第4章 Network policies

4.1. About network policies
リンクのコピー

Learn how network policies work for MicroShift to restrict or allow network traffic to pods in your node.

4.1.1. How network policy works in MicroShift
リンクのコピー

In a node that is using the default OVN-Kubernetes Container Network Interface (CNI) plugin for MicroShift, network isolation is controlled by both firewalld, which is configured on the host, and by NetworkPolicy objects created within MicroShift. Simultaneous use of firewalld and NetworkPolicy is supported.

Network policies work only within boundaries of OVN-Kubernetes-controlled traffic, so they can apply to every situation except for hostPort/hostNetwork enabled pods.
Firewalld settings also do not apply to hostPort/hostNetwork enabled pods.
Firewalld rules run before any NetworkPolicy is enforced.

警告

Network policy does not apply to the host network namespace. Pods with host networking enabled are unaffected by network policy rules. However, pods connecting to the host-networked pods might be affected by the network policy rules.

Network policies cannot block traffic from localhost.

By default, all pods in a MicroShift node are accessible from other pods and network endpoints. To isolate one or more pods in a node, you can create NetworkPolicy objects to indicate allowed incoming connections. You can create and delete NetworkPolicy objects.

If a pod is matched by selectors in one or more NetworkPolicy objects, then the pod accepts only connections that are allowed by at least one of those NetworkPolicy objects. A pod that is not selected by any NetworkPolicy objects is fully accessible.

A network policy applies to only the TCP, UDP, ICMP, and SCTP protocols. Other protocols are not affected.

The following example NetworkPolicy objects demonstrate supporting different scenarios:

Deny all traffic:

To make a project deny by default, add a NetworkPolicy object that matches all pods but accepts no traffic:

kind: NetworkPolicy
apiVersion: networking.k8s.io/v1
metadata:
  name: deny-by-default
spec:
  podSelector: {}
  ingress: []

Allow connections from the default router, which is the ingress in MicroShift:

To allow connections from the MicroShift default router, add the following NetworkPolicy object:

apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  name: allow-from-openshift-ingress
spec:
  ingress:
  - from:
    - namespaceSelector:
        matchLabels:
          ingresscontroller.operator.openshift.io/deployment-ingresscontroller: default
  podSelector: {}
  policyTypes:
  - Ingress

Only accept connections from pods within the same namespace:
To make pods accept connections from other pods in the same namespace, but reject all other connections from pods in other namespaces, add the following NetworkPolicy object:
```
kind: NetworkPolicy
apiVersion: networking.k8s.io/v1
metadata:
  name: allow-same-namespace
spec:
  podSelector: {}
  ingress:
  - from:
    - podSelector: {}
```

Only allow HTTP and HTTPS traffic based on pod labels:

To enable only HTTP and HTTPS access to the pods with a specific label (role=frontend in following example), add a NetworkPolicy object similar to the following:

kind: NetworkPolicy
apiVersion: networking.k8s.io/v1
metadata:
  name: allow-http-and-https
spec:
  podSelector:
    matchLabels:
      role: frontend
  ingress:
  - ports:
    - protocol: TCP
      port: 80
    - protocol: TCP
      port: 443

Accept connections by using both namespace and pod selectors:

To match network traffic by combining namespace and pod selectors, you can use a NetworkPolicy object similar to the following:

kind: NetworkPolicy
apiVersion: networking.k8s.io/v1
metadata:
  name: allow-pod-and-namespace-both
spec:
  podSelector:
    matchLabels:
      name: test-pods
  ingress:
    - from:
      - namespaceSelector:
          matchLabels:
            project: project_name
        podSelector:
          matchLabels:
            name: test-pods

NetworkPolicy objects are additive, which means you can combine multiple NetworkPolicy objects together to satisfy complex network requirements.

For example, for the NetworkPolicy objects defined in previous examples, you can define both allow-same-namespace and allow-http-and-https policies. That configuration allows the pods with the label role=frontend to accept any connection allowed by each policy. That is, connections on any port from pods in the same namespace, and connections on ports 80 and 443 from pods in any namespace.

4.1.2. Optimizations for network policy with OVN-Kubernetes network plugin
リンクのコピー

When designing your network policy, refer to the following guidelines:

For network policies with the same spec.podSelector spec, it is more efficient to use one network policy with multiple ingress or egress rules, than multiple network policies with subsets of ingress or egress rules.

Every ingress or egress rule based on the podSelector or namespaceSelector spec generates the number of OVS flows proportional to number of pods selected by network policy + number of pods selected by ingress or egress rule. Therefore, it is preferable to use the podSelector or namespaceSelector spec that can select as many pods as you need in one rule, instead of creating individual rules for every pod.

For example, the following policy contains two rules:

apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  name: test-network-policy
spec:
  podSelector: {}
  ingress:
  - from:
    - podSelector:
        matchLabels:
          role: frontend
  - from:
    - podSelector:
        matchLabels:
          role: backend

The following policy expresses those same two rules as one:

apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  name: test-network-policy
spec:
  podSelector: {}
  ingress:
  - from:
    - podSelector:
        matchExpressions:
        - {key: role, operator: In, values: [frontend, backend]}

The same guideline applies to the spec.podSelector spec. If you have the same ingress or egress rules for different network policies, it might be more efficient to create one network policy with a common spec.podSelector spec. For example, the following two policies have different rules:

apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  name: policy1
spec:
  podSelector:
    matchLabels:
      role: db
  ingress:
  - from:
    - podSelector:
        matchLabels:
          role: frontend
---
apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  name: policy2
spec:
  podSelector:
    matchLabels:
      role: client
  ingress:
  - from:
    - podSelector:
        matchLabels:
          role: frontend

The following network policy expresses those same two rules as one:

apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  name: policy3
spec:
  podSelector:
    matchExpressions:
    - {key: role, operator: In, values: [db, client]}
  ingress:
  - from:
    - podSelector:
        matchLabels:
          role: frontend

You can apply this optimization when only multiple selectors are expressed as one. In cases where selectors are based on different labels, it may not be possible to apply this optimization. In those cases, consider applying some new labels for network policy optimization specifically.

4.1.2.1. NetworkPolicy CR and external IPs in OVN-Kubernetes
リンクのコピー

In OVN-Kubernetes, the NetworkPolicy custom resource (CR) enforces strict isolation rules. If a service is exposed using an external IP, a network policy can block access from other namespaces unless explicitly configured to allow traffic.

To allow access to external IPs across namespaces, create a NetworkPolicy CR that explicitly permits ingress from the required namespaces and ensures traffic is allowed to the designated service ports. Without allowing traffic to the required ports, access might still be restricted.

Example output

  apiVersion: networking.k8s.io/v1
  kind: NetworkPolicy
  metadata:
    annotations:
    name: <policy_name>
    namespace: openshift-ingress
  spec:
    ingress:
    - ports:
      - port: 80
        protocol: TCP
    - ports:
      - port: 443
        protocol: TCP
    - from:
      - namespaceSelector:
          matchLabels:
          kubernetes.io/metadata.name: <my_namespace>
    podSelector: {}
    policyTypes:
    - Ingress

where:

<policy_name>: Specifies your name for the policy.
<my_namespace>: Specifies the name of the namespace where the policy is deployed.

For more details, see "About network policy".

第4章 Network policies

4.1. About network policies
リンクのコピー

4.1.1. How network policy works in MicroShift
リンクのコピー

4.1.2. Optimizations for network policy with OVN-Kubernetes network plugin
リンクのコピー

4.1.2.1. NetworkPolicy CR and external IPs in OVN-Kubernetes
リンクのコピー

詳細情報

試用、購入および販売

コミュニティー

会社概要

多様性を受け入れるオープンソースの強化

Red Hat ドキュメントについて

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links

第4章 Network policies

4.1. About network policiesリンクのコピーリンクがクリップボードにコピーされました!

4.1.1. How network policy works in MicroShiftリンクのコピーリンクがクリップボードにコピーされました!

4.1.2. Optimizations for network policy with OVN-Kubernetes network pluginリンクのコピーリンクがクリップボードにコピーされました!

4.1.2.1. NetworkPolicy CR and external IPs in OVN-Kubernetesリンクのコピーリンクがクリップボードにコピーされました!

詳細情報

試用、購入および販売

コミュニティー

会社概要

多様性を受け入れるオープンソースの強化

Red Hat ドキュメントについて

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links

4.1. About network policies
リンクのコピー

4.1.1. How network policy works in MicroShift
リンクのコピー

4.1.2. Optimizations for network policy with OVN-Kubernetes network plugin
リンクのコピー

4.1.2.1. NetworkPolicy CR and external IPs in OVN-Kubernetes
リンクのコピー