SupportConsoleDevelopersStart a trialContact

Chapter 1. Validating an installation

You can check the status of an OpenShift Container Platform cluster after an installation by following the procedures in this document.

1.1. Reviewing the installation log

You can review a summary of an installation in the OpenShift Container Platform installation log. If an installation succeeds, the information required to access the cluster is included in the log.

Prerequisites

  • You have access to the installation host.

Procedure

  • Review the .openshift_install.log log file in the installation directory on your installation host: 

    $ cat <install_dir>/.openshift_install.log

    Example output

    Cluster credentials are included at the end of the log if the installation is successful, as outlined in the following example: 

    ...
time="2020-12-03T09:50:47Z" level=info msg="Install complete!"
time="2020-12-03T09:50:47Z" level=info msg="To access the cluster as the system:admin user when using 'oc', run 'export KUBECONFIG=/home/myuser/install_dir/auth/kubeconfig'"
time="2020-12-03T09:50:47Z" level=info msg="Access the OpenShift web-console here: https://console-openshift-console.apps.mycluster.example.com"
time="2020-12-03T09:50:47Z" level=info msg="Login to the console with user: \"kubeadmin\", and password: \"password\""
time="2020-12-03T09:50:47Z" level=debug msg="Time elapsed per stage:"
time="2020-12-03T09:50:47Z" level=debug msg="    Infrastructure: 6m45s"
time="2020-12-03T09:50:47Z" level=debug msg="Bootstrap Complete: 11m30s"
time="2020-12-03T09:50:47Z" level=debug msg=" Bootstrap Destroy: 1m5s"
time="2020-12-03T09:50:47Z" level=debug msg=" Cluster Operators: 17m31s"
time="2020-12-03T09:50:47Z" level=info msg="Time elapsed: 37m26s"

1.2. Viewing the image pull source

For clusters with unrestricted network connectivity, you can view the source of your pulled images by using a command on a node, such as crictl images.

However, for disconnected installations, to view the source of pulled images, you must review the CRI-O logs to locate the Trying to access log entry, as shown in the following procedure. Other methods to view the image pull source, such as the crictl images command, show the non-mirrored image name, even though the image is pulled from the mirrored location.

Prerequisites

  • You have access to the cluster as a user with the cluster-admin role.

Procedure

  • Review the CRI-O logs for a master or worker node: 

    $  oc adm node-logs <node_name> -u crio

    Example output

    The Trying to access log entry indicates where the image is being pulled from. 

    ...
Mar 17 02:52:50 ip-10-0-138-140.ec2.internal crio[1366]: time="2021-08-05 10:33:21.594930907Z" level=info msg="Pulling image: quay.io/openshift-release-dev/ocp-release:4.10.0-ppc64le" id=abcd713b-d0e1-4844-ac1c-474c5b60c07c name=/runtime.v1alpha2.ImageService/PullImage
Mar 17 02:52:50 ip-10-0-138-140.ec2.internal crio[1484]: time="2021-03-17 02:52:50.194341109Z" level=info msg="Trying to access \"li0317gcp1.mirror-registry.qe.gcp.devcluster.openshift.com:5000/ocp/release@sha256:1926eae7cacb9c00f142ec98b00628970e974284b6ddaf9a6a086cb9af7a6c31\""
Mar 17 02:52:50 ip-10-0-138-140.ec2.internal crio[1484]: time="2021-03-17 02:52:50.226788351Z" level=info msg="Trying to access \"li0317gcp1.mirror-registry.qe.gcp.devcluster.openshift.com:5000/ocp/release@sha256:1926eae7cacb9c00f142ec98b00628970e974284b6ddaf9a6a086cb9af7a6c31\""
...

    The log might show the image pull source twice, as shown in the preceding example.

    If your ImageContentSourcePolicy object lists multiple mirrors, OpenShift Container Platform attempts to pull the images in the order listed in the configuration, for example: 

    Trying to access \"li0317gcp1.mirror-registry.qe.gcp.devcluster.openshift.com:5000/ocp/release@sha256:1926eae7cacb9c00f142ec98b00628970e974284b6ddaf9a6a086cb9af7a6c31\"
Trying to access \"li0317gcp2.mirror-registry.qe.gcp.devcluster.openshift.com:5000/ocp/release@sha256:1926eae7cacb9c00f142ec98b00628970e974284b6ddaf9a6a086cb9af7a6c31\"

1.3. Getting cluster version, status, and update details

You can view the cluster version and status by running the oc get clusterversion command. If the status shows that the installation is still progressing, you can review the status of the Operators for more information.

You can also list the current update channel and review the available cluster updates.

Prerequisites

  • You have access to the cluster as a user with the cluster-admin role.
  • You have installed the OpenShift CLI (oc).

Procedure

  1. Obtain the cluster version and overall status: 

    $ oc get clusterversion

    Example output

    NAME      VERSION   AVAILABLE   PROGRESSING   SINCE   STATUS
version   4.6.4     True        False         6m25s   Cluster version is 4.6.4

    The example output indicates that the cluster has been installed successfully.

  2. If the cluster status indicates that the installation is still progressing, you can obtain more detailed progress information by checking the status of the Operators: 

    $ oc get clusteroperators.config.openshift.io

  3. View a detailed summary of cluster specifications, update availability, and update history: 

    $ oc describe clusterversion

  4. List the current update channel: 

    $ oc get clusterversion -o jsonpath='{.items[0].spec}{"\n"}'

    Example output

    {"channel":"stable-4.6","clusterID":"245539c1-72a3-41aa-9cec-72ed8cf25c5c"}

  5. Review the available cluster updates: 

    $ oc adm upgrade

    Example output

    Cluster version is 4.6.4

Updates:

VERSION IMAGE
4.6.6   quay.io/openshift-release-dev/ocp-release@sha256:c7e8f18e8116356701bd23ae3a23fb9892dd5ea66c8300662ef30563d7104f39

Additional resources

1.4. Verifying that a cluster uses short-term credentials

You can verify that a cluster uses short-term security credentials for individual components by checking the Cloud Credential Operator (CCO) configuration and other values in the cluster.

Prerequisites

  • You deployed an OpenShift Container Platform cluster using the Cloud Credential Operator utility (ccoctl) to implement short-term credentials.
  • You installed the OpenShift CLI (oc).
  • You are logged in as a user with cluster-admin privileges.

Procedure

  • Verify that the CCO is configured to operate in manual mode by running the following command: 

    $ oc get cloudcredentials cluster \
  -o=jsonpath={.spec.credentialsMode}

    The following output confirms that the CCO is operating in manual mode:

    Example output

    Manual

  • Verify that the cluster does not have root credentials by running the following command: 

    $ oc get secrets \
  -n kube-system <secret_name>

    where <secret_name> is the name of the root secret for your cloud provider.

    PlatformSecret name

    Amazon Web Services (AWS)

    aws-creds

    Microsoft Azure

    azure-credentials

    Google Cloud Platform (GCP)

    gcp-credentials

    An error confirms that the root secret is not present on the cluster.

    Example output for an AWS cluster

    Error from server (NotFound): secrets "aws-creds" not found

  • Verify that the components are using short-term security credentials for individual components by running the following command: 

    $ oc get authentication cluster \
  -o jsonpath \
  --template='{ .spec.serviceAccountIssuer }'

    This command displays the value of the .spec.serviceAccountIssuer parameter in the cluster Authentication object. An output of a URL that is associated with your cloud provider indicates that the cluster is using manual mode with short-term credentials that are created and managed from outside of the cluster.

  • Azure clusters: Verify that the components are assuming the Azure client ID that is specified in the secret manifests by running the following command: 

    $ oc get secrets \
  -n openshift-image-registry installer-cloud-credentials \
  -o jsonpath='{.data}'

    An output that contains the azure_client_id and azure_federated_token_file felids confirms that the components are assuming the Azure client ID.

  • Azure clusters: Verify that the pod identity webhook is running by running the following command: 

    $ oc get pods \
  -n openshift-cloud-credential-operator

    Example output

    NAME                                         READY   STATUS    RESTARTS   AGE
cloud-credential-operator-59cf744f78-r8pbq   2/2     Running   2          71m
pod-identity-webhook-548f977b4c-859lz        1/1     Running   1          70m

1.5. Querying the status of the cluster nodes by using the CLI

You can verify the status of the cluster nodes after an installation.

Prerequisites

  • You have access to the cluster as a user with the cluster-admin role.
  • You have installed the OpenShift CLI (oc).

Procedure

  1. List the status of the cluster nodes. Verify that the output lists all of the expected control plane and compute nodes and that each node has a Ready status: 

    $ oc get nodes

    Example output

    NAME                          STATUS   ROLES    AGE   VERSION
compute-1.example.com         Ready    worker   33m   v1.29.4
control-plane-1.example.com   Ready    master   41m   v1.29.4
control-plane-2.example.com   Ready    master   45m   v1.29.4
compute-2.example.com         Ready    worker   38m   v1.29.4
compute-3.example.com         Ready    worker   33m   v1.29.4
control-plane-3.example.com   Ready    master   41m   v1.29.4

  2. Review CPU and memory resource availability for each cluster node: 

    $ oc adm top nodes

    Example output

    NAME                          CPU(cores)   CPU%   MEMORY(bytes)   MEMORY%
compute-1.example.com         128m         8%     1132Mi          16%
control-plane-1.example.com   801m         22%    3471Mi          23%
control-plane-2.example.com   1718m        49%    6085Mi          40%
compute-2.example.com         935m         62%    5178Mi          75%
compute-3.example.com         111m         7%     1131Mi          16%
control-plane-3.example.com   942m         26%    4100Mi          27%

Additional resources

1.6. Reviewing the cluster status from the OpenShift Container Platform web console

You can review the following information in the Overview page in the OpenShift Container Platform web console:

  • The general status of your cluster
  • The status of the control plane, cluster Operators, and storage
  • CPU, memory, file system, network transfer, and pod availability
  • The API address of the cluster, the cluster ID, and the name of the provider
  • Cluster version information
  • Cluster update status, including details of the current update channel and available updates
  • A cluster inventory detailing node, pod, storage class, and persistent volume claim (PVC) information
  • A list of ongoing cluster activities and recent events

Prerequisites

  • You have access to the cluster as a user with the cluster-admin role.

Procedure

  • In the Administrator perspective, navigate to Home Overview.

1.7. Reviewing the cluster status from Red Hat OpenShift Cluster Manager

From the OpenShift Container Platform web console, you can review detailed information about the status of your cluster on OpenShift Cluster Manager.

Prerequisites

Procedure

  1. Go to the Cluster List list in OpenShift Cluster Manager and locate your OpenShift Container Platform cluster.
  2. Click the Overview tab for your cluster.

  3. Review the following information about your cluster:

    • vCPU and memory availability and resource usage
    • The cluster ID, status, type, region, and the provider name
    • Node counts by node type
    • Cluster version details, the creation date of the cluster, and the name of the cluster owner
    • The life cycle support status of the cluster

    • Subscription information, including the service level agreement (SLA) status, the subscription unit type, the production status of the cluster, the subscription obligation, and the service level

      Tip

      To view the history for your cluster, click the Cluster history tab.

  4. Navigate to the Monitoring page to review the following information:

    • A list of any issues that have been detected
    • A list of alerts that are firing
    • The cluster Operator status and version
    • The cluster’s resource usage

  5. Optional: You can view information about your cluster that Red Hat Insights collects by navigating to the Overview menu. From this menu you can view the following information:

    • Potential issues that your cluster might be exposed to, categorized by risk level
    • Health-check status by category

Additional resources

1.8. Checking cluster resource availability and utilization

OpenShift Container Platform provides a comprehensive set of monitoring dashboards that help you understand the state of cluster components.

In the Administrator perspective, you can access dashboards for core OpenShift Container Platform components, including:

  • etcd
  • Kubernetes compute resources
  • Kubernetes network resources
  • Prometheus
  • Dashboards relating to cluster and node performance

Figure 1.1. Example compute resources dashboard

monitoring dashboard compute resources

Prerequisites

  • You have access to the cluster as a user with the cluster-admin role.

Procedure

  1. In the Administrator perspective in the OpenShift Container Platform web console, navigate to Observe Dashboards.
  2. Choose a dashboard in the Dashboard list. Some dashboards, such as the etcd dashboard, produce additional sub-menus when selected.

  3. Optional: Select a time range for the graphs in the Time Range list.

    • Select a pre-defined time period.

    • Set a custom time range by selecting Custom time range in the Time Range list.

      1. Input or select the From and To dates and times.
      2. Click Save to save the custom time range.
  4. Optional: Select a Refresh Interval.
  5. Hover over each of the graphs within a dashboard to display detailed information about specific items.

Additional resources

  • See Monitoring overview for more information about the OpenShift Container Platform monitoring stack.

1.9. Listing alerts that are firing

Alerts provide notifications when a set of defined conditions are true in an OpenShift Container Platform cluster. You can review the alerts that are firing in your cluster by using the Alerting UI in the OpenShift Container Platform web console.

Prerequisites

  • You have access to the cluster as a user with the cluster-admin role.

Procedure

  1. In the Administrator perspective, navigate to the Observe Alerting Alerts page.
  2. Review the alerts that are firing, including their Severity, State, and Source.
  3. Select an alert to view more detailed information in the Alert Details page.

Additional resources

  • See Managing alerts for further details about alerting in OpenShift Container Platform.

1.10. Next steps

Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.