install the cluster. This value is necessary only if you intend to install the cluster with user-managed disk encryption.	String, for example, `production_encryption_resource_group`.
`platform.azure.defaultMachinePlatform.osDisk.diskEncryptionSet.subscriptionId`	Defines the Azure subscription of the disk encryption set where the disk encryption set resides. This secondary disk encryption set is used to encrypt compute machines.	String, in the format `00000000-0000-0000-0000-000000000000`.
`platform.azure.defaultMachinePlatform.osDisk.diskSizeGB`	The Azure disk size for the VM.	Integer that represents the size of the disk in GB. The default is `128`.
`platform.azure.defaultMachinePlatform.osDisk.diskType`	Defines the type of disk.	`premium_LRS` or `standardSSD_LRS`. The default is `premium_LRS`.
`platform.azure.defaultMachinePlatform.type`	The Azure instance type for control plane and compute machines.	The Azure instance type.
`platform.azure.defaultMachinePlatform.zones`	The availability zones where the installation program creates compute and control plane machines.	String list.
`controlPlane.platform.azure.encryptionAtHost`	Enables host-level encryption for control plane machines. You can enable this encryption alongside user-managed server-side encryption. This feature encrypts temporary, ephemeral, cached and un-managed disks on the VM host. This is not a prerequisite for user-managed server-side encryption.	`true` or `false`. The default is `false`.
`controlPlane.platform.azure.osDisk.diskEncryptionSet.resourceGroup`	The name of the Azure resource group that contains the disk encryption set from the installation prerequisites. This resource group should be different than the resource group where you install the cluster to avoid deleting your Azure encryption key when the cluster is destroyed. This value is only necessary if you intend to install the cluster with user-managed disk encryption.	String, for example `production_encryption_resource_group`.
`controlPlane.platform.azure.osDisk.diskEncryptionSet.name`	The name of the disk encryption set that contains the encryption key from the installation prerequisites.	String, for example `production_disk_encryption_set`.
`controlPlane.platform.azure.osDisk.diskEncryptionSet.subscriptionId`	Defines the Azure subscription of the disk encryption set where the disk encryption set resides. This secondary disk encryption set is used to encrypt control plane machines.	String, in the format `00000000-0000-0000-0000-000000000000`.
`controlPlane.platform.azure.osDisk.diskSizeGB`	The Azure disk size for the VM.	Integer that represents the size of the disk in GB. The default is `1024`.
`controlPlane.platform.azure.osDisk.diskType`	Defines the type of disk.	`premium_LRS` or `standardSSD_LRS`. The default is `premium_LRS`.
`controlPlane.platform.azure.ultraSSDCapability`	Enables the use of Azure ultra disks for persistent storage on control plane machines. This requires that your Azure region and zone have ultra disks available.	`Enabled`, `Disabled`. The default is `Disabled`.
`controlPlane.platform.azure.vmNetworkingType`	Enables accelerated networking. Accelerated networking enables single root I/O virtualization (SR-IOV) to a VM, improving its networking performance. If instance type of control plane machines support `Accelerated` networking, by default, the installer enables `Accelerated` networking, otherwise the default networking type is `Basic`.	`Accelerated` or `Basic`.
`platform.azure.baseDomainResourceGroupName`	The name of the resource group that contains the DNS zone for your base domain.	String, for example `production_cluster`.
`platform.azure.resourceGroupName`	The name of an already existing resource group to install your cluster to. This resource group must be empty and only used for this specific cluster; the cluster components assume ownership of all resources in the resource group. If you limit the service principal scope of the installation program to this resource group, you must ensure all other resources used by the installation program in your environment have the necessary permissions, such as the public DNS zone and virtual network. Destroying the cluster by using the installation program deletes this resource group.	String, for example `existing_resource_group`.
`platform.azure.outboundType`	The outbound routing strategy used to connect your cluster to the internet. If you are using user-defined routing, you must have pre-existing networking available where the outbound routing has already been configured prior to installing a cluster. The installation program is not responsible for configuring user-defined routing.	`LoadBalancer` or `UserDefinedRouting`. The default is `LoadBalancer`.
`platform.azure.region`	The name of the Azure region that hosts your cluster.	Any valid region name, such as `centralus`.
`platform.azure.zone`	List of availability zones to place machines in. For high availability, specify at least two zones.	List of zones, for example `["1", "2", "3"]`.
`platform.azure.defaultMachinePlatform.ultraSSDCapability`	Enables the use of Azure ultra disks for persistent storage on control plane and compute machines. This requires that your Azure region and zone have ultra disks available.	`Enabled`, `Disabled`. The default is `Disabled`.
`platform.azure.networkResourceGroupName`	The name of the resource group that contains the existing VNet that you want to deploy your cluster to. This name cannot be the same as the `platform.azure.baseDomainResourceGroupName`.	String.
`platform.azure.virtualNetwork`	The name of the existing VNet that you want to deploy your cluster to.	String.
`platform.azure.controlPlaneSubnet`	The name of the existing subnet in your VNet that you want to deploy your control plane machines to.	Valid CIDR, for example `10.0.0.0/16`.
`platform.azure.computeSubnet`	The name of the existing subnet in your VNet that you want to deploy your compute machines to.	Valid CIDR, for example `10.0.0.0/16`.
`platform.azure.cloudName`	The name of the Azure cloud environment that is used to configure the Azure SDK with the appropriate Azure API endpoints. If empty, the default value `AzurePublicCloud` is used.	Any valid cloud environment, such as `AzurePublicCloud` or `AzureUSGovernmentCloud`.
`platform.azure.defaultMachinePlatform.vmNetworkingType`	Enables accelerated networking. Accelerated networking enables single root I/O virtualization (SR-IOV) to a VM, improving its networking performance.	`Accelerated` or `Basic`. If instance type of control plane and compute machines support `Accelerated` networking, by default, the installer enables `Accelerated` networking, otherwise the default networking type is `Basic`.

Note

You cannot customize Azure Availability Zones or Use tags to organize your Azure resources with an Azure cluster.

6.8.6.2. Minimum resource requirements for cluster installation

Each cluster machine must meet the following minimum requirements:

Table 6.23. Minimum resource requirements
Machine	Operating System	vCPU ^[1]	Virtual RAM	Storage	IOPS ^[2]
Bootstrap	RHCOS	4	16 GB	100 GB	300
Control plane	RHCOS	4	16 GB	100 GB	300
Compute	RHCOS, RHEL 8.6 and later ^[3]	2	8 GB	100 GB	300

One vCPU is equivalent to one physical core when simultaneous multithreading (SMT), or hyperthreading, is not enabled. When enabled, use the following formula to calculate the corresponding ratio: (threads per core × cores) × sockets = vCPUs.
OpenShift Container Platform and Kubernetes are sensitive to disk performance, and faster storage is recommended, particularly for etcd on the control plane nodes which require a 10 ms p99 fsync duration. Note that on many cloud platforms, storage size and IOPS scale together, so you might need to over-allocate storage volume to obtain sufficient performance.
As with all user-provisioned installations, if you choose to use RHEL compute machines in your cluster, you take responsibility for all operating system life cycle management and maintenance, including performing system updates, applying patches, and completing all other required tasks. Use of RHEL 7 compute machines is deprecated and has been removed in OpenShift Container Platform 4.10 and later.

Important

You are required to use Azure virtual machines that have the premiumIO parameter set to true.

If an instance type for your platform meets the minimum requirements for cluster machines, it is supported to use in OpenShift Container Platform.

Additional resources

Optimizing storage

6.8.6.3. Tested instance types for Azure

The following Microsoft Azure instance types have been tested with OpenShift Container Platform.

Example 6.3. Machine types

c4.*
c5.*
c5a.*
i3.*
m4.*
m5.*
m5a.*
m6a.*
m6i.*
r4.*
r5.*
r5a.*
r6i.*
t3.*
t3a.*

6.8.6.4. Sample customized install-config.yaml file for Azure

You can customize the install-config.yaml file to specify more details about your OpenShift Container Platform cluster’s platform or modify the values of the required parameters.

Important

This sample YAML file is provided for reference only. You must obtain your install-config.yaml file by using the installation program and modify it.

apiVersion: v1
baseDomain: example.com 1
controlPlane: 2
  hyperthreading: Enabled 3 4
  name: master
  platform:
    azure:
      encryptionAtHost: true
      ultraSSDCapability: Enabled
      osDisk:
        diskSizeGB: 1024 5
        diskType: Premium_LRS
        diskEncryptionSet:
          resourceGroup: disk_encryption_set_resource_group
          name: disk_encryption_set_name
          subscriptionId: secondary_subscription_id
      type: Standard_D8s_v3
  replicas: 3
compute: 6
- hyperthreading: Enabled 7
  name: worker
  platform:
    azure:
      ultraSSDCapability: Enabled
      type: Standard_D2s_v3
      encryptionAtHost: true
      osDisk:
        diskSizeGB: 512 8
        diskType: Standard_LRS
        diskEncryptionSet:
          resourceGroup: disk_encryption_set_resource_group
          name: disk_encryption_set_name
          subscriptionId: secondary_subscription_id
      zones: 9
      - "1"
      - "2"
      - "3"
  replicas: 5
metadata:
  name: test-cluster 10
networking:
  clusterNetwork:
  - cidr: 10.128.0.0/14
    hostPrefix: 23
  machineNetwork:
  - cidr: 10.0.0.0/16
  networkType: OpenShiftSDN
  serviceNetwork:
  - 172.30.0.0/16
platform:
  azure:
    defaultMachinePlatform:
      ultraSSDCapability: Enabled
    baseDomainResourceGroupName: resource_group 11
    region: centralus 12
    resourceGroupName: existing_resource_group 13
    networkResourceGroupName: vnet_resource_group 14
    virtualNetwork: vnet 15
    controlPlaneSubnet: control_plane_subnet 16
    computeSubnet: compute_subnet 17
    outboundType: Loadbalancer
    cloudName: AzurePublicCloud
pullSecret: '{"auths": ...}' 18
fips: false 19
sshKey: ssh-ed25519 AAAA... 20

1 10 12 18: Required. The installation program prompts you for this value.
2 6: If you do not provide these parameters and values, the installation program provides the default value.
3 7: The controlPlane section is a single mapping, but the compute section is a sequence of mappings. To meet the requirements of the different data structures, the first line of the compute section must begin with a hyphen, -, and the first line of the controlPlane section must not. Only one control plane pool is used.
4: Whether to enable or disable simultaneous multithreading, or hyperthreading. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. You can disable it by setting the parameter value to Disabled. If you disable simultaneous multithreading in some cluster machines, you must disable it in all cluster machines.
Important
If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance. Use larger virtual machine types, such as Standard_D8s_v3, for your machines if you disable simultaneous multithreading.
5 8: You can specify the size of the disk to use in GB. Minimum recommendation for control plane nodes is 1024 GB.
9: Specify a list of zones to deploy your machines to. For high availability, specify at least two zones.
11: Specify the name of the resource group that contains the DNS zone for your base domain.
13: Specify the name of an already existing resource group to install your cluster to. If undefined, a new resource group is created for the cluster.
14: If you use an existing VNet, specify the name of the resource group that contains it.
15: If you use an existing VNet, specify its name.
16: If you use an existing VNet, specify the name of the subnet to host the control plane machines.
17: If you use an existing VNet, specify the name of the subnet to host the compute machines.
19: Whether to enable or disable FIPS mode. By default, FIPS mode is not enabled. If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead.
Important
To enable FIPS mode for your cluster, you must run the installation program from a Red Hat Enterprise Linux (RHEL) computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see Installing the system in FIPS mode. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on OpenShift Container Platform deployments on the x86_64 architecture.
20: You can optionally provide the sshKey value that you use to access the machines in your cluster.
Note
For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

6.8.6.5. Configuring the cluster-wide proxy during installation

Prerequisites

You have an existing install-config.yaml file.
You reviewed the sites that your cluster requires access to and determined whether any of them need to bypass the proxy. By default, all cluster egress traffic is proxied, including calls to hosting cloud provider APIs. You added sites to the Proxy object’s spec.noProxy field to bypass the proxy if necessary.
Note
The Proxy object status.noProxy field is populated with the values of the networking.machineNetwork[].cidr, networking.clusterNetwork[].cidr, and networking.serviceNetwork[] fields from your installation configuration.
For installations on Amazon Web Services (AWS), Google Cloud Platform (GCP), Microsoft Azure, and Red Hat OpenStack Platform (RHOSP), the Proxy object status.noProxy field is also populated with the instance metadata endpoint (169.254.169.254).

Procedure

Edit your install-config.yaml file and add the proxy settings. For example:
```
apiVersion: v1
baseDomain: my.domain.com
proxy:
  httpProxy: http://<username>:<pswd>@<ip>:<port> 1
  httpsProxy: https://<username>:<pswd>@<ip>:<port> 2
  noProxy: example.com 3
additionalTrustBundle: | 4
    -----BEGIN CERTIFICATE-----
    <MY_TRUSTED_CA_CERT>
    -----END CERTIFICATE-----
```
1
A proxy URL to use for creating HTTP connections outside the cluster. The URL scheme must be http.
2
A proxy URL to use for creating HTTPS connections outside the cluster.
3
A comma-separated list of destination domain names, IP addresses, or other network CIDRs to exclude from proxying. Preface a domain with . to match subdomains only. For example, .y.com matches x.y.com, but not y.com. Use * to bypass the proxy for all destinations.
4
If provided, the installation program generates a config map that is named user-ca-bundle in the openshift-config namespace that contains one or more additional CA certificates that are required for proxying HTTPS connections. The Cluster Network Operator then creates a trusted-ca-bundle config map that merges these contents with the Red Hat Enterprise Linux CoreOS (RHCOS) trust bundle, and this config map is referenced in the trustedCA field of the Proxy object. The additionalTrustBundle field is required unless the proxy’s identity certificate is signed by an authority from the RHCOS trust bundle.
Note
The installation program does not support the proxy readinessEndpoints field.
Note
If the installer times out, restart and then complete the deployment by using the wait-for command of the installer. For example:
```
$ ./openshift-install wait-for install-complete --log-level debug
```
Save the file and reference it when installing OpenShift Container Platform.

Note

Only the Proxy object named cluster is supported, and no additional proxies can be created.

Additional resources

For more details about Accelerated Networking, see Accelerated Networking for Microsoft Azure VMs.

6.8.7. Deploying the cluster

You can install OpenShift Container Platform on a compatible cloud platform.

Important

You can run the create cluster command of the installation program only once, during initial installation.

Prerequisites

Configure an account with the cloud platform that hosts your cluster.
Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.

Procedure

Change to the directory that contains the installation program and initialize the cluster deployment:
```
$ ./openshift-install create cluster --dir <installation_directory> \ 1
    --log-level=info 2
```
1
For <installation_directory>, specify the location of your customized ./install-config.yaml file.
2
To view different installation details, specify warn, debug, or error instead of info.
Note
If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

Verification

When the cluster deployment completes successfully:

The terminal displays directions for accessing your cluster, including a link to the web console and credentials for the kubeadmin user.
Credential information also outputs to <installation_directory>/.openshift_install.log.

Important

Do not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

Example output

...
INFO Install complete!
INFO To access the cluster as the system:admin user when using 'oc', run 'export KUBECONFIG=/home/myuser/install_dir/auth/kubeconfig'
INFO Access the OpenShift web-console here: https://console-openshift-console.apps.mycluster.example.com
INFO Login to the console with user: "kubeadmin", and password: "password"
INFO Time elapsed: 36m22s

Important

The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.
It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.

6.8.8. Finalizing user-managed encryption after installation

Procedure

Obtain the identity of the cluster resource group used by the installer:
1. If you specified an existing resource group in install-config.yaml, obtain its Azure identity by running the following command:
```
$ az identity list --resource-group "<existing_resource_group>"
```
2. If you did not specify a existing resource group in install-config.yaml, locate the resource group that the installer created, and then obtain its Azure identity by running the following commands:
```
$ az group list
```
```
$ az identity list --resource-group "<installer_created_resource_group>"
```
Grant a role assignment to the cluster resource group so that it can write to the Disk Encryption Set by running the following command:
```
$ az role assignment create --role "<privileged_role>" \1
    --assignee "<resource_group_identity>" 2
```
1
Specifies an Azure role that has read/write permissions to the disk encryption set. You can use the Owner role or a custom role with the necessary permissions.
2
Specifies the identity of the cluster resource group.
Obtain the id of the disk encryption set you created prior to installation by running the following command:
```
$ az disk-encryption-set show -n <disk_encryption_set_name> \1
     --resource-group <resource_group_name> 2
```
1
Specifies the name of the disk encryption set.
2
Specifies the resource group that contains the disk encryption set. The id is in the format of "/subscriptions/…/resourceGroups/…/providers/Microsoft.Compute/diskEncryptionSets/…".
Obtain the identity of the cluster service principal by running the following command:
```
$ az identity show -g <cluster_resource_group> \1
     -n <cluster_service_principal_name> \2
     --query principalId --out tsv
```
1
Specifies the name of the cluster resource group created by the installation program.
2
Specifies the name of the cluster service principal created by the installation program. The identity is in the format of 12345678-1234-1234-1234-1234567890.
Create a role assignment that grants the cluster service principal Contributor privileges to the disk encryption set by running the following command:
```
$ az role assignment create --assignee <cluster_service_principal_id> \1
     --role 'Contributor' \//
     --scope <disk_encryption_set_id> \2
```
1
Specifies the ID of the cluster service principal obtained in the previous step.
2
Specifies the ID of the disk encryption set.
Create a storage class that uses the user-managed disk encryption set:
1. Save the following storage class definition to a file, for example storage-class-definition.yaml:
```
kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
  name: managed-premium
provisioner: kubernetes.io/azure-disk
parameters:
  skuname: Premium_LRS
  kind: Managed
  diskEncryptionSetID: "<disk_encryption_set_ID>" 1
  resourceGroup: "<resource_group_name>" 2
reclaimPolicy: Delete
allowVolumeExpansion: true
volumeBindingMode: WaitForFirstConsumer
```
  1
  Specifies the ID of the disk encryption set that you created in the prerequisite steps, for example "/subscriptions/xxxxxx-xxxxx-xxxxx/resourceGroups/test-encryption/providers/Microsoft.Compute/diskEncryptionSets/disk-encryption-set-xxxxxx".
  2
  Specifies the name of the resource group used by the installer. This is the same resource group from the first step.
2. Create the storage class managed-premium from the file you created by running the following command:
```
$ oc create -f storage-class-definition.yaml
```
Select the managed-premium storage class when you create persistent volumes to use encrypted storage.

6.8.9. Installing the OpenShift CLI by downloading the binary

You can install the OpenShift CLI (oc) to interact with OpenShift Container Platform from a command-line interface. You can install oc on Linux, Windows, or macOS.

Important

If you installed an earlier version of oc, you cannot use it to complete all of the commands in OpenShift Container Platform 4.11. Download and install the new version of oc.

Installing the OpenShift CLI on Linux

You can install the OpenShift CLI (oc) binary on Linux by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the architecture in the Product Variant drop-down menu.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 Linux Client entry and save the file.
Unpack the archive:
```
$ tar xvf <file>
```
Place the oc binary in a directory that is on your PATH.
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
$ oc <command>
```

Installing the OpenShift CLI on Windows

You can install the OpenShift CLI (oc) binary on Windows by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 Windows Client entry and save the file.
Unzip the archive with a ZIP program.
Move the oc binary to a directory that is on your PATH.
To check your PATH, open the command prompt and execute the following command:
```
C:\> path
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
C:\> oc <command>
```

Installing the OpenShift CLI on macOS

You can install the OpenShift CLI (oc) binary on macOS by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 macOS Client entry and save the file.
Note
For macOS arm64, choose the OpenShift v4.11 macOS arm64 Client entry.
Unpack and unzip the archive.
Move the oc binary to a directory on your PATH.
To check your PATH, open a terminal and execute the following command:
```
$ echo $PATH
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
$ oc <command>
```

6.8.10. Logging in to the cluster by using the CLI

Prerequisites

You deployed an OpenShift Container Platform cluster.
You installed the oc CLI.

Procedure

Export the kubeadmin credentials:
```
$ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1
```
1
For <installation_directory>, specify the path to the directory that you stored the installation files in.
Verify you can run oc commands successfully using the exported configuration:
```
$ oc whoami
```
Example output
```
system:admin
```

Additional resources

See Accessing the web console for more details about accessing and understanding the OpenShift Container Platform web console.

6.8.11. Telemetry access for OpenShift Container Platform

Additional resources

See About remote health monitoring for more information about the Telemetry service

6.8.12. Next steps

Customize your cluster.
If necessary, you can opt out of remote health reporting.

6.9. Installing a private cluster on Azure

In OpenShift Container Platform version 4.11, you can install a private cluster into an existing Azure Virtual Network (VNet) on Microsoft Azure. The installation program provisions the rest of the required infrastructure, which you can further customize. To customize the installation, you modify parameters in the install-config.yaml file before you install the cluster.

6.9.1. Prerequisites

You reviewed details about the OpenShift Container Platform installation and update processes.
You read the documentation on selecting a cluster installation method and preparing it for users.
You configured an Azure account to host the cluster and determined the tested and validated region to deploy the cluster to.
If you use a firewall, you configured it to allow the sites that your cluster requires access to.
If the cloud identity and access management (IAM) APIs are not accessible in your environment, or if you do not want to store an administrator-level credential secret in the kube-system namespace, you can manually create and maintain IAM credentials.
If you use customer-managed encryption keys, you prepared your Azure environment for encryption.

6.9.2. Private clusters

You can deploy a private OpenShift Container Platform cluster that does not expose external endpoints. Private clusters are accessible from only an internal network and are not visible to the internet.

By default, OpenShift Container Platform is provisioned to use publicly-accessible DNS and endpoints. A private cluster sets the DNS, Ingress Controller, and API server to private when you deploy your cluster. This means that the cluster resources are only accessible from your internal network and are not visible to the internet.

Important

If the cluster has any public subnets, load balancer services created by administrators might be publicly accessible. To ensure cluster security, verify that these services are explicitly annotated as private.

To deploy a private cluster, you must:

Use existing networking that meets your requirements. Your cluster resources might be shared between other clusters on the network.
Deploy from a machine that has access to:
- The API services for the cloud to which you provision.
- The hosts on the network that you provision.
- The internet to obtain installation media.

You can use any machine that meets these access requirements and follows your company’s guidelines. For example, this machine can be a bastion host on your cloud network or a machine that has access to the network through a VPN.

6.9.2.1. Private clusters in Azure

To create a private cluster on Microsoft Azure, you must provide an existing private VNet and subnets to host the cluster. The installation program must also be able to resolve the DNS records that the cluster requires. The installation program configures the Ingress Operator and API server for only internal traffic.

Depending how your network connects to the private VNET, you might need to use a DNS forwarder to resolve the cluster’s private DNS records. The cluster’s machines use 168.63.129.16 internally for DNS resolution. For more information, see What is Azure Private DNS? and What is IP address 168.63.129.16? in the Azure documentation.

The cluster still requires access to internet to access the Azure APIs.

The following items are not required or created when you install a private cluster:

A BaseDomainResourceGroup, since the cluster does not create public records
Public IP addresses
Public DNS records

Public endpoints

The cluster is configured so that the Operators do not create public records for the cluster and all cluster machines are placed in the private subnets that you specify.

6.9.2.1.1. Limitations

Private clusters on Azure are subject to only the limitations that are associated with the use of an existing VNet.

6.9.2.2. User-defined outbound routing

In OpenShift Container Platform, you can choose your own outbound routing for a cluster to connect to the internet. This allows you to skip the creation of public IP addresses and the public load balancer.

You can configure user-defined routing by modifying parameters in the install-config.yaml file before installing your cluster. A pre-existing VNet is required to use outbound routing when installing a cluster; the installation program is not responsible for configuring this.

When configuring a cluster to use user-defined routing, the installation program does not create the following resources:

Outbound rules for access to the internet.
Public IPs for the public load balancer.
Kubernetes Service object to add the cluster machines to the public load balancer for outbound requests.

You must ensure the following items are available before setting user-defined routing:

Egress to the internet is possible to pull container images, unless using an OpenShift image registry mirror.
The cluster can access Azure APIs.
Various allowlist endpoints are configured. You can reference these endpoints in the Configuring your firewall section.

There are several pre-existing networking setups that are supported for internet access using user-defined routing.

Private cluster with network address translation

You can use Azure VNET network address translation (NAT) to provide outbound internet access for the subnets in your cluster. You can reference Create a NAT gateway using Azure CLI in the Azure documentation for configuration instructions.

When using a VNet setup with Azure NAT and user-defined routing configured, you can create a private cluster with no public endpoints.

Private cluster with Azure Firewall

You can use Azure Firewall to provide outbound routing for the VNet used to install the cluster. You can learn more about providing user-defined routing with Azure Firewall in the Azure documentation.

When using a VNet setup with Azure Firewall and user-defined routing configured, you can create a private cluster with no public endpoints.

Private cluster with a proxy configuration

You can use a proxy with user-defined routing to allow egress to the internet. You must ensure that cluster Operators do not access Azure APIs using a proxy; Operators must have access to Azure APIs outside of the proxy.

When using the default route table for subnets, with 0.0.0.0/0 populated automatically by Azure, all Azure API requests are routed over Azure’s internal network even though the IP addresses are public. As long as the Network Security Group rules allow egress to Azure API endpoints, proxies with user-defined routing configured allow you to create private clusters with no public endpoints.

Private cluster with no internet access

You can install a private network that restricts all access to the internet, except the Azure API. This is accomplished by mirroring the release image registry locally. Your cluster must have access to the following:

An OpenShift image registry mirror that allows for pulling container images
Access to Azure APIs

With these requirements available, you can use user-defined routing to create private clusters with no public endpoints.

6.9.3. About reusing a VNet for your OpenShift Container Platform cluster

6.9.3.1. Requirements for using your VNet

Subnets
Route tables
VNets
Network Security Groups

Note

The installation program requires that you use the cloud-provided DNS server. Using a custom DNS server is not supported and causes the installation to fail.

Your VNet must meet the following characteristics:

The VNet’s CIDR block must contain the Networking.MachineCIDR range, which is the IP address pool for cluster machines.
The VNet and its subnets must belong to the same resource group, and the subnets must be configured to use Azure-assigned DHCP IP addresses instead of static IP addresses.

Note

To ensure that the subnets that you provide are suitable, the installation program confirms the following data:

All the specified subnets exist.
There are two private subnets, one for the control plane machines and one for the compute machines.
The subnet CIDRs belong to the machine CIDR that you specified. Machines are not provisioned in availability zones that you do not provide private subnets for.

Note

If you destroy a cluster that uses an existing VNet, the VNet is not deleted.

6.9.3.1.1. Network security group requirements

Important

Table 6.24. Required ports
Port	Description	Control plane	Compute
`80`	Allows HTTP traffic		x
`443`	Allows HTTPS traffic		x
`6443`	Allows communication to the control plane machines	x
`22623`	Allows internal communication to the machine config server for provisioning machines	x

Important

To ensure that the machine config server endpoints, ports 22623 and 22624, are secured in bare metal scenarios, customers must configure proper network policies.

Additional resources

About the OpenShift SDN network plugin

6.9.3.2. Division of permissions

6.9.3.3. Isolation between clusters

Because the cluster is unable to modify network security groups in an existing subnet, there is no way to isolate clusters from each other on the VNet.

6.9.4. Internet access for OpenShift Container Platform

In OpenShift Container Platform 4.11, you require access to the internet to install your cluster.

You must have internet access to:

Access OpenShift Cluster Manager Hybrid Cloud Console to download the installation program and perform subscription management. If the cluster has internet access and you do not disable Telemetry, that service automatically entitles your cluster.
Access Quay.io to obtain the packages that are required to install your cluster.
Obtain the packages that are required to perform cluster updates.

Important

6.9.5. Generating a key pair for cluster node SSH access

Important

Do not skip this procedure in production environments, where disaster recovery and debugging is required.

Note

You must use a local key, not one that you configured with platform-specific approaches such as AWS key pairs.

Procedure

If you do not have an existing SSH key pair on your local machine to use for authentication onto your cluster nodes, create one. For example, on a computer that uses a Linux operating system, run the following command:
```
$ ssh-keygen -t ed25519 -N '' -f <path>/<file_name> 1
```
1
Specify the path and file name, such as ~/.ssh/id_ed25519, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.
Note
If you plan to install an OpenShift Container Platform cluster that uses FIPS validated or Modules In Process cryptographic libraries on the x86_64 architecture, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.
View the public SSH key:
```
$ cat <path>/<file_name>.pub
```
For example, run the following to view the ~/.ssh/id_ed25519.pub public key:
```
$ cat ~/.ssh/id_ed25519.pub
```
Add the SSH private key identity to the SSH agent for your local user, if it has not already been added. SSH agent management of the key is required for password-less SSH authentication onto your cluster nodes, or if you want to use the ./openshift-install gather command.
Note
On some distributions, default SSH private key identities such as ~/.ssh/id_rsa and ~/.ssh/id_dsa are managed automatically.
1. If the ssh-agent process is not already running for your local user, start it as a background task:
```
$ eval "$(ssh-agent -s)"
```
  Example output
```
Agent pid 31874
```
  Note
  If your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.
Add your SSH private key to the ssh-agent:
```
$ ssh-add <path>/<file_name> 1
```
1
Specify the path and file name for your SSH private key, such as ~/.ssh/id_ed25519
Example output
```
Identity added: /home/<you>/<path>/<file_name> (<computer_name>)
```

Next steps

When you install OpenShift Container Platform, provide the SSH public key to the installation program.

6.9.6. Obtaining the installation program

Before you install OpenShift Container Platform, download the installation file on a local computer.

Prerequisites

You have a computer that runs Linux or macOS, with 500 MB of local disk space.

Procedure

Access the Infrastructure Provider page on the OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.
Select your infrastructure provider.
Navigate to the page for your installation type, download the installation program that corresponds with your host operating system and architecture, and place the file in the directory where you will store the installation configuration files.
Important
The installation program creates several files on the computer that you use to install your cluster. You must keep the installation program and the files that the installation program creates after you finish installing the cluster. Both files are required to delete the cluster.
Important
Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. To remove your cluster, complete the OpenShift Container Platform uninstallation procedures for your specific cloud provider.
Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:
```
$ tar -xvf openshift-install-linux.tar.gz
```
Download your installation pull secret from the Red Hat OpenShift Cluster Manager. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

6.9.7. Manually creating the installation configuration file

For installations of a private OpenShift Container Platform cluster that are only accessible from an internal network and are not visible to the internet, you must manually generate your installation configuration file.

Prerequisites

You have an SSH public key on your local machine to provide to the installation program. The key will be used for SSH authentication onto your cluster nodes for debugging and disaster recovery.
You have obtained the OpenShift Container Platform installation program and the pull secret for your cluster.

Procedure

Create an installation directory to store your required installation assets in:
```
$ mkdir <installation_directory>
```
Important
You must create a directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.
Customize the sample install-config.yaml file template that is provided and save it in the <installation_directory>.
Note
You must name this configuration file install-config.yaml.
Note
For some platform types, you can alternatively run ./openshift-install create install-config --dir <installation_directory> to generate an install-config.yaml file. You can provide details about your cluster configuration at the prompts.
Back up the install-config.yaml file so that you can use it to install multiple clusters.
Important
The install-config.yaml file is consumed during the next step of the installation process. You must back it up now.

6.9.7.1. Installation configuration parameters

Note

After installation, you cannot modify these parameters in the install-config.yaml file.

6.9.7.1.1. Required configuration parameters

Required installation configuration parameters are described in the following table:

Table 6.25. Required parameters
Parameter	Description	Values
`apiVersion`	The API version for the `install-config.yaml` content. The current version is `v1`. The installer may also support older API versions.	String
`baseDomain`	The base domain of your cloud provider. The base domain is used to create routes to your OpenShift Container Platform cluster components. The full DNS name for your cluster is a combination of the `baseDomain` and `metadata.name` parameter values that uses the `<metadata.name>.<baseDomain>` format.	A fully-qualified domain or subdomain name, such as `example.com`.
`metadata`	Kubernetes resource `ObjectMeta`, from which only the `name` parameter is consumed.	Object
`metadata.name`	The name of the cluster. DNS records for the cluster are all subdomains of `{{.metadata.name}}.{{.baseDomain}}`.	String of lowercase letters, hyphens (`-`), and periods (`.`), such as `dev`.
`platform`	The configuration for the specific platform upon which to perform the installation: `alibabacloud`, `aws`, `baremetal`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `ovirt`, `vsphere`, or `{}`. For additional information about `platform.<platform>` parameters, consult the table for your specific platform that follows.	Object
`pullSecret`	Get a pull secret from the Red Hat OpenShift Cluster Manager to authenticate downloading container images for OpenShift Container Platform components from services such as Quay.io.	{ "auths":{ "cloud.openshift.com":{ "auth":"b3Blb=", "email":"you@example.com" }, "quay.io":{ "auth":"b3Blb=", "email":"you@example.com" } } }

6.9.7.1.2. Network configuration parameters

Only IPv4 addresses are supported.

Note

Table 6.26. Network parameters
Parameter	Description	Values
`networking`	The configuration for the cluster network.	Object Note You cannot modify parameters specified by the `networking` object after installation.
`networking.networkType`	The cluster network provider Container Network Interface (CNI) cluster network provider to install.	Either `OpenShiftSDN` or `OVNKubernetes`. `OpenShiftSDN` is a CNI provider for all-Linux networks. `OVNKubernetes` is a CNI provider for Linux networks and hybrid networks that contain both Linux and Windows servers. The default value is `OpenShiftSDN`.
`networking.clusterNetwork`	The IP address blocks for pods. The default value is `10.128.0.0/14` with a host prefix of `/23`. If you specify multiple IP address blocks, the blocks must not overlap.	An array of objects. For example: networking: clusterNetwork: - cidr: 10.128.0.0/14 hostPrefix: 23
`networking.clusterNetwork.cidr`	Required if you use `networking.clusterNetwork`. An IP address block. An IPv4 network.	An IP address block in Classless Inter-Domain Routing (CIDR) notation. The prefix length for an IPv4 block is between `0` and `32`.
`networking.clusterNetwork.hostPrefix`	The subnet prefix length to assign to each individual node. For example, if `hostPrefix` is set to `23` then each node is assigned a `/23` subnet out of the given `cidr`. A `hostPrefix` value of `23` provides 510 (2^(32 - 23) - 2) pod IP addresses.	A subnet prefix. The default value is `23`.
`networking.serviceNetwork`	The IP address block for services. The default value is `172.30.0.0/16`. The OpenShift SDN and OVN-Kubernetes network providers support only a single IP address block for the service network.	An array with an IP address block in CIDR format. For example: networking: serviceNetwork: - 172.30.0.0/16
`networking.machineNetwork`	The IP address blocks for machines. If you specify multiple IP address blocks, the blocks must not overlap.	An array of objects. For example: networking: machineNetwork: - cidr: 10.0.0.0/16
`networking.machineNetwork.cidr`	Required if you use `networking.machineNetwork`. An IP address block. The default value is `10.0.0.0/16` for all platforms other than libvirt. For libvirt, the default value is `192.168.126.0/24`.	An IP network block in CIDR notation. For example, `10.0.0.0/16`. Note Set the `networking.machineNetwork` to match the CIDR that the preferred NIC resides in.

6.9.7.1.3. Optional configuration parameters

Optional installation configuration parameters are described in the following table:

Table 6.27. Optional parameters
Parameter	Description	Values
`additionalTrustBundle`	A PEM-encoded X.509 certificate bundle that is added to the nodes' trusted certificate store. This trust bundle may also be used when a proxy has been configured.	String
`capabilities`	Controls the installation of optional core cluster components. You can reduce the footprint of your OpenShift Container Platform cluster by disabling optional components.	String array
`capabilities.baselineCapabilitySet`	Selects an initial set of optional capabilities to enable. Valid values are `None`, `v4.11` and `vCurrent`. `v4.11` enables the `baremetal` Operator, the `marketplace` Operator, and the `openshift-samples` content. `vCurrent` installs the recommended set of capabilities for the current version of OpenShift Container Platform. The default value is `vCurrent`.	String
`capabilities.additionalEnabledCapabilities`	Extends the set of optional capabilities beyond what you specify in `baselineCapabilitySet`. Valid values are `baremetal`, `marketplace` and `openshift-samples`. You may specify multiple capabilities in this parameter.	String array
`cgroupsV2`	Enables Linux control groups version 2 (cgroups v2) on specific nodes in your cluster. The OpenShift Container Platform process for enabling cgroups v2 disables all cgroup version 1 controllers and hierarchies. The OpenShift Container Platform cgroups version 2 feature is in Developer Preview and is not supported by Red Hat at this time.	`true`
`compute`	The configuration for the machines that comprise the compute nodes.	Array of `MachinePool` objects.
`compute.architecture`	Determines the instruction set architecture of the machines in the pool. Currently, clusters with varied architectures are not supported. All pools must specify the same architecture. Valid values are `amd64` (the default).	String
`compute.hyperthreading`	Whether to enable or disable simultaneous multithreading, or `hyperthreading`, on compute machines. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. Important If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.	`Enabled` or `Disabled`
`compute.name`	Required if you use `compute`. The name of the machine pool.	`worker`
`compute.platform`	Required if you use `compute`. Use this parameter to specify the cloud provider to host the worker machines. This parameter value must match the `controlPlane.platform` parameter value.	`alibabacloud`, `aws`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `ovirt`, `vsphere`, or `{}`
`compute.replicas`	The number of compute machines, which are also known as worker machines, to provision.	A positive integer greater than or equal to `2`. The default value is `3`.
`controlPlane`	The configuration for the machines that comprise the control plane.	Array of `MachinePool` objects.
`controlPlane.architecture`	Determines the instruction set architecture of the machines in the pool. Currently, clusters with varied architectures are not supported. All pools must specify the same architecture. Valid values are `amd64` (the default).	String
`controlPlane.hyperthreading`	Whether to enable or disable simultaneous multithreading, or `hyperthreading`, on control plane machines. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. Important If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.	`Enabled` or `Disabled`
`controlPlane.name`	Required if you use `controlPlane`. The name of the machine pool.	`master`
`controlPlane.platform`	Required if you use `controlPlane`. Use this parameter to specify the cloud provider that hosts the control plane machines. This parameter value must match the `compute.platform` parameter value.	`alibabacloud`, `aws`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `ovirt`, `vsphere`, or `{}`
`controlPlane.replicas`	The number of control plane machines to provision.	The only supported value is `3`, which is the default value.
`credentialsMode`	The Cloud Credential Operator (CCO) mode. If no mode is specified, the CCO dynamically tries to determine the capabilities of the provided credentials, with a preference for mint mode on the platforms where multiple modes are supported. Note Not all CCO modes are supported for all cloud providers. For more information on CCO modes, see the Cloud Credential Operator entry in the Cluster Operators reference content. Note If your AWS account has service control policies (SCP) enabled, you must configure the `credentialsMode` parameter to `Mint`, `Passthrough` or `Manual`.	`Mint`, `Passthrough`, `Manual` or an empty string (`""`).
`fips`	Enable or disable FIPS mode. The default is `false` (disabled). If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead. Important To enable FIPS mode for your cluster, you must run the installation program from a Red Hat Enterprise Linux (RHEL) computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see Installing the system in FIPS mode. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on OpenShift Container Platform deployments on the `x86_64` architecture. Note If you are using Azure File storage, you cannot enable FIPS mode.	`false` or `true`
`imageContentSources`	Sources and repositories for the release-image content.	Array of objects. Includes a `source` and, optionally, `mirrors`, as described in the following rows of this table.
`imageContentSources.source`	Required if you use `imageContentSources`. Specify the repository that users refer to, for example, in image pull specifications.	String
`imageContentSources.mirrors`	Specify one or more repositories that may also contain the same images.	Array of strings
`publish`	How to publish or expose the user-facing endpoints of your cluster, such as the Kubernetes API, OpenShift routes.	`Internal` or `External`. To deploy a private cluster, which cannot be accessed from the internet, set `publish` to `Internal`. The default value is `External`.
`sshKey`	The SSH key to authenticate access to your cluster machines. Note For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your `ssh-agent` process uses.	For example, `sshKey: ssh-ed25519 AAAA..`.

6.9.7.1.4. Additional Azure configuration parameters

Additional Azure configuration parameters are described in the following table.

Note

Table 6.28. Additional Azure parameters
Parameter	Description	Values
`compute.platform.azure.encryptionAtHost`	Enables host-level encryption for compute machines. You can enable this encryption alongside user-managed server-side encryption. This feature encrypts temporary, ephemeral, cached and un-managed disks on the VM host. This is not a prerequisite for user-managed server-side encryption.	`true` or `false`. The default is `false`.
`compute.platform.azure.osDisk.diskSizeGB`	The Azure disk size for the VM.	Integer that represents the size of the disk in GB. The default is `128`.
`compute.platform.azure.osDisk.diskType`	Defines the type of disk.	`standard_LRS`, `premium_LRS`, or `standardSSD_LRS`. The default is `premium_LRS`.
`compute.platform.azure.ultraSSDCapability`	Enables the use of Azure ultra disks for persistent storage on compute nodes. This requires that your Azure region and zone have ultra disks available.	`Enabled`, `Disabled`. The default is `Disabled`.
`compute.platform.azure.osDisk.diskEncryptionSet.resourceGroup`	The name of the Azure resource group that contains the disk encryption set from the installation prerequisites. This resource group should be different than the resource group where you install the cluster to avoid deleting your Azure encryption key when the cluster is destroyed. This value is only necessary if you intend to install the cluster with user-managed disk encryption.	String, for example `production_encryption_resource_group`.
`compute.platform.azure.osDisk.diskEncryptionSet.name`	The name of the disk encryption set that contains the encryption key from the installation prerequisites.	String, for example `production_disk_encryption_set`.
`compute.platform.azure.osDisk.diskEncryptionSet.subscriptionId`	Defines the Azure subscription of the disk encryption set where the disk encryption set resides. This secondary disk encryption set is used to encrypt compute machines.	String, in the format `00000000-0000-0000-0000-000000000000`.
`compute.platform.azure.vmNetworkingType`	Enables accelerated networking. Accelerated networking enables single root I/O virtualization (SR-IOV) to a VM, improving its networking performance. If instance type of compute machines support `Accelerated` networking, by default, the installer enables `Accelerated` networking, otherwise the default networking type is `Basic`.	`Accelerated` or `Basic`.
`compute.platform.azure.type`	Defines the Azure instance type for compute machines.	String
`compute.platform.azure.zones`	The availability zones where the installation program creates compute machines.	String list
`controlPlane.platform.azure.type`	Defines the Azure instance type for control plane machines.	String
`controlPlane.platform.azure.zones`	The availability zones where the installation program creates control plane machines.	String list
`platform.azure.defaultMachinePlatform.encryptionAtHost`	Enables host-level encryption for compute machines. You can enable this encryption alongside user-managed server-side encryption. This feature encrypts temporary, ephemeral, cached, and un-managed disks on the VM host. This parameter is not a prerequisite for user-managed server-side encryption.	`true` or `false`. The default is `false`.
`platform.azure.defaultMachinePlatform.osDisk.diskEncryptionSet.name`	The name of the disk encryption set that contains the encryption key from the installation prerequisites.	String, for example, `production_disk_encryption_set`.
`platform.azure.defaultMachinePlatform.osDisk.diskEncryptionSet.resourceGroup`	The name of the Azure resource group that contains the disk encryption set from the installation prerequisites. To avoid deleting your Azure encryption key when the cluster is destroyed, this resource group must be different from the resource group where you install the cluster. This value is necessary only if you intend to install the cluster with user-managed disk encryption.	String, for example, `production_encryption_resource_group`.
`platform.azure.defaultMachinePlatform.osDisk.diskEncryptionSet.subscriptionId`	Defines the Azure subscription of the disk encryption set where the disk encryption set resides. This secondary disk encryption set is used to encrypt compute machines.	String, in the format `00000000-0000-0000-0000-000000000000`.
`platform.azure.defaultMachinePlatform.osDisk.diskSizeGB`	The Azure disk size for the VM.	Integer that represents the size of the disk in GB. The default is `128`.
`platform.azure.defaultMachinePlatform.osDisk.diskType`	Defines the type of disk.	`premium_LRS` or `standardSSD_LRS`. The default is `premium_LRS`.
`platform.azure.defaultMachinePlatform.type`	The Azure instance type for control plane and compute machines.	The Azure instance type.
`platform.azure.defaultMachinePlatform.zones`	The availability zones where the installation program creates compute and control plane machines.	String list.
`controlPlane.platform.azure.encryptionAtHost`	Enables host-level encryption for control plane machines. You can enable this encryption alongside user-managed server-side encryption. This feature encrypts temporary, ephemeral, cached and un-managed disks on the VM host. This is not a prerequisite for user-managed server-side encryption.	`true` or `false`. The default is `false`.
`controlPlane.platform.azure.osDisk.diskEncryptionSet.resourceGroup`	The name of the Azure resource group that contains the disk encryption set from the installation prerequisites. This resource group should be different than the resource group where you install the cluster to avoid deleting your Azure encryption key when the cluster is destroyed. This value is only necessary if you intend to install the cluster with user-managed disk encryption.	String, for example `production_encryption_resource_group`.
`controlPlane.platform.azure.osDisk.diskEncryptionSet.name`	The name of the disk encryption set that contains the encryption key from the installation prerequisites.	String, for example `production_disk_encryption_set`.
`controlPlane.platform.azure.osDisk.diskEncryptionSet.subscriptionId`	Defines the Azure subscription of the disk encryption set where the disk encryption set resides. This secondary disk encryption set is used to encrypt control plane machines.	String, in the format `00000000-0000-0000-0000-000000000000`.
`controlPlane.platform.azure.osDisk.diskSizeGB`	The Azure disk size for the VM.	Integer that represents the size of the disk in GB. The default is `1024`.
`controlPlane.platform.azure.osDisk.diskType`	Defines the type of disk.	`premium_LRS` or `standardSSD_LRS`. The default is `premium_LRS`.
`controlPlane.platform.azure.ultraSSDCapability`	Enables the use of Azure ultra disks for persistent storage on control plane machines. This requires that your Azure region and zone have ultra disks available.	`Enabled`, `Disabled`. The default is `Disabled`.
`controlPlane.platform.azure.vmNetworkingType`	Enables accelerated networking. Accelerated networking enables single root I/O virtualization (SR-IOV) to a VM, improving its networking performance. If instance type of control plane machines support `Accelerated` networking, by default, the installer enables `Accelerated` networking, otherwise the default networking type is `Basic`.	`Accelerated` or `Basic`.
`platform.azure.baseDomainResourceGroupName`	The name of the resource group that contains the DNS zone for your base domain.	String, for example `production_cluster`.
`platform.azure.resourceGroupName`	The name of an already existing resource group to install your cluster to. This resource group must be empty and only used for this specific cluster; the cluster components assume ownership of all resources in the resource group. If you limit the service principal scope of the installation program to this resource group, you must ensure all other resources used by the installation program in your environment have the necessary permissions, such as the public DNS zone and virtual network. Destroying the cluster by using the installation program deletes this resource group.	String, for example `existing_resource_group`.
`platform.azure.outboundType`	The outbound routing strategy used to connect your cluster to the internet. If you are using user-defined routing, you must have pre-existing networking available where the outbound routing has already been configured prior to installing a cluster. The installation program is not responsible for configuring user-defined routing.	`LoadBalancer` or `UserDefinedRouting`. The default is `LoadBalancer`.
`platform.azure.region`	The name of the Azure region that hosts your cluster.	Any valid region name, such as `centralus`.
`platform.azure.zone`	List of availability zones to place machines in. For high availability, specify at least two zones.	List of zones, for example `["1", "2", "3"]`.
`platform.azure.defaultMachinePlatform.ultraSSDCapability`	Enables the use of Azure ultra disks for persistent storage on control plane and compute machines. This requires that your Azure region and zone have ultra disks available.	`Enabled`, `Disabled`. The default is `Disabled`.
`platform.azure.networkResourceGroupName`	The name of the resource group that contains the existing VNet that you want to deploy your cluster to. This name cannot be the same as the `platform.azure.baseDomainResourceGroupName`.	String.
`platform.azure.virtualNetwork`	The name of the existing VNet that you want to deploy your cluster to.	String.
`platform.azure.controlPlaneSubnet`	The name of the existing subnet in your VNet that you want to deploy your control plane machines to.	Valid CIDR, for example `10.0.0.0/16`.
`platform.azure.computeSubnet`	The name of the existing subnet in your VNet that you want to deploy your compute machines to.	Valid CIDR, for example `10.0.0.0/16`.
`platform.azure.cloudName`	The name of the Azure cloud environment that is used to configure the Azure SDK with the appropriate Azure API endpoints. If empty, the default value `AzurePublicCloud` is used.	Any valid cloud environment, such as `AzurePublicCloud` or `AzureUSGovernmentCloud`.
`platform.azure.defaultMachinePlatform.vmNetworkingType`	Enables accelerated networking. Accelerated networking enables single root I/O virtualization (SR-IOV) to a VM, improving its networking performance.	`Accelerated` or `Basic`. If instance type of control plane and compute machines support `Accelerated` networking, by default, the installer enables `Accelerated` networking, otherwise the default networking type is `Basic`.

Note

You cannot customize Azure Availability Zones or Use tags to organize your Azure resources with an Azure cluster.

6.9.7.2. Minimum resource requirements for cluster installation

Each cluster machine must meet the following minimum requirements:

Table 6.29. Minimum resource requirements
Machine	Operating System	vCPU ^[1]	Virtual RAM	Storage	IOPS ^[2]
Bootstrap	RHCOS	4	16 GB	100 GB	300
Control plane	RHCOS	4	16 GB	100 GB	300
Compute	RHCOS, RHEL 8.6 and later ^[3]	2	8 GB	100 GB	300

One vCPU is equivalent to one physical core when simultaneous multithreading (SMT), or hyperthreading, is not enabled. When enabled, use the following formula to calculate the corresponding ratio: (threads per core × cores) × sockets = vCPUs.
OpenShift Container Platform and Kubernetes are sensitive to disk performance, and faster storage is recommended, particularly for etcd on the control plane nodes which require a 10 ms p99 fsync duration. Note that on many cloud platforms, storage size and IOPS scale together, so you might need to over-allocate storage volume to obtain sufficient performance.
As with all user-provisioned installations, if you choose to use RHEL compute machines in your cluster, you take responsibility for all operating system life cycle management and maintenance, including performing system updates, applying patches, and completing all other required tasks. Use of RHEL 7 compute machines is deprecated and has been removed in OpenShift Container Platform 4.10 and later.

Important

You are required to use Azure virtual machines that have the premiumIO parameter set to true.

If an instance type for your platform meets the minimum requirements for cluster machines, it is supported to use in OpenShift Container Platform.

Additional resources

Optimizing storage

6.9.7.3. Tested instance types for Azure

The following Microsoft Azure instance types have been tested with OpenShift Container Platform.

Example 6.4. Machine types

c4.*
c5.*
c5a.*
i3.*
m4.*
m5.*
m5a.*
m6a.*
m6i.*
r4.*
r5.*
r5a.*
r6i.*
t3.*
t3a.*

6.9.7.4. Sample customized install-config.yaml file for Azure

You can customize the install-config.yaml file to specify more details about your OpenShift Container Platform cluster’s platform or modify the values of the required parameters.

Important

This sample YAML file is provided for reference only. You must obtain your install-config.yaml file by using the installation program and modify it.

apiVersion: v1
baseDomain: example.com 1
controlPlane: 2
  hyperthreading: Enabled 3 4
  name: master
  platform:
    azure:
      encryptionAtHost: true
      ultraSSDCapability: Enabled
      osDisk:
        diskSizeGB: 1024 5
        diskType: Premium_LRS
        diskEncryptionSet:
          resourceGroup: disk_encryption_set_resource_group
          name: disk_encryption_set_name
          subscriptionId: secondary_subscription_id
      type: Standard_D8s_v3
  replicas: 3
compute: 6
- hyperthreading: Enabled 7
  name: worker
  platform:
    azure:
      ultraSSDCapability: Enabled
      type: Standard_D2s_v3
      encryptionAtHost: true
      osDisk:
        diskSizeGB: 512 8
        diskType: Standard_LRS
        diskEncryptionSet:
          resourceGroup: disk_encryption_set_resource_group
          name: disk_encryption_set_name
          subscriptionId: secondary_subscription_id
      zones: 9
      - "1"
      - "2"
      - "3"
  replicas: 5
metadata:
  name: test-cluster 10
networking:
  clusterNetwork:
  - cidr: 10.128.0.0/14
    hostPrefix: 23
  machineNetwork:
  - cidr: 10.0.0.0/16
  networkType: OpenShiftSDN
  serviceNetwork:
  - 172.30.0.0/16
platform:
  azure:
    defaultMachinePlatform:
      ultraSSDCapability: Enabled
    baseDomainResourceGroupName: resource_group 11
    region: centralus 12
    resourceGroupName: existing_resource_group 13
    networkResourceGroupName: vnet_resource_group 14
    virtualNetwork: vnet 15
    controlPlaneSubnet: control_plane_subnet 16
    computeSubnet: compute_subnet 17
    outboundType: UserDefinedRouting 18
    cloudName: AzurePublicCloud
pullSecret: '{"auths": ...}' 19
fips: false 20
sshKey: ssh-ed25519 AAAA... 21
publish: Internal 22

1 10 12 19: Required. The installation program prompts you for this value.
2 6: If you do not provide these parameters and values, the installation program provides the default value.
3 7: The controlPlane section is a single mapping, but the compute section is a sequence of mappings. To meet the requirements of the different data structures, the first line of the compute section must begin with a hyphen, -, and the first line of the controlPlane section must not. Only one control plane pool is used.
4: Whether to enable or disable simultaneous multithreading, or hyperthreading. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. You can disable it by setting the parameter value to Disabled. If you disable simultaneous multithreading in some cluster machines, you must disable it in all cluster machines.
Important
If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance. Use larger virtual machine types, such as Standard_D8s_v3, for your machines if you disable simultaneous multithreading.
5 8: You can specify the size of the disk to use in GB. Minimum recommendation for control plane nodes is 1024 GB.
9: Specify a list of zones to deploy your machines to. For high availability, specify at least two zones.
11: Specify the name of the resource group that contains the DNS zone for your base domain.
13: Specify the name of an already existing resource group to install your cluster to. If undefined, a new resource group is created for the cluster.
14: If you use an existing VNet, specify the name of the resource group that contains it.
15: If you use an existing VNet, specify its name.
16: If you use an existing VNet, specify the name of the subnet to host the control plane machines.
17: If you use an existing VNet, specify the name of the subnet to host the compute machines.
18: You can customize your own outbound routing. Configuring user-defined routing prevents exposing external endpoints in your cluster. User-defined routing for egress requires deploying your cluster to an existing VNet.
20: Whether to enable or disable FIPS mode. By default, FIPS mode is not enabled. If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead.
Important
To enable FIPS mode for your cluster, you must run the installation program from a Red Hat Enterprise Linux (RHEL) computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see Installing the system in FIPS mode. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on OpenShift Container Platform deployments on the x86_64 architecture.
21: You can optionally provide the sshKey value that you use to access the machines in your cluster.
Note
For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.
22: How to publish the user-facing endpoints of your cluster. Set publish to Internal to deploy a private cluster, which cannot be accessed from the internet. The default value is External.

6.9.7.5. Configuring the cluster-wide proxy during installation

Prerequisites

You have an existing install-config.yaml file.
You reviewed the sites that your cluster requires access to and determined whether any of them need to bypass the proxy. By default, all cluster egress traffic is proxied, including calls to hosting cloud provider APIs. You added sites to the Proxy object’s spec.noProxy field to bypass the proxy if necessary.
Note
The Proxy object status.noProxy field is populated with the values of the networking.machineNetwork[].cidr, networking.clusterNetwork[].cidr, and networking.serviceNetwork[] fields from your installation configuration.
For installations on Amazon Web Services (AWS), Google Cloud Platform (GCP), Microsoft Azure, and Red Hat OpenStack Platform (RHOSP), the Proxy object status.noProxy field is also populated with the instance metadata endpoint (169.254.169.254).

Procedure

Edit your install-config.yaml file and add the proxy settings. For example:
```
apiVersion: v1
baseDomain: my.domain.com
proxy:
  httpProxy: http://<username>:<pswd>@<ip>:<port> 1
  httpsProxy: https://<username>:<pswd>@<ip>:<port> 2
  noProxy: example.com 3
additionalTrustBundle: | 4
    -----BEGIN CERTIFICATE-----
    <MY_TRUSTED_CA_CERT>
    -----END CERTIFICATE-----
```
1
A proxy URL to use for creating HTTP connections outside the cluster. The URL scheme must be http.
2
A proxy URL to use for creating HTTPS connections outside the cluster.
3
A comma-separated list of destination domain names, IP addresses, or other network CIDRs to exclude from proxying. Preface a domain with . to match subdomains only. For example, .y.com matches x.y.com, but not y.com. Use * to bypass the proxy for all destinations.
4
If provided, the installation program generates a config map that is named user-ca-bundle in the openshift-config namespace that contains one or more additional CA certificates that are required for proxying HTTPS connections. The Cluster Network Operator then creates a trusted-ca-bundle config map that merges these contents with the Red Hat Enterprise Linux CoreOS (RHCOS) trust bundle, and this config map is referenced in the trustedCA field of the Proxy object. The additionalTrustBundle field is required unless the proxy’s identity certificate is signed by an authority from the RHCOS trust bundle.
Note
The installation program does not support the proxy readinessEndpoints field.
Note
If the installer times out, restart and then complete the deployment by using the wait-for command of the installer. For example:
```
$ ./openshift-install wait-for install-complete --log-level debug
```
Save the file and reference it when installing OpenShift Container Platform.

Note

Only the Proxy object named cluster is supported, and no additional proxies can be created.

Additional resources

For more details about Accelerated Networking, see Accelerated Networking for Microsoft Azure VMs.

6.9.8. Deploying the cluster

You can install OpenShift Container Platform on a compatible cloud platform.

Important

You can run the create cluster command of the installation program only once, during initial installation.

Prerequisites

Configure an account with the cloud platform that hosts your cluster.
Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.

Procedure

Change to the directory that contains the installation program and initialize the cluster deployment:
```
$ ./openshift-install create cluster --dir <installation_directory> \ 1
    --log-level=info 2
```
1
For <installation_directory>, specify the location of your customized ./install-config.yaml file.
2
To view different installation details, specify warn, debug, or error instead of info.
Note
If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

Verification

When the cluster deployment completes successfully:

The terminal displays directions for accessing your cluster, including a link to the web console and credentials for the kubeadmin user.
Credential information also outputs to <installation_directory>/.openshift_install.log.

Important

Do not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

Example output

...
INFO Install complete!
INFO To access the cluster as the system:admin user when using 'oc', run 'export KUBECONFIG=/home/myuser/install_dir/auth/kubeconfig'
INFO Access the OpenShift web-console here: https://console-openshift-console.apps.mycluster.example.com
INFO Login to the console with user: "kubeadmin", and password: "password"
INFO Time elapsed: 36m22s

Important

The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.
It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.

6.9.9. Finalizing user-managed encryption after installation

Procedure

Obtain the identity of the cluster resource group used by the installer:
1. If you specified an existing resource group in install-config.yaml, obtain its Azure identity by running the following command:
```
$ az identity list --resource-group "<existing_resource_group>"
```
2. If you did not specify a existing resource group in install-config.yaml, locate the resource group that the installer created, and then obtain its Azure identity by running the following commands:
```
$ az group list
```
```
$ az identity list --resource-group "<installer_created_resource_group>"
```
Grant a role assignment to the cluster resource group so that it can write to the Disk Encryption Set by running the following command:
```
$ az role assignment create --role "<privileged_role>" \1
    --assignee "<resource_group_identity>" 2
```
1
Specifies an Azure role that has read/write permissions to the disk encryption set. You can use the Owner role or a custom role with the necessary permissions.
2
Specifies the identity of the cluster resource group.
Obtain the id of the disk encryption set you created prior to installation by running the following command:
```
$ az disk-encryption-set show -n <disk_encryption_set_name> \1
     --resource-group <resource_group_name> 2
```
1
Specifies the name of the disk encryption set.
2
Specifies the resource group that contains the disk encryption set. The id is in the format of "/subscriptions/…/resourceGroups/…/providers/Microsoft.Compute/diskEncryptionSets/…".
Obtain the identity of the cluster service principal by running the following command:
```
$ az identity show -g <cluster_resource_group> \1
     -n <cluster_service_principal_name> \2
     --query principalId --out tsv
```
1
Specifies the name of the cluster resource group created by the installation program.
2
Specifies the name of the cluster service principal created by the installation program. The identity is in the format of 12345678-1234-1234-1234-1234567890.
Create a role assignment that grants the cluster service principal Contributor privileges to the disk encryption set by running the following command:
```
$ az role assignment create --assignee <cluster_service_principal_id> \1
     --role 'Contributor' \//
     --scope <disk_encryption_set_id> \2
```
1
Specifies the ID of the cluster service principal obtained in the previous step.
2
Specifies the ID of the disk encryption set.
Create a storage class that uses the user-managed disk encryption set:
1. Save the following storage class definition to a file, for example storage-class-definition.yaml:
```
kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
  name: managed-premium
provisioner: kubernetes.io/azure-disk
parameters:
  skuname: Premium_LRS
  kind: Managed
  diskEncryptionSetID: "<disk_encryption_set_ID>" 1
  resourceGroup: "<resource_group_name>" 2
reclaimPolicy: Delete
allowVolumeExpansion: true
volumeBindingMode: WaitForFirstConsumer
```
  1
  Specifies the ID of the disk encryption set that you created in the prerequisite steps, for example "/subscriptions/xxxxxx-xxxxx-xxxxx/resourceGroups/test-encryption/providers/Microsoft.Compute/diskEncryptionSets/disk-encryption-set-xxxxxx".
  2
  Specifies the name of the resource group used by the installer. This is the same resource group from the first step.
2. Create the storage class managed-premium from the file you created by running the following command:
```
$ oc create -f storage-class-definition.yaml
```
Select the managed-premium storage class when you create persistent volumes to use encrypted storage.

6.9.10. Installing the OpenShift CLI by downloading the binary

You can install the OpenShift CLI (oc) to interact with OpenShift Container Platform from a command-line interface. You can install oc on Linux, Windows, or macOS.

Important

If you installed an earlier version of oc, you cannot use it to complete all of the commands in OpenShift Container Platform 4.11. Download and install the new version of oc.

Installing the OpenShift CLI on Linux

You can install the OpenShift CLI (oc) binary on Linux by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the architecture in the Product Variant drop-down menu.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 Linux Client entry and save the file.
Unpack the archive:
```
$ tar xvf <file>
```
Place the oc binary in a directory that is on your PATH.
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
$ oc <command>
```

Installing the OpenShift CLI on Windows

You can install the OpenShift CLI (oc) binary on Windows by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 Windows Client entry and save the file.
Unzip the archive with a ZIP program.
Move the oc binary to a directory that is on your PATH.
To check your PATH, open the command prompt and execute the following command:
```
C:\> path
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
C:\> oc <command>
```

Installing the OpenShift CLI on macOS

You can install the OpenShift CLI (oc) binary on macOS by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 macOS Client entry and save the file.
Note
For macOS arm64, choose the OpenShift v4.11 macOS arm64 Client entry.
Unpack and unzip the archive.
Move the oc binary to a directory on your PATH.
To check your PATH, open a terminal and execute the following command:
```
$ echo $PATH
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
$ oc <command>
```

6.9.11. Logging in to the cluster by using the CLI

Prerequisites

You deployed an OpenShift Container Platform cluster.
You installed the oc CLI.

Procedure

Export the kubeadmin credentials:
```
$ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1
```
1
For <installation_directory>, specify the path to the directory that you stored the installation files in.
Verify you can run oc commands successfully using the exported configuration:
```
$ oc whoami
```
Example output
```
system:admin
```

Additional resources

See Accessing the web console for more details about accessing and understanding the OpenShift Container Platform web console.

6.9.12. Telemetry access for OpenShift Container Platform

Additional resources

See About remote health monitoring for more information about the Telemetry service

6.9.13. Next steps

Customize your cluster.
If necessary, you can opt out of remote health reporting.

6.10. Installing a cluster on Azure into a government region

In OpenShift Container Platform version 4.11, you can install a cluster on Microsoft Azure into a government region. To configure the government region, you modify parameters in the install-config.yaml file before you install the cluster.

6.10.1. Prerequisites

You reviewed details about the OpenShift Container Platform installation and update processes.
You read the documentation on selecting a cluster installation method and preparing it for users.
You configured an Azure account to host the cluster and determined the tested and validated government region to deploy the cluster to.
If you use a firewall, you configured it to allow the sites that your cluster requires access to.
If the cloud identity and access management (IAM) APIs are not accessible in your environment, or if you do not want to store an administrator-level credential secret in the kube-system namespace, you can manually create and maintain IAM credentials.
If you use customer-managed encryption keys, you prepared your Azure environment for encryption.

6.10.2. Azure government regions

OpenShift Container Platform supports deploying a cluster to Microsoft Azure Government (MAG) regions. MAG is specifically designed for US government agencies at the federal, state, and local level, as well as contractors, educational institutions, and other US customers that must run sensitive workloads on Azure. MAG is composed of government-only data center regions, all granted an Impact Level 5 Provisional Authorization.

Installing to a MAG region requires manually configuring the Azure Government dedicated cloud instance and region in the install-config.yaml file. You must also update your service principal to reference the appropriate government environment.

Note

The Azure government region cannot be selected using the guided terminal prompts from the installation program. You must define the region manually in the install-config.yaml file. Remember to also set the dedicated cloud instance, like AzureUSGovernmentCloud, based on the region specified.

6.10.3. Private clusters

Important

To deploy a private cluster, you must:

Use existing networking that meets your requirements. Your cluster resources might be shared between other clusters on the network.
Deploy from a machine that has access to:
- The API services for the cloud to which you provision.
- The hosts on the network that you provision.
- The internet to obtain installation media.

6.10.3.1. Private clusters in Azure

The cluster still requires access to internet to access the Azure APIs.

The following items are not required or created when you install a private cluster:

A BaseDomainResourceGroup, since the cluster does not create public records
Public IP addresses
Public DNS records

Public endpoints

The cluster is configured so that the Operators do not create public records for the cluster and all cluster machines are placed in the private subnets that you specify.

6.10.3.1.1. Limitations

Private clusters on Azure are subject to only the limitations that are associated with the use of an existing VNet.

6.10.3.2. User-defined outbound routing

When configuring a cluster to use user-defined routing, the installation program does not create the following resources:

Outbound rules for access to the internet.
Public IPs for the public load balancer.
Kubernetes Service object to add the cluster machines to the public load balancer for outbound requests.

You must ensure the following items are available before setting user-defined routing:

Egress to the internet is possible to pull container images, unless using an OpenShift image registry mirror.
The cluster can access Azure APIs.
Various allowlist endpoints are configured. You can reference these endpoints in the Configuring your firewall section.

There are several pre-existing networking setups that are supported for internet access using user-defined routing.

Private cluster with network address translation

When using a VNet setup with Azure NAT and user-defined routing configured, you can create a private cluster with no public endpoints.

Private cluster with Azure Firewall

When using a VNet setup with Azure Firewall and user-defined routing configured, you can create a private cluster with no public endpoints.

Private cluster with a proxy configuration

Private cluster with no internet access

An OpenShift image registry mirror that allows for pulling container images
Access to Azure APIs

With these requirements available, you can use user-defined routing to create private clusters with no public endpoints.

6.10.4. About reusing a VNet for your OpenShift Container Platform cluster

6.10.4.1. Requirements for using your VNet

Subnets
Route tables
VNets
Network Security Groups

Note

The installation program requires that you use the cloud-provided DNS server. Using a custom DNS server is not supported and causes the installation to fail.

Your VNet must meet the following characteristics:

The VNet’s CIDR block must contain the Networking.MachineCIDR range, which is the IP address pool for cluster machines.
The VNet and its subnets must belong to the same resource group, and the subnets must be configured to use Azure-assigned DHCP IP addresses instead of static IP addresses.

Note

To ensure that the subnets that you provide are suitable, the installation program confirms the following data:

All the specified subnets exist.
There are two private subnets, one for the control plane machines and one for the compute machines.
The subnet CIDRs belong to the machine CIDR that you specified. Machines are not provisioned in availability zones that you do not provide private subnets for. If required, the installation program creates public load balancers that manage the control plane and worker nodes, and Azure allocates a public IP address to them.

Note

If you destroy a cluster that uses an existing VNet, the VNet is not deleted.

6.10.4.1.1. Network security group requirements

Important

Table 6.30. Required ports
Port	Description	Control plane	Compute
`80`	Allows HTTP traffic		x
`443`	Allows HTTPS traffic		x
`6443`	Allows communication to the control plane machines	x
`22623`	Allows internal communication to the machine config server for provisioning machines	x

Important

To ensure that the machine config server endpoints, ports 22623 and 22624, are secured in bare metal scenarios, customers must configure proper network policies.

Additional resources

About the OpenShift SDN network plugin

6.10.4.2. Division of permissions

6.10.4.3. Isolation between clusters

Because the cluster is unable to modify network security groups in an existing subnet, there is no way to isolate clusters from each other on the VNet.

6.10.5. Internet access for OpenShift Container Platform

In OpenShift Container Platform 4.11, you require access to the internet to install your cluster.

You must have internet access to:

Access OpenShift Cluster Manager Hybrid Cloud Console to download the installation program and perform subscription management. If the cluster has internet access and you do not disable Telemetry, that service automatically entitles your cluster.
Access Quay.io to obtain the packages that are required to install your cluster.
Obtain the packages that are required to perform cluster updates.

Important

6.10.6. Generating a key pair for cluster node SSH access

Important

Do not skip this procedure in production environments, where disaster recovery and debugging is required.

Note

You must use a local key, not one that you configured with platform-specific approaches such as AWS key pairs.

Procedure

If you do not have an existing SSH key pair on your local machine to use for authentication onto your cluster nodes, create one. For example, on a computer that uses a Linux operating system, run the following command:
```
$ ssh-keygen -t ed25519 -N '' -f <path>/<file_name> 1
```
1
Specify the path and file name, such as ~/.ssh/id_ed25519, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.
Note
If you plan to install an OpenShift Container Platform cluster that uses FIPS validated or Modules In Process cryptographic libraries on the x86_64 architecture, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.
View the public SSH key:
```
$ cat <path>/<file_name>.pub
```
For example, run the following to view the ~/.ssh/id_ed25519.pub public key:
```
$ cat ~/.ssh/id_ed25519.pub
```
Add the SSH private key identity to the SSH agent for your local user, if it has not already been added. SSH agent management of the key is required for password-less SSH authentication onto your cluster nodes, or if you want to use the ./openshift-install gather command.
Note
On some distributions, default SSH private key identities such as ~/.ssh/id_rsa and ~/.ssh/id_dsa are managed automatically.
1. If the ssh-agent process is not already running for your local user, start it as a background task:
```
$ eval "$(ssh-agent -s)"
```
  Example output
```
Agent pid 31874
```
  Note
  If your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.
Add your SSH private key to the ssh-agent:
```
$ ssh-add <path>/<file_name> 1
```
1
Specify the path and file name for your SSH private key, such as ~/.ssh/id_ed25519
Example output
```
Identity added: /home/<you>/<path>/<file_name> (<computer_name>)
```

Next steps

When you install OpenShift Container Platform, provide the SSH public key to the installation program.

6.10.7. Obtaining the installation program

Before you install OpenShift Container Platform, download the installation file on a local computer.

Prerequisites

You have a computer that runs Linux or macOS, with 500 MB of local disk space.

Procedure

Access the Infrastructure Provider page on the OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.
Select your infrastructure provider.
Navigate to the page for your installation type, download the installation program that corresponds with your host operating system and architecture, and place the file in the directory where you will store the installation configuration files.
Important
The installation program creates several files on the computer that you use to install your cluster. You must keep the installation program and the files that the installation program creates after you finish installing the cluster. Both files are required to delete the cluster.
Important
Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. To remove your cluster, complete the OpenShift Container Platform uninstallation procedures for your specific cloud provider.
Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:
```
$ tar -xvf openshift-install-linux.tar.gz
```
Download your installation pull secret from the Red Hat OpenShift Cluster Manager. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

6.10.8. Manually creating the installation configuration file

When installing OpenShift Container Platform on Microsoft Azure into a government region, you must manually generate your installation configuration file.

Prerequisites

You have an SSH public key on your local machine to provide to the installation program. The key will be used for SSH authentication onto your cluster nodes for debugging and disaster recovery.
You have obtained the OpenShift Container Platform installation program and the pull secret for your cluster.

Procedure

Create an installation directory to store your required installation assets in:
```
$ mkdir <installation_directory>
```
Important
You must create a directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.
Customize the sample install-config.yaml file template that is provided and save it in the <installation_directory>.
Note
You must name this configuration file install-config.yaml.
Back up the install-config.yaml file so that you can use it to install multiple clusters.
Important
The install-config.yaml file is consumed during the next step of the installation process. You must back it up now.

6.10.8.1. Installation configuration parameters

Note

After installation, you cannot modify these parameters in the install-config.yaml file.

6.10.8.1.1. Required configuration parameters

Required installation configuration parameters are described in the following table:

Table 6.31. Required parameters
Parameter	Description	Values
`apiVersion`	The API version for the `install-config.yaml` content. The current version is `v1`. The installer may also support older API versions.	String
`baseDomain`	The base domain of your cloud provider. The base domain is used to create routes to your OpenShift Container Platform cluster components. The full DNS name for your cluster is a combination of the `baseDomain` and `metadata.name` parameter values that uses the `<metadata.name>.<baseDomain>` format.	A fully-qualified domain or subdomain name, such as `example.com`.
`metadata`	Kubernetes resource `ObjectMeta`, from which only the `name` parameter is consumed.	Object
`metadata.name`	The name of the cluster. DNS records for the cluster are all subdomains of `{{.metadata.name}}.{{.baseDomain}}`.	String of lowercase letters, hyphens (`-`), and periods (`.`), such as `dev`.
`platform`	The configuration for the specific platform upon which to perform the installation: `alibabacloud`, `aws`, `baremetal`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `ovirt`, `vsphere`, or `{}`. For additional information about `platform.<platform>` parameters, consult the table for your specific platform that follows.	Object
`pullSecret`	Get a pull secret from the Red Hat OpenShift Cluster Manager to authenticate downloading container images for OpenShift Container Platform components from services such as Quay.io.	{ "auths":{ "cloud.openshift.com":{ "auth":"b3Blb=", "email":"you@example.com" }, "quay.io":{ "auth":"b3Blb=", "email":"you@example.com" } } }

6.10.8.1.2. Network configuration parameters

Only IPv4 addresses are supported.

Note

Table 6.32. Network parameters
Parameter	Description	Values
`networking`	The configuration for the cluster network.	Object Note You cannot modify parameters specified by the `networking` object after installation.
`networking.networkType`	The cluster network provider Container Network Interface (CNI) cluster network provider to install.	Either `OpenShiftSDN` or `OVNKubernetes`. `OpenShiftSDN` is a CNI provider for all-Linux networks. `OVNKubernetes` is a CNI provider for Linux networks and hybrid networks that contain both Linux and Windows servers. The default value is `OpenShiftSDN`.
`networking.clusterNetwork`	The IP address blocks for pods. The default value is `10.128.0.0/14` with a host prefix of `/23`. If you specify multiple IP address blocks, the blocks must not overlap.	An array of objects. For example: networking: clusterNetwork: - cidr: 10.128.0.0/14 hostPrefix: 23
`networking.clusterNetwork.cidr`	Required if you use `networking.clusterNetwork`. An IP address block. An IPv4 network.	An IP address block in Classless Inter-Domain Routing (CIDR) notation. The prefix length for an IPv4 block is between `0` and `32`.
`networking.clusterNetwork.hostPrefix`	The subnet prefix length to assign to each individual node. For example, if `hostPrefix` is set to `23` then each node is assigned a `/23` subnet out of the given `cidr`. A `hostPrefix` value of `23` provides 510 (2^(32 - 23) - 2) pod IP addresses.	A subnet prefix. The default value is `23`.
`networking.serviceNetwork`	The IP address block for services. The default value is `172.30.0.0/16`. The OpenShift SDN and OVN-Kubernetes network providers support only a single IP address block for the service network.	An array with an IP address block in CIDR format. For example: networking: serviceNetwork: - 172.30.0.0/16
`networking.machineNetwork`	The IP address blocks for machines. If you specify multiple IP address blocks, the blocks must not overlap.	An array of objects. For example: networking: machineNetwork: - cidr: 10.0.0.0/16
`networking.machineNetwork.cidr`	Required if you use `networking.machineNetwork`. An IP address block. The default value is `10.0.0.0/16` for all platforms other than libvirt. For libvirt, the default value is `192.168.126.0/24`.	An IP network block in CIDR notation. For example, `10.0.0.0/16`. Note Set the `networking.machineNetwork` to match the CIDR that the preferred NIC resides in.

6.10.8.1.3. Optional configuration parameters

Optional installation configuration parameters are described in the following table:

Table 6.33. Optional parameters
Parameter	Description	Values
`additionalTrustBundle`	A PEM-encoded X.509 certificate bundle that is added to the nodes' trusted certificate store. This trust bundle may also be used when a proxy has been configured.	String
`capabilities`	Controls the installation of optional core cluster components. You can reduce the footprint of your OpenShift Container Platform cluster by disabling optional components.	String array
`capabilities.baselineCapabilitySet`	Selects an initial set of optional capabilities to enable. Valid values are `None`, `v4.11` and `vCurrent`. `v4.11` enables the `baremetal` Operator, the `marketplace` Operator, and the `openshift-samples` content. `vCurrent` installs the recommended set of capabilities for the current version of OpenShift Container Platform. The default value is `vCurrent`.	String
`capabilities.additionalEnabledCapabilities`	Extends the set of optional capabilities beyond what you specify in `baselineCapabilitySet`. Valid values are `baremetal`, `marketplace` and `openshift-samples`. You may specify multiple capabilities in this parameter.	String array
`cgroupsV2`	Enables Linux control groups version 2 (cgroups v2) on specific nodes in your cluster. The OpenShift Container Platform process for enabling cgroups v2 disables all cgroup version 1 controllers and hierarchies. The OpenShift Container Platform cgroups version 2 feature is in Developer Preview and is not supported by Red Hat at this time.	`true`
`compute`	The configuration for the machines that comprise the compute nodes.	Array of `MachinePool` objects.
`compute.architecture`	Determines the instruction set architecture of the machines in the pool. Currently, clusters with varied architectures are not supported. All pools must specify the same architecture. Valid values are `amd64` (the default).	String
`compute.hyperthreading`	Whether to enable or disable simultaneous multithreading, or `hyperthreading`, on compute machines. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. Important If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.	`Enabled` or `Disabled`
`compute.name`	Required if you use `compute`. The name of the machine pool.	`worker`
`compute.platform`	Required if you use `compute`. Use this parameter to specify the cloud provider to host the worker machines. This parameter value must match the `controlPlane.platform` parameter value.	`alibabacloud`, `aws`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `ovirt`, `vsphere`, or `{}`
`compute.replicas`	The number of compute machines, which are also known as worker machines, to provision.	A positive integer greater than or equal to `2`. The default value is `3`.
`controlPlane`	The configuration for the machines that comprise the control plane.	Array of `MachinePool` objects.
`controlPlane.architecture`	Determines the instruction set architecture of the machines in the pool. Currently, clusters with varied architectures are not supported. All pools must specify the same architecture. Valid values are `amd64` (the default).	String
`controlPlane.hyperthreading`	Whether to enable or disable simultaneous multithreading, or `hyperthreading`, on control plane machines. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. Important If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.	`Enabled` or `Disabled`
`controlPlane.name`	Required if you use `controlPlane`. The name of the machine pool.	`master`
`controlPlane.platform`	Required if you use `controlPlane`. Use this parameter to specify the cloud provider that hosts the control plane machines. This parameter value must match the `compute.platform` parameter value.	`alibabacloud`, `aws`, `azure`, `gcp`, `ibmcloud`, `nutanix`, `openstack`, `ovirt`, `vsphere`, or `{}`
`controlPlane.replicas`	The number of control plane machines to provision.	The only supported value is `3`, which is the default value.
`credentialsMode`	The Cloud Credential Operator (CCO) mode. If no mode is specified, the CCO dynamically tries to determine the capabilities of the provided credentials, with a preference for mint mode on the platforms where multiple modes are supported. Note Not all CCO modes are supported for all cloud providers. For more information on CCO modes, see the Cloud Credential Operator entry in the Cluster Operators reference content. Note If your AWS account has service control policies (SCP) enabled, you must configure the `credentialsMode` parameter to `Mint`, `Passthrough` or `Manual`.	`Mint`, `Passthrough`, `Manual` or an empty string (`""`).
`fips`	Enable or disable FIPS mode. The default is `false` (disabled). If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead. Important To enable FIPS mode for your cluster, you must run the installation program from a Red Hat Enterprise Linux (RHEL) computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see Installing the system in FIPS mode. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on OpenShift Container Platform deployments on the `x86_64` architecture. Note If you are using Azure File storage, you cannot enable FIPS mode.	`false` or `true`
`imageContentSources`	Sources and repositories for the release-image content.	Array of objects. Includes a `source` and, optionally, `mirrors`, as described in the following rows of this table.
`imageContentSources.source`	Required if you use `imageContentSources`. Specify the repository that users refer to, for example, in image pull specifications.	String
`imageContentSources.mirrors`	Specify one or more repositories that may also contain the same images.	Array of strings
`publish`	How to publish or expose the user-facing endpoints of your cluster, such as the Kubernetes API, OpenShift routes.	`Internal` or `External`. To deploy a private cluster, which cannot be accessed from the internet, set `publish` to `Internal`. The default value is `External`.
`sshKey`	The SSH key to authenticate access to your cluster machines. Note For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your `ssh-agent` process uses.	For example, `sshKey: ssh-ed25519 AAAA..`.

6.10.8.1.4. Additional Azure configuration parameters

Additional Azure configuration parameters are described in the following table.

Note

Table 6.34. Additional Azure parameters
Parameter	Description	Values
`compute.platform.azure.encryptionAtHost`	Enables host-level encryption for compute machines. You can enable this encryption alongside user-managed server-side encryption. This feature encrypts temporary, ephemeral, cached and un-managed disks on the VM host. This is not a prerequisite for user-managed server-side encryption.	`true` or `false`. The default is `false`.
`compute.platform.azure.osDisk.diskSizeGB`	The Azure disk size for the VM.	Integer that represents the size of the disk in GB. The default is `128`.
`compute.platform.azure.osDisk.diskType`	Defines the type of disk.	`standard_LRS`, `premium_LRS`, or `standardSSD_LRS`. The default is `premium_LRS`.
`compute.platform.azure.ultraSSDCapability`	Enables the use of Azure ultra disks for persistent storage on compute nodes. This requires that your Azure region and zone have ultra disks available.	`Enabled`, `Disabled`. The default is `Disabled`.
`compute.platform.azure.osDisk.diskEncryptionSet.resourceGroup`	The name of the Azure resource group that contains the disk encryption set from the installation prerequisites. This resource group should be different than the resource group where you install the cluster to avoid deleting your Azure encryption key when the cluster is destroyed. This value is only necessary if you intend to install the cluster with user-managed disk encryption.	String, for example `production_encryption_resource_group`.
`compute.platform.azure.osDisk.diskEncryptionSet.name`	The name of the disk encryption set that contains the encryption key from the installation prerequisites.	String, for example `production_disk_encryption_set`.
`compute.platform.azure.osDisk.diskEncryptionSet.subscriptionId`	Defines the Azure subscription of the disk encryption set where the disk encryption set resides. This secondary disk encryption set is used to encrypt compute machines.	String, in the format `00000000-0000-0000-0000-000000000000`.
`compute.platform.azure.vmNetworkingType`	Enables accelerated networking. Accelerated networking enables single root I/O virtualization (SR-IOV) to a VM, improving its networking performance. If instance type of compute machines support `Accelerated` networking, by default, the installer enables `Accelerated` networking, otherwise the default networking type is `Basic`.	`Accelerated` or `Basic`.
`compute.platform.azure.type`	Defines the Azure instance type for compute machines.	String
`compute.platform.azure.zones`	The availability zones where the installation program creates compute machines.	String list
`controlPlane.platform.azure.type`	Defines the Azure instance type for control plane machines.	String
`controlPlane.platform.azure.zones`	The availability zones where the installation program creates control plane machines.	String list
`platform.azure.defaultMachinePlatform.encryptionAtHost`	Enables host-level encryption for compute machines. You can enable this encryption alongside user-managed server-side encryption. This feature encrypts temporary, ephemeral, cached, and un-managed disks on the VM host. This parameter is not a prerequisite for user-managed server-side encryption.	`true` or `false`. The default is `false`.
`platform.azure.defaultMachinePlatform.osDisk.diskEncryptionSet.name`	The name of the disk encryption set that contains the encryption key from the installation prerequisites.	String, for example, `production_disk_encryption_set`.
`platform.azure.defaultMachinePlatform.osDisk.diskEncryptionSet.resourceGroup`	The name of the Azure resource group that contains the disk encryption set from the installation prerequisites. To avoid deleting your Azure encryption key when the cluster is destroyed, this resource group must be different from the resource group where you install the cluster. This value is necessary only if you intend to install the cluster with user-managed disk encryption.	String, for example, `production_encryption_resource_group`.
`platform.azure.defaultMachinePlatform.osDisk.diskEncryptionSet.subscriptionId`	Defines the Azure subscription of the disk encryption set where the disk encryption set resides. This secondary disk encryption set is used to encrypt compute machines.	String, in the format `00000000-0000-0000-0000-000000000000`.
`platform.azure.defaultMachinePlatform.osDisk.diskSizeGB`	The Azure disk size for the VM.	Integer that represents the size of the disk in GB. The default is `128`.
`platform.azure.defaultMachinePlatform.osDisk.diskType`	Defines the type of disk.	`premium_LRS` or `standardSSD_LRS`. The default is `premium_LRS`.
`platform.azure.defaultMachinePlatform.type`	The Azure instance type for control plane and compute machines.	The Azure instance type.
`platform.azure.defaultMachinePlatform.zones`	The availability zones where the installation program creates compute and control plane machines.	String list.
`controlPlane.platform.azure.encryptionAtHost`	Enables host-level encryption for control plane machines. You can enable this encryption alongside user-managed server-side encryption. This feature encrypts temporary, ephemeral, cached and un-managed disks on the VM host. This is not a prerequisite for user-managed server-side encryption.	`true` or `false`. The default is `false`.
`controlPlane.platform.azure.osDisk.diskEncryptionSet.resourceGroup`	The name of the Azure resource group that contains the disk encryption set from the installation prerequisites. This resource group should be different than the resource group where you install the cluster to avoid deleting your Azure encryption key when the cluster is destroyed. This value is only necessary if you intend to install the cluster with user-managed disk encryption.	String, for example `production_encryption_resource_group`.
`controlPlane.platform.azure.osDisk.diskEncryptionSet.name`	The name of the disk encryption set that contains the encryption key from the installation prerequisites.	String, for example `production_disk_encryption_set`.
`controlPlane.platform.azure.osDisk.diskEncryptionSet.subscriptionId`	Defines the Azure subscription of the disk encryption set where the disk encryption set resides. This secondary disk encryption set is used to encrypt control plane machines.	String, in the format `00000000-0000-0000-0000-000000000000`.
`controlPlane.platform.azure.osDisk.diskSizeGB`	The Azure disk size for the VM.	Integer that represents the size of the disk in GB. The default is `1024`.
`controlPlane.platform.azure.osDisk.diskType`	Defines the type of disk.	`premium_LRS` or `standardSSD_LRS`. The default is `premium_LRS`.
`controlPlane.platform.azure.ultraSSDCapability`	Enables the use of Azure ultra disks for persistent storage on control plane machines. This requires that your Azure region and zone have ultra disks available.	`Enabled`, `Disabled`. The default is `Disabled`.
`controlPlane.platform.azure.vmNetworkingType`	Enables accelerated networking. Accelerated networking enables single root I/O virtualization (SR-IOV) to a VM, improving its networking performance. If instance type of control plane machines support `Accelerated` networking, by default, the installer enables `Accelerated` networking, otherwise the default networking type is `Basic`.	`Accelerated` or `Basic`.
`platform.azure.baseDomainResourceGroupName`	The name of the resource group that contains the DNS zone for your base domain.	String, for example `production_cluster`.
`platform.azure.resourceGroupName`	The name of an already existing resource group to install your cluster to. This resource group must be empty and only used for this specific cluster; the cluster components assume ownership of all resources in the resource group. If you limit the service principal scope of the installation program to this resource group, you must ensure all other resources used by the installation program in your environment have the necessary permissions, such as the public DNS zone and virtual network. Destroying the cluster by using the installation program deletes this resource group.	String, for example `existing_resource_group`.
`platform.azure.outboundType`	The outbound routing strategy used to connect your cluster to the internet. If you are using user-defined routing, you must have pre-existing networking available where the outbound routing has already been configured prior to installing a cluster. The installation program is not responsible for configuring user-defined routing.	`LoadBalancer` or `UserDefinedRouting`. The default is `LoadBalancer`.
`platform.azure.region`	The name of the Azure region that hosts your cluster.	Any valid region name, such as `centralus`.
`platform.azure.zone`	List of availability zones to place machines in. For high availability, specify at least two zones.	List of zones, for example `["1", "2", "3"]`.
`platform.azure.defaultMachinePlatform.ultraSSDCapability`	Enables the use of Azure ultra disks for persistent storage on control plane and compute machines. This requires that your Azure region and zone have ultra disks available.	`Enabled`, `Disabled`. The default is `Disabled`.
`platform.azure.networkResourceGroupName`	The name of the resource group that contains the existing VNet that you want to deploy your cluster to. This name cannot be the same as the `platform.azure.baseDomainResourceGroupName`.	String.
`platform.azure.virtualNetwork`	The name of the existing VNet that you want to deploy your cluster to.	String.
`platform.azure.controlPlaneSubnet`	The name of the existing subnet in your VNet that you want to deploy your control plane machines to.	Valid CIDR, for example `10.0.0.0/16`.
`platform.azure.computeSubnet`	The name of the existing subnet in your VNet that you want to deploy your compute machines to.	Valid CIDR, for example `10.0.0.0/16`.
`platform.azure.cloudName`	The name of the Azure cloud environment that is used to configure the Azure SDK with the appropriate Azure API endpoints. If empty, the default value `AzurePublicCloud` is used.	Any valid cloud environment, such as `AzurePublicCloud` or `AzureUSGovernmentCloud`.
`platform.azure.defaultMachinePlatform.vmNetworkingType`	Enables accelerated networking. Accelerated networking enables single root I/O virtualization (SR-IOV) to a VM, improving its networking performance.	`Accelerated` or `Basic`. If instance type of control plane and compute machines support `Accelerated` networking, by default, the installer enables `Accelerated` networking, otherwise the default networking type is `Basic`.

Note

You cannot customize Azure Availability Zones or Use tags to organize your Azure resources with an Azure cluster.

6.10.8.2. Minimum resource requirements for cluster installation

Each cluster machine must meet the following minimum requirements:

Table 6.35. Minimum resource requirements
Machine	Operating System	vCPU ^[1]	Virtual RAM	Storage	IOPS ^[2]
Bootstrap	RHCOS	4	16 GB	100 GB	300
Control plane	RHCOS	4	16 GB	100 GB	300
Compute	RHCOS, RHEL 8.6 and later ^[3]	2	8 GB	100 GB	300

One vCPU is equivalent to one physical core when simultaneous multithreading (SMT), or hyperthreading, is not enabled. When enabled, use the following formula to calculate the corresponding ratio: (threads per core × cores) × sockets = vCPUs.
OpenShift Container Platform and Kubernetes are sensitive to disk performance, and faster storage is recommended, particularly for etcd on the control plane nodes which require a 10 ms p99 fsync duration. Note that on many cloud platforms, storage size and IOPS scale together, so you might need to over-allocate storage volume to obtain sufficient performance.
As with all user-provisioned installations, if you choose to use RHEL compute machines in your cluster, you take responsibility for all operating system life cycle management and maintenance, including performing system updates, applying patches, and completing all other required tasks. Use of RHEL 7 compute machines is deprecated and has been removed in OpenShift Container Platform 4.10 and later.

Important

You are required to use Azure virtual machines that have the premiumIO parameter set to true.

If an instance type for your platform meets the minimum requirements for cluster machines, it is supported to use in OpenShift Container Platform.

Additional resources

Optimizing storage

6.10.8.3. Tested instance types for Azure

The following Microsoft Azure instance types have been tested with OpenShift Container Platform.

Example 6.5. Machine types

c4.*
c5.*
c5a.*
i3.*
m4.*
m5.*
m5a.*
m6a.*
m6i.*
r4.*
r5.*
r5a.*
r6i.*
t3.*
t3a.*

6.10.8.4. Sample customized install-config.yaml file for Azure

You can customize the install-config.yaml file to specify more details about your OpenShift Container Platform cluster’s platform or modify the values of the required parameters.

Important

This sample YAML file is provided for reference only. You must obtain your install-config.yaml file by using the installation program and modify it.

apiVersion: v1
baseDomain: example.com 1
controlPlane: 2
  hyperthreading: Enabled 3 4
  name: master
  platform:
    azure:
      encryptionAtHost: true
      ultraSSDCapability: Enabled
      osDisk:
        diskSizeGB: 1024 5
        diskType: Premium_LRS
        diskEncryptionSet:
          resourceGroup: disk_encryption_set_resource_group
          name: disk_encryption_set_name
          subscriptionId: secondary_subscription_id
      type: Standard_D8s_v3
  replicas: 3
compute: 6
- hyperthreading: Enabled 7
  name: worker
  platform:
    azure:
      ultraSSDCapability: Enabled
      type: Standard_D2s_v3
      encryptionAtHost: true
      osDisk:
        diskSizeGB: 512 8
        diskType: Standard_LRS
        diskEncryptionSet:
          resourceGroup: disk_encryption_set_resource_group
          name: disk_encryption_set_name
          subscriptionId: secondary_subscription_id
      zones: 9
      - "1"
      - "2"
      - "3"
  replicas: 5
metadata:
  name: test-cluster 10
networking:
  clusterNetwork:
  - cidr: 10.128.0.0/14
    hostPrefix: 23
  machineNetwork:
  - cidr: 10.0.0.0/16
  networkType: OpenShiftSDN
  serviceNetwork:
  - 172.30.0.0/16
platform:
  azure:
    defaultMachinePlatform:
      ultraSSDCapability: Enabled
    baseDomainResourceGroupName: resource_group 11
    region: usgovvirginia
    resourceGroupName: existing_resource_group 12
    networkResourceGroupName: vnet_resource_group 13
    virtualNetwork: vnet 14
    controlPlaneSubnet: control_plane_subnet 15
    computeSubnet: compute_subnet 16
    outboundType: UserDefinedRouting 17
    cloudName: AzureUSGovernmentCloud 18
pullSecret: '{"auths": ...}' 19
fips: false 20
sshKey: ssh-ed25519 AAAA... 21
publish: Internal 22

1 10 19: Required.
2 6: If you do not provide these parameters and values, the installation program provides the default value.
3 7: The controlPlane section is a single mapping, but the compute section is a sequence of mappings. To meet the requirements of the different data structures, the first line of the compute section must begin with a hyphen, -, and the first line of the controlPlane section must not. Only one control plane pool is used.
4: Whether to enable or disable simultaneous multithreading, or hyperthreading. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. You can disable it by setting the parameter value to Disabled. If you disable simultaneous multithreading in some cluster machines, you must disable it in all cluster machines.
Important
If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance. Use larger virtual machine types, such as Standard_D8s_v3, for your machines if you disable simultaneous multithreading.
5 8: You can specify the size of the disk to use in GB. Minimum recommendation for control plane nodes is 1024 GB.
9: Specify a list of zones to deploy your machines to. For high availability, specify at least two zones.
11: Specify the name of the resource group that contains the DNS zone for your base domain.
12: Specify the name of an already existing resource group to install your cluster to. If undefined, a new resource group is created for the cluster.
13: If you use an existing VNet, specify the name of the resource group that contains it.
14: If you use an existing VNet, specify its name.
15: If you use an existing VNet, specify the name of the subnet to host the control plane machines.
16: If you use an existing VNet, specify the name of the subnet to host the compute machines.
17: You can customize your own outbound routing. Configuring user-defined routing prevents exposing external endpoints in your cluster. User-defined routing for egress requires deploying your cluster to an existing VNet.
18: Specify the name of the Azure cloud environment to deploy your cluster to. Set AzureUSGovernmentCloud to deploy to a Microsoft Azure Government (MAG) region. The default value is AzurePublicCloud.
20: Whether to enable or disable FIPS mode. By default, FIPS mode is not enabled. If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead.
Important
To enable FIPS mode for your cluster, you must run the installation program from a Red Hat Enterprise Linux (RHEL) computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see Installing the system in FIPS mode. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on OpenShift Container Platform deployments on the x86_64 architecture.
21: You can optionally provide the sshKey value that you use to access the machines in your cluster.
Note
For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.
22: How to publish the user-facing endpoints of your cluster. Set publish to Internal to deploy a private cluster, which cannot be accessed from the internet. The default value is External.

6.10.8.5. Configuring the cluster-wide proxy during installation

Prerequisites

You have an existing install-config.yaml file.
You reviewed the sites that your cluster requires access to and determined whether any of them need to bypass the proxy. By default, all cluster egress traffic is proxied, including calls to hosting cloud provider APIs. You added sites to the Proxy object’s spec.noProxy field to bypass the proxy if necessary.
Note
The Proxy object status.noProxy field is populated with the values of the networking.machineNetwork[].cidr, networking.clusterNetwork[].cidr, and networking.serviceNetwork[] fields from your installation configuration.
For installations on Amazon Web Services (AWS), Google Cloud Platform (GCP), Microsoft Azure, and Red Hat OpenStack Platform (RHOSP), the Proxy object status.noProxy field is also populated with the instance metadata endpoint (169.254.169.254).

Procedure

Edit your install-config.yaml file and add the proxy settings. For example:
```
apiVersion: v1
baseDomain: my.domain.com
proxy:
  httpProxy: http://<username>:<pswd>@<ip>:<port> 1
  httpsProxy: https://<username>:<pswd>@<ip>:<port> 2
  noProxy: example.com 3
additionalTrustBundle: | 4
    -----BEGIN CERTIFICATE-----
    <MY_TRUSTED_CA_CERT>
    -----END CERTIFICATE-----
```
1
A proxy URL to use for creating HTTP connections outside the cluster. The URL scheme must be http.
2
A proxy URL to use for creating HTTPS connections outside the cluster.
3
A comma-separated list of destination domain names, IP addresses, or other network CIDRs to exclude from proxying. Preface a domain with . to match subdomains only. For example, .y.com matches x.y.com, but not y.com. Use * to bypass the proxy for all destinations.
4
If provided, the installation program generates a config map that is named user-ca-bundle in the openshift-config namespace that contains one or more additional CA certificates that are required for proxying HTTPS connections. The Cluster Network Operator then creates a trusted-ca-bundle config map that merges these contents with the Red Hat Enterprise Linux CoreOS (RHCOS) trust bundle, and this config map is referenced in the trustedCA field of the Proxy object. The additionalTrustBundle field is required unless the proxy’s identity certificate is signed by an authority from the RHCOS trust bundle.
Note
The installation program does not support the proxy readinessEndpoints field.
Note
If the installer times out, restart and then complete the deployment by using the wait-for command of the installer. For example:
```
$ ./openshift-install wait-for install-complete --log-level debug
```
Save the file and reference it when installing OpenShift Container Platform.

Note

Only the Proxy object named cluster is supported, and no additional proxies can be created.

Additional resources

For more details about Accelerated Networking, see Accelerated Networking for Microsoft Azure VMs.

6.10.9. Deploying the cluster

You can install OpenShift Container Platform on a compatible cloud platform.

Important

You can run the create cluster command of the installation program only once, during initial installation.

Prerequisites

Configure an account with the cloud platform that hosts your cluster.
Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.

Procedure

Change to the directory that contains the installation program and initialize the cluster deployment:
```
$ ./openshift-install create cluster --dir <installation_directory> \ 1
    --log-level=info 2
```
1
For <installation_directory>, specify the location of your customized ./install-config.yaml file.
2
To view different installation details, specify warn, debug, or error instead of info.
Note
If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

Verification

When the cluster deployment completes successfully:

The terminal displays directions for accessing your cluster, including a link to the web console and credentials for the kubeadmin user.
Credential information also outputs to <installation_directory>/.openshift_install.log.

Important

Do not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

Example output

...
INFO Install complete!
INFO To access the cluster as the system:admin user when using 'oc', run 'export KUBECONFIG=/home/myuser/install_dir/auth/kubeconfig'
INFO Access the OpenShift web-console here: https://console-openshift-console.apps.mycluster.example.com
INFO Login to the console with user: "kubeadmin", and password: "password"
INFO Time elapsed: 36m22s

Important

The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.
It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.

6.10.10. Finalizing user-managed encryption after installation

Procedure

Obtain the identity of the cluster resource group used by the installer:
1. If you specified an existing resource group in install-config.yaml, obtain its Azure identity by running the following command:
```
$ az identity list --resource-group "<existing_resource_group>"
```
2. If you did not specify a existing resource group in install-config.yaml, locate the resource group that the installer created, and then obtain its Azure identity by running the following commands:
```
$ az group list
```
```
$ az identity list --resource-group "<installer_created_resource_group>"
```
Grant a role assignment to the cluster resource group so that it can write to the Disk Encryption Set by running the following command:
```
$ az role assignment create --role "<privileged_role>" \1
    --assignee "<resource_group_identity>" 2
```
1
Specifies an Azure role that has read/write permissions to the disk encryption set. You can use the Owner role or a custom role with the necessary permissions.
2
Specifies the identity of the cluster resource group.
Obtain the id of the disk encryption set you created prior to installation by running the following command:
```
$ az disk-encryption-set show -n <disk_encryption_set_name> \1
     --resource-group <resource_group_name> 2
```
1
Specifies the name of the disk encryption set.
2
Specifies the resource group that contains the disk encryption set. The id is in the format of "/subscriptions/…/resourceGroups/…/providers/Microsoft.Compute/diskEncryptionSets/…".
Obtain the identity of the cluster service principal by running the following command:
```
$ az identity show -g <cluster_resource_group> \1
     -n <cluster_service_principal_name> \2
     --query principalId --out tsv
```
1
Specifies the name of the cluster resource group created by the installation program.
2
Specifies the name of the cluster service principal created by the installation program. The identity is in the format of 12345678-1234-1234-1234-1234567890.
Create a role assignment that grants the cluster service principal Contributor privileges to the disk encryption set by running the following command:
```
$ az role assignment create --assignee <cluster_service_principal_id> \1
     --role 'Contributor' \//
     --scope <disk_encryption_set_id> \2
```
1
Specifies the ID of the cluster service principal obtained in the previous step.
2
Specifies the ID of the disk encryption set.
Create a storage class that uses the user-managed disk encryption set:
1. Save the following storage class definition to a file, for example storage-class-definition.yaml:
```
kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
  name: managed-premium
provisioner: kubernetes.io/azure-disk
parameters:
  skuname: Premium_LRS
  kind: Managed
  diskEncryptionSetID: "<disk_encryption_set_ID>" 1
  resourceGroup: "<resource_group_name>" 2
reclaimPolicy: Delete
allowVolumeExpansion: true
volumeBindingMode: WaitForFirstConsumer
```
  1
  Specifies the ID of the disk encryption set that you created in the prerequisite steps, for example "/subscriptions/xxxxxx-xxxxx-xxxxx/resourceGroups/test-encryption/providers/Microsoft.Compute/diskEncryptionSets/disk-encryption-set-xxxxxx".
  2
  Specifies the name of the resource group used by the installer. This is the same resource group from the first step.
2. Create the storage class managed-premium from the file you created by running the following command:
```
$ oc create -f storage-class-definition.yaml
```
Select the managed-premium storage class when you create persistent volumes to use encrypted storage.

6.10.11. Installing the OpenShift CLI by downloading the binary

You can install the OpenShift CLI (oc) to interact with OpenShift Container Platform from a command-line interface. You can install oc on Linux, Windows, or macOS.

Important

If you installed an earlier version of oc, you cannot use it to complete all of the commands in OpenShift Container Platform 4.11. Download and install the new version of oc.

Installing the OpenShift CLI on Linux

You can install the OpenShift CLI (oc) binary on Linux by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the architecture in the Product Variant drop-down menu.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 Linux Client entry and save the file.
Unpack the archive:
```
$ tar xvf <file>
```
Place the oc binary in a directory that is on your PATH.
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
$ oc <command>
```

Installing the OpenShift CLI on Windows

You can install the OpenShift CLI (oc) binary on Windows by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 Windows Client entry and save the file.
Unzip the archive with a ZIP program.
Move the oc binary to a directory that is on your PATH.
To check your PATH, open the command prompt and execute the following command:
```
C:\> path
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
C:\> oc <command>
```

Installing the OpenShift CLI on macOS

You can install the OpenShift CLI (oc) binary on macOS by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 macOS Client entry and save the file.
Note
For macOS arm64, choose the OpenShift v4.11 macOS arm64 Client entry.
Unpack and unzip the archive.
Move the oc binary to a directory on your PATH.
To check your PATH, open a terminal and execute the following command:
```
$ echo $PATH
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
$ oc <command>
```

6.10.12. Logging in to the cluster by using the CLI

Prerequisites

You deployed an OpenShift Container Platform cluster.
You installed the oc CLI.

Procedure

Export the kubeadmin credentials:
```
$ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1
```
1
For <installation_directory>, specify the path to the directory that you stored the installation files in.
Verify you can run oc commands successfully using the exported configuration:
```
$ oc whoami
```
Example output
```
system:admin
```

Additional resources

See Accessing the web console for more details about accessing and understanding the OpenShift Container Platform web console.

6.10.13. Telemetry access for OpenShift Container Platform

Additional resources

See About remote health monitoring for more information about the Telemetry service

6.10.14. Next steps

Customize your cluster.
If necessary, you can opt out of remote health reporting.

6.11. Installing a cluster on Azure using ARM templates

In OpenShift Container Platform version 4.11, you can install a cluster on Microsoft Azure by using infrastructure that you provide.

Several Azure Resource Manager (ARM) templates are provided to assist in completing these steps or to help model your own.

Important

The steps for performing a user-provisioned infrastructure installation are provided as an example only. Installing a cluster with infrastructure you provide requires knowledge of the cloud provider and the installation process of OpenShift Container Platform. Several ARM templates are provided to assist in completing these steps or to help model your own. You are also free to create the required resources through other methods; the templates are just an example.

6.11.1. Prerequisites

You reviewed details about the OpenShift Container Platform installation and update processes.
You read the documentation on selecting a cluster installation method and preparing it for users.
You configured an Azure account to host the cluster.
You downloaded the Azure CLI and installed it on your computer. See Install the Azure CLI in the Azure documentation. The documentation below was last tested using version 2.38.0 of the Azure CLI. Azure CLI commands might perform differently based on the version you use.
If you use a firewall and plan to use the Telemetry service, you configured the firewall to allow the sites that your cluster requires access to.
If the cloud identity and access management (IAM) APIs are not accessible in your environment, or if you do not want to store an administrator-level credential secret in the kube-system namespace, you can manually create and maintain IAM credentials.
Note
Be sure to also review this site list if you are configuring a proxy.

6.11.2. Internet access for OpenShift Container Platform

In OpenShift Container Platform 4.11, you require access to the internet to install your cluster.

You must have internet access to:

Access OpenShift Cluster Manager Hybrid Cloud Console to download the installation program and perform subscription management. If the cluster has internet access and you do not disable Telemetry, that service automatically entitles your cluster.
Access Quay.io to obtain the packages that are required to install your cluster.
Obtain the packages that are required to perform cluster updates.

Important

6.11.3. Configuring your Azure project

Before you can install OpenShift Container Platform, you must configure an Azure project to host it.

Important

6.11.3.1. Azure account limits

Important

Default limits vary by offer category types, such as Free Trial and Pay-As-You-Go, and by series, such as Dv2, F, and G. For example, the default for Enterprise Agreement subscriptions is 350 cores.

Check the limits for your subscription type and if necessary, increase quota limits for your account before you install a default cluster on Azure.

The following table summarizes the Azure components whose limits can impact your ability to install and run OpenShift Container Platform clusters.

Component Number of components required by default Default Azure limit Description

vCPU

20 per region

A default cluster requires 40 vCPUs, so you must increase the account limit.

By default, each cluster creates the following instances:

One bootstrap machine, which is removed after installation
Three control plane machines
Three compute machines

OS Disk

VNet

1000 per region

Each default cluster requires one Virtual Network (VNet), which contains two subnets.

Network interfaces

65,536 per region

Each default cluster requires seven network interfaces. If you create more machines or your deployed workloads create load balancers, your cluster uses more network interfaces.

Network security groups

5000

Each cluster creates network security groups for each subnet in the VNet. The default cluster creates network security groups for the control plane and for the compute node subnets:

`controlplane`	Allows the control plane machines to be reached on port 6443 from anywhere
`node`	Allows worker nodes to be reached from the internet on ports 80 and 443

Network load balancers

1000 per region

Each cluster creates the following load balancers:

`default`	Public IP address that load balances requests to ports 80 and 443 across worker machines
`internal`	Private IP address that load balances requests to ports 6443 and 22623 across control plane machines
`external`	Public IP address that load balances requests to port 6443 across control plane machines

If your applications create more Kubernetes LoadBalancer service objects, your cluster uses more load balancers.

Public IP addresses

Private IP addresses

The internal load balancer, each of the three control plane machines, and each of the three worker machines each use a private IP address.

Spot VM vCPUs (optional)

If you configure spot VMs, your cluster must have two spot VM vCPUs for every compute node.

20 per region

This is an optional component. To use spot VMs, you must increase the Azure default limit to at least twice the number of compute nodes in your cluster.

Note

Using spot VMs for control plane nodes is not recommended.

Additional resources

Optimizing storage.

6.11.3.2. Configuring a public DNS zone in Azure

Procedure

Identify your domain, or subdomain, and registrar. You can transfer an existing domain and registrar or obtain a new one through Azure or another source.
Note
For more information about purchasing domains through Azure, see Buy a custom domain name for Azure App Service in the Azure documentation.
If you are using an existing domain and registrar, migrate its DNS to Azure. See Migrate an active DNS name to Azure App Service in the Azure documentation.
Configure DNS for your domain. Follow the steps in the Tutorial: Host your domain in Azure DNS in the Azure documentation to create a public hosted zone for your domain or subdomain, extract the new authoritative name servers, and update the registrar records for the name servers that your domain uses.
Use an appropriate root domain, such as openshiftcorp.com, or subdomain, such as clusters.openshiftcorp.com.
If you use a subdomain, follow your company’s procedures to add its delegation records to the parent domain.

You can view Azure’s DNS solution by visiting this example for creating DNS zones.

6.11.3.3. Increasing Azure account limits

To increase an account limit, file a support request on the Azure portal.

Note

You can increase only one type of quota per support request.

Procedure

From the Azure portal, click Help + support in the lower left corner.
Click New support request and then select the required values:
1. From the Issue type list, select Service and subscription limits (quotas).
2. From the Subscription list, select the subscription to modify.
3. From the Quota type list, select the quota to increase. For example, select Compute-VM (cores-vCPUs) subscription limit increases to increase the number of vCPUs, which is required to install a cluster.
4. Click Next: Solutions.
On the Problem Details page, provide the required information for your quota increase:
1. Click Provide details and provide the required details in the Quota details window.
2. In the SUPPORT METHOD and CONTACT INFO sections, provide the issue severity and your contact details.
Click Next: Review + create and then click Create.

6.11.3.4. Certificate signing requests management

Because your cluster has limited access to automatic machine management when you use infrastructure that you provision, you must provide a mechanism for approving cluster certificate signing requests (CSRs) after installation. The kube-controller-manager only approves the kubelet client CSRs. The machine-approver cannot guarantee the validity of a serving certificate that is requested by using kubelet credentials because it cannot confirm that the correct machine issued the request. You must determine and implement a method of verifying the validity of the kubelet serving certificate requests and approving them.

6.11.3.5. Required Azure roles

OpenShift Container Platform needs a service principal so it can manage Microsoft Azure resources. Before you can create a service principal, review the following information:

Your Azure account subscription must have the following roles:

User Access Administrator
Contributor

Your Azure Active Directory (AD) must have the following permission:

"microsoft.directory/servicePrincipals/createAsOwner"

To set roles on the Azure portal, see the Manage access to Azure resources using RBAC and the Azure portal in the Azure documentation.

6.11.3.6. Creating a service principal

Because OpenShift Container Platform and its installation program create Microsoft Azure resources by using the Azure Resource Manager, you must create a service principal to represent it.

Prerequisites

Install or update the Azure CLI.
Your Azure account has the required roles for the subscription that you use.

Procedure

If your Azure account uses subscriptions, ensure that you are using the right subscription:

View the list of available accounts and record the tenantId value for the subscription you want to use for your cluster:

$ az account list --refresh

Example output

[
  {
    "cloudName": "AzureCloud",
    "id": "9bab1460-96d5-40b3-a78e-17b15e978a80",
    "isDefault": true,
    "name": "Subscription Name",
    "state": "Enabled",
    "tenantId": "6057c7e9-b3ae-489d-a54e-de3f6bf6a8ee",
    "user": {
      "name": "you@example.com",
      "type": "user"
    }
  }
]

View your active account details and confirm that the tenantId value matches the subscription you want to use:

$ az account show

Example output

{
  "environmentName": "AzureCloud",
  "id": "9bab1460-96d5-40b3-a78e-17b15e978a80",
  "isDefault": true,
  "name": "Subscription Name",
  "state": "Enabled",
  "tenantId": "6057c7e9-b3ae-489d-a54e-de3f6bf6a8ee", 1
  "user": {
    "name": "you@example.com",
    "type": "user"
  }
}

1: Ensure that the value of the tenantId parameter is the correct subscription ID.

If you are not using the right subscription, change the active subscription:
```
$ az account set -s <subscription_id> 1
```
1
Specify the subscription ID.

Verify the subscription ID update:

$ az account show

Example output

{
  "environmentName": "AzureCloud",
  "id": "33212d16-bdf6-45cb-b038-f6565b61edda",
  "isDefault": true,
  "name": "Subscription Name",
  "state": "Enabled",
  "tenantId": "8049c7e9-c3de-762d-a54e-dc3f6be6a7ee",
  "user": {
    "name": "you@example.com",
    "type": "user"
  }
}

Record the tenantId and id parameter values from the output. You need these values during the OpenShift Container Platform installation.

Create the service principal for your account:

$ az ad sp create-for-rbac --role Contributor --name <service_principal> \ 1
  --scopes /subscriptions/<subscription_id> 2
  --years <years> 3

1: Specify the service principal name.
2: Specify the subscription ID.
3: Specify the number of years. By default, a service principal expires in one year. By using the --years option you can extend the validity of your service principal.

Example output

Creating 'Contributor' role assignment under scope '/subscriptions/<subscription_id>'
The output includes credentials that you must protect. Be sure that you do not
include these credentials in your code or check the credentials into your source
control. For more information, see https://aka.ms/azadsp-cli
{
  "appId": "ac461d78-bf4b-4387-ad16-7e32e328aec6",
  "displayName": <service_principal>",
  "password": "00000000-0000-0000-0000-000000000000",
  "tenantId": "8049c7e9-c3de-762d-a54e-dc3f6be6a7ee"
}

Record the values of the appId and password parameters from the previous output. You need these values during OpenShift Container Platform installation.

Assign the User Access Administrator role by running the following command:

$ az role assignment create --role "User Access Administrator" \
  --assignee-object-id $(az ad sp show --id <appId> --query id -o tsv) 1

1: Specify the appId parameter value for your service principal.

Additional resources

For more information about CCO modes, see About the Cloud Credential Operator.

6.11.3.7. Supported Azure regions

The installation program dynamically generates the list of available Microsoft Azure regions based on your subscription.

Supported Azure public regions

australiacentral (Australia Central)
australiaeast (Australia East)
australiasoutheast (Australia South East)
brazilsouth (Brazil South)
canadacentral (Canada Central)
canadaeast (Canada East)
centralindia (Central India)
centralus (Central US)
eastasia (East Asia)
eastus (East US)
eastus2 (East US 2)
francecentral (France Central)
germanywestcentral (Germany West Central)
israelcentral (Israel Central)
italynorth (Italy North)
japaneast (Japan East)
japanwest (Japan West)
koreacentral (Korea Central)
koreasouth (Korea South)
northcentralus (North Central US)
northeurope (North Europe)
norwayeast (Norway East)
polandcentral (Poland Central)
qatarcentral (Qatar Central)
southafricanorth (South Africa North)
southcentralus (South Central US)
southeastasia (Southeast Asia)
southindia (South India)
swedencentral (Sweden Central)
switzerlandnorth (Switzerland North)
uaenorth (UAE North)
uksouth (UK South)
ukwest (UK West)
westcentralus (West Central US)
westeurope (West Europe)
westindia (West India)
westus (West US)
westus2 (West US 2)
westus3 (West US 3)

Supported Azure Government regions

Support for the following Microsoft Azure Government (MAG) regions was added in OpenShift Container Platform version 4.6:

usgovtexas (US Gov Texas)
usgovvirginia (US Gov Virginia)

You can reference all available MAG regions in the Azure documentation. Other provided MAG regions are expected to work with OpenShift Container Platform, but have not been tested.

6.11.4. Requirements for a cluster with user-provisioned infrastructure

For a cluster that contains user-provisioned infrastructure, you must deploy all of the required machines.

This section describes the requirements for deploying OpenShift Container Platform on user-provisioned infrastructure.

6.11.4.1. Required machines for cluster installation

The smallest OpenShift Container Platform clusters require the following hosts:

Table 6.36. Minimum required hosts
Hosts	Description
One temporary bootstrap machine	The cluster requires the bootstrap machine to deploy the OpenShift Container Platform cluster on the three control plane machines. You can remove the bootstrap machine after you install the cluster.
Three control plane machines	The control plane machines run the Kubernetes and OpenShift Container Platform services that form the control plane.
At least two compute machines, which are also known as worker machines.	The workloads requested by OpenShift Container Platform users run on the compute machines.

Important

To maintain high availability of your cluster, use separate physical hosts for these cluster machines.

The bootstrap and control plane machines must use Red Hat Enterprise Linux CoreOS (RHCOS) as the operating system. However, the compute machines can choose between Red Hat Enterprise Linux CoreOS (RHCOS), Red Hat Enterprise Linux (RHEL) 8.6 and later.

Note that RHCOS is based on Red Hat Enterprise Linux (RHEL) 8 and inherits all of its hardware certifications and requirements. See Red Hat Enterprise Linux technology capabilities and limits.

6.11.4.2. Minimum resource requirements for cluster installation

Each cluster machine must meet the following minimum requirements:

Table 6.37. Minimum resource requirements
Machine	Operating System	vCPU ^[1]	Virtual RAM	Storage	IOPS ^[2]
Bootstrap	RHCOS	4	16 GB	100 GB	300
Control plane	RHCOS	4	16 GB	100 GB	300
Compute	RHCOS, RHEL 8.6 and later ^[3]	2	8 GB	100 GB	300

One vCPU is equivalent to one physical core when simultaneous multithreading (SMT), or hyperthreading, is not enabled. When enabled, use the following formula to calculate the corresponding ratio: (threads per core × cores) × sockets = vCPUs.
OpenShift Container Platform and Kubernetes are sensitive to disk performance, and faster storage is recommended, particularly for etcd on the control plane nodes which require a 10 ms p99 fsync duration. Note that on many cloud platforms, storage size and IOPS scale together, so you might need to over-allocate storage volume to obtain sufficient performance.
As with all user-provisioned installations, if you choose to use RHEL compute machines in your cluster, you take responsibility for all operating system life cycle management and maintenance, including performing system updates, applying patches, and completing all other required tasks. Use of RHEL 7 compute machines is deprecated and has been removed in OpenShift Container Platform 4.10 and later.

Important

You are required to use Azure virtual machines that have the premiumIO parameter set to true.

If an instance type for your platform meets the minimum requirements for cluster machines, it is supported to use in OpenShift Container Platform.

Additional resources

Optimizing storage

6.11.4.3. Tested instance types for Azure

The following Microsoft Azure instance types have been tested with OpenShift Container Platform.

Example 6.6. Machine types

c4.*
c5.*
c5a.*
i3.*
m4.*
m5.*
m5a.*
m6a.*
m6i.*
r4.*
r5.*
r5a.*
r6i.*
t3.*
t3a.*

6.11.5. Selecting an Azure Marketplace image

While the images are the same, the Azure Marketplace publisher is different depending on your region. If you are located in North America, specify redhat as the publisher. If you are located in EMEA, specify redhat-limited as the publisher.
The offer includes a rh-ocp-worker SKU and a rh-ocp-worker-gen1 SKU. The rh-ocp-worker SKU represents a Hyper-V generation version 2 VM image. The default instance types used in OpenShift Container Platform are version 2 compatible. If you are going to use an instance type that is only version 1 compatible, use the image associated with the rh-ocp-worker-gen1 SKU. The rh-ocp-worker-gen1 SKU represents a Hyper-V version 1 VM image.

Prerequisites

You have installed the Azure CLI client (az).
Your Azure account is entitled for the offer and you have logged into this account with the Azure CLI client.

Procedure

Display all of the available OpenShift Container Platform images by running one of the following commands:

North America:

$  az vm image list --all --offer rh-ocp-worker --publisher redhat -o table

Example output

Offer          Publisher       Sku                 Urn                                                             Version
-------------  --------------  ------------------  --------------------------------------------------------------  --------------
rh-ocp-worker  RedHat          rh-ocp-worker       RedHat:rh-ocp-worker:rh-ocpworker:4.8.2021122100               4.8.2021122100
rh-ocp-worker  RedHat          rh-ocp-worker-gen1  RedHat:rh-ocp-worker:rh-ocp-worker-gen1:4.8.2021122100         4.8.2021122100

EMEA:

$  az vm image list --all --offer rh-ocp-worker --publisher redhat-limited -o table

Example output

Offer          Publisher       Sku                 Urn                                                             Version
-------------  --------------  ------------------  --------------------------------------------------------------  --------------
rh-ocp-worker  redhat-limited  rh-ocp-worker       redhat-limited:rh-ocp-worker:rh-ocp-worker:4.8.2021122100       4.8.2021122100
rh-ocp-worker  redhat-limited  rh-ocp-worker-gen1  redhat-limited:rh-ocp-worker:rh-ocp-worker-gen1:4.8.2021122100  4.8.2021122100

Note

Inspect the image for your offer by running one of the following commands:

North America:

$ az vm image show --urn redhat:rh-ocp-worker:rh-ocp-worker:<version>

EMEA:

$ az vm image show --urn redhat-limited:rh-ocp-worker:rh-ocp-worker:<version>

Review the terms of the offer by running one of the following commands:

North America:

$ az vm image terms show --urn redhat:rh-ocp-worker:rh-ocp-worker:<version>

EMEA:

$ az vm image terms show --urn redhat-limited:rh-ocp-worker:rh-ocp-worker:<version>

Accept the terms of the offering by running one of the following commands:

North America:

$ az vm image terms accept --urn redhat:rh-ocp-worker:rh-ocp-worker:<version>

EMEA:

$ az vm image terms accept --urn redhat-limited:rh-ocp-worker:rh-ocp-worker:<version>

Record the image details of your offer. If you use the Azure Resource Manager (ARM) template to deploy your worker nodes:

Update storageProfile.imageReference by deleting the id parameter and adding the offer, publisher, sku, and version parameters by using the values from your offer.

Specify a plan for the virtual machines (VMs).

Example 06_workers.json ARM template with an updated storageProfile.imageReference object and a specified plan

...
  "plan" : {
    "name": "rh-ocp-worker",
    "product": "rh-ocp-worker",
    "publisher": "redhat"
  },
  "dependsOn" : [
    "[concat('Microsoft.Network/networkInterfaces/', concat(variables('vmNames')[copyIndex()], '-nic'))]"
  ],
  "properties" : {
...
  "storageProfile": {
    "imageReference": {
    "offer": "rh-ocp-worker",
    "publisher": "redhat",
    "sku": "rh-ocp-worker",
    "version": "4.8.2021122100"
    }
    ...
   }
...
  }

6.11.6. Obtaining the installation program

Before you install OpenShift Container Platform, download the installation file on a local computer.

Prerequisites

You have a computer that runs Linux or macOS, with 500 MB of local disk space.

Procedure

Access the Infrastructure Provider page on the OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.
Select your infrastructure provider.
Navigate to the page for your installation type, download the installation program that corresponds with your host operating system and architecture, and place the file in the directory where you will store the installation configuration files.
Important
The installation program creates several files on the computer that you use to install your cluster. You must keep the installation program and the files that the installation program creates after you finish installing the cluster. Both files are required to delete the cluster.
Important
Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. To remove your cluster, complete the OpenShift Container Platform uninstallation procedures for your specific cloud provider.
Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:
```
$ tar -xvf openshift-install-linux.tar.gz
```
Download your installation pull secret from the Red Hat OpenShift Cluster Manager. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

6.11.7. Generating a key pair for cluster node SSH access

Important

Do not skip this procedure in production environments, where disaster recovery and debugging is required.

Note

You must use a local key, not one that you configured with platform-specific approaches such as AWS key pairs.

Procedure

If you do not have an existing SSH key pair on your local machine to use for authentication onto your cluster nodes, create one. For example, on a computer that uses a Linux operating system, run the following command:
```
$ ssh-keygen -t ed25519 -N '' -f <path>/<file_name> 1
```
1
Specify the path and file name, such as ~/.ssh/id_ed25519, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.
Note
If you plan to install an OpenShift Container Platform cluster that uses FIPS validated or Modules In Process cryptographic libraries on the x86_64 architecture, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.
View the public SSH key:
```
$ cat <path>/<file_name>.pub
```
For example, run the following to view the ~/.ssh/id_ed25519.pub public key:
```
$ cat ~/.ssh/id_ed25519.pub
```
Add the SSH private key identity to the SSH agent for your local user, if it has not already been added. SSH agent management of the key is required for password-less SSH authentication onto your cluster nodes, or if you want to use the ./openshift-install gather command.
Note
On some distributions, default SSH private key identities such as ~/.ssh/id_rsa and ~/.ssh/id_dsa are managed automatically.
1. If the ssh-agent process is not already running for your local user, start it as a background task:
```
$ eval "$(ssh-agent -s)"
```
  Example output
```
Agent pid 31874
```
  Note
  If your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.
Add your SSH private key to the ssh-agent:
```
$ ssh-add <path>/<file_name> 1
```
1
Specify the path and file name for your SSH private key, such as ~/.ssh/id_ed25519
Example output
```
Identity added: /home/<you>/<path>/<file_name> (<computer_name>)
```

Next steps

When you install OpenShift Container Platform, provide the SSH public key to the installation program. If you install a cluster on infrastructure that you provision, you must provide the key to the installation program.

6.11.8. Creating the installation files for Azure

To install OpenShift Container Platform on Microsoft Azure using user-provisioned infrastructure, you must generate the files that the installation program needs to deploy your cluster and modify them so that the cluster creates only the machines that it will use. You generate and customize the install-config.yaml file, Kubernetes manifests, and Ignition config files. You also have the option to first set up a separate var partition during the preparation phases of installation.

6.11.8.1. Optional: Creating a separate `/var` partition

It is recommended that disk partitioning for OpenShift Container Platform be left to the installer. However, there are cases where you might want to create separate partitions in a part of the filesystem that you expect to grow.

OpenShift Container Platform supports the addition of a single partition to attach storage to either the /var partition or a subdirectory of /var. For example:

/var/lib/containers: Holds container-related content that can grow as more images and containers are added to a system.
/var/lib/etcd: Holds data that you might want to keep separate for purposes such as performance optimization of etcd storage.
/var: Holds data that you might want to keep separate for purposes such as auditing.

Storing the contents of a /var directory separately makes it easier to grow storage for those areas as needed and reinstall OpenShift Container Platform at a later date and keep that data intact. With this method, you will not have to pull all your containers again, nor will you have to copy massive log files when you update systems.

Because /var must be in place before a fresh installation of Red Hat Enterprise Linux CoreOS (RHCOS), the following procedure sets up the separate /var partition by creating a machine config manifest that is inserted during the openshift-install preparation phases of an OpenShift Container Platform installation.

Important

If you follow the steps to create a separate /var partition in this procedure, it is not necessary to create the Kubernetes manifest and Ignition config files again as described later in this section.

Procedure

Create a directory to hold the OpenShift Container Platform installation files:
```
$ mkdir $HOME/clusterconfig
```

Run openshift-install to create a set of files in the manifest and openshift subdirectories. Answer the system questions as you are prompted:

$ openshift-install create manifests --dir $HOME/clusterconfig

Example output

? SSH Public Key ...
INFO Credentials loaded from the "myprofile" profile in file "/home/myuser/.aws/credentials"
INFO Consuming Install Config from target directory
INFO Manifests created in: $HOME/clusterconfig/manifests and $HOME/clusterconfig/openshift

Optional: Confirm that the installation program created manifests in the clusterconfig/openshift directory:

$ ls $HOME/clusterconfig/openshift/

Example output

99_kubeadmin-password-secret.yaml
99_openshift-cluster-api_master-machines-0.yaml
99_openshift-cluster-api_master-machines-1.yaml
99_openshift-cluster-api_master-machines-2.yaml
...

Create a Butane config that configures the additional partition. For example, name the file $HOME/clusterconfig/98-var-partition.bu, change the disk device name to the name of the storage device on the worker systems, and set the storage size as appropriate. This example places the /var directory on a separate partition:
```
variant: openshift
version: 4.11.0
metadata:
  labels:
    machineconfiguration.openshift.io/role: worker
  name: 98-var-partition
storage:
  disks:
  - device: /dev/<device_name> 1
    partitions:
    - label: var
      start_mib: <partition_start_offset> 2
      size_mib: <partition_size> 3
  filesystems:
    - device: /dev/disk/by-partlabel/var
      path: /var
      format: xfs
      mount_options: [defaults, prjquota] 4
      with_mount_unit: true
```
1
The storage device name of the disk that you want to partition.
2
When adding a data partition to the boot disk, a minimum value of 25000 MiB (Mebibytes) is recommended. The root file system is automatically resized to fill all available space up to the specified offset. If no value is specified, or if the specified value is smaller than the recommended minimum, the resulting root file system will be too small, and future reinstalls of RHCOS might overwrite the beginning of the data partition.
3
The size of the data partition in mebibytes.
4
The prjquota mount option must be enabled for filesystems used for container storage.
Note
When creating a separate /var partition, you cannot use different instance types for worker nodes, if the different instance types do not have the same device name.
Create a manifest from the Butane config and save it to the clusterconfig/openshift directory. For example, run the following command:
```
$ butane $HOME/clusterconfig/98-var-partition.bu -o $HOME/clusterconfig/openshift/98-var-partition.yaml
```

Run openshift-install again to create Ignition configs from a set of files in the manifest and openshift subdirectories:

$ openshift-install create ignition-configs --dir $HOME/clusterconfig
$ ls $HOME/clusterconfig/
auth  bootstrap.ign  master.ign  metadata.json  worker.ign

Now you can use the Ignition config files as input to the installation procedures to install Red Hat Enterprise Linux CoreOS (RHCOS) systems.

6.11.8.2. Creating the installation configuration file

You can customize the OpenShift Container Platform cluster you install on Microsoft Azure.

Prerequisites

Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.
Obtain service principal permissions at the subscription level.

Procedure

Create the install-config.yaml file.
1. Change to the directory that contains the installation program and run the following command:
```
$ ./openshift-install create install-config --dir <installation_directory> 1
```
  1
  For <installation_directory>, specify the directory name to store the files that the installation program creates.
  When specifying the directory:
  - Verify that the directory has the execute permission. This permission is required to run Terraform binaries under the installation directory.
  - Use an empty directory. Some installation assets, such as bootstrap X.509 certificates, have short expiration intervals, therefore you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.
2. At the prompts, provide the configuration details for your cloud:
  1. Optional: Select an SSH key to use to access your cluster machines.
    Note
    For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.
  2. Select azure as the platform to target.
  3. If you do not have a Microsoft Azure profile stored on your computer, specify the following Azure parameter values for your subscription and service principal:
    azure subscription id: The subscription ID to use for the cluster. Specify the id value in your account output.
    azure tenant id: The tenant ID. Specify the tenantId value in your account output.
    azure service principal client id: The value of the appId parameter for the service principal.
    azure service principal client secret: The value of the password parameter for the service principal.
  4. Select the region to deploy the cluster to.
  5. Select the base domain to deploy the cluster to. The base domain corresponds to the Azure DNS Zone that you created for your cluster.
  6. Enter a descriptive name for your cluster.
    Important
    All Azure resources that are available through public endpoints are subject to resource name restrictions, and you cannot create resources that use certain terms. For a list of terms that Azure restricts, see Resolve reserved resource name errors in the Azure documentation.
  7. Paste the pull secret from the Red Hat OpenShift Cluster Manager.
3. Optional: If you do not want the cluster to provision compute machines, empty the compute pool by editing the resulting install-config.yaml file to set replicas to 0 for the compute pool:
```
compute:
- hyperthreading: Enabled
  name: worker
  platform: {}
  replicas: 0 1
```
  1
  Set to 0.
Modify the install-config.yaml file. You can find more information about the available parameters in the "Installation configuration parameters" section.
Back up the install-config.yaml file so that you can use it to install multiple clusters.
Important
The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

6.11.8.3. Configuring the cluster-wide proxy during installation

Prerequisites

You have an existing install-config.yaml file.
You reviewed the sites that your cluster requires access to and determined whether any of them need to bypass the proxy. By default, all cluster egress traffic is proxied, including calls to hosting cloud provider APIs. You added sites to the Proxy object’s spec.noProxy field to bypass the proxy if necessary.
Note
The Proxy object status.noProxy field is populated with the values of the networking.machineNetwork[].cidr, networking.clusterNetwork[].cidr, and networking.serviceNetwork[] fields from your installation configuration.
For installations on Amazon Web Services (AWS), Google Cloud Platform (GCP), Microsoft Azure, and Red Hat OpenStack Platform (RHOSP), the Proxy object status.noProxy field is also populated with the instance metadata endpoint (169.254.169.254).

Procedure

Edit your install-config.yaml file and add the proxy settings. For example:
```
apiVersion: v1
baseDomain: my.domain.com
proxy:
  httpProxy: http://<username>:<pswd>@<ip>:<port> 1
  httpsProxy: https://<username>:<pswd>@<ip>:<port> 2
  noProxy: example.com 3
additionalTrustBundle: | 4
    -----BEGIN CERTIFICATE-----
    <MY_TRUSTED_CA_CERT>
    -----END CERTIFICATE-----
```
1
A proxy URL to use for creating HTTP connections outside the cluster. The URL scheme must be http.
2
A proxy URL to use for creating HTTPS connections outside the cluster.
3
A comma-separated list of destination domain names, IP addresses, or other network CIDRs to exclude from proxying. Preface a domain with . to match subdomains only. For example, .y.com matches x.y.com, but not y.com. Use * to bypass the proxy for all destinations.
4
If provided, the installation program generates a config map that is named user-ca-bundle in the openshift-config namespace that contains one or more additional CA certificates that are required for proxying HTTPS connections. The Cluster Network Operator then creates a trusted-ca-bundle config map that merges these contents with the Red Hat Enterprise Linux CoreOS (RHCOS) trust bundle, and this config map is referenced in the trustedCA field of the Proxy object. The additionalTrustBundle field is required unless the proxy’s identity certificate is signed by an authority from the RHCOS trust bundle.
Note
The installation program does not support the proxy readinessEndpoints field.
Note
If the installer times out, restart and then complete the deployment by using the wait-for command of the installer. For example:
```
$ ./openshift-install wait-for install-complete --log-level debug
```
Save the file and reference it when installing OpenShift Container Platform.

Note

Only the Proxy object named cluster is supported, and no additional proxies can be created.

6.11.8.4. Exporting common variables for ARM templates

You must export a common set of variables that are used with the provided Azure Resource Manager (ARM) templates used to assist in completing a user-provided infrastructure install on Microsoft Azure.

Note

Specific ARM templates can also require additional exported variables, which are detailed in their related procedures.

Prerequisites

Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.

Procedure

Export common variables found in the install-config.yaml to be used by the provided ARM templates:
```
$ export CLUSTER_NAME=<cluster_name>1
$ export AZURE_REGION=<azure_region>2
$ export SSH_KEY=<ssh_key>3
$ export BASE_DOMAIN=<base_domain>4
$ export BASE_DOMAIN_RESOURCE_GROUP=<base_domain_resource_group>5
```
1
The value of the .metadata.name attribute from the install-config.yaml file.
2
The region to deploy the cluster into, for example centralus. This is the value of the .platform.azure.region attribute from the install-config.yaml file.
3
The SSH RSA public key file as a string. You must enclose the SSH key in quotes since it contains spaces. This is the value of the .sshKey attribute from the install-config.yaml file.
4
The base domain to deploy the cluster to. The base domain corresponds to the public DNS zone that you created for your cluster. This is the value of the .baseDomain attribute from the install-config.yaml file.
5
The resource group where the public DNS zone exists. This is the value of the .platform.azure.baseDomainResourceGroupName attribute from the install-config.yaml file.
For example:
```
$ export CLUSTER_NAME=test-cluster
$ export AZURE_REGION=centralus
$ export SSH_KEY="ssh-rsa xxx/xxx/xxx= user@email.com"
$ export BASE_DOMAIN=example.com
$ export BASE_DOMAIN_RESOURCE_GROUP=ocp-cluster
```
Export the kubeadmin credentials:
```
$ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1
```
1
For <installation_directory>, specify the path to the directory that you stored the installation files in.

6.11.8.5. Creating the Kubernetes manifest and Ignition config files

Because you must modify some cluster definition files and manually start the cluster machines, you must generate the Kubernetes manifest and Ignition config files that the cluster needs to configure the machines.

The installation configuration file transforms into the Kubernetes manifests. The manifests wrap into the Ignition configuration files, which are later used to configure the cluster machines.

Important

The Ignition config files that the OpenShift Container Platform installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.
It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.

Prerequisites

You obtained the OpenShift Container Platform installation program.
You created the install-config.yaml installation configuration file.

Procedure

Change to the directory that contains the OpenShift Container Platform installation program and generate the Kubernetes manifests for the cluster:
```
$ ./openshift-install create manifests --dir <installation_directory> 1
```
1
For <installation_directory>, specify the installation directory that contains the install-config.yaml file you created.
Remove the Kubernetes manifest files that define the control plane machines:
```
$ rm -f <installation_directory>/openshift/99_openshift-cluster-api_master-machines-*.yaml
```
By removing these files, you prevent the cluster from automatically generating control plane machines.
Remove the Kubernetes manifest files that define the worker machines:
```
$ rm -f <installation_directory>/openshift/99_openshift-cluster-api_worker-machineset-*.yaml
```
Because you create and manage the worker machines yourself, you do not need to initialize these machines.
Check that the mastersSchedulable parameter in the <installation_directory>/manifests/cluster-scheduler-02-config.yml Kubernetes manifest file is set to false. This setting prevents pods from being scheduled on the control plane machines:
1. Open the <installation_directory>/manifests/cluster-scheduler-02-config.yml file.
2. Locate the mastersSchedulable parameter and ensure that it is set to false.
3. Save and exit the file.
Optional: If you do not want the Ingress Operator to create DNS records on your behalf, remove the privateZone and publicZone sections from the <installation_directory>/manifests/cluster-dns-02-config.yml DNS configuration file:
```
apiVersion: config.openshift.io/v1
kind: DNS
metadata:
  creationTimestamp: null
  name: cluster
spec:
  baseDomain: example.openshift.com
  privateZone: 1
    id: mycluster-100419-private-zone
  publicZone: 2
    id: example.openshift.com
status: {}
```
1 2
Remove this section completely.
If you do so, you must add ingress DNS records manually in a later step.
When configuring Azure on user-provisioned infrastructure, you must export some common variables defined in the manifest files to use later in the Azure Resource Manager (ARM) templates:
1. Export the infrastructure ID by using the following command:
```
$ export INFRA_ID=<infra_id> 1
```
  1
  The OpenShift Container Platform cluster has been assigned an identifier (INFRA_ID) in the form of <cluster_name>-<random_string>. This will be used as the base name for most resources created using the provided ARM templates. This is the value of the .status.infrastructureName attribute from the manifests/cluster-infrastructure-02-config.yml file.
2. Export the resource group by using the following command:
```
$ export RESOURCE_GROUP=<resource_group> 1
```
  1
  All resources created in this Azure deployment exists as part of a resource group. The resource group name is also based on the INFRA_ID, in the form of <cluster_name>-<random_string>-rg. This is the value of the .status.platformStatus.azure.resourceGroupName attribute from the manifests/cluster-infrastructure-02-config.yml file.
To create the Ignition configuration files, run the following command from the directory that contains the installation program:
```
$ ./openshift-install create ignition-configs --dir <installation_directory> 1
```
1
For <installation_directory>, specify the same installation directory.
Ignition config files are created for the bootstrap, control plane, and compute nodes in the installation directory. The kubeadmin-password and kubeconfig files are created in the ./<installation_directory>/auth directory:
```
.
├── auth
│   ├── kubeadmin-password
│   └── kubeconfig
├── bootstrap.ign
├── master.ign
├── metadata.json
└── worker.ign
```

6.11.9. Creating the Azure resource group

You must create a Microsoft Azure resource group and an identity for that resource group. These are both used during the installation of your OpenShift Container Platform cluster on Azure.

Prerequisites

Configure an Azure account.
Generate the Ignition config files for your cluster.

Procedure

Create the resource group in a supported Azure region:

$ az group create --name ${RESOURCE_GROUP} --location ${AZURE_REGION}

Create an Azure identity for the resource group:
```
$ az identity create -g ${RESOURCE_GROUP} -n ${INFRA_ID}-identity
```
This is used to grant the required access to Operators in your cluster. For example, this allows the Ingress Operator to create a public IP and its load balancer. You must assign the Azure identity to a role.

Grant the Contributor role to the Azure identity:

Export the following variables required by the Azure role assignment:

$ export PRINCIPAL_ID=`az identity show -g ${RESOURCE_GROUP} -n ${INFRA_ID}-identity --query principalId --out tsv`

$ export RESOURCE_GROUP_ID=`az group show -g ${RESOURCE_GROUP} --query id --out tsv`

Assign the Contributor role to the identity:

$ az role assignment create --assignee "${PRINCIPAL_ID}" --role 'Contributor' --scope "${RESOURCE_GROUP_ID}"

6.11.10. Uploading the RHCOS cluster image and bootstrap Ignition config file

The Azure client does not support deployments based on files existing locally. You must copy and store the RHCOS virtual hard disk (VHD) cluster image and bootstrap Ignition config file in a storage container so they are accessible during deployment.

Prerequisites

Configure an Azure account.
Generate the Ignition config files for your cluster.

Procedure

Create an Azure storage account to store the VHD cluster image:
```
$ az storage account create -g ${RESOURCE_GROUP} --location ${AZURE_REGION} --name ${CLUSTER_NAME}sa --kind Storage --sku Standard_LRS
```
Warning
The Azure storage account name must be between 3 and 24 characters in length and use numbers and lower-case letters only. If your CLUSTER_NAME variable does not follow these restrictions, you must manually define the Azure storage account name. For more information on Azure storage account name restrictions, see Resolve errors for storage account names in the Azure documentation.

Export the storage account key as an environment variable:

$ export ACCOUNT_KEY=`az storage account keys list -g ${RESOURCE_GROUP} --account-name ${CLUSTER_NAME}sa --query "[0].value" -o tsv`

Export the URL of the RHCOS VHD to an environment variable:
```
$ export VHD_URL=`openshift-install coreos print-stream-json | jq -r '.architectures.x86_64."rhel-coreos-extensions"."azure-disk".url'`
```
Important
The RHCOS images might not change with every release of OpenShift Container Platform. You must specify an image with the highest version that is less than or equal to the OpenShift Container Platform version that you install. Use the image version that matches your OpenShift Container Platform version if it is available.

Create the storage container for the VHD:

$ az storage container create --name vhd --account-name ${CLUSTER_NAME}sa --account-key ${ACCOUNT_KEY}

Copy the local VHD to a blob:

$ az storage blob copy start --account-name ${CLUSTER_NAME}sa --account-key ${ACCOUNT_KEY} --destination-blob "rhcos.vhd" --destination-container vhd --source-uri "${VHD_URL}"

Create a blob storage container and upload the generated bootstrap.ign file:

$ az storage container create --name files --account-name ${CLUSTER_NAME}sa --account-key ${ACCOUNT_KEY}

$ az storage blob upload --account-name ${CLUSTER_NAME}sa --account-key ${ACCOUNT_KEY} -c "files" -f "<installation_directory>/bootstrap.ign" -n "bootstrap.ign"

6.11.11. Example for creating DNS zones

DNS records are required for clusters that use user-provisioned infrastructure. You should choose the DNS strategy that fits your scenario.

For this example, Azure’s DNS solution is used, so you will create a new public DNS zone for external (internet) visibility and a private DNS zone for internal cluster resolution.

Note

The public DNS zone is not required to exist in the same resource group as the cluster deployment and might already exist in your organization for the desired base domain. If that is the case, you can skip creating the public DNS zone; be sure the installation config you generated earlier reflects that scenario.

Prerequisites

Configure an Azure account.
Generate the Ignition config files for your cluster.

Procedure

Create the new public DNS zone in the resource group exported in the BASE_DOMAIN_RESOURCE_GROUP environment variable:
```
$ az network dns zone create -g ${BASE_DOMAIN_RESOURCE_GROUP} -n ${CLUSTER_NAME}.${BASE_DOMAIN}
```
You can skip this step if you are using a public DNS zone that already exists.

Create the private DNS zone in the same resource group as the rest of this deployment:

$ az network private-dns zone create -g ${RESOURCE_GROUP} -n ${CLUSTER_NAME}.${BASE_DOMAIN}

You can learn more about configuring a public DNS zone in Azure by visiting that section.

6.11.12. Creating a VNet in Azure

You must create a virtual network (VNet) in Microsoft Azure for your OpenShift Container Platform cluster to use. You can customize the VNet to meet your requirements. One way to create the VNet is to modify the provided Azure Resource Manager (ARM) template.

Note

If you do not use the provided ARM template to create your Azure infrastructure, you must review the provided information and manually create the infrastructure. If your cluster does not initialize correctly, you might have to contact Red Hat support with your installation logs.

Prerequisites

Configure an Azure account.
Generate the Ignition config files for your cluster.

Procedure

Copy the template from the ARM template for the VNet section of this topic and save it as 01_vnet.json in your cluster’s installation directory. This template describes the VNet that your cluster requires.

Create the deployment by using the az CLI:

$ az deployment group create -g ${RESOURCE_GROUP} \
  --template-file "<installation_directory>/01_vnet.json" \
  --parameters baseName="${INFRA_ID}"1

1: The base name to be used in resource names; this is usually the cluster’s infrastructure ID.

Link the VNet template to the private DNS zone:

$ az network private-dns link vnet create -g ${RESOURCE_GROUP} -z ${CLUSTER_NAME}.${BASE_DOMAIN} -n ${INFRA_ID}-network-link -v "${INFRA_ID}-vnet" -e false

6.11.12.1. ARM template for the VNet

You can use the following Azure Resource Manager (ARM) template to deploy the VNet that you need for your OpenShift Container Platform cluster:

Example 6.7. 01_vnet.json ARM template

{
  "$schema" : "https://schema.management.azure.com/schemas/2015-01-01/deploymentTemplate.json#",
  "contentVersion" : "1.0.0.0",
  "parameters" : {
    "baseName" : {
      "type" : "string",
      "minLength" : 1,
      "metadata" : {
        "description" : "Base name to be used in resource names (usually the cluster's Infra ID)"
      }
    }
  },
  "variables" : {
    "location" : "[resourceGroup().location]",
    "virtualNetworkName" : "[concat(parameters('baseName'), '-vnet')]",
    "addressPrefix" : "10.0.0.0/16",
    "masterSubnetName" : "[concat(parameters('baseName'), '-master-subnet')]",
    "masterSubnetPrefix" : "10.0.0.0/24",
    "nodeSubnetName" : "[concat(parameters('baseName'), '-worker-subnet')]",
    "nodeSubnetPrefix" : "10.0.1.0/24",
    "clusterNsgName" : "[concat(parameters('baseName'), '-nsg')]"
  },
  "resources" : [
    {
      "apiVersion" : "2018-12-01",
      "type" : "Microsoft.Network/virtualNetworks",
      "name" : "[variables('virtualNetworkName')]",
      "location" : "[variables('location')]",
      "dependsOn" : [
        "[concat('Microsoft.Network/networkSecurityGroups/', variables('clusterNsgName'))]"
      ],
      "properties" : {
        "addressSpace" : {
          "addressPrefixes" : [
            "[variables('addressPrefix')]"
          ]
        },
        "subnets" : [
          {
            "name" : "[variables('masterSubnetName')]",
            "properties" : {
              "addressPrefix" : "[variables('masterSubnetPrefix')]",
              "serviceEndpoints": [],
              "networkSecurityGroup" : {
                "id" : "[resourceId('Microsoft.Network/networkSecurityGroups', variables('clusterNsgName'))]"
              }
            }
          },
          {
            "name" : "[variables('nodeSubnetName')]",
            "properties" : {
              "addressPrefix" : "[variables('nodeSubnetPrefix')]",
              "serviceEndpoints": [],
              "networkSecurityGroup" : {
                "id" : "[resourceId('Microsoft.Network/networkSecurityGroups', variables('clusterNsgName'))]"
              }
            }
          }
        ]
      }
    },
    {
      "type" : "Microsoft.Network/networkSecurityGroups",
      "name" : "[variables('clusterNsgName')]",
      "apiVersion" : "2018-10-01",
      "location" : "[variables('location')]",
      "properties" : {
        "securityRules" : [
          {
            "name" : "apiserver_in",
            "properties" : {
              "protocol" : "Tcp",
              "sourcePortRange" : "*",
              "destinationPortRange" : "6443",
              "sourceAddressPrefix" : "*",
              "destinationAddressPrefix" : "*",
              "access" : "Allow",
              "priority" : 101,
              "direction" : "Inbound"
            }
          }
        ]
      }
    }
  ]
}

6.11.13. Deploying the RHCOS cluster image for the Azure infrastructure

You must use a valid Red Hat Enterprise Linux CoreOS (RHCOS) image for Microsoft Azure for your OpenShift Container Platform nodes.

Prerequisites

Configure an Azure account.
Generate the Ignition config files for your cluster.
Store the RHCOS virtual hard disk (VHD) cluster image in an Azure storage container.
Store the bootstrap Ignition config file in an Azure storage container.

Procedure

Copy the template from the ARM template for image storage section of this topic and save it as 02_storage.json in your cluster’s installation directory. This template describes the image storage that your cluster requires.

Export the RHCOS VHD blob URL as a variable:

$ export VHD_BLOB_URL=`az storage blob url --account-name ${CLUSTER_NAME}sa --account-key ${ACCOUNT_KEY} -c vhd -n "rhcos.vhd" -o tsv`

Deploy the cluster image:

$ az deployment group create -g ${RESOURCE_GROUP} \
  --template-file "<installation_directory>/02_storage.json" \
  --parameters vhdBlobURL="${VHD_BLOB_URL}" \ 1
  --parameters baseName="${INFRA_ID}"2

1: The blob URL of the RHCOS VHD to be used to create master and worker machines.
2: The base name to be used in resource names; this is usually the cluster’s infrastructure ID.

6.11.13.1. ARM template for image storage

You can use the following Azure Resource Manager (ARM) template to deploy the stored Red Hat Enterprise Linux CoreOS (RHCOS) image that you need for your OpenShift Container Platform cluster:

Example 6.8. 02_storage.json ARM template

{
  "$schema" : "https://schema.management.azure.com/schemas/2015-01-01/deploymentTemplate.json#",
  "contentVersion" : "1.0.0.0",
  "parameters" : {
    "baseName" : {
      "type" : "string",
      "minLength" : 1,
      "metadata" : {
        "description" : "Base name to be used in resource names (usually the cluster's Infra ID)"
      }
    },
    "vhdBlobURL" : {
      "type" : "string",
      "metadata" : {
        "description" : "URL pointing to the blob where the VHD to be used to create master and worker machines is located"
      }
    }
  },
  "variables" : {
    "location" : "[resourceGroup().location]",
    "imageName" : "[concat(parameters('baseName'), '-image')]",
    "imageNameGen2" : "[concat(parameters('baseName'), '-gen2')]"
  },
  "resources" : [
    {
      "apiVersion" : "2018-06-01",
      "type": "Microsoft.Compute/images",
      "name": "[variables('imageName')]",
      "location" : "[variables('location')]",
      "properties": {
        "storageProfile": {
          "osDisk": {
            "osType": "Linux",
            "osState": "Generalized",
            "blobUri": "[parameters('vhdBlobURL')]",
            "storageAccountType": "Standard_LRS"
          }
        }
      }
    },
    {
      "apiVersion": "2020-12-01",
      "type": "Microsoft.Compute/images",
      "name": "[variables('imageNameGen2')]",
      "location": "[variables('location')]",
      "properties": {
        "hyperVGeneration": "V2",
        "storageProfile": {
          "osDisk": {
            "osType": "Linux",
            "osState": "Generalized",
            "blobUri": "[parameters('vhdBlobURL')]",
            "storageAccountType": "Standard_LRS"
          }
        }
      }
    }
  ]
}

6.11.14. Networking requirements for user-provisioned infrastructure

All the Red Hat Enterprise Linux CoreOS (RHCOS) machines require networking to be configured in initramfs during boot to fetch their Ignition config files.

6.11.14.1. Network connectivity requirements

You must configure the network connectivity between machines to allow OpenShift Container Platform cluster components to communicate. Each machine must be able to resolve the hostnames of all other machines in the cluster.

This section provides details about the ports that are required.

Important

In connected OpenShift Container Platform environments, all nodes are required to have internet access to pull images for platform containers and provide telemetry data to Red Hat.

Table 6.38. Ports used for all-machine to all-machine communications
Protocol	Port	Description
ICMP	N/A	Network reachability tests
TCP	`1936`	Metrics
	`9000`-`9999`	Host level services, including the node exporter on ports `9100`-`9101` and the Cluster Version Operator on port `9099`.
	`10250`-`10259`	The default ports that Kubernetes reserves
	`10256`	openshift-sdn
UDP	`4789`	VXLAN
	`6081`	Geneve
	`9000`-`9999`	Host level services, including the node exporter on ports `9100`-`9101`.
	`500`	IPsec IKE packets
	`4500`	IPsec NAT-T packets
TCP/UDP	`30000`-`32767`	Kubernetes node port
ESP	N/A	IPsec Encapsulating Security Payload (ESP)

Table 6.39. Ports used for all-machine to control plane communications
Protocol	Port	Description
TCP	`6443`	Kubernetes API

Table 6.40. Ports used for control plane machine to control plane machine communications
Protocol	Port	Description
TCP	`2379`-`2380`	etcd server and peer ports

6.11.15. Creating networking and load balancing components in Azure

You must configure networking and load balancing in Microsoft Azure for your OpenShift Container Platform cluster to use. One way to create these components is to modify the provided Azure Resource Manager (ARM) template.

Note

Prerequisites

Configure an Azure account.
Generate the Ignition config files for your cluster.
Create and configure a VNet and associated subnets in Azure.

Procedure

Copy the template from the ARM template for the network and load balancers section of this topic and save it as 03_infra.json in your cluster’s installation directory. This template describes the networking and load balancing objects that your cluster requires.

Create the deployment by using the az CLI:

$ az deployment group create -g ${RESOURCE_GROUP} \
  --template-file "<installation_directory>/03_infra.json" \
  --parameters privateDNSZoneName="${CLUSTER_NAME}.${BASE_DOMAIN}" \ 1
  --parameters baseName="${INFRA_ID}"2

1: The name of the private DNS zone.
2: The base name to be used in resource names; this is usually the cluster’s infrastructure ID.

Create an api DNS record in the public zone for the API public load balancer. The ${BASE_DOMAIN_RESOURCE_GROUP} variable must point to the resource group where the public DNS zone exists.

Export the following variable:

$ export PUBLIC_IP=`az network public-ip list -g ${RESOURCE_GROUP} --query "[?name=='${INFRA_ID}-master-pip'] | [0].ipAddress" -o tsv`

Create the api DNS record in a new public zone:

$ az network dns record-set a add-record -g ${BASE_DOMAIN_RESOURCE_GROUP} -z ${CLUSTER_NAME}.${BASE_DOMAIN} -n api -a ${PUBLIC_IP} --ttl 60

If you are adding the cluster to an existing public zone, you can create the api DNS record in it instead:

$ az network dns record-set a add-record -g ${BASE_DOMAIN_RESOURCE_GROUP} -z ${BASE_DOMAIN} -n api.${CLUSTER_NAME} -a ${PUBLIC_IP} --ttl 60

6.11.15.1. ARM template for the network and load balancers

You can use the following Azure Resource Manager (ARM) template to deploy the networking objects and load balancers that you need for your OpenShift Container Platform cluster:

Example 6.9. 03_infra.json ARM template

{
  "$schema" : "https://schema.management.azure.com/schemas/2015-01-01/deploymentTemplate.json#",
  "contentVersion" : "1.0.0.0",
  "parameters" : {
    "baseName" : {
      "type" : "string",
      "minLength" : 1,
      "metadata" : {
        "description" : "Base name to be used in resource names (usually the cluster's Infra ID)"
      }
    },
    "vnetBaseName": {
      "type": "string",
      "defaultValue": "",
      "metadata" : {
        "description" : "The specific customer vnet's base name (optional)"
      }
    },
    "privateDNSZoneName" : {
      "type" : "string",
      "metadata" : {
        "description" : "Name of the private DNS zone"
      }
    }
  },
  "variables" : {
    "location" : "[resourceGroup().location]",
    "virtualNetworkName" : "[concat(if(not(empty(parameters('vnetBaseName'))), parameters('vnetBaseName'), parameters('baseName')), '-vnet')]",
    "virtualNetworkID" : "[resourceId('Microsoft.Network/virtualNetworks', variables('virtualNetworkName'))]",
    "masterSubnetName" : "[concat(if(not(empty(parameters('vnetBaseName'))), parameters('vnetBaseName'), parameters('baseName')), '-master-subnet')]",
    "masterSubnetRef" : "[concat(variables('virtualNetworkID'), '/subnets/', variables('masterSubnetName'))]",
    "masterPublicIpAddressName" : "[concat(parameters('baseName'), '-master-pip')]",
    "masterPublicIpAddressID" : "[resourceId('Microsoft.Network/publicIPAddresses', variables('masterPublicIpAddressName'))]",
    "masterLoadBalancerName" : "[concat(parameters('baseName'), '-public-lb')]",
    "masterLoadBalancerID" : "[resourceId('Microsoft.Network/loadBalancers', variables('masterLoadBalancerName'))]",
    "internalLoadBalancerName" : "[concat(parameters('baseName'), '-internal-lb')]",
    "internalLoadBalancerID" : "[resourceId('Microsoft.Network/loadBalancers', variables('internalLoadBalancerName'))]",
    "skuName": "Standard"
  },
  "resources" : [
    {
      "apiVersion" : "2018-12-01",
      "type" : "Microsoft.Network/publicIPAddresses",
      "name" : "[variables('masterPublicIpAddressName')]",
      "location" : "[variables('location')]",
      "sku": {
        "name": "[variables('skuName')]"
      },
      "properties" : {
        "publicIPAllocationMethod" : "Static",
        "dnsSettings" : {
          "domainNameLabel" : "[variables('masterPublicIpAddressName')]"
        }
      }
    },
    {
      "apiVersion" : "2018-12-01",
      "type" : "Microsoft.Network/loadBalancers",
      "name" : "[variables('masterLoadBalancerName')]",
      "location" : "[variables('location')]",
      "sku": {
        "name": "[variables('skuName')]"
      },
      "dependsOn" : [
        "[concat('Microsoft.Network/publicIPAddresses/', variables('masterPublicIpAddressName'))]"
      ],
      "properties" : {
        "frontendIPConfigurations" : [
          {
            "name" : "public-lb-ip",
            "properties" : {
              "publicIPAddress" : {
                "id" : "[variables('masterPublicIpAddressID')]"
              }
            }
          }
        ],
        "backendAddressPools" : [
          {
            "name" : "public-lb-backend"
          }
        ],
        "loadBalancingRules" : [
          {
            "name" : "api-internal",
            "properties" : {
              "frontendIPConfiguration" : {
                "id" :"[concat(variables('masterLoadBalancerID'), '/frontendIPConfigurations/public-lb-ip')]"
              },
              "backendAddressPool" : {
                "id" : "[concat(variables('masterLoadBalancerID'), '/backendAddressPools/public-lb-backend')]"
              },
              "protocol" : "Tcp",
              "loadDistribution" : "Default",
              "idleTimeoutInMinutes" : 30,
              "frontendPort" : 6443,
              "backendPort" : 6443,
              "probe" : {
                "id" : "[concat(variables('masterLoadBalancerID'), '/probes/api-internal-probe')]"
              }
            }
          }
        ],
        "probes" : [
          {
            "name" : "api-internal-probe",
            "properties" : {
              "protocol" : "Https",
              "port" : 6443,
              "requestPath": "/readyz",
              "intervalInSeconds" : 10,
              "numberOfProbes" : 3
            }
          }
        ]
      }
    },
    {
      "apiVersion" : "2018-12-01",
      "type" : "Microsoft.Network/loadBalancers",
      "name" : "[variables('internalLoadBalancerName')]",
      "location" : "[variables('location')]",
      "sku": {
        "name": "[variables('skuName')]"
      },
      "properties" : {
        "frontendIPConfigurations" : [
          {
            "name" : "internal-lb-ip",
            "properties" : {
              "privateIPAllocationMethod" : "Dynamic",
              "subnet" : {
                "id" : "[variables('masterSubnetRef')]"
              },
              "privateIPAddressVersion" : "IPv4"
            }
          }
        ],
        "backendAddressPools" : [
          {
            "name" : "internal-lb-backend"
          }
        ],
        "loadBalancingRules" : [
          {
            "name" : "api-internal",
            "properties" : {
              "frontendIPConfiguration" : {
                "id" : "[concat(variables('internalLoadBalancerID'), '/frontendIPConfigurations/internal-lb-ip')]"
              },
              "frontendPort" : 6443,
              "backendPort" : 6443,
              "enableFloatingIP" : false,
              "idleTimeoutInMinutes" : 30,
              "protocol" : "Tcp",
              "enableTcpReset" : false,
              "loadDistribution" : "Default",
              "backendAddressPool" : {
                "id" : "[concat(variables('internalLoadBalancerID'), '/backendAddressPools/internal-lb-backend')]"
              },
              "probe" : {
                "id" : "[concat(variables('internalLoadBalancerID'), '/probes/api-internal-probe')]"
              }
            }
          },
          {
            "name" : "sint",
            "properties" : {
              "frontendIPConfiguration" : {
                "id" : "[concat(variables('internalLoadBalancerID'), '/frontendIPConfigurations/internal-lb-ip')]"
              },
              "frontendPort" : 22623,
              "backendPort" : 22623,
              "enableFloatingIP" : false,
              "idleTimeoutInMinutes" : 30,
              "protocol" : "Tcp",
              "enableTcpReset" : false,
              "loadDistribution" : "Default",
              "backendAddressPool" : {
                "id" : "[concat(variables('internalLoadBalancerID'), '/backendAddressPools/internal-lb-backend')]"
              },
              "probe" : {
                "id" : "[concat(variables('internalLoadBalancerID'), '/probes/sint-probe')]"
              }
            }
          }
        ],
        "probes" : [
          {
            "name" : "api-internal-probe",
            "properties" : {
              "protocol" : "Https",
              "port" : 6443,
              "requestPath": "/readyz",
              "intervalInSeconds" : 10,
              "numberOfProbes" : 3
            }
          },
          {
            "name" : "sint-probe",
            "properties" : {
              "protocol" : "Https",
              "port" : 22623,
              "requestPath": "/healthz",
              "intervalInSeconds" : 10,
              "numberOfProbes" : 3
            }
          }
        ]
      }
    },
    {
      "apiVersion": "2018-09-01",
      "type": "Microsoft.Network/privateDnsZones/A",
      "name": "[concat(parameters('privateDNSZoneName'), '/api')]",
      "location" : "[variables('location')]",
      "dependsOn" : [
        "[concat('Microsoft.Network/loadBalancers/', variables('internalLoadBalancerName'))]"
      ],
      "properties": {
        "ttl": 60,
        "aRecords": [
          {
            "ipv4Address": "[reference(variables('internalLoadBalancerName')).frontendIPConfigurations[0].properties.privateIPAddress]"
          }
        ]
      }
    },
    {
      "apiVersion": "2018-09-01",
      "type": "Microsoft.Network/privateDnsZones/A",
      "name": "[concat(parameters('privateDNSZoneName'), '/api-int')]",
      "location" : "[variables('location')]",
      "dependsOn" : [
        "[concat('Microsoft.Network/loadBalancers/', variables('internalLoadBalancerName'))]"
      ],
      "properties": {
        "ttl": 60,
        "aRecords": [
          {
            "ipv4Address": "[reference(variables('internalLoadBalancerName')).frontendIPConfigurations[0].properties.privateIPAddress]"
          }
        ]
      }
    }
  ]
}

6.11.16. Creating the bootstrap machine in Azure

You must create the bootstrap machine in Microsoft Azure to use during OpenShift Container Platform cluster initialization. One way to create this machine is to modify the provided Azure Resource Manager (ARM) template.

Note

If you do not use the provided ARM template to create your bootstrap machine, you must review the provided information and manually create the infrastructure. If your cluster does not initialize correctly, you might have to contact Red Hat support with your installation logs.

Prerequisites

Configure an Azure account.
Generate the Ignition config files for your cluster.
Create and configure a VNet and associated subnets in Azure.
Create and configure networking and load balancers in Azure.
Create control plane and compute roles.

Procedure

Copy the template from the ARM template for the bootstrap machine section of this topic and save it as 04_bootstrap.json in your cluster’s installation directory. This template describes the bootstrap machine that your cluster requires.

Export the bootstrap URL variable:

$ bootstrap_url_expiry=`date -u -d "10 hours" '+%Y-%m-%dT%H:%MZ'`

$ export BOOTSTRAP_URL=`az storage blob generate-sas -c 'files' -n 'bootstrap.ign' --https-only --full-uri --permissions r --expiry $bootstrap_url_expiry --account-name ${CLUSTER_NAME}sa --account-key ${ACCOUNT_KEY} -o tsv`

Export the bootstrap ignition variable:

$ export BOOTSTRAP_IGNITION=`jq -rcnM --arg v "3.2.0" --arg url ${BOOTSTRAP_URL} '{ignition:{version:$v,config:{replace:{source:$url}}}}' | base64 | tr -d '\n'`

Create the deployment by using the az CLI:

$ az deployment group create -g ${RESOURCE_GROUP} \
  --template-file "<installation_directory>/04_bootstrap.json" \
  --parameters bootstrapIgnition="${BOOTSTRAP_IGNITION}" \ 1
  --parameters baseName="${INFRA_ID}" 2

1: The bootstrap Ignition content for the bootstrap cluster.
2: The base name to be used in resource names; this is usually the cluster’s infrastructure ID.

6.11.16.1. ARM template for the bootstrap machine

You can use the following Azure Resource Manager (ARM) template to deploy the bootstrap machine that you need for your OpenShift Container Platform cluster:

Example 6.10. 04_bootstrap.json ARM template

{
  "$schema" : "https://schema.management.azure.com/schemas/2015-01-01/deploymentTemplate.json#",
  "contentVersion" : "1.0.0.0",
  "parameters" : {
    "baseName" : {
      "type" : "string",
      "minLength" : 1,
      "metadata" : {
        "description" : "Base name to be used in resource names (usually the cluster's Infra ID)"
      }
    },
    "vnetBaseName": {
      "type": "string",
      "defaultValue": "",
      "metadata" : {
        "description" : "The specific customer vnet's base name (optional)"
      }
    },
    "bootstrapIgnition" : {
      "type" : "string",
      "minLength" : 1,
      "metadata" : {
        "description" : "Bootstrap ignition content for the bootstrap cluster"
      }
    },
    "sshKeyData" : {
      "type" : "securestring",
      "defaultValue" : "Unused",
      "metadata" : {
        "description" : "Unused"
      }
    },
    "bootstrapVMSize" : {
      "type" : "string",
      "defaultValue" : "Standard_D4s_v3",
      "metadata" : {
        "description" : "The size of the Bootstrap Virtual Machine"
      }
    }
  },
  "variables" : {
    "location" : "[resourceGroup().location]",
    "virtualNetworkName" : "[concat(if(not(empty(parameters('vnetBaseName'))), parameters('vnetBaseName'), parameters('baseName')), '-vnet')]",
    "virtualNetworkID" : "[resourceId('Microsoft.Network/virtualNetworks', variables('virtualNetworkName'))]",
    "masterSubnetName" : "[concat(if(not(empty(parameters('vnetBaseName'))), parameters('vnetBaseName'), parameters('baseName')), '-master-subnet')]",
    "masterSubnetRef" : "[concat(variables('virtualNetworkID'), '/subnets/', variables('masterSubnetName'))]",
    "masterLoadBalancerName" : "[concat(parameters('baseName'), '-public-lb')]",
    "internalLoadBalancerName" : "[concat(parameters('baseName'), '-internal-lb')]",
    "sshKeyPath" : "/home/core/.ssh/authorized_keys",
    "identityName" : "[concat(parameters('baseName'), '-identity')]",
    "vmName" : "[concat(parameters('baseName'), '-bootstrap')]",
    "nicName" : "[concat(variables('vmName'), '-nic')]",
    "imageName" : "[concat(parameters('baseName'), '-image')]",
    "clusterNsgName" : "[concat(if(not(empty(parameters('vnetBaseName'))), parameters('vnetBaseName'), parameters('baseName')), '-nsg')]",
    "sshPublicIpAddressName" : "[concat(variables('vmName'), '-ssh-pip')]"
  },
  "resources" : [
    {
      "apiVersion" : "2018-12-01",
      "type" : "Microsoft.Network/publicIPAddresses",
      "name" : "[variables('sshPublicIpAddressName')]",
      "location" : "[variables('location')]",
      "sku": {
        "name": "Standard"
      },
      "properties" : {
        "publicIPAllocationMethod" : "Static",
        "dnsSettings" : {
          "domainNameLabel" : "[variables('sshPublicIpAddressName')]"
        }
      }
    },
    {
      "apiVersion" : "2018-06-01",
      "type" : "Microsoft.Network/networkInterfaces",
      "name" : "[variables('nicName')]",
      "location" : "[variables('location')]",
      "dependsOn" : [
        "[resourceId('Microsoft.Network/publicIPAddresses', variables('sshPublicIpAddressName'))]"
      ],
      "properties" : {
        "ipConfigurations" : [
          {
            "name" : "pipConfig",
            "properties" : {
              "privateIPAllocationMethod" : "Dynamic",
              "publicIPAddress": {
                "id": "[resourceId('Microsoft.Network/publicIPAddresses', variables('sshPublicIpAddressName'))]"
              },
              "subnet" : {
                "id" : "[variables('masterSubnetRef')]"
              },
              "loadBalancerBackendAddressPools" : [
                {
                  "id" : "[concat('/subscriptions/', subscription().subscriptionId, '/resourceGroups/', resourceGroup().name, '/providers/Microsoft.Network/loadBalancers/', variables('masterLoadBalancerName'), '/backendAddressPools/public-lb-backend')]"
                },
                {
                  "id" : "[concat('/subscriptions/', subscription().subscriptionId, '/resourceGroups/', resourceGroup().name, '/providers/Microsoft.Network/loadBalancers/', variables('internalLoadBalancerName'), '/backendAddressPools/internal-lb-backend')]"
                }
              ]
            }
          }
        ]
      }
    },
    {
      "apiVersion" : "2018-06-01",
      "type" : "Microsoft.Compute/virtualMachines",
      "name" : "[variables('vmName')]",
      "location" : "[variables('location')]",
      "identity" : {
        "type" : "userAssigned",
        "userAssignedIdentities" : {
          "[resourceID('Microsoft.ManagedIdentity/userAssignedIdentities/', variables('identityName'))]" : {}
        }
      },
      "dependsOn" : [
        "[concat('Microsoft.Network/networkInterfaces/', variables('nicName'))]"
      ],
      "properties" : {
        "hardwareProfile" : {
          "vmSize" : "[parameters('bootstrapVMSize')]"
        },
        "osProfile" : {
          "computerName" : "[variables('vmName')]",
          "adminUsername" : "core",
          "adminPassword" : "NotActuallyApplied!",
          "customData" : "[parameters('bootstrapIgnition')]",
          "linuxConfiguration" : {
            "disablePasswordAuthentication" : false
          }
        },
        "storageProfile" : {
          "imageReference": {
            "id": "[resourceId('Microsoft.Compute/images', variables('imageName'))]"
          },
          "osDisk" : {
            "name": "[concat(variables('vmName'),'_OSDisk')]",
            "osType" : "Linux",
            "createOption" : "FromImage",
            "managedDisk": {
              "storageAccountType": "Premium_LRS"
            },
            "diskSizeGB" : 100
          }
        },
        "networkProfile" : {
          "networkInterfaces" : [
            {
              "id" : "[resourceId('Microsoft.Network/networkInterfaces', variables('nicName'))]"
            }
          ]
        }
      }
    },
    {
      "apiVersion" : "2018-06-01",
      "type": "Microsoft.Network/networkSecurityGroups/securityRules",
      "name" : "[concat(variables('clusterNsgName'), '/bootstrap_ssh_in')]",
      "location" : "[variables('location')]",
      "dependsOn" : [
        "[resourceId('Microsoft.Compute/virtualMachines', variables('vmName'))]"
      ],
      "properties": {
        "protocol" : "Tcp",
        "sourcePortRange" : "*",
        "destinationPortRange" : "22",
        "sourceAddressPrefix" : "*",
        "destinationAddressPrefix" : "*",
        "access" : "Allow",
        "priority" : 100,
        "direction" : "Inbound"
      }
    }
  ]
}

6.11.17. Creating the control plane machines in Azure

You must create the control plane machines in Microsoft Azure for your cluster to use. One way to create these machines is to modify the provided Azure Resource Manager (ARM) template.

Note

By default, Microsoft Azure places control plane machines and compute machines in a pre-set availability zone. You can manually set an availability zone for a compute node or control plane node. To do this, modify a vendor’s Azure Resource Manager (ARM) template by specifying each of your availability zones in the zones parameter of the virtual machine resource.

If you do not use the provided ARM template to create your control plane machines, you must review the provided information and manually create the infrastructure. If your cluster does not initialize correctly, consider contacting Red Hat support with your installation logs.

Prerequisites

Configure an Azure account.
Generate the Ignition config files for your cluster.
Create and configure a VNet and associated subnets in Azure.
Create and configure networking and load balancers in Azure.
Create control plane and compute roles.
Create the bootstrap machine.

Procedure

Copy the template from the ARM template for control plane machines section of this topic and save it as 05_masters.json in your cluster’s installation directory. This template describes the control plane machines that your cluster requires.

Export the following variable needed by the control plane machine deployment:

$ export MASTER_IGNITION=`cat <installation_directory>/master.ign | base64 | tr -d '\n'`

Create the deployment by using the az CLI:

$ az deployment group create -g ${RESOURCE_GROUP} \
  --template-file "<installation_directory>/05_masters.json" \
  --parameters masterIgnition="${MASTER_IGNITION}" \ 1
  --parameters baseName="${INFRA_ID}" 2

1: The Ignition content for the control plane nodes.
2: The base name to be used in resource names; this is usually the cluster’s infrastructure ID.

6.11.17.1. ARM template for control plane machines

You can use the following Azure Resource Manager (ARM) template to deploy the control plane machines that you need for your OpenShift Container Platform cluster:

Example 6.11. 05_masters.json ARM template

{
  "$schema" : "https://schema.management.azure.com/schemas/2015-01-01/deploymentTemplate.json#",
  "contentVersion" : "1.0.0.0",
  "parameters" : {
    "baseName" : {
      "type" : "string",
      "minLength" : 1,
      "metadata" : {
        "description" : "Base name to be used in resource names (usually the cluster's Infra ID)"
      }
    },
    "vnetBaseName": {
      "type": "string",
      "defaultValue": "",
      "metadata" : {
        "description" : "The specific customer vnet's base name (optional)"
      }
    },
    "masterIgnition" : {
      "type" : "string",
      "metadata" : {
        "description" : "Ignition content for the master nodes"
      }
    },
    "numberOfMasters" : {
      "type" : "int",
      "defaultValue" : 3,
      "minValue" : 2,
      "maxValue" : 30,
      "metadata" : {
        "description" : "Number of OpenShift masters to deploy"
      }
    },
    "sshKeyData" : {
      "type" : "securestring",
      "defaultValue" : "Unused",
      "metadata" : {
        "description" : "Unused"
      }
    },
    "privateDNSZoneName" : {
      "type" : "string",
      "defaultValue" : "",
      "metadata" : {
        "description" : "unused"
      }
    },
    "masterVMSize" : {
      "type" : "string",
      "defaultValue" : "Standard_D8s_v3",
      "metadata" : {
        "description" : "The size of the Master Virtual Machines"
      }
    },
    "diskSizeGB" : {
      "type" : "int",
      "defaultValue" : 1024,
      "metadata" : {
        "description" : "Size of the Master VM OS disk, in GB"
      }
    }
  },
  "variables" : {
    "location" : "[resourceGroup().location]",
    "virtualNetworkName" : "[concat(if(not(empty(parameters('vnetBaseName'))), parameters('vnetBaseName'), parameters('baseName')), '-vnet')]",
    "virtualNetworkID" : "[resourceId('Microsoft.Network/virtualNetworks', variables('virtualNetworkName'))]",
    "masterSubnetName" : "[concat(if(not(empty(parameters('vnetBaseName'))), parameters('vnetBaseName'), parameters('baseName')), '-master-subnet')]",
    "masterSubnetRef" : "[concat(variables('virtualNetworkID'), '/subnets/', variables('masterSubnetName'))]",
    "masterLoadBalancerName" : "[concat(parameters('baseName'), '-public-lb')]",
    "internalLoadBalancerName" : "[concat(parameters('baseName'), '-internal-lb')]",
    "sshKeyPath" : "/home/core/.ssh/authorized_keys",
    "identityName" : "[concat(parameters('baseName'), '-identity')]",
    "imageName" : "[concat(parameters('baseName'), '-image')]",
    "copy" : [
      {
        "name" : "vmNames",
        "count" :  "[parameters('numberOfMasters')]",
        "input" : "[concat(parameters('baseName'), '-master-', copyIndex('vmNames'))]"
      }
    ]
  },
  "resources" : [
    {
      "apiVersion" : "2018-06-01",
      "type" : "Microsoft.Network/networkInterfaces",
      "copy" : {
        "name" : "nicCopy",
        "count" : "[length(variables('vmNames'))]"
      },
      "name" : "[concat(variables('vmNames')[copyIndex()], '-nic')]",
      "location" : "[variables('location')]",
      "properties" : {
        "ipConfigurations" : [
          {
            "name" : "pipConfig",
            "properties" : {
              "privateIPAllocationMethod" : "Dynamic",
              "subnet" : {
                "id" : "[variables('masterSubnetRef')]"
              },
              "loadBalancerBackendAddressPools" : [
                {
                  "id" : "[concat('/subscriptions/', subscription().subscriptionId, '/resourceGroups/', resourceGroup().name, '/providers/Microsoft.Network/loadBalancers/', variables('masterLoadBalancerName'), '/backendAddressPools/public-lb-backend')]"
                },
                {
                  "id" : "[concat('/subscriptions/', subscription().subscriptionId, '/resourceGroups/', resourceGroup().name, '/providers/Microsoft.Network/loadBalancers/', variables('internalLoadBalancerName'), '/backendAddressPools/internal-lb-backend')]"
                }
              ]
            }
          }
        ]
      }
    },
    {
      "apiVersion" : "2018-06-01",
      "type" : "Microsoft.Compute/virtualMachines",
      "copy" : {
        "name" : "vmCopy",
        "count" : "[length(variables('vmNames'))]"
      },
      "name" : "[variables('vmNames')[copyIndex()]]",
      "location" : "[variables('location')]",
      "identity" : {
        "type" : "userAssigned",
        "userAssignedIdentities" : {
          "[resourceID('Microsoft.ManagedIdentity/userAssignedIdentities/', variables('identityName'))]" : {}
        }
      },
      "dependsOn" : [
        "[concat('Microsoft.Network/networkInterfaces/', concat(variables('vmNames')[copyIndex()], '-nic'))]"
      ],
      "properties" : {
        "hardwareProfile" : {
          "vmSize" : "[parameters('masterVMSize')]"
        },
        "osProfile" : {
          "computerName" : "[variables('vmNames')[copyIndex()]]",
          "adminUsername" : "core",
          "adminPassword" : "NotActuallyApplied!",
          "customData" : "[parameters('masterIgnition')]",
          "linuxConfiguration" : {
            "disablePasswordAuthentication" : false
          }
        },
        "storageProfile" : {
          "imageReference": {
            "id": "[resourceId('Microsoft.Compute/images', variables('imageName'))]"
          },
          "osDisk" : {
            "name": "[concat(variables('vmNames')[copyIndex()], '_OSDisk')]",
            "osType" : "Linux",
            "createOption" : "FromImage",
            "caching": "ReadOnly",
            "writeAcceleratorEnabled": false,
            "managedDisk": {
              "storageAccountType": "Premium_LRS"
            },
            "diskSizeGB" : "[parameters('diskSizeGB')]"
          }
        },
        "networkProfile" : {
          "networkInterfaces" : [
            {
              "id" : "[resourceId('Microsoft.Network/networkInterfaces', concat(variables('vmNames')[copyIndex()], '-nic'))]",
              "properties": {
                "primary": false
              }
            }
          ]
        }
      }
    }
  ]
}

6.11.18. Wait for bootstrap completion and remove bootstrap resources in Azure

After you create all of the required infrastructure in Microsoft Azure, wait for the bootstrap process to complete on the machines that you provisioned by using the Ignition config files that you generated with the installation program.

Prerequisites

Configure an Azure account.
Generate the Ignition config files for your cluster.
Create and configure a VNet and associated subnets in Azure.
Create and configure networking and load balancers in Azure.
Create control plane and compute roles.
Create the bootstrap machine.
Create the control plane machines.

Procedure

Change to the directory that contains the installation program and run the following command:
```
$ ./openshift-install wait-for bootstrap-complete --dir <installation_directory> \ 1
    --log-level info 2
```
1
For <installation_directory>, specify the path to the directory that you stored the installation files in.
2
To view different installation details, specify warn, debug, or error instead of info.
If the command exits without a FATAL warning, your production control plane has initialized.

Delete the bootstrap resources:

$ az network nsg rule delete -g ${RESOURCE_GROUP} --nsg-name ${INFRA_ID}-nsg --name bootstrap_ssh_in
$ az vm stop -g ${RESOURCE_GROUP} --name ${INFRA_ID}-bootstrap
$ az vm deallocate -g ${RESOURCE_GROUP} --name ${INFRA_ID}-bootstrap
$ az vm delete -g ${RESOURCE_GROUP} --name ${INFRA_ID}-bootstrap --yes
$ az disk delete -g ${RESOURCE_GROUP} --name ${INFRA_ID}-bootstrap_OSDisk --no-wait --yes
$ az network nic delete -g ${RESOURCE_GROUP} --name ${INFRA_ID}-bootstrap-nic --no-wait
$ az storage blob delete --account-key ${ACCOUNT_KEY} --account-name ${CLUSTER_NAME}sa --container-name files --name bootstrap.ign
$ az network public-ip delete -g ${RESOURCE_GROUP} --name ${INFRA_ID}-bootstrap-ssh-pip

Note

If you do not delete the bootstrap server, installation may not succeed due to API traffic being routed to the bootstrap server.

6.11.19. Creating additional worker machines in Azure

You can create worker machines in Microsoft Azure for your cluster to use by launching individual instances discretely or by automated processes outside the cluster, such as auto scaling groups. You can also take advantage of the built-in cluster scaling mechanisms and the machine API in OpenShift Container Platform.

In this example, you manually launch one instance by using the Azure Resource Manager (ARM) template. Additional instances can be launched by including additional resources of type 06_workers.json in the file.

Note

By default, Microsoft Azure places control plane machines and compute machines in a pre-set availability zone. You can manually set an availability zone for a compute node or control plane node. To do this, modify a vendor’s ARM template by specifying each of your availability zones in the zones parameter of the virtual machine resource.

Prerequisites

Configure an Azure account.
Generate the Ignition config files for your cluster.
Create and configure a VNet and associated subnets in Azure.
Create and configure networking and load balancers in Azure.
Create control plane and compute roles.
Create the bootstrap machine.
Create the control plane machines.

Procedure

Copy the template from the ARM template for worker machines section of this topic and save it as 06_workers.json in your cluster’s installation directory. This template describes the worker machines that your cluster requires.

Export the following variable needed by the worker machine deployment:

$ export WORKER_IGNITION=`cat <installation_directory>/worker.ign | base64 | tr -d '\n'`

Create the deployment by using the az CLI:

$ az deployment group create -g ${RESOURCE_GROUP} \
  --template-file "<installation_directory>/06_workers.json" \
  --parameters workerIgnition="${WORKER_IGNITION}" \ 1
  --parameters baseName="${INFRA_ID}" 2

1: The Ignition content for the worker nodes.
2: The base name to be used in resource names; this is usually the cluster’s infrastructure ID.

6.11.19.1. ARM template for worker machines

You can use the following Azure Resource Manager (ARM) template to deploy the worker machines that you need for your OpenShift Container Platform cluster:

Example 6.12. 06_workers.json ARM template

{
  "$schema" : "https://schema.management.azure.com/schemas/2015-01-01/deploymentTemplate.json#",
  "contentVersion" : "1.0.0.0",
  "parameters" : {
    "baseName" : {
      "type" : "string",
      "minLength" : 1,
      "metadata" : {
        "description" : "Base name to be used in resource names (usually the cluster's Infra ID)"
      }
    },
    "vnetBaseName": {
      "type": "string",
      "defaultValue": "",
      "metadata" : {
        "description" : "The specific customer vnet's base name (optional)"
      }
    },
    "workerIgnition" : {
      "type" : "string",
      "metadata" : {
        "description" : "Ignition content for the worker nodes"
      }
    },
    "numberOfNodes" : {
      "type" : "int",
      "defaultValue" : 3,
      "minValue" : 2,
      "maxValue" : 30,
      "metadata" : {
        "description" : "Number of OpenShift compute nodes to deploy"
      }
    },
    "sshKeyData" : {
      "type" : "securestring",
      "defaultValue" : "Unused",
      "metadata" : {
        "description" : "Unused"
      }
    },
    "nodeVMSize" : {
      "type" : "string",
      "defaultValue" : "Standard_D4s_v3",
      "metadata" : {
        "description" : "The size of the each Node Virtual Machine"
      }
    }
  },
  "variables" : {
    "location" : "[resourceGroup().location]",
    "virtualNetworkName" : "[concat(if(not(empty(parameters('vnetBaseName'))), parameters('vnetBaseName'), parameters('baseName')), '-vnet')]",
    "virtualNetworkID" : "[resourceId('Microsoft.Network/virtualNetworks', variables('virtualNetworkName'))]",
    "nodeSubnetName" : "[concat(if(not(empty(parameters('vnetBaseName'))), parameters('vnetBaseName'), parameters('baseName')), '-worker-subnet')]",
    "nodeSubnetRef" : "[concat(variables('virtualNetworkID'), '/subnets/', variables('nodeSubnetName'))]",
    "infraLoadBalancerName" : "[parameters('baseName')]",
    "sshKeyPath" : "/home/capi/.ssh/authorized_keys",
    "identityName" : "[concat(parameters('baseName'), '-identity')]",
    "imageName" : "[concat(parameters('baseName'), '-image')]",
    "copy" : [
      {
        "name" : "vmNames",
        "count" :  "[parameters('numberOfNodes')]",
        "input" : "[concat(parameters('baseName'), '-worker-', variables('location'), '-', copyIndex('vmNames', 1))]"
      }
    ]
  },
  "resources" : [
    {
      "apiVersion" : "2019-05-01",
      "name" : "[concat('node', copyIndex())]",
      "type" : "Microsoft.Resources/deployments",
      "copy" : {
        "name" : "nodeCopy",
        "count" : "[length(variables('vmNames'))]"
      },
      "properties" : {
        "mode" : "Incremental",
        "template" : {
          "$schema" : "http://schema.management.azure.com/schemas/2015-01-01/deploymentTemplate.json#",
          "contentVersion" : "1.0.0.0",
          "resources" : [
            {
              "apiVersion" : "2018-06-01",
              "type" : "Microsoft.Network/networkInterfaces",
              "name" : "[concat(variables('vmNames')[copyIndex()], '-nic')]",
              "location" : "[variables('location')]",
              "properties" : {
                "ipConfigurations" : [
                  {
                    "name" : "pipConfig",
                    "properties" : {
                      "privateIPAllocationMethod" : "Dynamic",
                      "subnet" : {
                        "id" : "[variables('nodeSubnetRef')]"
                      }
                    }
                  }
                ]
              }
            },
            {
              "apiVersion" : "2018-06-01",
              "type" : "Microsoft.Compute/virtualMachines",
              "name" : "[variables('vmNames')[copyIndex()]]",
              "location" : "[variables('location')]",
              "tags" : {
                "kubernetes.io-cluster-ffranzupi": "owned"
              },
              "identity" : {
                "type" : "userAssigned",
                "userAssignedIdentities" : {
                  "[resourceID('Microsoft.ManagedIdentity/userAssignedIdentities/', variables('identityName'))]" : {}
                }
              },
              "dependsOn" : [
                "[concat('Microsoft.Network/networkInterfaces/', concat(variables('vmNames')[copyIndex()], '-nic'))]"
              ],
              "properties" : {
                "hardwareProfile" : {
                  "vmSize" : "[parameters('nodeVMSize')]"
                },
                "osProfile" : {
                  "computerName" : "[variables('vmNames')[copyIndex()]]",
                  "adminUsername" : "capi",
                  "adminPassword" : "NotActuallyApplied!",
                  "customData" : "[parameters('workerIgnition')]",
                  "linuxConfiguration" : {
                    "disablePasswordAuthentication" : false
                  }
                },
                "storageProfile" : {
                  "imageReference": {
                    "id": "[resourceId('Microsoft.Compute/images', variables('imageName'))]"
                  },
                  "osDisk" : {
                    "name": "[concat(variables('vmNames')[copyIndex()],'_OSDisk')]",
                    "osType" : "Linux",
                    "createOption" : "FromImage",
                    "managedDisk": {
                      "storageAccountType": "Premium_LRS"
                    },
                    "diskSizeGB": 128
                  }
                },
                "networkProfile" : {
                  "networkInterfaces" : [
                    {
                      "id" : "[resourceId('Microsoft.Network/networkInterfaces', concat(variables('vmNames')[copyIndex()], '-nic'))]",
                      "properties": {
                        "primary": true
                      }
                    }
                  ]
                }
              }
            }
          ]
        }
      }
    }
  ]
}

6.11.20. Installing the OpenShift CLI by downloading the binary

You can install the OpenShift CLI (oc) to interact with OpenShift Container Platform from a command-line interface. You can install oc on Linux, Windows, or macOS.

Important

If you installed an earlier version of oc, you cannot use it to complete all of the commands in OpenShift Container Platform 4.11. Download and install the new version of oc.

Installing the OpenShift CLI on Linux

You can install the OpenShift CLI (oc) binary on Linux by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the architecture in the Product Variant drop-down menu.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 Linux Client entry and save the file.
Unpack the archive:
```
$ tar xvf <file>
```
Place the oc binary in a directory that is on your PATH.
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
$ oc <command>
```

Installing the OpenShift CLI on Windows

You can install the OpenShift CLI (oc) binary on Windows by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 Windows Client entry and save the file.
Unzip the archive with a ZIP program.
Move the oc binary to a directory that is on your PATH.
To check your PATH, open the command prompt and execute the following command:
```
C:\> path
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
C:\> oc <command>
```

Installing the OpenShift CLI on macOS

You can install the OpenShift CLI (oc) binary on macOS by using the following procedure.

Procedure

Navigate to the OpenShift Container Platform downloads page on the Red Hat Customer Portal.
Select the appropriate version in the Version drop-down menu.
Click Download Now next to the OpenShift v4.11 macOS Client entry and save the file.
Note
For macOS arm64, choose the OpenShift v4.11 macOS arm64 Client entry.
Unpack and unzip the archive.
Move the oc binary to a directory on your PATH.
To check your PATH, open a terminal and execute the following command:
```
$ echo $PATH
```

Verification

After you install the OpenShift CLI, it is available using the oc command:
```
$ oc <command>
```

6.11.21. Logging in to the cluster by using the CLI

Prerequisites

You deployed an OpenShift Container Platform cluster.
You installed the oc CLI.

Procedure

Export the kubeadmin credentials:
```
$ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1
```
1
For <installation_directory>, specify the path to the directory that you stored the installation files in.
Verify you can run oc commands successfully using the exported configuration:
```
$ oc whoami
```
Example output
```
system:admin
```

6.11.22. Approving the certificate signing requests for your machines

When you add machines to a cluster, two pending certificate signing requests (CSRs) are generated for each machine that you added. You must confirm that these CSRs are approved or, if necessary, approve them yourself. The client requests must be approved first, followed by the server requests.

Prerequisites

You added machines to your cluster.

Procedure

Confirm that the cluster recognizes the machines:
```
$ oc get nodes
```
Example output
```
NAME      STATUS    ROLES   AGE  VERSION
master-0  Ready     master  63m  v1.24.0
master-1  Ready     master  63m  v1.24.0
master-2  Ready     master  64m  v1.24.0
```
The output lists all of the machines that you created.
Note
The preceding output might not include the compute nodes, also known as worker nodes, until some CSRs are approved.

Review the pending CSRs and ensure that you see the client requests with the Pending or Approved status for each machine that you added to the cluster:

$ oc get csr

Example output

NAME        AGE     REQUESTOR                                                                   CONDITION
csr-8b2br   15m     system:serviceaccount:openshift-machine-config-operator:node-bootstrapper   Pending
csr-8vnps   15m     system:serviceaccount:openshift-machine-config-operator:node-bootstrapper   Pending
...

In this example, two machines are joining the cluster. You might see more approved CSRs in the list.

If the CSRs were not approved, after all of the pending CSRs for the machines you added are in Pending status, approve the CSRs for your cluster machines:
Note
Because the CSRs rotate automatically, approve your CSRs within an hour of adding the machines to the cluster. If you do not approve them within an hour, the certificates will rotate, and more than two certificates will be present for each node. You must approve all of these certificates. After the client CSR is approved, the Kubelet creates a secondary CSR for the serving certificate, which requires manual approval. Then, subsequent serving certificate renewal requests are automatically approved by the machine-approver if the Kubelet requests a new certificate with identical parameters.
Note
For clusters running on platforms that are not machine API enabled, such as bare metal and other user-provisioned infrastructure, you must implement a method of automatically approving the kubelet serving certificate requests (CSRs). If a request is not approved, then the oc exec, oc rsh, and oc logs commands cannot succeed, because a serving certificate is required when the API server connects to the kubelet. Any operation that contacts the Kubelet endpoint requires this certificate approval to be in place. The method must watch for new CSRs, confirm that the CSR was submitted by the node-bootstrapper service account in the system:node or system:admin groups, and confirm the identity of the node.
- To approve them individually, run the following command for each valid CSR:
```
$ oc adm certificate approve <csr_name> 1
```
  1
  <csr_name> is the name of a CSR from the list of current CSRs.
- To approve all pending CSRs, run the following command:
```
$ oc get csr -o go-template='{{range .items}}{{if not .status}}{{.metadata.name}}{{"\n"}}{{end}}{{end}}' | xargs --no-run-if-empty oc adm certificate approve
```
  Note
  Some Operators might not become available until some CSRs are approved.

Now that your client requests are approved, you must review the server requests for each machine that you added to the cluster:

$ oc get csr

Example output

NAME        AGE     REQUESTOR                                                                   CONDITION
csr-bfd72   5m26s   system:node:ip-10-0-50-126.us-east-2.compute.internal                       Pending
csr-c57lv   5m26s   system:node:ip-10-0-95-157.us-east-2.compute.internal                       Pending
...

If the remaining CSRs are not approved, and are in the Pending status, approve the CSRs for your cluster machines:
- To approve them individually, run the following command for each valid CSR:
```
$ oc adm certificate approve <csr_name> 1
```
  1
  <csr_name> is the name of a CSR from the list of current CSRs.
- To approve all pending CSRs, run the following command:
```
$ oc get csr -o go-template='{{range .items}}{{if not .status}}{{.metadata.name}}{{"\n"}}{{end}}{{end}}' | xargs oc adm certificate approve
```

After all client and server CSRs have been approved, the machines have the Ready status. Verify this by running the following command:

$ oc get nodes

Example output

NAME      STATUS    ROLES   AGE  VERSION
master-0  Ready     master  73m  v1.24.0
master-1  Ready     master  73m  v1.24.0
master-2  Ready     master  74m  v1.24.0
worker-0  Ready     worker  11m  v1.24.0
worker-1  Ready     worker  11m  v1.24.0

Note

It can take a few minutes after approval of the server CSRs for the machines to transition to the Ready status.

Additional information

For more information on CSRs, see Certificate Signing Requests.

6.11.23. Adding the Ingress DNS records

If you removed the DNS Zone configuration when creating Kubernetes manifests and generating Ignition configs, you must manually create DNS records that point at the Ingress load balancer. You can create either a wildcard *.apps.{baseDomain}. or specific records. You can use A, CNAME, and other records per your requirements.

Prerequisites

You deployed an OpenShift Container Platform cluster on Microsoft Azure by using infrastructure that you provisioned.
Install the OpenShift CLI (oc).
Install or update the Azure CLI.

Procedure

Confirm the Ingress router has created a load balancer and populated the EXTERNAL-IP field:

$ oc -n openshift-ingress get service router-default

Example output

NAME             TYPE           CLUSTER-IP      EXTERNAL-IP     PORT(S)                      AGE
router-default   LoadBalancer   172.30.20.10   35.130.120.110   80:32288/TCP,443:31215/TCP   20

Export the Ingress router IP as a variable:

$ export PUBLIC_IP_ROUTER=`oc -n openshift-ingress get service router-default --no-headers | awk '{print $4}'`

Add a *.apps record to the public DNS zone.

If you are adding this cluster to a new public zone, run:

$ az network dns record-set a add-record -g ${BASE_DOMAIN_RESOURCE_GROUP} -z ${CLUSTER_NAME}.${BASE_DOMAIN} -n *.apps -a ${PUBLIC_IP_ROUTER} --ttl 300

If you are adding this cluster to an already existing public zone, run:

$ az network dns record-set a add-record -g ${BASE_DOMAIN_RESOURCE_GROUP} -z ${BASE_DOMAIN} -n *.apps.${CLUSTER_NAME} -a ${PUBLIC_IP_ROUTER} --ttl 300

Add a *.apps record to the private DNS zone:

Create a *.apps record by using the following command:

$ az network private-dns record-set a create -g ${RESOURCE_GROUP} -z ${CLUSTER_NAME}.${BASE_DOMAIN} -n *.apps --ttl 300

Add the *.apps record to the private DNS zone by using the following command:

$ az network private-dns record-set a add-record -g ${RESOURCE_GROUP} -z ${CLUSTER_NAME}.${BASE_DOMAIN} -n *.apps -a ${PUBLIC_IP_ROUTER}

If you prefer to add explicit domains instead of using a wildcard, you can create entries for each of the cluster’s current routes:

$ oc get --all-namespaces -o jsonpath='{range .items[*]}{range .status.ingress[*]}{.host}{"\n"}{end}{end}' routes

Example output

oauth-openshift.apps.cluster.basedomain.com
console-openshift-console.apps.cluster.basedomain.com
downloads-openshift-console.apps.cluster.basedomain.com
alertmanager-main-openshift-monitoring.apps.cluster.basedomain.com
prometheus-k8s-openshift-monitoring.apps.cluster.basedomain.com

6.11.24. Completing an Azure installation on user-provisioned infrastructure

After you start the OpenShift Container Platform installation on Microsoft Azure user-provisioned infrastructure, you can monitor the cluster events until the cluster is ready.

Prerequisites

Deploy the bootstrap machine for an OpenShift Container Platform cluster on user-provisioned Azure infrastructure.
Install the oc CLI and log in.

Procedure

Complete the cluster installation:
```
$ ./openshift-install --dir <installation_directory> wait-for install-complete 1
```
Example output
```
INFO Waiting up to 30m0s for the cluster to initialize...
```
1
For <installation_directory>, specify the path to the directory that you stored the installation files in.
Important
- The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.
- It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.

6.11.25. Telemetry access for OpenShift Container Platform

Additional resources

See About remote health monitoring for more information about the Telemetry service

6.12. Uninstalling a cluster on Azure

You can remove a cluster that you deployed to Microsoft Azure.

6.12.1. Removing a cluster that uses installer-provisioned infrastructure

You can remove a cluster that uses installer-provisioned infrastructure from your cloud.

Note

After uninstallation, check your cloud provider for any resources not removed properly, especially with User Provisioned Infrastructure (UPI) clusters. There might be resources that the installer did not create or that the installer is unable to access.

Prerequisites

You have a copy of the installation program that you used to deploy the cluster.
You have the files that the installation program generated when you created your cluster.

While you can uninstall the cluster using the copy of the installation program that was used to deploy it, using OpenShift Container Platform version 4.13 or later is recommended.

The removal of service principals is dependent on the Microsoft Azure AD Graph API. Using version 4.13 or later of the installation program ensures that service principals are removed without the need for manual intervention, if and when Microsoft decides to retire the Azure AD Graph API.

Procedure

On the computer that you used to install the cluster, go to the directory that contains the installation program, and run the following command:
```
$ ./openshift-install destroy cluster \
--dir <installation_directory> --log-level info 1 2
```
1
For <installation_directory>, specify the path to the directory that you stored the installation files in.
2
To view different details, specify warn, debug, or error instead of info.
Note
You must specify the directory that contains the cluster definition files for your cluster. The installation program requires the metadata.json file in this directory to delete the cluster.
Optional: Delete the <installation_directory> directory and the OpenShift Container Platform installation program.