Rechercher

Ce contenu n'est pas disponible dans la langue sélectionnée.

Chapter 11. Migrating

download PDF
Important

The Red Hat OpenShift distributed tracing platform (Jaeger) is a deprecated feature. Deprecated functionality is still included in OpenShift Container Platform and continues to be supported; however, it will be removed in a future release of this product and is not recommended for new deployments.

For the most recent list of major functionality that has been deprecated or removed within OpenShift Container Platform, refer to the Deprecated and removed features section of the OpenShift Container Platform release notes.

If you are already using the Red Hat OpenShift distributed tracing platform (Jaeger) for your applications, you can migrate to the Red Hat build of OpenTelemetry, which is based on the OpenTelemetry open-source project.

The Red Hat build of OpenTelemetry provides a set of APIs, libraries, agents, and instrumentation to facilitate observability in distributed systems. The OpenTelemetry Collector in the Red Hat build of OpenTelemetry can ingest the Jaeger protocol, so you do not need to change the SDKs in your applications.

Migration from the distributed tracing platform (Jaeger) to the Red Hat build of OpenTelemetry requires configuring the OpenTelemetry Collector and your applications to report traces seamlessly. You can migrate sidecar and sidecarless deployments.

11.1. Migrating with sidecars

The Red Hat build of OpenTelemetry Operator supports sidecar injection into deployment workloads, so you can migrate from a distributed tracing platform (Jaeger) sidecar to a Red Hat build of OpenTelemetry sidecar.

Prerequisites

  • The Red Hat OpenShift distributed tracing platform (Jaeger) is used on the cluster.
  • The Red Hat build of OpenTelemetry is installed.

Procedure

  1. Configure the OpenTelemetry Collector as a sidecar.

    apiVersion: opentelemetry.io/v1alpha1
    kind: OpenTelemetryCollector
    metadata:
      name: otel
      namespace: <otel-collector-namespace>
    spec:
      mode: sidecar
      config: |
        receivers:
          jaeger:
            protocols:
              grpc: {}
              thrift_binary: {}
              thrift_compact: {}
              thrift_http: {}
        processors:
          batch: {}
          memory_limiter:
            check_interval: 1s
            limit_percentage: 50
            spike_limit_percentage: 30
          resourcedetection:
            detectors: [openshift]
            timeout: 2s
        exporters:
          otlp:
            endpoint: "tempo-<example>-gateway:8090" 1
            tls:
              insecure: true
        service:
          pipelines:
            traces:
              receivers: [jaeger]
              processors: [memory_limiter, resourcedetection, batch]
              exporters: [otlp]
    1
    This endpoint points to the Gateway of a TempoStack instance deployed by using the <example> Tempo Operator.
  2. Create a service account for running your application.

    apiVersion: v1
    kind: ServiceAccount
    metadata:
      name: otel-collector-sidecar
  3. Create a cluster role for the permissions needed by some processors.

    apiVersion: rbac.authorization.k8s.io/v1
    kind: ClusterRole
    metadata:
      name: otel-collector-sidecar
    rules:
      1
    - apiGroups: ["config.openshift.io"]
      resources: ["infrastructures", "infrastructures/status"]
      verbs: ["get", "watch", "list"]
    1
    The resourcedetectionprocessor requires permissions for infrastructures and infrastructures/status.
  4. Create a ClusterRoleBinding to set the permissions for the service account.

    apiVersion: rbac.authorization.k8s.io/v1
    kind: ClusterRoleBinding
    metadata:
      name: otel-collector-sidecar
    subjects:
    - kind: ServiceAccount
      name: otel-collector-deployment
      namespace: otel-collector-example
    roleRef:
      kind: ClusterRole
      name: otel-collector
      apiGroup: rbac.authorization.k8s.io
  5. Deploy the OpenTelemetry Collector as a sidecar.
  6. Remove the injected Jaeger Agent from your application by removing the "sidecar.jaegertracing.io/inject": "true" annotation from your Deployment object.
  7. Enable automatic injection of the OpenTelemetry sidecar by adding the sidecar.opentelemetry.io/inject: "true" annotation to the .spec.template.metadata.annotations field of your Deployment object.
  8. Use the created service account for the deployment of your application to allow the processors to get the correct information and add it to your traces.

11.2. Migrating without sidecars

You can migrate from the distributed tracing platform (Jaeger) to the Red Hat build of OpenTelemetry without sidecar deployment.

Prerequisites

  • The Red Hat OpenShift distributed tracing platform (Jaeger) is used on the cluster.
  • The Red Hat build of OpenTelemetry is installed.

Procedure

  1. Configure OpenTelemetry Collector deployment.
  2. Create the project where the OpenTelemetry Collector will be deployed.

    apiVersion: project.openshift.io/v1
    kind: Project
    metadata:
      name: observability
  3. Create a service account for running the OpenTelemetry Collector instance.

    apiVersion: v1
    kind: ServiceAccount
    metadata:
      name: otel-collector-deployment
      namespace: observability
  4. Create a cluster role for setting the required permissions for the processors.

    apiVersion: rbac.authorization.k8s.io/v1
    kind: ClusterRole
    metadata:
      name: otel-collector
    rules:
      1
      2
    - apiGroups: ["", "config.openshift.io"]
      resources: ["pods", "namespaces", "infrastructures", "infrastructures/status"]
      verbs: ["get", "watch", "list"]
    1
    Permissions for the pods and namespaces resources are required for the k8sattributesprocessor.
    2
    Permissions for infrastructures and infrastructures/status are required for resourcedetectionprocessor.
  5. Create a ClusterRoleBinding to set the permissions for the service account.

    apiVersion: rbac.authorization.k8s.io/v1
    kind: ClusterRoleBinding
    metadata:
      name: otel-collector
    subjects:
    - kind: ServiceAccount
      name: otel-collector-deployment
      namespace: observability
    roleRef:
      kind: ClusterRole
      name: otel-collector
      apiGroup: rbac.authorization.k8s.io
  6. Create the OpenTelemetry Collector instance.

    Note

    This collector will export traces to a TempoStack instance. You must create your TempoStack instance by using the Red Hat Tempo Operator and place here the correct endpoint.

    apiVersion: opentelemetry.io/v1alpha1
    kind: OpenTelemetryCollector
    metadata:
      name: otel
      namespace: observability
    spec:
      mode: deployment
      serviceAccount: otel-collector-deployment
      config: |
        receivers:
          jaeger:
            protocols:
              grpc: {}
              thrift_binary: {}
              thrift_compact: {}
              thrift_http: {}
        processors:
          batch: {}
          k8sattributes:
          memory_limiter:
            check_interval: 1s
            limit_percentage: 50
            spike_limit_percentage: 30
          resourcedetection:
            detectors: [openshift]
        exporters:
          otlp:
            endpoint: "tempo-example-gateway:8090"
            tls:
              insecure: true
        service:
          pipelines:
            traces:
              receivers: [jaeger]
              processors: [memory_limiter, k8sattributes, resourcedetection, batch]
              exporters: [otlp]
  7. Point your tracing endpoint to the OpenTelemetry Operator.
  8. If you are exporting your traces directly from your application to Jaeger, change the API endpoint from the Jaeger endpoint to the OpenTelemetry Collector endpoint.

    Example of exporting traces by using the jaegerexporter with Golang

    exp, err := jaeger.New(jaeger.WithCollectorEndpoint(jaeger.WithEndpoint(url))) 1

    1
    The URL points to the OpenTelemetry Collector API endpoint.
Red Hat logoGithubRedditYoutubeTwitter

Apprendre

Essayez, achetez et vendez

Communautés

À propos de la documentation Red Hat

Nous aidons les utilisateurs de Red Hat à innover et à atteindre leurs objectifs grâce à nos produits et services avec un contenu auquel ils peuvent faire confiance.

Rendre l’open source plus inclusif

Red Hat s'engage à remplacer le langage problématique dans notre code, notre documentation et nos propriétés Web. Pour plus de détails, consultez leBlog Red Hat.

À propos de Red Hat

Nous proposons des solutions renforcées qui facilitent le travail des entreprises sur plusieurs plates-formes et environnements, du centre de données central à la périphérie du réseau.

© 2024 Red Hat, Inc.