11.5. Installing a cluster on RHV with customizations

Procedure

1. Check the RHV version.

   1. In the RHV Administration Portal, click the ? help icon in the upper-right corner and select About.
   2. In the window that opens, confirm that the RHV Software Version is 4.3.10 or higher.

2. Inspect the data center, cluster, and storage.

   1. In the RHV Administration Portal, click Compute Data Centers.
   2. Confirm the data center where you plan to install OpenShift Container Platform displays a green up arrow, meaning it is "Up".
   3. Click the name of that data center.
   4. In the data center details, on the Storage tab, confirm the storage domain where you plan to install OpenShift Container Platform is Active.
   5. Record the Domain Name for use later on.
   6. Confirm Free Space has at least 230 GiB.
   7. Confirm that the storage domain meets these etcd backend performance requirements, which can be measured using the fio performance benchmarking tool.
   8. In the data center details, click the Clusters tab.
   9. Find the RHV cluster where you plan to install OpenShift Container Platform. Record the cluster name for use later on.

3. Inspect the RHV host resources.

   1. In the RHV Administration Portal, click Compute > Clusters.
   2. Click the cluster where you plan to install OpenShift Container Platform.
   3. In the cluster details, click the Hosts tab.
   4. Inspect the hosts and confirm they have a combined total of at least 28 Logical CPU Cores available exclusively for the OpenShift Container Platform cluster.
   5. Record the number of available Logical CPU Cores for use later on.
   6. Confirm that these CPU cores are distributed so each of the seven virtual machines created during installation can have four cores.

   7. Confirm that, all together, the hosts have 112 GiB of Max free Memory for scheduling new VMs distributed to meet the requirements for each of the following OpenShift Container Platform machines:

      • 16 GiB required for the bootstrap machine
      • 16 GiB required for each of the three control plane machines
      • 16 GiB for each of the three compute machines
   8. Record the amount of Max free Memory for scheduling new VMs for use later on.

4. Verify that the virtual network for installing OpenShift Container Platform has access to the RHV Manager’s REST API. From a virtual machine on this network, use a curl command with the RHV Manager’s REST API. Use the following format:

   $ curl -k -u <username>@<profile>:<password> \ 1
   https://<engine-fqdn>/ovirt-engine/api 2

   1

   For <username>, specify the user name of an RHV administrator. For <profile>, specify the login profile, which you can get by going to the RHV Administration Portal login page and reviewing the Profile dropdown list. For <password>, specify the admin password.

   2

   For <engine-fqdn>, specify the fully qualified domain name of the RHV environment.

   For example:

   $ curl -k -u rhvadmin@internal:pw123 \
   https://rhv-env.virtlab.example.com/ovirt-engine/api

Procedure

1. Reserve three static IP addresses

   1. On the network where you plan to install OpenShift Container Platform, identify three static IP addresses that are outside the DHCP lease pool.

   2. Connect to a host on this network and verify that each of the IP addresses is not in use. For example, use Address Resolution Protocol (ARP) to check that none of the IP addresses have entries:

      $ arp 10.35.1.19

      Example output

      10.35.1.19 (10.35.1.19) -- no entry

   3. Reserve three static IP addresses following the standard practices for your network environment.
   4. Record these IP addresses for future reference.

2. Create DNS entries for the OpenShift Container Platform REST API and apps domain names using this format:

   api.<cluster-name>.<base-domain>   <ip-address> 1
   *.apps.<cluster-name>.<base-domain>   <ip-address> 2

   1

   For <cluster-name>, <base-domain>, and <ip-address>, specify the cluster name, base domain, and static IP address of your OpenShift Container Platform API.

   2

   Specify the cluster name, base domain, and static IP address of your OpenShift Container Platform apps for Ingress and the load balancer.

   For example:

   api.my-cluster.virtlab.example.com	10.35.1.19
   *.apps.my-cluster.virtlab.example.com	10.35.1.20

   注意

   The third static IP address does not require a DNS entry. The OpenShift Container Platform cluster uses that address for its internal DNS service.

Procedure

1. Use either of these two methods to download the CA certificate:

   • Go to the Manager’s webpage, https://<engine-fqdn>/ovirt-engine/. Then, under Downloads, click the CA Certificate link.

   • Run the following command:

     $ curl -k 'https://<engine-fqdn>/ovirt-engine/services/pki-resource?resource=ca-certificate&format=X509-PEM-CA' -o /tmp/ca.pem  1

     1

     For <engine-fqdn>, specify the fully qualified domain name of the RHV Manager, such as rhv-env.virtlab.example.com.

2. Configure the CA file to grant rootless user access to the Manager. Set the CA file permissions to have an octal value of 0644 (symbolic value: -rw-r—​r--):

   $ sudo chmod 0644 /tmp/ca.pem

3. For Linux, copy the CA certificate to the directory for server certificates. Use -p to preserve the permissions:

   $ sudo cp -p /tmp/ca.pem /etc/pki/ca-trust/source/anchors/ca.pem

4. Add the certificate to the certificate manager for your operating system:

   • For macOS, double-click the certificate file and use the Keychain Access utility to add the file to the System keychain.

   • For Linux, update the CA trust:

     $ sudo update-ca-trust

     注意

     If you use your own certificate authority, make sure the system trusts it.

Procedure

1. If you do not have an SSH key that is configured for password-less authentication on your computer, create one. For example, on a computer that uses a Linux operating system, run the following command:

   $ ssh-keygen -t ed25519 -N '' \
       -f <path>/<file_name> 1

   1

   Specify the path and file name, such as ~/.ssh/id_rsa, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.

   Running this command generates an SSH key that does not require a password in the location that you specified.

   注意

   If you plan to install an OpenShift Container Platform cluster that uses FIPS Validated / Modules in Process cryptographic libraries on the x86_64 architecture, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.

2. Start the ssh-agent process as a background task:

   $ eval "$(ssh-agent -s)"

   Example output

   Agent pid 31874

3. Add your SSH private key to the ssh-agent:

   $ ssh-add <path>/<file_name> 1

   Example output

   Identity added: /home/<you>/<path>/<file_name> (<computer_name>)

   1

   Specify the path and file name for your SSH private key, such as ~/.ssh/id_rsa

4. Set the GOOGLE_APPLICATION_CREDENTIALS environment variable to the full path to your service account private key file.

   $ export GOOGLE_APPLICATION_CREDENTIALS="<your_service_account_file>"

5. Verify that the credentials were applied.

   $ gcloud auth list

Procedure

1. Access the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.

2. Navigate to the page for your installation type, download the installation program for your operating system, and place the file in the directory where you will store the installation configuration files.

   重要

   The installation program creates several files on the computer that you use to install your cluster. You must keep both the installation program and the files that the installation program creates after you finish installing the cluster.

   重要

   Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. You must complete the OpenShift Container Platform uninstallation procedures outlined for your specific cloud provider to remove your cluster entirely.

3. Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:

   $ tar xvf <installation_program>.tar.gz

4. From the Pull Secret page on the Red Hat OpenShift Cluster Manager site, download your installation pull secret as a .txt file. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

Procedure

1. Create the install-config.yaml file.

   1. Run the following command:

      $ ./openshift-install create install-config --dir=<installation_directory> 1

      1

      For <installation_directory>, specify the directory name to store the files that the installation program creates.

      重要

      Specify an empty directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.

      1. Select gcp as the platform to target.
      2. If you have not configured the service account key for your GCP account on your computer, you must obtain it from GCP and paste the contents of the file or enter the absolute path to the file.
      3. Select the project ID to provision the cluster in. The default value is specified by the service account that you configured.
      4. Select the region to deploy the cluster to.
      5. Select the base domain to deploy the cluster to. The base domain corresponds to the public DNS zone that you created for your cluster.

   2. Respond to the installation program prompts.

      1. For SSH Public Key, select a password-less public key, such as ~/.ssh/id_rsa.pub. This key authenticates connections with the new OpenShift Container Platform cluster.

         注意

         For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, select an SSH key that your ssh-agent process uses.

      2. For Platform, select ovirt.

      3. For Enter oVirt’s API endpoint URL, enter the URL of the RHV API using this format:

         https://<engine-fqdn>/ovirt-engine/api 1

         1

         For <engine-fqdn>, specify the fully qualified domain name of the RHV environment.

         For example:

         $ curl -k -u ovirtadmin@internal:pw123 \
         https://rhv-env.virtlab.example.com/ovirt-engine/api

      4. For Is the oVirt CA trusted locally?, enter Yes since you have already set up a CA certificate. Otherwise, enter No.
      5. For oVirt’s CA bundle, if you entered Yes for the preceding question, copy the certificate content from /etc/pki/ca-trust/source/anchors/ca.pem and paste it here. Then, press Enter twice. Otherwise, if you entered No for the preceding question, this question does not appear.

      6. For oVirt engine username, enter the user name and profile of the RHV administrator using this format:

         <username>@<profile> 1

         1

         For <username>, specify the user name of an RHV administrator. For <profile>, specify the login profile, which you can get by going to the RHV Administration Portal login page and reviewing the Profile dropdown list. Together, the user name and profile should look similar to this example:

         admin@internal

      7. For oVirt engine password, enter the RHV admin password.
      8. For oVirt cluster, select the cluster for installing OpenShift Container Platform.
      9. For oVirt storage domain, select the storage domain for installing OpenShift Container Platform.
      10. For oVirt network, select a virtual network that has access to the RHV Manager REST API.
      11. For Internal API Virtual IP, enter the static IP address you set aside for the cluster’s REST API.
      12. For Internal DNS Virtual IP, enter the static IP address you set aside for the cluster’s internal DNS service.
      13. For Ingress virtual IP, enter the static IP address you reserved for the wildcard apps domain.
      14. For Base Domain, enter the base domain of the OpenShift Container Platform cluster. If this cluster is exposed to the outside world, this must be a valid domain recognized by DNS infrastructure. For example, enter: virtlab.example.com
      15. For Cluster Name, enter the name of the cluster. For example, my-cluster. Use cluster name from the externally registered/resolvable DNS entries you created for the OpenShift Container Platform REST API and apps domain names. The installation program also gives this name to the cluster in the RHV environment.
      16. For Pull Secret, copy the pull secret from the pull-secret.txt file you downloaded earlier and paste it here. You can also get a copy of the same pull secret from the Pull Secret page on the Red Hat OpenShift Cluster Manager site.
2. Modify the install-config.yaml file. You can find more information about the available parameters in the Installation configuration parameters section.

3. Back up the install-config.yaml file so that you can use it to install multiple clusters.

   重要

   The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

Procedure

1. Remove any existing GCP credentials that do not use the service account key for the GCP account that you configured for your cluster and that are stored in the following locations:

   • The GOOGLE_CREDENTIALS, GOOGLE_CLOUD_KEYFILE_JSON, or GCLOUD_KEYFILE_JSON environment variables
   • The ~/.gcp/osServiceAccount.json file
   • The gcloud cli default credentials

2. Run the installation program:

   $ ./openshift-install create cluster --dir=<installation_directory> \ 1
       --log-level=info 2

   1

   For <installation_directory>, specify the location of your customized ./install-config.yaml file.

   2

   To view different installation details, specify warn, debug, or error instead of info.

   注意

   If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

   When the cluster deployment completes, directions for accessing your cluster, including a link to its web console and credentials for the kubeadmin user, display in your terminal.

   重要

   The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.

   重要

   You must not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

3. Optional: You can reduce the number of permissions for the service account that you used to install the cluster.

   • If you assigned the Owner role to your service account, you can remove that role and replace it with the Viewer role.
   • If you included the Service Account Key Admin role, you can remove it.

Procedure

1. Export the kubeadmin credentials:

   $ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1

   1

   For <installation_directory>, specify the path to the directory that you stored the installation files in.

2. Verify you can run oc commands successfully using the exported configuration:

   $ oc whoami

   Example output

   system:admin

Procedure

1. In the cluster environment, export the administrator’s kubeconfig file:

   $ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1

   1

   For <installation_directory>, specify the path to the directory that you stored the installation files in.

   The kubeconfig file contains information about the cluster that is used by the CLI to connect a client to the correct cluster and API server.

2. View the control plane and compute machines created after a deployment:

   $ oc get nodes

3. View your cluster’s version:

   $ oc get clusterversion

4. View your Operators' status:

   $ oc get clusteroperator

5. View all running pods in the cluster:

   $ oc get pods -A

Procedure

1. Optional: In the Red Hat Virtualization (RHV) Administration Portal, open Compute Cluster.
2. Verify that the installation program creates the virtual machines.
3. Return to the command line where the installation program is running. When the installation program finishes, it displays the user name and temporary password for logging into the OpenShift Container Platform web console.

4. In a browser, open the URL of the OpenShift Container Platform web console. The URL uses this format:

   console-openshift-console.apps.<clustername>.<basedomain> 1

   1

   For <clustername>.<basedomain>, specify the cluster name and base domain.

   For example:

   console-openshift-console.apps.my-cluster.virtlab.example.com