12.3. Installing a cluster on vSphere with network customizations

Procedure

1. If you do not have an SSH key that is configured for password-less authentication on your computer, create one. For example, on a computer that uses a Linux operating system, run the following command:

   $ ssh-keygen -t ed25519 -N '' \
       -f <path>/<file_name> 1

   1

   Specify the path and file name, such as ~/.ssh/id_rsa, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.

   Running this command generates an SSH key that does not require a password in the location that you specified.

   注意

   If you plan to install an OpenShift Container Platform cluster that uses FIPS Validated / Modules in Process cryptographic libraries on the x86_64 architecture, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.

2. Start the ssh-agent process as a background task:

   $ eval "$(ssh-agent -s)"

   Example output

   Agent pid 31874

3. Add your SSH private key to the ssh-agent:

   $ ssh-add <path>/<file_name> 1

   Example output

   Identity added: /home/<you>/<path>/<file_name> (<computer_name>)

   1

   Specify the path and file name for your SSH private key, such as ~/.ssh/id_rsa

4. Set the GOOGLE_APPLICATION_CREDENTIALS environment variable to the full path to your service account private key file.

   $ export GOOGLE_APPLICATION_CREDENTIALS="<your_service_account_file>"

5. Verify that the credentials were applied.

   $ gcloud auth list

Procedure

1. Access the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.

2. Navigate to the page for your installation type, download the installation program for your operating system, and place the file in the directory where you will store the installation configuration files.

   重要

   The installation program creates several files on the computer that you use to install your cluster. You must keep both the installation program and the files that the installation program creates after you finish installing the cluster.

   重要

   Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. You must complete the OpenShift Container Platform uninstallation procedures outlined for your specific cloud provider to remove your cluster entirely.

3. Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:

   $ tar xvf <installation_program>.tar.gz

4. From the Pull Secret page on the Red Hat OpenShift Cluster Manager site, download your installation pull secret as a .txt file. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

Procedure

1. From the vCenter home page, download the vCenter’s root CA certificates. Click Download trusted root CA certificates in the vSphere Web Services SDK section. The <vCenter>/certs/download.zip file downloads.

2. Extract the compressed file that contains the vCenter root CA certificates. The contents of the compressed file resemble the following file structure:

   certs
   ├── lin
   │   ├── 108f4d17.0
   │   ├── 108f4d17.r1
   │   ├── 7e757f6a.0
   │   ├── 8e4f8471.0
   │   └── 8e4f8471.r0
   ├── mac
   │   ├── 108f4d17.0
   │   ├── 108f4d17.r1
   │   ├── 7e757f6a.0
   │   ├── 8e4f8471.0
   │   └── 8e4f8471.r0
   └── win
       ├── 108f4d17.0.crt
       ├── 108f4d17.r1.crl
       ├── 7e757f6a.0.crt
       ├── 8e4f8471.0.crt
       └── 8e4f8471.r0.crl
   
   3 directories, 15 files

3. Add the files for your operating system to the system trust. For example, on a Fedora operating system, run the following command:

   # cp certs/lin/* /etc/pki/ca-trust/source/anchors

4. Update your system trust. For example, on a Fedora operating system, run the following command:

   # update-ca-trust extract

Procedure

1. Create the install-config.yaml file.

   1. Run the following command:

      $ ./openshift-install create install-config --dir=<installation_directory> 1

      1

      For <installation_directory>, specify the directory name to store the files that the installation program creates.

      重要

      Specify an empty directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.

   2. At the prompts, provide the configuration details for your cloud:

      1. Optional: Select an SSH key to use to access your cluster machines.

         注意

         For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

      2. Select gcp as the platform to target.
      3. If you have not configured the service account key for your GCP account on your computer, you must obtain it from GCP and paste the contents of the file or enter the absolute path to the file.
      4. Select the project ID to provision the cluster in. The default value is specified by the service account that you configured.
      5. Select the region to deploy the cluster to.
      6. Select the base domain to deploy the cluster to. The base domain corresponds to the public DNS zone that you created for your cluster.
      7. Select vsphere as the platform to target.
      8. Specify the name of your vCenter instance.

      9. Specify the user name and password for the vCenter account that has the required permissions to create the cluster.

         The installation program connects to your vCenter instance.

      10. Select the datacenter in your vCenter instance to connect to.
      11. Select the default vCenter datastore to use.
      12. Select the vCenter cluster to install the OpenShift Container Platform cluster in.
      13. Select the network in the vCenter instance that contains the virtual IP addresses and DNS records that you configured.
      14. Enter the virtual IP address that you configured for control plane API access.
      15. Enter the virtual IP address that you configured for cluster ingress.
      16. Enter the base domain. This base domain must be the same one that you used in the DNS records that you configured.
      17. Enter a descriptive name for your cluster. The cluster name must be the same one that you used in the DNS records that you configured.
      18. Paste the pull secret that you obtained from the Pull Secret page on the Red Hat OpenShift Cluster Manager site.
2. Modify the install-config.yaml file. You can find more information about the available parameters in the Installation configuration parameters section.

3. Back up the install-config.yaml file so that you can use it to install multiple clusters.

   重要

   The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

Procedure

1. Use the following command to create manifests:

   $ ./openshift-install create manifests --dir=<installation_directory> 1

   1

   For <installation_directory>, specify the name of the directory that contains the install-config.yaml file for your cluster.

2. Create a file that is named cluster-network-03-config.yml in the <installation_directory>/manifests/ directory:

   $ touch <installation_directory>/manifests/cluster-network-03-config.yml 1

   1

   For <installation_directory>, specify the directory name that contains the manifests/ directory for your cluster.

   After creating the file, several network configuration files are in the manifests/ directory, as shown:

   $ ls <installation_directory>/manifests/cluster-network-*

   Example output

   cluster-network-01-crd.yml
   cluster-network-02-config.yml
   cluster-network-03-config.yml

3. Open the cluster-network-03-config.yml file in an editor and enter a CR that describes the Operator configuration you want:

   apiVersion: operator.openshift.io/v1
   kind: Network
   metadata:
     name: cluster
   spec: 1
     clusterNetwork:
     - cidr: 10.128.0.0/14
       hostPrefix: 23
     serviceNetwork:
     - 172.30.0.0/16
     defaultNetwork:
       type: OpenShiftSDN
       openshiftSDNConfig:
         mode: NetworkPolicy
         mtu: 1450
         vxlanPort: 4789

   1

   The parameters for the spec parameter are only an example. Specify your configuration for the Cluster Network Operator in the CR.

   The CNO provides default values for the parameters in the CR, so you must specify only the parameters that you want to change.

4. Save the cluster-network-03-config.yml file and quit the text editor.
5. Optional: Back up the manifests/cluster-network-03-config.yml file. The installation program deletes the manifests/ directory when creating the cluster.

Procedure

1. Remove any existing GCP credentials that do not use the service account key for the GCP account that you configured for your cluster and that are stored in the following locations:

   • The GOOGLE_CREDENTIALS, GOOGLE_CLOUD_KEYFILE_JSON, or GCLOUD_KEYFILE_JSON environment variables
   • The ~/.gcp/osServiceAccount.json file
   • The gcloud cli default credentials

2. Run the installation program:

   $ ./openshift-install create cluster --dir=<installation_directory> \ 1
       --log-level=info 2

   1

   For <installation_directory>, specify the location of your customized ./install-config.yaml file.

   2

   To view different installation details, specify warn, debug, or error instead of info.

   注意

   If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

   When the cluster deployment completes, directions for accessing your cluster, including a link to its web console and credentials for the kubeadmin user, display in your terminal.

   重要

   The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.

   重要

   You must not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

3. Optional: You can reduce the number of permissions for the service account that you used to install the cluster.

   • If you assigned the Owner role to your service account, you can remove that role and replace it with the Viewer role.
   • If you included the Service Account Key Admin role, you can remove it.

Procedure

1. Export the kubeadmin credentials:

   $ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1

   1

   For <installation_directory>, specify the path to the directory that you stored the installation files in.

2. Verify you can run oc commands successfully using the exported configuration:

   $ oc whoami

   Example output

   system:admin

1. Stop the application that is using the persistent volume.
2. Clone the persistent volume.
3. Restart the application.
4. Create a backup of the cloned volume.
5. Delete the cloned volume.