지원콘솔개발자평가판 시작연락처

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

Chapter 10. Using Red Hat subscriptions in builds

Use the following sections to run entitled builds on OpenShift Container Platform.

10.1. Creating an image stream tag for the Red Hat Universal Base Image

To use Red Hat subscriptions within a build, you create an image stream tag to reference the Universal Base Image (UBI).

To make the UBI available in every project in the cluster, you add the image stream tag to the openshift namespace. Otherwise, to make it available in a specific project, you add the image stream tag to that project.

The benefit of using image stream tags this way is that doing so grants access to the UBI based on the registry.redhat.io credentials in the install pull secret without exposing the pull secret to other users. This is more convenient than requiring each developer to install pull secrets with registry.redhat.io credentials in each project.

Procedure

  • To create an ImageStreamTag in the openshift namespace, so it is available to developers in all projects, enter: 

    $ oc tag --source=docker registry.redhat.io/ubi8/ubi:latest ubi:latest -n openshift
    Tip

    You can alternatively apply the following YAML to create an ImageStreamTag in the openshift namespace: 

    apiVersion: image.openshift.io/v1
kind: ImageStream
metadata:
  name: ubi
  namespace: openshift
spec:
  tags:
  - from:
      kind: DockerImage
      name: registry.redhat.io/ubi8/ubi:latest
    name: latest
    referencePolicy:
      type: Source

  • To create an ImageStreamTag in a single project, enter: 

    $ oc tag --source=docker registry.redhat.io/ubi8/ubi:latest ubi:latest
    Tip

    You can alternatively apply the following YAML to create an ImageStreamTag in a single project: 

    apiVersion: image.openshift.io/v1
kind: ImageStream
metadata:
  name: ubi
spec:
  tags:
  - from:
      kind: DockerImage
      name: registry.redhat.io/ubi8/ubi:latest
    name: latest
    referencePolicy:
      type: Source

10.2. Adding subscription entitlements as a build secret

Builds that use Red Hat subscriptions to install content must include the entitlement keys as a build secret.

Prerequisites

You must have access to Red Hat entitlements through your subscription. The entitlement secret is automatically created by the Insights Operator.

Tip

When you perform an Entitlement Build using Red Hat Enterprise Linux (RHEL) 7, you must have the following instructions in your Dockerfile before you run any yum commands: 

RUN rm /etc/rhsm-host

Procedure

  1. Add the etc-pki-entitlement secret as a build volume in the build configuration’s Docker strategy: 

    strategy:
  dockerStrategy:
    from:
      kind: ImageStreamTag
      name: ubi:latest
    volumes:
    - name: etc-pki-entitlement
      mounts:
      - destinationPath: /etc/pki/entitlement
      source:
        type: Secret
        secret:
          secretName: etc-pki-entitlement

10.3. Running builds with Subscription Manager

10.3.1. Docker builds using Subscription Manager

Docker strategy builds can use the Subscription Manager to install subscription content.

Prerequisites

The entitlement keys must be added as build strategy volumes.

Procedure

Use the following as an example Dockerfile to install content with the Subscription Manager: 

FROM registry.redhat.io/ubi8/ubi:latest
RUN dnf search kernel-devel --showduplicates && \
        dnf install -y kernel-devel

10.4. Running builds with Red Hat Satellite subscriptions

10.4.1. Adding Red Hat Satellite configurations to builds

Builds that use Red Hat Satellite to install content must provide appropriate configurations to obtain content from Satellite repositories.

Prerequisites

  • You must provide or create a yum-compatible repository configuration file that downloads content from your Satellite instance.

    Sample repository configuration

    [test-<name>]
name=test-<number>
baseurl = https://satellite.../content/dist/rhel/server/7/7Server/x86_64/os
enabled=1
gpgcheck=0
sslverify=0
sslclientkey = /etc/pki/entitlement/...-key.pem
sslclientcert = /etc/pki/entitlement/....pem

Procedure

  1. Create a ConfigMap containing the Satellite repository configuration file: 

    $ oc create configmap yum-repos-d --from-file /path/to/satellite.repo

  2. Add the Satellite repository configuration and entitlement key as a build volumes: 

    strategy:
  dockerStrategy:
    from:
      kind: ImageStreamTag
      name: ubi:latest
    volumes:
    - name: yum-repos-d
      mounts:
      - destinationPath: /etc/yum.repos.d
      source:
        type: ConfigMap
        configMap:
          name: yum-repos-d
    - name: etc-pki-entitlement
      mounts:
      - destinationPath: /etc/pki/entitlement
      source:
        type: Secret
        secret:
          secretName: etc-pki-entitlement

10.4.2. Docker builds using Red Hat Satellite subscriptions

Docker strategy builds can use Red Hat Satellite repositories to install subscription content.

Prerequisites

  • You have added the entitlement keys and Satellite repository configurations as build volumes.

Procedure

Use the following as an example Dockerfile to install content with Satellite: 

FROM registry.redhat.io/ubi8/ubi:latest
RUN dnf search kernel-devel --showduplicates && \
        dnf install -y kernel-devel

Additional resources

10.5. Running entitled builds using SharedSecret objects

You can configure and perform a build in one namespace that securely uses RHEL entitlements from a Secret object in another namespace.

You can still access RHEL entitlements from OpenShift Builds by creating a Secret object with your subscription credentials in the same namespace as your Build object. However, now, in OpenShift Container Platform 4.10 and later, you can access your credentials and certificates from a Secret object in one of the OpenShift Container Platform system namespaces. You run entitled builds with a CSI volume mount of a SharedSecret custom resource (CR) instance that references the Secret object.

This procedure relies on the newly introduced Shared Resources CSI Driver feature, which you can use to declare CSI Volume mounts in OpenShift Container Platform Builds. It also relies on the OpenShift Container Platform Insights Operator.

Important

The Shared Resources CSI Driver and The Build CSI Volumes are both Technology Preview features, which are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

The Shared Resources CSI Driver and the Build CSI Volumes features also belong to the TechPreviewNoUpgrade feature set, which is a subset of the current Technology Preview features. You can enable the TechPreviewNoUpgrade feature set on test clusters, where you can fully test them while leaving the features disabled on production clusters. Enabling this feature set cannot be undone and prevents minor version updates. This feature set is not recommended on production clusters. See "Enabling Technology Preview features using feature gates" in the following "Additional resources" section.

Prerequisites

  • You have enabled the TechPreviewNoUpgrade feature set by using the feature gates.
  • You have a SharedSecret custom resource (CR) instance that references the Secret object where the Insights Operator stores the subscription credentials.

  • You must have permission to perform the following actions:

    • Create build configs and start builds.
    • Discover which SharedSecret CR instances are available by entering the oc get sharedsecrets command and getting a non-empty list back.
    • Determine if the builder service account available to you in your namespace is allowed to use the given SharedSecret CR instance. In other words, you can run oc adm policy who-can use <identifier of specific SharedSecret> to see if the builder service account in your namespace is listed.
Note

If neither of the last two prerequisites in this list are met, establish, or ask someone to establish, the necessary role-based access control (RBAC) so that you can discover SharedSecret CR instances and enable service accounts to use SharedSecret CR instances.

Procedure

  1. Grant the builder service account RBAC permissions to use the SharedSecret CR instance by using oc apply with YAML content:

    Note

    Currently, kubectl and oc have hard-coded special case logic restricting the use verb to roles centered around pod security. Therefore, you cannot use oc create role …​ to create the role needed for consuming SharedSecret CR instances.

    Example oc apply -f command with YAML Role object definition

    $ oc apply -f - <<EOF
apiVersion: rbac.authorization.k8s.io/v1
kind: Role
metadata:
  name: shared-resource-my-share
  namespace: my-namespace
rules:
  - apiGroups:
      - sharedresource.openshift.io
    resources:
      - sharedsecrets
    resourceNames:
      - my-share
    verbs:
      - use
EOF

  2. Create the RoleBinding associated with the role by using the oc command:

    Example oc create rolebinding command

    $ oc create rolebinding shared-resource-my-share --role=shared-resource-my-share --serviceaccount=my-namespace:builder

  3. Create a BuildConfig object that accesses the RHEL entitlements.

    Example YAML BuildConfig object definition

    apiVersion: build.openshift.io/v1
kind: BuildConfig
metadata:
  name: my-csi-bc
  namespace: my-csi-app-namespace
spec:
  runPolicy: Serial
  source:
    dockerfile: |
      FROM registry.redhat.io/ubi8/ubi:latest
      RUN ls -la /etc/pki/entitlement
      RUN rm /etc/rhsm-host
      RUN yum repolist --disablerepo=*
      RUN subscription-manager repos --enable rhocp-4.9-for-rhel-8-x86_64-rpms
      RUN yum -y update
      RUN yum install -y openshift-clients.x86_64
  strategy:
    type: Docker
    dockerStrategy:
      volumes:
        - mounts:
            - destinationPath: "/etc/pki/entitlement"
          name: my-csi-shared-secret
          source:
            csi:
              driver: csi.sharedresource.openshift.io
              readOnly: true
              volumeAttributes:
                sharedSecret: my-share-bc
            type: CSI

  4. Start a build from the BuildConfig object and follow the logs with the oc command.

    Example oc start-build command

    $ oc start-build my-csi-bc -F

    Example 10.1. Example output from the oc start-build command

    Note

    Some sections of the following output have been replaced with …​ 

    build.build.openshift.io/my-csi-bc-1 started
Caching blobs under "/var/cache/blobs".

Pulling image registry.redhat.io/ubi8/ubi:latest ...
Trying to pull registry.redhat.io/ubi8/ubi:latest...
Getting image source signatures
Copying blob sha256:5dcbdc60ea6b60326f98e2b49d6ebcb7771df4b70c6297ddf2d7dede6692df6e
Copying blob sha256:8671113e1c57d3106acaef2383f9bbfe1c45a26eacb03ec82786a494e15956c3
Copying config sha256:b81e86a2cb9a001916dc4697d7ed4777a60f757f0b8dcc2c4d8df42f2f7edb3a
Writing manifest to image destination
Storing signatures
Adding transient rw bind mount for /run/secrets/rhsm
STEP 1/9: FROM registry.redhat.io/ubi8/ubi:latest
STEP 2/9: RUN ls -la /etc/pki/entitlement
total 360
drwxrwxrwt. 2 root root 	80 Feb  3 20:28 .
drwxr-xr-x. 10 root root	154 Jan 27 15:53 ..
-rw-r--r--. 1 root root   3243 Feb  3 20:28 entitlement-key.pem
-rw-r--r--. 1 root root 362540 Feb  3 20:28 entitlement.pem
time="2022-02-03T20:28:32Z" level=warning msg="Adding metacopy option, configured globally"
--> 1ef7c6d8c1a
STEP 3/9: RUN rm /etc/rhsm-host
time="2022-02-03T20:28:33Z" level=warning msg="Adding metacopy option, configured globally"
--> b1c61f88b39
STEP 4/9: RUN yum repolist --disablerepo=*
Updating Subscription Management repositories.


...

--> b067f1d63eb
STEP 5/9: RUN subscription-manager repos --enable rhocp-4.9-for-rhel-8-x86_64-rpms
Repository 'rhocp-4.9-for-rhel-8-x86_64-rpms' is enabled for this system.
time="2022-02-03T20:28:40Z" level=warning msg="Adding metacopy option, configured globally"
--> 03927607ebd
STEP 6/9: RUN yum -y update
Updating Subscription Management repositories.

...

Upgraded:
  systemd-239-51.el8_5.3.x86_64      	systemd-libs-239-51.el8_5.3.x86_64
  systemd-pam-239-51.el8_5.3.x86_64
Installed:
  diffutils-3.6-6.el8.x86_64           	libxkbcommon-0.9.1-1.el8.x86_64
  xkeyboard-config-2.28-1.el8.noarch

Complete!
time="2022-02-03T20:29:05Z" level=warning msg="Adding metacopy option, configured globally"
--> db57e92ff63
STEP 7/9: RUN yum install -y openshift-clients.x86_64
Updating Subscription Management repositories.

...

Installed:
  bash-completion-1:2.7-5.el8.noarch
  libpkgconf-1.4.2-1.el8.x86_64
  openshift-clients-4.9.0-202201211735.p0.g3f16530.assembly.stream.el8.x86_64
  pkgconf-1.4.2-1.el8.x86_64
  pkgconf-m4-1.4.2-1.el8.noarch
  pkgconf-pkg-config-1.4.2-1.el8.x86_64

Complete!
time="2022-02-03T20:29:19Z" level=warning msg="Adding metacopy option, configured globally"
--> 609507b059e
STEP 8/9: ENV "OPENSHIFT_BUILD_NAME"="my-csi-bc-1" "OPENSHIFT_BUILD_NAMESPACE"="my-csi-app-namespace"
--> cab2da3efc4
STEP 9/9: LABEL "io.openshift.build.name"="my-csi-bc-1" "io.openshift.build.namespace"="my-csi-app-namespace"
COMMIT temp.builder.openshift.io/my-csi-app-namespace/my-csi-bc-1:edfe12ca
--> 821b582320b
Successfully tagged temp.builder.openshift.io/my-csi-app-namespace/my-csi-bc-1:edfe12ca
821b582320b41f1d7bab4001395133f86fa9cc99cc0b2b64c5a53f2b6750db91
Build complete, no image push requested

10.6. Additional resources

Red Hat logoGithubRedditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

© 2024 Red Hat, Inc.