Chapter 22. Route [route.openshift.io/v1]

alternateBackends

array

alternateBackends allows up to 3 additional backends to be assigned to the route. Only the Service kind is allowed, and it will be defaulted to Service. Use the weight field in RouteTargetReference object to specify relative preference.

alternateBackends[]

object

RouteTargetReference specifies the target that resolve into endpoints. Only the 'Service' kind is allowed. Use 'weight' field to emphasize one over others.

host

string

host is an alias/DNS that points to the service. Optional. If not specified a route name will typically be automatically chosen. Must follow DNS952 subdomain conventions.

httpHeaders

object

RouteHTTPHeaders defines policy for HTTP headers.

path

string

path that the router watches for, to route traffic for to the service. Optional

port

object

RoutePort defines a port mapping from a router to an endpoint in the service endpoints.

subdomain

string

subdomain is a DNS subdomain that is requested within the ingress controller’s domain (as a subdomain). If host is set this field is ignored. An ingress controller may choose to ignore this suggested name, in which case the controller will report the assigned name in the status.ingress array or refuse to admit the route. If this value is set and the server does not support this field host will be populated automatically. Otherwise host is left empty. The field may have multiple parts separated by a dot, but not all ingress controllers may honor the request. This field may not be changed after creation except by a user with the update routes/custom-host permission.

Example: subdomain frontend automatically receives the router subdomain apps.mycluster.com to have a full hostname frontend.apps.mycluster.com.

tls

object

TLSConfig defines config used to secure a route and provide termination

to

object

RouteTargetReference specifies the target that resolve into endpoints. Only the 'Service' kind is allowed. Use 'weight' field to emphasize one over others.

wildcardPolicy

string

Wildcard policy if any for the route. Currently only 'Subdomain' or 'None' is allowed.

kind

string

The kind of target that the route is referring to. Currently, only 'Service' is allowed

name

string

name of the service/target that is being referred to. e.g. name of the service

weight

integer

weight as an integer between 0 and 256, default 100, that specifies the target’s relative weight against other target reference objects. 0 suppresses requests to this backend.

actions

object

RouteHTTPHeaderActions defines configuration for actions on HTTP request and response headers.

request

array

request is a list of HTTP request headers to modify. Currently, actions may define to either Set or Delete headers values. Actions defined here will modify the request headers of all requests made through a route. These actions are applied to a specific Route defined within a cluster i.e. connections made through a route. Currently, actions may define to either Set or Delete headers values. Route actions will be executed after IngressController actions for request headers. Actions are applied in sequence as defined in this list. A maximum of 20 request header actions may be configured. You can use this field to specify HTTP request headers that should be set or deleted when forwarding connections from the client to your application. Sample fetchers allowed are "req.hdr" and "ssl_c_der". Converters allowed are "lower" and "base64". Example header values: "%[req.hdr(X-target),lower]", "%{+Q}[ssl_c_der,base64]". Any request header configuration applied directly via a Route resource using this API will override header configuration for a header of the same name applied via spec.httpHeaders.actions on the IngressController or route annotation. Note: This field cannot be used if your route uses TLS passthrough.

request[]

object

RouteHTTPHeader specifies configuration for setting or deleting an HTTP header.

response

array

response is a list of HTTP response headers to modify. Currently, actions may define to either Set or Delete headers values. Actions defined here will modify the response headers of all requests made through a route. These actions are applied to a specific Route defined within a cluster i.e. connections made through a route. Route actions will be executed before IngressController actions for response headers. Actions are applied in sequence as defined in this list. A maximum of 20 response header actions may be configured. You can use this field to specify HTTP response headers that should be set or deleted when forwarding responses from your application to the client. Sample fetchers allowed are "res.hdr" and "ssl_c_der". Converters allowed are "lower" and "base64". Example header values: "%[res.hdr(X-target),lower]", "%{+Q}[ssl_c_der,base64]". Note: This field cannot be used if your route uses TLS passthrough.

response[]

object

RouteHTTPHeader specifies configuration for setting or deleting an HTTP header.

action

object

RouteHTTPHeaderActionUnion specifies an action to take on an HTTP header.

name

string

name specifies the name of a header on which to perform an action. Its value must be a valid HTTP header name as defined in RFC 2616 section 4.2. The name must consist only of alphanumeric and the following special characters, "-!#$%&'*+.^_`". The following header names are reserved and may not be modified via this API: Strict-Transport-Security, Proxy, Cookie, Set-Cookie. It must be no more than 255 characters in length. Header name must be unique.

set

object

RouteSetHTTPHeader specifies what value needs to be set on an HTTP header.

type

string

type defines the type of the action to be applied on the header. Possible values are Set or Delete. Set allows you to set HTTP request and response headers. Delete allows you to delete HTTP request and response headers.

value

string

value specifies a header value. Dynamic values can be added. The value will be interpreted as an HAProxy format string as defined in http://cbonte.github.io/haproxy-dconv/2.6/configuration.html#8.2.6 and may use HAProxy’s %[] syntax and otherwise must be a valid HTTP header value as defined in https://datatracker.ietf.org/doc/html/rfc7230#section-3.2. The value of this field must be no more than 16384 characters in length. Note that the total size of all net added headers after interpolating dynamic values must not exceed the value of spec.tuningOptions.headerBufferMaxRewriteBytes on the IngressController.

action

object

RouteHTTPHeaderActionUnion specifies an action to take on an HTTP header.

name

string

name specifies the name of a header on which to perform an action. Its value must be a valid HTTP header name as defined in RFC 2616 section 4.2. The name must consist only of alphanumeric and the following special characters, "-!#$%&'*+.^_`". The following header names are reserved and may not be modified via this API: Strict-Transport-Security, Proxy, Cookie, Set-Cookie. It must be no more than 255 characters in length. Header name must be unique.

set

object

RouteSetHTTPHeader specifies what value needs to be set on an HTTP header.

type

string

type defines the type of the action to be applied on the header. Possible values are Set or Delete. Set allows you to set HTTP request and response headers. Delete allows you to delete HTTP request and response headers.

value

string

value specifies a header value. Dynamic values can be added. The value will be interpreted as an HAProxy format string as defined in http://cbonte.github.io/haproxy-dconv/2.6/configuration.html#8.2.6 and may use HAProxy’s %[] syntax and otherwise must be a valid HTTP header value as defined in https://datatracker.ietf.org/doc/html/rfc7230#section-3.2. The value of this field must be no more than 16384 characters in length. Note that the total size of all net added headers after interpolating dynamic values must not exceed the value of spec.tuningOptions.headerBufferMaxRewriteBytes on the IngressController.

targetPort

IntOrString

The target port on pods selected by the service this route points to. If this is a string, it will be looked up as a named port in the target endpoints port list. Required

caCertificate

string

caCertificate provides the cert authority certificate contents

certificate

string

certificate provides certificate contents. This should be a single serving certificate, not a certificate chain. Do not include a CA certificate.

destinationCACertificate

string

destinationCACertificate provides the contents of the ca certificate of the final destination. When using reencrypt termination this file should be provided in order to have routers use it for health checks on the secure connection. If this field is not specified, the router may provide its own destination CA and perform hostname validation using the short service name (service.namespace.svc), which allows infrastructure generated certificates to automatically verify.

externalCertificate

object

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

insecureEdgeTerminationPolicy

string

insecureEdgeTerminationPolicy indicates the desired behavior for insecure connections to a route. While each router may make its own decisions on which ports to expose, this is normally port 80.

If a route does not specify insecureEdgeTerminationPolicy, then the default behavior is "None".

* Allow - traffic is sent to the server on the insecure port (edge/reencrypt terminations only).

* None - no traffic is allowed on the insecure port (default).

* Redirect - clients are redirected to the secure port.

key

string

key provides key file contents

termination

string

termination indicates termination type.

* edge - TLS termination is done by the router and http is used to communicate with the backend (default) * passthrough - Traffic is sent straight to the destination without the router providing TLS termination * reencrypt - TLS termination is done by the router and https is used to communicate with the backend

Note: passthrough termination is incompatible with httpHeader actions

name

string

name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

kind

string

The kind of target that the route is referring to. Currently, only 'Service' is allowed

name

string

name of the service/target that is being referred to. e.g. name of the service

weight

integer

weight as an integer between 0 and 256, default 100, that specifies the target’s relative weight against other target reference objects. 0 suppresses requests to this backend.

ingress

array

ingress describes the places where the route may be exposed. The list of ingress points may contain duplicate Host or RouterName values. Routes are considered live once they are Ready

ingress[]

object

RouteIngress holds information about the places where a route is exposed.

conditions

array

Conditions is the state of the route, may be empty.

conditions[]

object

RouteIngressCondition contains details for the current condition of this route on a particular router.

host

string

Host is the host string under which the route is exposed; this value is required

routerCanonicalHostname

string

CanonicalHostname is the external host name for the router that can be used as a CNAME for the host requested for this route. This value is optional and may not be set in all cases.

routerName

string

Name is a name chosen by the router to identify itself; this value is required

wildcardPolicy

string

Wildcard policy is the wildcard policy that was allowed where this route is exposed.

lastTransitionTime

Time

RFC 3339 date and time when this condition last transitioned

message

string

Human readable message indicating details about last transition.

reason

string

(brief) reason for the condition’s last transition, and is usually a machine and human readable constant

status

string

Status is the status of the condition. Can be True, False, Unknown.

type

string

Type is the type of the condition. Currently only Admitted or UnservableInFutureVersions.

200 - OK

RouteList schema

401 - Unauthorized

Empty

200 - OK

WatchEvent schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

200 - OK

Status schema

401 - Unauthorized

Empty

200 - OK

RouteList schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

Route schema

200 - OK

Route schema

201 - Created

Route schema

202 - Accepted

Route schema

401 - Unauthorized

Empty

200 - OK

WatchEvent schema

401 - Unauthorized

Empty

name

string

name of the Route

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

200 - OK

Status schema

202 - Accepted

Status schema

401 - Unauthorized

Empty

200 - OK

Route schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

200 - OK

Route schema

201 - Created

Route schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

Route schema

200 - OK

Route schema

201 - Created

Route schema

401 - Unauthorized

Empty

name

string

name of the Route

200 - OK

WatchEvent schema

401 - Unauthorized

Empty

name

string

name of the Route

200 - OK

Route schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

200 - OK

Route schema

201 - Created

Route schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

Route schema

200 - OK

Route schema

201 - Created

Route schema

401 - Unauthorized

Empty