75.4. 签名的数据

请注意，一个 crypto-cms:sign 端点通常在一个路由中定义，且免费的 crypto-cms:verify 在另一个路由后出现。

以下示例演示了如何创建 Signed Data 消息，以及如何验证 Signed Data 消息。

Java DSL 中的基本示例

import org.apache.camel.util.jsse.KeyStoreParameters;
import org.apache.camel.component.crypto.cms.sig.DefaultSignerInfo;
...
KeyStoreParameters keystore  = new KeyStoreParameters();
keystore.setType("JCEKS");
keystore.setResource("keystore/keystore.jceks);
keystore.setPassword("some_password"); // this password will also be used for accessing the private key if not specified in the signerInfo1 bean

//Signer Information, by default the following signed attributes are included: contentType, signingTime, messageDigest, and cmsAlgorithmProtect; by default no unsigned attribute is included.
// If you want to add your own signed attributes or unsigned attributes, see methods DefaultSignerInfo.setSignedAttributeGenerator and DefaultSignerInfo.setUnsignedAttributeGenerator.
DefaultSignerInfo signerInfo1 = new DefaultSignerInfo();
signerInfo1.setIncludeCertificates(true); // if set to true then the certificate chain of the private key will be added to the Signed Data object
signerInfo1.setSignatureAlgorithm("SHA256withRSA"); // signature algorithm; attention, the signature algorithm must fit to the signer private key.
signerInfo1.setPrivateKeyAlias("rsa"); // alias of the private key used for the signing
signerInfo1.setPassword("private_key_pw".toCharArray()); // optional parameter, if not set then the password of the KeyStoreParameters will be used for accessing the private key
signerInfo1.setKeyStoreParameters(keystore);

simpleReg.put("keyStoreParameters", keystore); //register keystore in the registry
simpleReg.put("signer1", signerInfo1); //register signer info in the registry

from("direct:start")
    .to("crypto-cms:sign://testsign?signer=#signer1&includeContent=true&toBase64=true")
    .to("crypto-cms:verify://testverify?keyStoreParameters=#keyStoreParameters&fromBase64=true"")
    .to("mock:result");

Spring XML 中的基本示例

   <keyStoreParameters xmlns="http://camel.apache.org/schema/spring"
        id="keyStoreParameters1" resource="./keystore/keystore.jceks"
        password="some_password" type="JCEKS" />
    <bean id="signer1"
        class="org.apache.camel.component.crypto.cms.sig.DefaultSignerInfo">
        <property name="keyStoreParameters" ref="keyStoreParameters1" />
        <property name="privateKeyAlias" value="rsa" />
        <property name="signatureAlgorithm" value="SHA256withRSA" />
        <property name="includeCertificates" value="true" />
        <!-- optional parameter 'password', if not set then the password of the KeyStoreParameters will be used for accessing the private key -->
        <property name="password" value="private_key_pw" />
    </bean>
...
    <route>
        <from uri="direct:start" />
        <to uri="crypto-cms:sign://testsign?signer=#signer1&amp;includeContent=true&amp;toBase64=true" />
        <to uri="crypto-cms:verify://testverify?keyStoreParameters=#keyStoreParameters1&amp;fromBase64=true" />
        <to uri="mock:result" />
    </route>

Java DSL 中有两个签名者示例

import org.apache.camel.util.jsse.KeyStoreParameters;
import org.apache.camel.component.crypto.cms.sig.DefaultSignerInfo;
...
KeyStoreParameters keystore  = new KeyStoreParameters();
keystore.setType("JCEKS");
keystore.setResource("keystore/keystore.jceks);
keystore.setPassword("some_password"); // this password will also be used for accessing the private key if not specified in the signerInfo1 bean

//Signer Information, by default the following signed attributes are included: contentType, signingTime, messageDigest, and cmsAlgorithmProtect; by default no unsigned attribute is included.
// If you want to add your own signed attributes or unsigned attributes, see methods DefaultSignerInfo.setSignedAttributeGenerator and DefaultSignerInfo.setUnsignedAttributeGenerator.
DefaultSignerInfo signerInfo1 = new DefaultSignerInfo();
signerInfo1.setIncludeCertificates(true); // if set to true then the certificate chain of the private key will be added to the Signed Data object
signerInfo1.setSignatureAlgorithm("SHA256withRSA"); // signature algorithm; attention, the signature algorithm must fit to the signer private key.
signerInfo1.setPrivateKeyAlias("rsa"); // alias of the private key used for the signing
signerInfo1.setPassword("private_key_pw".toCharArray()); // optional parameter, if not set then the password of the KeyStoreParameters will be used for accessing the private key
signerInfo1.setKeyStoreParameters(keystore);

DefaultSignerInfo signerInfo2 = new DefaultSignerInfo();
signerInfo2.setIncludeCertificates(true);
signerInfo2.setSignatureAlgorithm("SHA256withDSA");
signerInfo2.setPrivateKeyAlias("dsa");
signerInfo2.setKeyStoreParameters(keystore);


simpleReg.put("keyStoreParameters", keystore); //register keystore in the registry
simpleReg.put("signer1", signerInfo1); //register signer info in the registry
simpleReg.put("signer2", signerInfo2); //register signer info in the registry

from("direct:start")
    .to("crypto-cms:sign://testsign?signer=#signer1&signer=#signer2&includeContent=true")
    .to("crypto-cms:verify://testverify?keyStoreParameters=#keyStoreParameters")
    .to("mock:result");

在 Spring XML 中使用两个 Signers 的示例

   <keyStoreParameters xmlns="http://camel.apache.org/schema/spring"
        id="keyStoreParameters1" resource="./keystore/keystore.jceks"
        password="some_password" type="JCEKS" />
    <bean id="signer1"
        class="org.apache.camel.component.crypto.cms.sig.DefaultSignerInfo">
        <property name="keyStoreParameters" ref="keyStoreParameters1" />
        <property name="privateKeyAlias" value="rsa" />
        <property name="signatureAlgorithm" value="SHA256withRSA" />
        <property name="includeCertificates" value="true" />
        <!-- optional parameter 'password', if not set then the password of the KeyStoreParameters will be used for accessing the private key -->
        <property name="password" value="private_key_pw" />
    </bean>
    <bean id="signer2"
        class="org.apache.camel.component.crypto.cms.sig.DefaultSignerInfo">
        <property name="keyStoreParameters" ref="keyStoreParameters1" />
        <property name="privateKeyAlias" value="dsa" />
        <property name="signatureAlgorithm" value="SHA256withDSA" />
        <!-- optional parameter 'password', if not set then the password of the KeyStoreParameters will be used for accessing the private key -->
        <property name="password" value="private_key_pw2" />
    </bean>
...
    <route>
        <from uri="direct:start" />
        <to uri="crypto-cms:sign://testsign?signer=#signer1&amp;signer=#signer2&amp;includeContent=true" />
        <to uri="crypto-cms:verify://testverify?keyStoreParameters=#keyStoreParameters1" />
        <to uri="mock:result" />
    </route>

Java DSL 中的分离签名示例

import org.apache.camel.util.jsse.KeyStoreParameters;
import org.apache.camel.component.crypto.cms.sig.DefaultSignerInfo;
...
KeyStoreParameters keystore  = new KeyStoreParameters();
keystore.setType("JCEKS");
keystore.setResource("keystore/keystore.jceks);
keystore.setPassword("some_password"); // this password will also be used for accessing the private key if not specified in the signerInfo1 bean

//Signer Information, by default the following signed attributes are included: contentType, signingTime, messageDigest, and cmsAlgorithmProtect; by default no unsigned attribute is included.
// If you want to add your own signed attributes or unsigned attributes, see methods DefaultSignerInfo.setSignedAttributeGenerator and DefaultSignerInfo.setUnsignedAttributeGenerator.
DefaultSignerInfo signerInfo1 = new DefaultSignerInfo();
signerInfo1.setIncludeCertificates(true); // if set to true then the certificate chain of the private key will be added to the Signed Data object
signerInfo1.setSignatureAlgorithm("SHA256withRSA"); // signature algorithm; attention, the signature algorithm must fit to the signer private key.
signerInfo1.setPrivateKeyAlias("rsa"); // alias of the private key used for the signing
signerInfo1.setPassword("private_key_pw".toCharArray()); // optional parameter, if not set then the password of the KeyStoreParameters will be used for accessing the private key
signerInfo1.setKeyStoreParameters(keystore);

simpleReg.put("keyStoreParameters", keystore); //register keystore in the registry
simpleReg.put("signer1", signerInfo1); //register signer info in the registry

from("direct:start")
     //with the option includeContent=false the SignedData object without the signed text will be written into the header "CamelCryptoCmsSignedData"
    .to("crypto-cms:sign://testsign?signer=#signer1&includeContent=false&toBase64=true")
    //the verifier reads the Signed Data object form the header CamelCryptoCmsSignedData and assumes that the signed content is in the message body
    .to("crypto-cms:verify://testverify?keyStoreParameters=#keyStoreParameters&signedDataHeaderBase64=true")
    .to("mock:result");

Spring XML 中的分离签名示例

   <keyStoreParameters xmlns="http://camel.apache.org/schema/spring"
        id="keyStoreParameters1" resource="./keystore/keystore.jceks"
        password="some_password" type="JCEKS" />
    <bean id="signer1"
        class="org.apache.camel.component.crypto.cms.sig.DefaultSignerInfo">
        <property name="keyStoreParameters" ref="keyStoreParameters1" />
        <property name="privateKeyAlias" value="rsa" />
        <property name="signatureAlgorithm" value="SHA256withRSA" />
        <property name="includeCertificates" value="true" />
        <!-- optional parameter 'password', if not set then the password of the KeyStoreParameters will be used for accessing the private key -->
        <property name="password" value="private_key_pw" />
    </bean>
...
    <route>
        <from uri="direct:start" />
        <!-- with the option includeContent=false the SignedData object without the signed text will be written into the header "CamelCryptoCmsSignedData" -->
        <to uri="crypto-cms:sign://testsign?signer=#signer1&amp;includeContent=false&amp;toBase64=true" />
        <!-- the verifier reads the Signed Data object form the header CamelCryptoCmsSignedData and assumes that the signed content is in the message body -->
        <to uri="crypto-cms:verify://testverify?keyStoreParameters=#keyStoreParameters1&amp;signedDataHeaderBase64=true" />
        <to uri="mock:result" />
    </route>