14.5. 安装程序置备的安装后配置

流程

1. 配置 HAProxy Ingress Controller，以便您可以在端口 6443、443 和 80 上从负载均衡器访问集群：

   HAProxy 配置示例

   #...
   listen my-cluster-api-6443
       bind 192.168.1.100:6443
       mode tcp
       balance roundrobin
     option httpchk
     http-check connect
     http-check send meth GET uri /readyz
     http-check expect status 200
       server my-cluster-master-2 192.168.1.101:6443 check inter 10s rise 2 fall 2
       server my-cluster-master-0 192.168.1.102:6443 check inter 10s rise 2 fall 2
       server my-cluster-master-1 192.168.1.103:6443 check inter 10s rise 2 fall 2
   
   listen my-cluster-machine-config-api-22623
       bind 192.168.1.100:22623
       mode tcp
       balance roundrobin
     option httpchk
     http-check connect
     http-check send meth GET uri /healthz
     http-check expect status 200
       server my-cluster-master-2 192.168.1.101:22623 check inter 10s rise 2 fall 2
       server my-cluster-master-0 192.168.1.102:22623 check inter 10s rise 2 fall 2
       server my-cluster-master-1 192.168.1.103:22623 check inter 10s rise 2 fall 2
   
   listen my-cluster-apps-443
           bind 192.168.1.100:443
           mode tcp
           balance roundrobin
       option httpchk
       http-check connect
       http-check send meth GET uri /healthz/ready
       http-check expect status 200
           server my-cluster-worker-0 192.168.1.111:443 check port 1936 inter 10s rise 2 fall 2
           server my-cluster-worker-1 192.168.1.112:443 check port 1936 inter 10s rise 2 fall 2
           server my-cluster-worker-2 192.168.1.113:443 check port 1936 inter 10s rise 2 fall 2
   
   listen my-cluster-apps-80
           bind 192.168.1.100:80
           mode tcp
           balance roundrobin
       option httpchk
       http-check connect
       http-check send meth GET uri /healthz/ready
       http-check expect status 200
           server my-cluster-worker-0 192.168.1.111:80 check port 1936 inter 10s rise 2 fall 2
           server my-cluster-worker-1 192.168.1.112:80 check port 1936 inter 10s rise 2 fall 2
           server my-cluster-worker-2 192.168.1.113:80 check port 1936 inter 10s rise 2 fall 2
   # ...

2. 使用 curl CLI 命令验证外部负载均衡器及其资源是否正常运行：

   1. 运行以下命令并查看响应，验证集群机器配置 API 是否可以被 Kubernetes API 服务器资源访问：

      $ curl https://<loadbalancer_ip_address>:6443/version --insecure

      如果配置正确，您会收到 JSON 对象的响应：

      {
        "major": "1",
        "minor": "11+",
        "gitVersion": "v1.11.0+ad103ed",
        "gitCommit": "ad103ed",
        "gitTreeState": "clean",
        "buildDate": "2019-01-09T06:44:10Z",
        "goVersion": "go1.10.3",
        "compiler": "gc",
        "platform": "linux/amd64"
      }

   2. 运行以下命令并观察输出，验证集群机器配置 API 是否可以被 Machine 配置服务器资源访问：

      $ curl -v https://<loadbalancer_ip_address>:22623/healthz --insecure

      如果配置正确，命令的输出会显示以下响应：

      HTTP/1.1 200 OK
      Content-Length: 0

   3. 运行以下命令并观察输出，验证控制器是否可以被端口 80 上的 Ingress Controller 资源访问：

      $ curl -I -L -H "Host: console-openshift-console.apps.<cluster_name>.<base_domain>" http://<load_balancer_front_end_IP_address>

      如果配置正确，命令的输出会显示以下响应：

      HTTP/1.1 302 Found
      content-length: 0
      location: https://console-openshift-console.apps.ocp4.private.opequon.net/
      cache-control: no-cache

   4. 运行以下命令并观察输出，验证控制器是否可以被端口 443 上的 Ingress Controller 资源访问：

      $ curl -I -L --insecure --resolve console-openshift-console.apps.<cluster_name>.<base_domain>:443:<Load Balancer Front End IP Address> https://console-openshift-console.apps.<cluster_name>.<base_domain>

      如果配置正确，命令的输出会显示以下响应：

      HTTP/1.1 200 OK
      referrer-policy: strict-origin-when-cross-origin
      set-cookie: csrf-token=UlYWOyQ62LWjw2h003xtYSKlh1a0Py2hhctw0WmV2YEdhJjFyQwWcGBsja261dGLgaYO0nxzVErhiXt6QepA7g==; Path=/; Secure; SameSite=Lax
      x-content-type-options: nosniff
      x-dns-prefetch-control: off
      x-frame-options: DENY
      x-xss-protection: 1; mode=block
      date: Wed, 04 Oct 2023 16:29:38 GMT
      content-type: text/html; charset=utf-8
      set-cookie: 1e2670d92730b515ce3a1bb65da45062=1bf5e9573c9a2760c964ed1659cc1673; path=/; HttpOnly; Secure; SameSite=None
      cache-control: private

3. 为您的集群配置 DNS 记录，以外部负载均衡器的前端 IP 地址为目标。您必须在负载均衡器上将记录更新为集群 API 和应用程序的 DNS 服务器。

   修改 DNS 记录示例

   <load_balancer_ip_address>  A  api.<cluster_name>.<base_domain>
   A record pointing to Load Balancer Front End

   <load_balancer_ip_address>   A apps.<cluster_name>.<base_domain>
   A record pointing to Load Balancer Front End

   重要

   DNS 传播可能需要一些时间才能获得每个 DNS 记录。在验证每个记录前，请确保每个 DNS 记录传播。

4. 使用 curl CLI 命令验证外部负载均衡器和 DNS 记录配置是否正常运行：

   1. 运行以下命令并查看输出，验证您可以访问集群 API：

      $ curl https://api.<cluster_name>.<base_domain>:6443/version --insecure

      如果配置正确，您会收到 JSON 对象的响应：

      {
        "major": "1",
        "minor": "11+",
        "gitVersion": "v1.11.0+ad103ed",
        "gitCommit": "ad103ed",
        "gitTreeState": "clean",
        "buildDate": "2019-01-09T06:44:10Z",
        "goVersion": "go1.10.3",
        "compiler": "gc",
        "platform": "linux/amd64"
        }

   2. 运行以下命令并查看输出，验证您可以访问集群机器配置：

      $ curl -v https://api.<cluster_name>.<base_domain>:22623/healthz --insecure

      如果配置正确，命令的输出会显示以下响应：

      HTTP/1.1 200 OK
      Content-Length: 0

   3. 运行以下命令并查看输出，验证您可以在端口上访问每个集群应用程序：

      $ curl http://console-openshift-console.apps.<cluster_name>.<base_domain> -I -L --insecure

      如果配置正确，命令的输出会显示以下响应：

      HTTP/1.1 302 Found
      content-length: 0
      location: https://console-openshift-console.apps.<cluster-name>.<base domain>/
      cache-control: no-cacheHTTP/1.1 200 OK
      referrer-policy: strict-origin-when-cross-origin
      set-cookie: csrf-token=39HoZgztDnzjJkq/JuLJMeoKNXlfiVv2YgZc09c3TBOBU4NI6kDXaJH1LdicNhN1UsQWzon4Dor9GWGfopaTEQ==; Path=/; Secure
      x-content-type-options: nosniff
      x-dns-prefetch-control: off
      x-frame-options: DENY
      x-xss-protection: 1; mode=block
      date: Tue, 17 Nov 2020 08:42:10 GMT
      content-type: text/html; charset=utf-8
      set-cookie: 1e2670d92730b515ce3a1bb65da45062=9b714eb87e93cf34853e87a92d6894be; path=/; HttpOnly; Secure; SameSite=None
      cache-control: private

   4. 运行以下命令并查看输出，验证您可以在端口 443 上访问每个集群应用程序：

      $ curl https://console-openshift-console.apps.<cluster_name>.<base_domain> -I -L --insecure

      如果配置正确，命令的输出会显示以下响应：

      HTTP/1.1 200 OK
      referrer-policy: strict-origin-when-cross-origin
      set-cookie: csrf-token=UlYWOyQ62LWjw2h003xtYSKlh1a0Py2hhctw0WmV2YEdhJjFyQwWcGBsja261dGLgaYO0nxzVErhiXt6QepA7g==; Path=/; Secure; SameSite=Lax
      x-content-type-options: nosniff
      x-dns-prefetch-control: off
      x-frame-options: DENY
      x-xss-protection: 1; mode=block
      date: Wed, 04 Oct 2023 16:29:38 GMT
      content-type: text/html; charset=utf-8
      set-cookie: 1e2670d92730b515ce3a1bb65da45062=1bf5e9573c9a2760c964ed1659cc1673; path=/; HttpOnly; Secure; SameSite=None
      cache-control: private